How can we cut to zero writing on the OS SSD hard disk?

I am on Win 8.1. I would like to put every temp file writing on another hard disk than the OS SSD.
An automated application would be good for that, or an option for that.
I found two articles about that.
1) http://www.makeuseof.com/tag/3-top-tips-maintain-performance-extend-life-ssd-si/
where it says: Use Firefox Memory (RAM) Cache
In Firefox, type about:config in address bar and hit Enter. Promise to be careful, then search and double-click browser.cache.disk.enable and set value to False. Right-click anywhere and select > New > Integer and set the Preference Name to disk.cache.memory.capacity with a value of 32768 for 32MB and 65536 for 64MB etc., depending on the size in MB you want to reserve for the browser cache. Restart Firefox for changes to come into effect.
I do not catch the logic of it and I want to not just pot a small amount of MB on the disk but zero, and put some MB to another disk. I did it.
Is it easy the cancel that modif by just deleting the newly created var and re enabling the cache?
The 2nd article about it was on your support forum:
https://support.mozilla.org/en-US/questions/1019042
But the procedure is not clear enough for me.
That is why a built in option would be better for addressing the reality of using SSDs for improving performance.
Thanks
Marc

But... if you want ZERO writes you need to move more than your cache folder. Firefox updates your settings (profile) folder as often as every 15 seconds as it maintains your session history (open and recently closed windows and tabs). So you would need to move your entire profile.
I've never done it and I'm not sure we can fully support it on this site, but on the community-driven mozillaZine site there is an article: http://kb.mozillazine.org/Moving_your_profile_folder
Note that there may be permission issues with downloads, since Firefox uses the Windows Temp folder as an intermediary location. You might want to experiment with a new profile to make sure it works in the new location before moving your existing profile.
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > Run:
firefox.exe -P
''Do not delete anything here.'' Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button. When you see the option to choose a non-default location, you can point Firefox to your spinning drive. To avoid data loss, never re-use an existing folder. Then start Firefox in the new profile you created.
Can you get down to zero use of the SSD? Any complications?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

Similar Messages

  • How can i transfer all my data 250 GB from external hard disk to MAC pro

    How can i transfer all my data 250 GB from external hard disk to MAC pro

    The simple answer is just connect the external hard drive and drag the files from there to wherever you want them to go. If you need to do something more specific, you'll have to provide more details.

  • How can I download all my iTunes music after wiping my hard disk without going into each of the 100  artists listed

    Hi - I have recently had to wipe my hard disk which meant all my music has gone with it so I have an empty iTunes music library.
    The only way I can see of doing it is
    - going to the store
    - selecting Purchased
    - then I get a list of artists or albums down the left hand side
    - have to select each individually and click Download All on the bottom left - for over 100+ its going to take forever ! Is there an easier way ?????
    Thanks !

    You can only sync your device to one iTunes library at a time. You can either copy the music from the library on your other computer to the one you have loaded the new CDs onto, or you can purchase an external CD Drive and load them to the iTunes library you are currently sync'd with:
    iTunes: How to move your music to a new computer
    http://store.apple.com/us/search/External-CD-DVD---SuperDrive
    For syncing, I am not familiar with the drag and drop method. I have always used the normal sync process:
    iTunes 12 for Mac: Sync iPod, iPhone, or iPad
    iTunes 12 for Windows: Sync iPod, iPhone, or iPad
    Cheers,
    GB

  • How can I cut and splice audio on the new version of garage band?

       I used to be able to precisely cut and splice audio files on the older versions of garage band. now this whole new version wont let me. the flexwave thing or whatever has taken its place! help please?

    DonnyBro wrote:
    the flexwave thing or whatever has taken its place!
    http://www.bulletsandbones.com/GB/GBFAQ.html#noflex
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I back up files onto an external if my hard disk can't be verified?

    Hi all,
    My Macbook Pro (2010) hangs up at the grey startup screen. The icon keeps spinning. I believe this may be because the laptop ran out of power during critical software updates. I have been able to reach disk utility by starting up with the original installation cd and holding 'c'. When I verify the disk, I get an error:
    "The volume could not be verified completely.
    Error: The disk needs to be repaired. Click Repair Disk."
    When I click repair disk, I get the following message:
    "Verify and Repair volume "disk0s2"
    Checking Journaled HFS Plus volume
    Invalid node structure
    The volume could not be verified completely.
    Volume repair complete.
    Updating boot support partitions for the volume as required.
    Error: Disk Utility can't repair this disk.. disk, and restore your backed-up files."
    My hard drive isn't fully backed up and I would like to retrieve as many files as possible before reformatting the hard drive.
    I have heard of being able to access the hard drive through other means (connecting the drive to another computer and/or another external) and being able to salvage files. What is the best recommendation for this?
    Should I get Diskwarrior?
    similar issue: http://www.megaleecher.net/Fix_Invalid_Node_Structure#axzz3L3IfWSbf

    OK. You need to repartition your drive, I'm afraid, assuming the drive is OK. You have an installer DVD in the optical drive bay so do this:
    Booting From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
    Drive Partition and Format
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Upon completion quit Disk Utility and return to the installer. Proceed to install Snow Leopard.
    After installing and booting from Snow Leopard you should update it by downloading and instalingl the Mac OS X 10.6.8 Update Combo v1.1. If you wish to you can now upgrade to Lion or later from the App Store.

  • How can i install mac os when i already erased my hard disk and no way to go back to my mac i'm in did erased by conrol key r then i can't do anything i have four choices restore back up,reinstall ,get help online here where i'm using the broswer and disk

    when i tried to reinstall from that option and i entered my apple id it says that i need apple id that was used to purchase lion,
    i have no cd for that when i bought it.i am using macbook pro.
    i can's use my mac anymore i am using it by clicking on control and key R when i on then i use get help online to get help like now.
    i have no back up too.
    what can i do in this situaion .

    Try CMD+R. That will restore the latest version you were running.

  • How can I transfer my pictures in Ipad or Mac to hard disk?

    trying to upload the 26 GB pictures to hard disk,appreciate your support there

    See here: http://support.apple.com/kb/HT4083

  • In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    If you think this is a bug, you can report it here:
    Apple - Mac OS X - Feedback

  • Does anyone knows how can I get a thorough guide (not the "short-cut" one) to OS X Lion?

    Does anyone knows how can I get a thorough guide (not the "short-cut" one) to OS X Lion?

    Try Amazon.com. Look for The Missing Manual for Lion.

  • Edit is greyed out, how can I cut and paste

    when I want to copy something from a web page, I click on the orange "Firefox" but the edit option is greyed out and not usable. How can I cut, copy, and paste in this new format?

    You can do one of the following after you have highlighted what you want to copy:
    *click the Firefox button, the middle icon (looks like 2 pages with folded corners) will be available for clicking; that icon is "Copy" if you rest your cursor over the icon
    *click the Firefox button, click the small triangle at the far right of Edit, click "Copy"
    *in Windows, click Ctrl+C to "Copy" (Ctrl+V will "Paste")
    I have "Copy", "Paste" and "Cut" buttons on the Customize Palette which you can drag to a toolbar. To open the Customize toolbar window, click Firefox button > Options > Toolbar Layout; if using the Menu Bar, click View > Toolbars > Customize.
    *see: http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
    <br />
    <br />
    '''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
    *Adobe PDF Plug-In For Firefox and Netscape
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
    #**Use either of the links below:
    #***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
    #***''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #*After the installation, start Firefox and check your version again.

  • How can I cut a page out of Preview document?

    I scanned in three pages, but only want pages 1 & 3. How can I cut page 2 out?

    In Preview you can open the toolbar with shift command | (pipe)
    or Preview>View>show tool bar
    here you can show the thumbnails.  Highlite your page and delete.

  • How can I cut a picture to a desired pixel size quickly?

    How can I cut a picture to a desired pixel size quickly? e.g. 600x600 pixel? I know the "cut" tool, but how can I cut it quickly to that exact size without having to cut and cut, is there a tool for cutting to a specific pixel size?
    THANKs

    Your "cheap" version of Photoshop is not Photoshop proper at all, nor was it just cheap.  It was actually a freebie, given away for free with some scanners and certain cameras.  It is as old as the hills, totally obsolete and unsupported.
    We don't normally deal with that here in the Photoshop forum and I doubt many users here will be familiar with Photoshop 5.0 L.E.
    Personally, I only have a faint recollection of having received bundled with my first scanner, and cannot honestly at this point tell you what it supported and what it did not.
    Sorry.

  • How can i avoid leading zeros for a field in smartform?

    how can i avoid leading zeros for a field in smartform?

    Hi,
    Using the Symbols.
    &symbol(Z)&  Omit Leading Zeros  &symbol(S)&  Omit Leading Sign 
    &symbol(<)&  Display Leading Sign to the Left 
    &symbol(>)&  Display Leading Sign to the Right 
    &symbol(C)&  Compress Spaces 
    &symbol(.N)&  Display upto N decimal places 
    &symbol(T)&  Omit thousands separator 
    &symbol(R)&  Right justified 
    &symbol(I)&  Suppress output of the initial value 
    Regards,
    Shiva Kumar

  • How can i cut the audio from 1 file and put it on another?

    I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
    btw i have quicktime pro is that changes anything

    Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
    Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

  • How can I cut an  ellipse piece of a photo?

    Good evening.
    How can I cut an  ellipse piece of a photo?
    I have a photo and I would like  to cut an ellipse piece of it and after this I want to save on a new photo file.

    Hi there,
      To cut an image so that it has an ellipse shape, you would use the Elliptical Marquee tool.
      Open Photoshop, and open your photo file. Double click the photo layer in your Layers pallete to unlock the layer:
    Once you have double clicked the layer, a dialog box will come up asking you to specify certain properties such as changing the layer name, opacity, etc. You can change these if you'd like, but for now we're going to leave them in their default settings. Click "Ok" to proceed.
    Now that the layer is prepped and ready to be edited. Navigate to your toolbar. Find the Marquee toolbox, by default it should have the Rectangular Marquee tool set. To retrieve the Elliptical Marquee tool, click and hold down and a pop up window with more tools will appear. Select the Elliptical Marquee tool.
    Now, click and drag on your image to make an Ellipse. You will get a selection area marked by a perimeter of "marching ants" around the Ellipse selection:
    If you're on a PC, click CTRL + Shift + I to make an Inverse selection. If you're on a Mac, click CMD + Shift + I. This will select the outside area of the ellipse that we just drew with the Elliptical Marquee tool.
    Now click the Delete key on your keyboard. This will cut out the rest of the image and leave you with an Elliptical cut of your image!
    I hope this helps! Let me know if you need further clarification!

Maybe you are looking for

  • Best way to manage 8i and 9i databases?

    Hi, I'm looking for the best way to manage 8i, 9i, 10g and 11g databases with EM (of course, upgrading the 8i databases is not an option). I successfully installed OMS 12c, but the 12.1 agent will not connect to the 8i databases. What are the alterna

  • Console errors "Verification failed with 1 errors" and when Deleting Overrides

    Hi Guys, When trying to delete an override for a unix server I was prompted with this error: Note:  The following information was gathered when the operation was attempted.  The information may appear cryptic but provides context for the error.  The

  • How to export / analyze survey data?

    Hi, We have a very simple CRM implementation running, using surveys to interview partners every month. Now I want to either export the survey data to have simple reporting in e.g. MS Excel or have a simple way to run reports in CRM directly. Is there

  • Installation problems office 365

    Everytime i click the install button , safari says that it cannot connect to te office server . I've also tried using chrome . The problem persists . Does anyone have any suggestions ?

  • How to get into Z/OS

    Gurus: Your help is appreciated. I try to log into a Z/OS and get message as follows. Please help tell how to get into the system? Thanks! LOGON COREYZ                                        HCPLGA053E COREYZ not in CP directory                 Enter