How can we relate c and x types in ABAP

hi all,
I would like to know how we could relate c type and x type in ABAP.
In terms of size specification.
Thank you all
prasad.

Hi Prasad,
Consider the following code snippet -
data : char type c,
hexa type x.
Now, both these variables are of 1 byte each. However, they store different kinds of data, so we have -
hexa = '41'.
write : hexa to char.
write: char , hexa.
hexa is going to store the hexadecimal number 41. (the decimal equivalent is 65). The first write statement does the automatic type conversion. so we get the 65th ASCII character in the character variable (which is the capital A).
Hope that helps.
Regards,
Anand MAndalika.

Similar Messages

Question when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

Question
when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

See this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

Question
When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

See this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

I am about to replace my hard drive. How can I reinstall forefox and still keep all my bookmarks and other related information.

Question
I am about to replace my hard drive. How can I reinstall firefox and still keep all my bookmarks and other related information

Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
* here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
* here explain how to restore it
https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

HOW can I FIX Mavericks and Safari 7.0 to allow Gmail to work? Gmail has been FUBAR'd since downloading Mavericks today. Finally found the brute-force logout site to just getr logged out; can't keep doing that. Other features no longer work, either.

Made big mistake of downloading Mavericks today.
Been struggling with all the FUBARd messes it caused, ALL DAY.
Google basic buttons don't work--can't log out or other basic functions.
Website use is impaired.
It took almost 3 hours to do a basic online order on one of them--at this rate, I'll be out of business soon, and it's seriously impairing Christmas preparations!
Google Voice/Video are screwed up, had to RE-download their voice/video plugin all over again--again.
Voice/video quality is REALLY poor.
Lag times in so many things are bad.
Thought this would download WITH the better writing/bookkeeping programs--NOT!
Mac Maps is piddle compaired with GoogleMaps.
The Email program on the desktop is REALLY hard to use, has few useful functions. It's MAYbe good if one only has ONE email; using it with severeal various email accounts is a serious liability in many ways--like filing, sorting, marking, etc.; no clear way to move email files to an external drive to save, to unload the HD.
HOW can Safari and Mavericks be fixed?
IF not, HOW can I REMOVE Mavericks and get back to Mountain Lion--which was not too great, but certainly more functional than Mavericks!
I NEED my web-based emails to work--NOW...NOT when Mac finally gets around to fixing things sometime later.
I NEED online ordering to work--NOW--not later when Mac finally gets around to fixing things.
PLEASE someone--any help out there? I couldn't even find but a rare hint that Safari 7.0 even exists--much less that anyone admits it's got problems, nor fixes for it.
What to do? Throw the whole unit out? Wipe and reboot? Dumb it back to OS 10? HOW? WHAT?
[freaking out here...]

Zak Adelman, LexSchellings,
It's a shiney new computer. Came loaded with Mountain Lion.
Too busy learning to use the blessed thing, to download anything....except...
The only pluggin that had to be loaded, was Google Voice-Video pluggin, while Lion was still it's OS. [AND been using the Safari that came already in it.]   Had to do that a couple times--nothing new there--that plug-in had to be re-loaded when using a PC, too--THAT happened even before Google slammed everyone into coerced use of it's Google+.
    [I understood from others, that Firefox won't work in Mac units--or I woulda put that in it to see if that solved anything]
This unit seemed a bit sluggish from the git-go, out-of-the-box.
I figured that was probly the local DSL here---rural DSL is...um...our DSL's not something to brag about, but it's the best we can do...
The difference between speed of loading pages, etc. on the new Mac, was --not-- toooo terribly different--though yes, slower on Mac....and chalked it up to my inexperience with Mac.
Been trying to get things up and running for a bit over a month now.
NOT doing very well at it--just barely getting by; rapidly falling behind what needs done [work].
Google worked just --OK-- when OS was Lion, as did the Google voice/video--slower, and voice-video was kinda scratchy or glitchy, but worked enough to --get by--.
Loading Mavericks, ruined that.
VOIP calls via Google talk have bad echio, static, cut-outs; video calling was pixilated or not working; WAS cued to re-load it's Voice-Video plug-in....which seemed to help a bit, though not very well; it only helped the Voice-Video some, not all--figured that was probably Google issues, less than Mac's, since Google has been increasingly dysfunctional as they have twisted it to be a social media-dominant thing.
[[now seeking an email venue that does what Gmail was good at, including the Voice-video calling, that has no intention of turning itself inside out to be "social"]]
Can't sign out of Gmail or Google+, nor use buttons in upper right corner with the drop-down menu.
NO buttons in upper right corner cluster on Gmail work, except the name+ button to toggle over to Google+---which I don't need! [yeah--THAT's a Google problem!]
Can only switch to HTML version by catching that button as the account signs in--if one fails to be fast enough with their fingers, it goes to Google+; can't get to email unless type in mail.google.com.
Managed to catch that button today, and clicked to use HTML "permanently" until these issues get solved.
ALSO:
Have fairly new [about 1 year?] HP bluetooth printer-scanner.
BUT, after Mavericks loaded: it HAS the unit listed, HAS drivers for it, HP unit IS listed as default printer, everything --seems-- "go",
.....except Mac keeps posting it's out of ink, and/or, not hooked up, and/or not turned on--even when it is on.
It's SUPPOSED to be blue-toothing that printer/scanner.
It did it for Lion, before loading Mavericks, even though it was troublesome to get it to work, it at least HAD printed one document when Lion was the OS.
Thank you...Downloaded EtreCheck:
BTW: Trying to copy/paste data from that check list, to this post, was achaic:
had to use Edit, select all, then use edit again to get it pasted--the mouse buttons weren't allowed to copy-paste using right-click functions [is this a relic limited-function "thing" with Mac?, or is it because I wanted to keep using this new wirless, non-Mac mouse?].
Advice?
See below...
Hardware Information:          Mac mini (Late 2012)           Mac mini - model: Macmini6,1
              1 2.5 GHz Intel Core i5 CPU: 2 cores;           8 GB RAM
Additional:
   Monitor used = Visio flat screen. [not Mac]
   Keyboard = Logitech solar wireless [not Mac]
   Mouse = Logitech wireless
Video Information:           Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 19:33:25
Disk Information:
          APPLE HDD ST500LM012 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (456.94 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          MediaTek Inc MT1806
          Logitech Logitech USB Headset
          Logitech USB Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.google.keystone.daemon.plist
Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] com.hp.devicemonitor.plist
          [loaded] com.hp.messagecenter.launcher.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          SpeechSynthesisServer
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins::
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          o1dbrowserplugin: Version: 4.9.1.16010
      ====== npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 ===[this was in red]=====
          googletalkbrowserplugin: Version: 4.9.1.16010
Bad Fonts:
          None
Old applications:
          HP Device Monitor:          Version: 2.7.0 - SDK 10.5
                    /Library/Printers/hp/hpio/HP Device Monitor.app
Time Machine:
===      Time Machine not configured! ===[this was in red]===
Top Processes by CPU:
               6%          WindowServer
               4%          Safari
               4%          SafariDAVClient
               2%          EtreCheck
               0%          com.apple.iCloudHelper
Top Processes by Memory:
          303 MB          Mail
          270 MB          Safari    ======[this is version 7.0 ]======
          262 MB          mds_stores
          147 MB          softwareupdated
          147 MB          com.apple.IconServicesAgent
Virtual Memory Statistics:
          1.77 GB          Free RAM
          2.85 GB          Active RAM
          2.36 GB          Inactive RAM
          1017 MB          Wired RAM
          4.64 GB          Page-ins
          111 MB          Page-outs

How can i change a pdf file type to another file type

how can i change a pdf file type to another file type

You can copy the contents and paste it into a Word file. Just don't expect everything to transfer or to retain all of the formatting.

How can I get rid of a type generated by the Data/Services return type wizard?

Hi All,
I have a JSON service that returns an object called "error". The Data/Services "Configure Return Type" wizard automatically turned this into a class "Error".
However, this caused over a hundred errors to show up inside the generated classes, "Call to a possibly undefined method Error." That's because of lines like this:
throw new Error(propertyName + " is not a data property of entity Agreements");
It's trying to throw a regular "Error" object, but now that there's an "Error" class in the same package, that is taking precedence--and that Error object doesn't have a constructor with a single parameter. At least, that's what I think is going on.
I tried to fix it by deleting _ErrorEntityMetadata.as, _Super_Error.as, and Error.as from the valueObjects package. I then opened the FML file and deleted the definition for the entity "Error" and every reference to the Error entity (class) in my FML file.
I then changed my JSON service so that it returns an object called "serviceError" instead of just "error".
But, whenever I re-run the "Configure Return Type" wizard, it regenerates the Error class, even though I've deleted it from everywhere I can find it. That breaks my project completely! How can I end this and get Flash Builder to *stop* generating this type!
In the "Configure Return Type" wizard I very carefully inspected the type of every bit of data coming back to make sure none of them show up as type "Error." And they don't (as expected, since I changed the object's name to serviceError--now the type of that object is ServiceError.
-Josh

I think you are facing this known issue https://bugs.adobe.com/jira/browse/FB-29770
Please vote it.
Thanks for the link--I just voted for it.
To avoid this, in the last page of "Configure Return Type", edit return type name to something else (You can also edit subnodes's name too in the wizard).
Actually, that's exactly what I saw doing; I apologize if that wasn't clear in my post.
I closed and restarted Flash Builder, and once I did that Flash Builder stopped generating the Error class. My guess is that the FML file, even though I had updated it (by deleting all references to the Error class), was cached in some fashion by Flash Builder, and restarting Flash Builder forced it to reread the FML file?
Additional point of clarification: my understanding is that the FML file stores all the metadata about the services that Flash Builder has been able to figure out so far, and when you run the Configure Return Type wizard, it will regenerate *every* type in the FML file, even if that type is not mentioned anywhere in the particular return value that you are working with.
Edited to provide additional thoughts on FML file.

All my PDF forms are automatically transformed in Word forms,how can I change that and only choose the PDF I want to transform

All my PDF forms are automatically transformed in word forms,how can I change that and only decide which PDF to be transformed in word

Hi Ulfsch,
Thank you for posting on the Adobe Forums, kindly try the step mentioned below.
1) Right click on any of the PDF file and choose the option open with
2) Select choose default program
3) Select Adobe Reader/Acrobat from the list
5) Check the box "always open this type of file with selected program" (not the exact same wording)
6) Click OK
If you are on Mac, CTRL+Click on the file.
Go to Get info
Go to Open with
Change it to Adobe Reader/Acrobat and click change all.
Thanks,
Vikrantt Singh

When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?

When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?

Hi screen name,
Adobe PDF printer gets installed when you install Acrobat 10 Pro.
To use this printer you need to purchase Acrobat. Once the trial period is over you cannot use the printer to create pdf files.
An alternative way for you is to utilize Microsoft's own inbuilt pdf engine.
You can simply open the file and select 'Save as' and in the type list select 'pdf'
Please refer : http://office.microsoft.com/en-in/excel-help/save-as-pdf-HA010354239.aspx
Regards,
Rave

How can i use Catalog in Method Type?

Dear Experts,
How can i use Catalog in Method Type?
I want to use Multiple method type mean require selection option(help from catalog)and also need to entere the result against certain parameters. So how can i do this possible ?
Except use of additional infrmation field
Regards,
Abhishek

Hi,
Can i provide selection option F4 help at Method while enteing the result?
Because for 1 MIC as per buyer method testing different so it will come alternately.
i.e i have 3 methods which comes altarnative for one MIC
TST_ISO
TST_AATC
TST_ASTM
So how it is possible???

How can I separate Left and right audio channels in labview 8.5 tia sal22

How can I separate Left and right audio channels in labview
8.5 tia sal22
Greetings All
I have a working Labview vi that converts a math formula to an
audio signal. I would like to have the
right and left audio channels playing different math audio signals is this
possible?
Example
Right channel -> plays the audio signal created by a math
formula
Left channel -> plays the audio signal created by another
math formula with adjustable phase control
I’ve included a VI with a working audio and math formula but
I’m not sure how to separate the left and right channels.
I’m using labview 8.5
I looked up a similar question on the
support board and it said” use an instance of the the Sound Output Write that
has a 1D waveform data type input (i.e. Sound Output Write (DBL)). Each
element in the array would correspond to a channel.”
But I’m not exactly sure what he meant. I’m using a formula to generate the wave file
Tia sal22
Attachments:
fixed mathscript formula to sound test.vi ‏680 KB

Sorry it took so long to get back. Here's the new VI with it splitting out the left and right channels.
I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops. I increase the buffers
but I still get the clicks and pops. I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in. Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
I'm using labview 8.5
And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
tia sal22
Attachments:
lvt_audio_realtime-out left right device ID test.vi ‏68 KB

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips?

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips? Also when I use my blade it only leaves a dotted line in the clip. How can I make that a solid line? I do a lot of flickering in my videos and don't need that some what of a snapping effect while I edit. Please help me someone. I believe i upgraded from FCP 10.0.1 to 10.0.3 and before it never did this.

Mark an In point and an Out point (which creates a Range) and hit the forward delete key (Replace with Gap.) On a MacBook, you'll probably need to hold down the Fn key and type the Delete key (or, I think you might be able to use Shift-Delete as the same command). On an iMac/Mac Pro keyboard, it's the key just to the left of 'end' or the next key above the left arrow key.
You can use the Range tool (hold down the R key and click drag over your clip) or the Blade tool to cut at the in and out (then select the cut and replace with gap).
You can also go into Commands > Customize (command-option-K) and assign a different key to Replace with Gap.
If you need to ripple edit the ends (cut), create a small section that is Gap, and hold down the T key while you use the mouse to click drag both ends (double sided trim cursor) of the cut.
Don't worry about the dotted line blade... That just lets you know that the frames on either side of the cut are continuous, or sequential — nothing has been moved yet. Once frames from either side of the mark have been cut, it becomes a full fledged cut resembling a separate clip.

ST03 Export: How to export all instances and task types?

I am exporting ST03 data using SAP GUI
I can export data for a single task type and a single instance.Is there a way I can export the Time Profile data for all instances and all task types in a single export? Can I do a single export rather than NxM exports?
Also, when I export to a text file, there is a header that reports the instance, data, and task type. When I export to excel file I only get the table, not the header info. Is there a way to to get the header info into the excel export?
Is this the appropriate forum for these questions?
Any help is appreciated.
Thanks.
Tim

I moved this question to an ABAP forum. Here's the [thread|ST03 Export: How to export all instances and task types?;.
Tim

How can i relate the input parameters to table MARD

Hi,
I have inputs as material number , sales organization , distribution chanel and plant , using this i have query the table MARD . in MARD table material number and plant is available , how can i relate sales organization and distribution chanel to query the table, please help.
Regards,
Ratheesh

Hi,
Try tabel MVKE, that contains sales data, table MARD is SLoc specific data for material.
http://www.erpgenie.com/abap/tables_mm.htm
Regards,
Csaba

In Function 'MD_STOCK_REQUIREMENTS_LIST_API', how can i relate the order?

In Function 'MD_STOCK_REQUIREMENTS_LIST_API'
we will get the material requirment order No. and their sub soure order No.
Fox example
if i find a PR, then i will also see 2 PRs as it's sub source.
But how can i relate the orders from function 'MD_STOCK_REQUIREMENTS_LIST_API'?
TKS a million~~

Hi,
Can you please explain your need with a clear example, from your initial posting it is not quite clear what you're trying to link.
Regards,
Vivek

How can we relate c and x types in ABAP

Similar Messages

Maybe you are looking for