How can we read archived sales order data?

Hi there,
We need information about sales orders, which are already archived (e.g. VBAK, VBAP).
How can we read these data from archive?
Do you know the necessary function modules?
Thanks a lot for help.

Hi,
The main transactions that provide access to sales orders data are the following:
VA03 Display Sales Order
ALO1 Document Relationship Browser
Other:
KABP Controlling Documents: Plan
KSB5 Controlling Documents: Actual
KVBI Sales Documents: Actual Line Items
Standard Reports:
S3VBAKAU: Program for sequential reading of archived sales documents
If at least one of the archiving information structures SAP_DRB_VBAK_01- SAP_DRB_VBAK_02 is active, I suggest to use the transaction ALO1.
More info can be found at:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/19/68c149815cfa4997525e0e7d7509bf/content.htm]
Regards,
Andrea

Similar Messages

How to retrieve the ARCHIVED Sales order data

Hi All,
When issuing the output for the delivery, it is giving an error saying 'Sales Order XXXX does not exist' due to which the prices in the output were displayed as '0'. Reason for this can be that 'the order might have been archived'.
My requirement is,
1. If Sales Order doesnu2019t exist in data base then need to check if Sales order exists in archive data base.
2. If yes, take needed data from archive data base tables to calculate price. The logic of price calculation should be the same as for not archived Sales Orders.
Can anyone help me on this..?
Please tell me how to check whether the Sales order exists in the Archived database. Please share the table names(sample logic if possible) sothat I can use them in the report logic.
Please tell me how to pull the data from the archive database tables to calculate the price.
Thank you in advance.
Thanks & Regards,
Paddu.
Edited by: Paddu K on Feb 23, 2009 3:42 PM

*&      Form get_archive_data
*       Fetch Archive Data
FORM get_archive_data .
CLEAR:    g_read_handle, g_commit_cnt,
            g_read_cnt, g_reload_cnt,it_rel_tab,it_bseg_a,it_bkpf_a,
            it_bset_a, gt_result.
REFRESH: it_rel_tab[],it_bseg_a[],it_bkpf_a[],
           it_bset_a[], gt_result[].
*Populating selection screen fields to field-symbols
PERFORM build_fs_select_options.
*Call FM as_api_read FI Data
CALL FUNCTION 'AS_API_READ'
    EXPORTING
      i_fieldcat                      = 'SAP_FI_DOC_002'
      i_selections                    = ft_selections[]
*   I_OBLIGATORY_FIELDS             =
*   I_MAXROWS                       =
   IMPORTING
     e_result                        = gt_result[]
EXCEPTIONS
   parameters_invalid              = 1
   no_infostruc_found              = 2
   field_missing_in_fieldcat       = 3
   OTHERS                          = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF NOT gt_result[] IS INITIAL.
*Sorting by KEY and Offset
    SORT gt_result BY archivekey archiveofs.
*To delete duplicates
    DELETE ADJACENT DUPLICATES FROM gt_result COMPARING archivekey
    archiveofs.
*looping the internal table
    LOOP AT gt_result.
*Get read handle for object
      CALL FUNCTION 'ARCHIVE_READ_OBJECT'
        EXPORTING
          object         = 'FI_DOCUMNT'
          archivkey      = gt_result-archivekey
          offset         = gt_result-archiveofs
        IMPORTING
          archive_handle = g_read_handle
        EXCEPTIONS
          OTHERS         = 1.
      IF NOT sy-subrc IS INITIAL.
        MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        EXIT.
      ENDIF.
      IF sy-subrc = 0.
*Get Acoounting Document details
        PERFORM object_read_opened
                  TABLES it_rel_tab
                         it_bseg_a
                         it_bkpf_a
*                         it_bset_a
*                         it_bsik_a
*                         it_bsak_a
                         it_bsid_a
                         it_bsad_a
*                         it_bsec_a
                  USING g_read_handle
                        l_archobj
                        g_commit_cnt
                        g_read_cnt
                        g_reload_cnt
      ENDIF.
*close the file.
      CALL FUNCTION 'ARCHIVE_CLOSE_FILE'
        EXPORTING
          archive_handle          = g_read_handle
        EXCEPTIONS
          internal_error          = 1
          wrong_access_to_archive = 2
          OTHERS                  = 3.
      IF sy-subrc <> 0.
        MESSAGE i004." 'Unable to close archive session'.
        EXIT.
      ENDIF.
    ENDLOOP.
ELSE.
    MESSAGE i000 WITH 'No data found for Archived data'(095).
    EXIT.
ENDIF.
*Start of Changes by GTHATIKONDA on 10/17/2008 #ECDK902204
IF NOT it_bkpf_a[] IS INITIAL.
    SORT it_bkpf_a BY belnr.
    DELETE ADJACENT DUPLICATES FROM it_bkpf_a COMPARING belnr.
    DELETE it_bkpf_a WHERE budat GT p_budat. "#ECDK902206
ENDIF.
*Start of Changes by GTHATIKONDA on 10/17/2008 #ECDK902206
IF it_bkpf_a[] IS INITIAL.
    MESSAGE i000 WITH 'No data found for Archived data'(095).
ENDIF.
*End of Changes by GTHATIKONDA on 10/17/2008 #ECDK902206
IF NOT it_bseg_a[] IS INITIAL.
    SORT it_bseg_a BY belnr gjahr buzei.
    DELETE ADJACENT DUPLICATES FROM it_bseg_a COMPARING
                                          belnr gjahr buzei.
ENDIF.
*End of Changes by GTHATIKONDA on 10/17/2008 #ECDK902204
ENDFORM.                    " get_archive_data
*&      Form build_fs_select_options
FORM build_fs_select_options .
REFRESH: ft_selections.
*Comapny code
APPEND INITIAL LINE TO ft_selections ASSIGNING <fw_selections>.
<fw_selections>-fieldname = 'BUKRS'.
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_bukrs TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Customer
APPEND INITIAL LINE TO ft_selections ASSIGNING <fw_selections>.
<fw_selections>-fieldname = 'KUNNR'.
LOOP AT s_kunnr.
    APPEND INITIAL LINE TO <fw_selections>-selopt_t
           ASSIGNING <lw_selopt>.
    MOVE-CORRESPONDING s_kunnr TO <lw_selopt>.
ENDLOOP.
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
**Customer Group
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'KTOKD'.
* loop at s_ktokd.
*    append initial line to <fw_selections>-selopt_t
*           assigning <lw_selopt>.
*    move-corresponding s_ktokd to <lw_selopt>.
* endloop.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
*Profit Center
APPEND INITIAL LINE TO ft_selections ASSIGNING <fw_selections>.
<fw_selections>-fieldname = 'PRCTR'.
LOOP AT s_prctr.
    APPEND INITIAL LINE TO <fw_selections>-selopt_t
           ASSIGNING <lw_selopt>.
    MOVE-CORRESPONDING s_prctr TO <lw_selopt>.
ENDLOOP.
*Commented #ECDK902210
**Key Date
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'BUDAT'.
* append initial line to <fw_selections>-selopt_t assigning <lw_selopt>
* move p_budat to <lw_selopt>-low.
* move 'I' to <lw_selopt>-sign.
* move 'EQ' to <lw_selopt>-option.
*Aging Period1
APPEND INITIAL LINE TO ft_selections ASSIGNING <fw_selections>.
<fw_selections>-fieldname = 'ANZTA'.
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag1 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Aging Period2
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'ANZTA'.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag2 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Aging Period3
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'ANZTA'.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag3 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Aging Period4
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'ANZTA'.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag4 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Aging Period5
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'ANZTA'.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag5 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
ENDFORM.                    " build_fs_select_options
*&      Form object_read_opened
*       To Fetch Arichive Data
FORM object_read_opened TABLES   it_rel_tab
                                  it_bseg_a
                                  it_bkpf_a
*                                  it_bset_a
*                                  it_bsik_a
*                                  it_bsak_a
                                  it_bsid_a
                                  it_bsad_a
*                                 it_bsec_a
                         USING value(g_read_handle) LIKE sy-tabix
                               value(l_archobj) LIKE arch_def-object
                         value(g_commit_cnt) LIKE arch_usr-arch_comit
                           g_read_cnt TYPE i
                           g_reload_cnt TYPE i.
DATA: BEGIN OF table_wa ,
           table LIKE arch_stat-tabname,
        END OF table_wa.
DATA: lit_data(2048) TYPE c OCCURS 1 WITH HEADER LINE.
DATA: l_structure LIKE arch_stat-tabname,
         l_lin TYPE i.
CLEAR: it_table_org1,lit_struc,it_table_org2,table_wa,it_rel_tab.
REFRESH: it_table_org1[],lit_struc[],it_table_org2[],it_rel_tab[].
CLEAR: g_duprec,g_read_cnt,g_reload_cnt,g_object_cnt.
*Read data from the infostructure
DO.
    ADD 1 TO g_object_cnt.
    CLEAR l_structure.
    CALL FUNCTION 'ARCHIVE_GET_NEXT_RECORD'
      EXPORTING
        archive_handle                = g_read_handle
     IMPORTING
       record                        = lit_data
*   RECORD_CURSOR                 =
*   RECORD_FLAGS                  =
       record_structure              = l_structure
*   RECORD_LENGTH                 =
*   RECORD_REF                    =
     EXCEPTIONS
       end_of_object                 = 1
       internal_error                = 2
       wrong_access_to_archive       = 3
       OTHERS                        = 4
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      EXIT.
    ENDIF.
    IF NOT l_structure IS INITIAL.
      table_wa-table = l_structure.
      APPEND table_wa TO it_rel_tab.
    ENDIF.
    APPEND lit_data.
    CLEAR l_lin.
    FIELD-SYMBOLS: <fs_struc> TYPE c.
    CASE l_structure.
*BKPF data
      WHEN 'BKPF'.
        ASSIGN it_bkpf_a TO <fs_struc> CASTING.
        <fs_struc> = lit_data.
        APPEND it_bkpf_a.
*BSID data
      WHEN 'BSID'.
        ASSIGN it_bsid_a TO <fs_struc> CASTING.
        <fs_struc> = lit_data.
        APPEND it_bsid_a.
*BSAD data
      WHEN 'BSAD'.
        ASSIGN it_bsad_a TO <fs_struc> CASTING.
        <fs_struc> = lit_data.
        APPEND it_bsad_a.
*BSEG data
      WHEN 'BSEG'.
        ASSIGN it_bseg_a TO <fs_struc> CASTING.
        <fs_struc> = lit_data.
        APPEND it_bseg_a.
    ENDCASE.
    REFRESH lit_data.
    CLEAR g_object_cnt.
ENDDO.
ENDFORM.                    " object_read_opened
*&      Form get_bsid_bsad_archive_data
*If Exclude Spl. GL Trnasaction is initial get BSID BSAD Archive data *
FORM get_bsid_bsad_archive_data .
*Work Area
DATA: wa_bsid TYPE type_bsid.
*Reading BSAD Archive internal table
*      loop at it_bsad_a   where bukrs eq p_bukrs
*Start of changes by GTHATIKONDA on 10/14/2008 #ECDK902180
*Commented by GTHATIKONDA on 10/17/2008 #ECDK902204
LOOP AT it_bkpf_a WHERE bukrs = p_bukrs AND
                            budat LE p_budat. "#ECDK902206
*End of changes by GTHATIKONDA on 10/14/2008 #ECDK902180
    LOOP AT it_bseg_a   WHERE bukrs EQ p_bukrs AND
                              belnr EQ it_bkpf_a-belnr AND
                              gjahr EQ it_bkpf_a-gjahr AND
                              augdt GT p_budat AND
*                            koart eq 'D'     and
                              kunnr IN s_kunnr AND
                              prctr IN s_prctr.
*Changes by GTHATIKONDA on 10/17/2008 #ECDK902204
*    loop at it_bkpf_a where budat le p_budat."#ECDK902206
*Move corresponding fiels
      MOVE-CORRESPONDING it_bseg_a TO wa_bsid.
      wa_bsid-blart = it_bkpf_a-blart.
      wa_bsid-budat = it_bkpf_a-budat.
      wa_bsid-bldat = it_bkpf_a-bldat.
      APPEND wa_bsid TO i_bsad.
      CLEAR wa_bsid.
    ENDLOOP.
ENDLOOP.
IF NOT i_bsad[] IS INITIAL.
    APPEND LINES OF i_bsad TO i_bsid.
ENDIF.
*Start of Changes by GTHATIKONDA on 10/17/2008 #ECDK902206
IF NOT i_bsid[] IS INITIAL.
    SORT i_bsid BY belnr.
*Commenting this logic by GTATIKONDA on 10/31/2008 #ECDK902245
* delete adjacent duplicates from i_bsid comparing belnr.
ENDIF.
*End of Changes by GTHATIKONDA on 10/17/2008 #ECDK902206
ENDFORM.                    " get_bsid_bsad_archive_data
*Reading BSAD Archive internal table
*      loop at it_bsad_a where bukrs eq p_bukrs
*Start of changes by GTHATIKONDA on 10/14/2008 #ECDK902180
*Commented by GTHATIKONDA on 10/17/2008 #ECDK902204
LOOP AT it_bkpf_a WHERE bukrs = p_bukrs AND "#ECDK902206
                           budat LE p_budat.
*End of changes by GTHATIKONDA on 10/14/2008 #ECDK902180
    LOOP AT it_bseg_a WHERE bukrs EQ p_bukrs AND
                             belnr EQ it_bkpf_a-belnr AND
                             gjahr EQ it_bkpf_a-gjahr AND
                             kunnr IN s_kunnr AND
                             umskz EQ space AND
                             augdt GT p_budat AND
                             prctr IN s_prctr.
*Changes by GTHATIKONDA on 10/17/2008 #ECDK902204
*    loop at it_bkpf_a where budat le p_budat. "#ECDK902206
*Move corresponding fiels
      MOVE-CORRESPONDING it_bseg_a TO wa_bsid.
      wa_bsid-blart = it_bkpf_a-blart.
      wa_bsid-budat = it_bkpf_a-budat.
      wa_bsid-bldat = it_bkpf_a-bldat.
      APPEND wa_bsid TO i_bsad.
      CLEAR wa_bsid.
    ENDLOOP.
ENDLOOP.
IF NOT i_bsad[] IS INITIAL.
    APPEND LINES OF i_bsad TO i_bsid.
ENDIF.

How can I create a sales order with reference to a purchase order?

How can I create a sales order with reference to a purchase order?
Thanks in advance...

Hello,
you can't create a sales order with reference to a purchase order. You can input customer PO nuber in the sales order Purchase Order number filed.
Prase.

How can I convert of Sales order to Purchase order automatically?

How can I convert of Sales order to Purchase order automatically?
It is a TPSO (Third party sales order) situation, I am using item category as TAS, it automatically converts Sales order to (PR)Purchase Requisition.
But can I convert Sales order to (PO)Purchase order? without any manual intervention?

Hello,
you can't create a sales order with reference to a purchase order. You can input customer PO nuber in the sales order Purchase Order number filed.
Prase.

How can I create multiple sales orders with reference to one contract?

Hello Gurus,
Can you please how can I create multiple sales orders with reference to one contract?
thanks!
Rakesh

hi
Lets consider example
In your contract for line item 1 you have entered qty 100
You careated sales order with 70 quantity, and now you want to creat another sales order for 30
For this first you need to check what is your item category in contract (VA42)
Goto VOV7
SPRO - IMG - Sales and distribution - Sales - Sales document item - Define item categories - Go to change mode
Make the completion rule = B Item is completed after full quantity has been referenced

Tables for archived sales order data

Hi,
ABAP Gurus would like to know in which tables will I be able to see data of archived sales orders (it is not VBAK)
Any help would be greatly appreciated.
Thanks in advance.
Mick

Hi,
If I am understanding correctly, your system has data archiving implemented.
If that's the case then there is no table which will store archived sales order.
For that you need to go to T.Code SARA.
Choose object name SD_VBAK.
Click on READ.
This will show a screen giving a name of program and option to execute in background or foreground.
This is how you can retrieve the info about archived Sales Order.
Hope this helps
Regards
Nishant
Message was edited by:
Nishant Rustagi

How can I limite some sales order Not upload to ECC

Hi expert,
I dont want some tpes sales order upload from CRM to ECC, but I want it to BW.
In my member, there is one note to get it, which mentioned to do some change in the tcode SMOEAC. Any body can give me the notes ID or tell me how to ..?
BRs
Liu Bo

Hi.
I really don't know if is there any newer note, but as far as I know no big chances occured on this transaction SMOEAC for your propose.
What I remember you have to do to change the type of replication object, is to delete everything that exists based on it. So first you have to delete the subscription, then you have to delete de publication, and only then you are able to delete and recreate the replication object type.
I remember that the system verifies if it exists any subscription not only on the client you are working but also on any other clients of your server, so you have to delete the subscription in all clients. There is sap note that describes how to verify it: 650569.
Regards.

How can i enter multiple sales order numbers to set up table

Hi,
I need to reload about 8,000 sales orders to the set up table and the SO numbers are very scattered, so i can not enter them as a range. In transaction OLI7BW Sales Document field has no multiple selection option, therefore i have to enter the documents ONE BY ONE! Could you please tell me if there any faster way to enter them?
regards,
Tansu Aksu @ CHEP

Try this link..
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Regards.
PS: if it help you, pls assign points.

How can we reject a Sales order after first Down payment invoice for Italy?

Hello,
As a legal requirement in Italy the Down paymenty have to be transformed into real invoices, another legal requirement is that an invoice cannot be cancelled it has to reversed by a credit memo.
I would like to know in this context how we can reject a sales order line once a Down payment invoice has been emitted.
When I do enter a reason for rejection in the sales order line I receive the message : V1036: Subsequent documenst exist for item XXX and then V2432 Cancellation not possible. Down payment request already created.
I can create a down payment credit memo in order to cancel the down payment invoice but how can I get rid of my SD requirement in MD04 if I cannot reject the sales order line?

Hello,
have you tried using a recjection code which is not relevant for billing?
Regards,
Uli

How can a drop ship sale order make a modifier to the intercompany transaction

if i want to make a internal modifier for a dropship sale order ,who can i do it

I am sorry, my mistake. I am pretty new at Labview. I am generating an output signal with labview to a PCB and I am trying to read back its response. The response "outputs" would then be considered inputs from the perspective of Labview. I look at it from the PCB point of view, which has inputs and outputs, and so you can probably see where I was mixed up. I use a sequence to generate the outputs going to the PCB. I want to make sure that the correct pattern of responses is given. In this case, I have Relay A and B. When I activate Input 1, I should then get the activation of Relay A N.O. and Relay B N.C., a pause, and then visa versa. When I activate Input 2, I should receive Relay A N.C. and Relay B N.O., and then again, after a pause, visa versa. Input 3 is only to see Relay A N.O. and Relay B N.C. activated, while Input 4 should see Relay A N.C. and Relay B N.O. activated. I need to somehow "watch" the order of the relay logic activations and make sure they are in order. I am able to access the state of each N.O. and N.C. contact. I attached a sample .vi with other garbage in it that you can ignore. (The programming is done on a laptop with Labview and not the computer that I am using at the moment, and so it is not as easy for me to remove code.) The top of the block diagram shows the sequence that I use to trigger my DAQPAD, which is attached to my PCB.
I greatly appreciate your help in this matter,
-Zack

How can you create a SAles order and send to customer by using IDOC

how to acknowledge the customer after a sales order is created?

Just to add to Pauls reply, along with output determination settings, When you would create the partner profile outbound parameters, use the Message type ORDRSP for order acknowledgement.
regards,
Advait

How to find cancel of sales order data?

hii friends,
now i am creating a sales register so i have need to calculate the value of cancel of sales order and return of sales material. sp plz give me table name and bill type for sales return and cancel.

Table for Sales Return is ORDN for header and RDNX for lines. As for canceled Sales Order, there are no special table but the same ORDR with field value for CANCELED as 'Y'.
Thanks,
Gordon

FM to get the sales order data using GI as input

Hi Friends,
I am looking for a way to read the sales order data (document no. )using the Goods issue document no as my input.
basically reading the Docflow in the opposite direction i.e GI -> SO .
If you can suggest a FM which can do so it would be really helpful.
Thanks,
Poonam.

Hi Poonam,
Not FM but I can tell you the Std. way.
Go to SE16 --> Table VBFA --> Enter your goods movement document list in field "Follow-on doc." --> In the feild "Prec.doc.categ." --> choose "C Order" --> Execute
Hope it helps,
Regards,
MT

Using of sales orders data in CRM in Trdade promotion managemnet?

hai
can we use the sales orders data in CRM for the cubes Trade promotions management in BW-BPS for calucating the uplift volume?
can any body tel me how this uplift volume calculates.

Hi Kallis ,
Refer this
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fbiw%2fs-u%2ftrafficLightsforTradePromotion.pdf
or just search for Traffic lights for Trade Promotion on home page of SDN with options as all to get the PDF version.
Assign points if it helps
Cheers
Raja

How to transfer Sales order data from R/3 to APO!!

Hi Techies,
I am in the process of moving some sales order data for a particular mat/loc combination in cfm1 after creating a integration model iam even activating even in R/3 but after doing this iam not able to view those sales orders in RRP3 t-code IN APO side.
Kindly let me know what is the procedure to transfer transactional data from R/3 to APO and to do enhancement in CIF which carries Transactional data .
Problem solving answers would be rewarded duly !!.
+PKP.

Hi PKP,
The field SPEC_STOCK has the description "Key for Special Stock Section" and is linked to schedule line of the PO. This seems to be something linked to special stock, but I am not very sure about the relevance of this field.
I do not see any related field when I check the order in RRP3 or in RRP2. In standard SAP, you would only be able to use the fields that are already visible in APO. Otherwise you need to add the field to the standard SAP t-code display (read the value from SOMEWHERE and then display it in RRP3. This is possible using Badi /SAPAPO/RRP_IO_COL). Then only you can see the values which you have populated.
If this field SPEC_STOCK already has some functionality (which it should have, though I am not sure what it is), you might not be able to use it for other purposes (since system does some validations for certain fields).
You are updating the value for this field in IT_OUTPUT internal table, you also need to add an X in the corresponding field in the internal table IT_OUTPUTX.
You could try putting this X, so that your changes are considered in CIF, but I am not sure what the impact may be, and you could get a dump also possibly. Even otherwise, since this field doesn't seem to be visible against a PO in APO, I am not sure if this would be helpful for you.
As far as I could see, I did not find any standard field which could be helpful for you.
May be if you open a fresh thread and ask for advice on how to send any custom comments for PO to APO, someone could provide some inputs.
Thanks - Pawan

How can we read archived sales order data?

Similar Messages

Maybe you are looking for