How can we transform opacity mask of an art?

Hello All,
I have created one triangle and created one opacity mask for that traingle. Look into the opacityMask.jpg file
Now I have used AITransfromSuite::Transfrom( ) function to transfrom the traingle art. Traingle is transformed to a new location but the opacity mask is not transfromed? Look into the transfromedTriangle.jpg file.
So, could you please tell me how can we transfrom opacity mask so that both inputTriangle and transformedTriangle are same??

Hi,
I'm not sure having totally understood your request.
Do you want to apply a translation matrix to an art or to its opacity mask?
Do you want to make a copy of an existing art and translate this copy?
Anyway, even if you make a copy of an existing art and translate it, the copy should have the same aspect!
Then, you have the stuff to complete your task:
reply for a question you posted days ago:
http://forums.adobe.com/message/2410622#2410622
should be ok.
Best regards,
Thomas.

Similar Messages

How can we transform a video from progressive to interlaced with final cut?

How can we transform a video from progressive (720x1080 50p) to interlaced (PAL) with final cut pro???????
The video is taken with Sony EX3

Hi Nick
Sorry but your first link says +"The file you are trying to access is temporarily unavailable."+ ... but tell me, are you viewing these interlaced encodes yourself on an interlaced monitor (eg are you burning them to disc and viewing on a TV) as they are meant to be seen, or are you just playing them back from file on your (progressive) computer display?
By the way, I did manage to download your source file and encoded it here. Looks ok to me ... in a addition to the instruction above, I also changed the Field Dominance in the Encoder > Video Format tab to Top First (it defaulted to progressive due to the progressive source file).
Let me know if that helps
Andy

How can i create a mask of grays?

Hi
i did learn how create a saturation mask (a mask that contains the colors)
how can i create a mask with the grays ?
can i do it? how can i create it ?
the only way i can thing it's use a color selective adjustament layer and set to +100 black every sliders outside grays
but i don't think it's a mask with all the Grays
thanks

If you start out with, say, this image in Lab:
Then duplicate the layer and set Blend If, in both the a and b channels, to 123 - 133. That layer will then look like this:
You see you have all the neutrals from black to white, but not the saturated colors. You can load transparency here as a selection the normal way - ctrl+alt+2, or ctrl-click the L channel. Save the selection and you have your mask.
How much fuzziness you want in the neutrals is determined by where you set the Blend If sliders. You can also split the sliders with the alt key for a softer transition. Here it includes 5 values either side of strict neutral.

How can i transform MFC HWND into jpanel or jframe instance

Hi!
I want to open a MFC window, then with the HWND , i want to open java subwindow created inside the MFC window with the HWND, i wonder if there is a way. how can i transform the HWND into jpanel or jframe instance.

Look at the article in CodeProject and read the example in it. The other questions you can send to my email because I cannot give you concrete response in this forum.

How can I transform XML-DB to Relational DB?

How can I transform XML-DB to Relational DB?
I want to transform Oracle 9i XML-DB to Oracle 8i R-db
please tell me how to do this .
thank you

hi
good
its idoc_xml or idoc_xml_transform
go through the below link hope it ll help you to solve your problem
Check with below link :
Re: IDOCS_OUTPUT_IN_XML_FORMAT -- IDOCS_OUTPUT_TO_FILE
Re: any function module to write-xml schema of a idoctype to an internal table
/people/michal.krawczyk2/blog/2005/11/13/xi-how-to-check-your-idocs-on-a-web-page-from-sapgui -> this will help you
thanks
mrutyun^

How can I control the mask point?

Hi everyone.
How can I control point in the circle by using the Expression???
Is it possible?

There's no direct and easy way to control individual mask path vertices with expressions, but it is possible.
Christopher Green has a script (Connect_Vertex_To_Point.jsx) on his website that attaches a vertex to a control point. You can use that script to figure out how to do something similar.
I'll try to put something more direct together myself.

How can i use eyedropper between two different art board.

Hi
How can i apply the same color for the images in two different art boards with eyedropper.
I am trying to apply the same color from the image in one art board to another image in another art board.
Can any one help me please. Thanks
Steve
I am using Mac

apresslink,
Presuming you are unable to use the Eyedropper Tool normally, in other words keep the target object selected while you pick up the colour, by having the Artboards open in adjacent windows to ClickDrag between (I am still with 10 which may explain at least part of my ignorance for which I apologize):
Until someone presents a smarter solution, you may cheat and create a carrier object beside the source object, drop the colour in that, cut and paste it to be beside the target object, and drop the colour there. With multiple colours to drop multiple times, you may create a palette to hold them, to use just like a painter working on several canvases at the same time. Or you could paste diminshed copies of the source objects.

How can I make OPAC in Oracle Forms Builder

Hello everyone,
I'm developing a Library Management System as my project in my Oracle subject.
Can anyone tell me how to make OPAC module of Library management system in Oracle forms builder.
I don't have any idea because this is my first encounter in this system.
Thanks.
I really appreciate all your help.
God bless ^^

Hi,
Simple, using current values you can create new id , 'old' and name so oracle will create record, now refresh block, next using next_record in loop you can find record,erase one and refresh block.
Adinath Kamode

How can I transform an image into a different design?

I've used the Distort effects in AE to modify the following video:
Into this:
I'm a pretty pleased with the results. I simply used the Transform and Mirror effects.
However, I have a bunch of other designs which I can't distort into a good alternative design by using the same method. Here is an example:
I am hoping some of you very clever people can come up with a method I can use for transforming this sort of design into something decent!
Thanks!

Thanks for the replies!
I realise this is a broad question. I will elaborate on the images from my first post in order to provide more details:
1) I have generated a number of animated designs, the blue image when animated looks like moving electricity. All of the designs are geometric patterns of one form or another. I have around 50 of these designs.
2) I want to create variations on these geometric animations. Rather than start from scratch and create a brand new design (which is a lengthy process), I want to use the effects in After Effects to create variations. In the example I provided, I took the blue design and used a number of effects to create the green design.
3) Essentially, I now have two different animations. The blue original, and the green variation.
4) Here is my question. Are there any specific effects within After Effects, that allow me to distort an image/animation to such a degree that it essentially looks like a different image/animation? So far, I have used Transform and Mirror.
I gave Kaleidoscope a try, and that gave some good results, so thanks for that suggestion.
5) The problem I am having is that some of my other designs are more or less 'symmetrical' in appearance - like the yellow image from my first post. The Transform, Mirror and Kaleidoscope effects do not really distort the symmetrical animations enough. This is because they simply tend to either rotate the image (which is a circle, so rotating it does little), or they mirror the design (which again does little as the image is a circle). So, are there any other effects I can choose which will distort a symmetrical geometrical design, whilst still retaining a degree of geometric appearance?
I thank you again for your time, it really is appreciated!
EDIT: As Todd Kopriva suggested, here is the link to the other forum post: http://forums.creativecow.net/readpost/2/1008997 - I forgot to link back to this forum from there. I will add that shortly.

How can I transform xml to idoc with idoc_xml?

Hi,
I have to send shipping orders and receive shipping confirmations via the idoc_xml webservice. At this time I am able to send the shipping orders to a destination. Now I am trying to send xml data back to the idoc_xml service who should transform this xml (SHPCON) to an idoc and "books" this shipping confirmation automatically. But how should the xml look like to get this work?

hi
good
its idoc_xml or idoc_xml_transform
go through the below link hope it ll help you to solve your problem
Check with below link :
Re: IDOCS_OUTPUT_IN_XML_FORMAT -- IDOCS_OUTPUT_TO_FILE
Re: any function module to write-xml schema of a idoctype to an internal table
/people/michal.krawczyk2/blog/2005/11/13/xi-how-to-check-your-idocs-on-a-web-page-from-sapgui -> this will help you
thanks
mrutyun^

How can I transform a 3D world coordinate to a 2D device coordinate?

I have been working with Java 3D for a few months and I can create a scene graph and display it. Now, I want to transform a 3D world coordinate to a 2D device coordinate. I don't want to draw the 3D point in the scene, I just want to know what the 2D coordinates would be. Does anyone know what sequence of transformations must be made to do this?

Thank you for your reply. I used your code and it solved most of my problems. However, I can't get it to apply a perspective projection to the point in question.
I took the following line of code from your response above.
view.getCanvas(0).getPixelLocationFromImagePlate(somePointInNode, awtPoint);From your code, and the javadoc that I've read, it appears that it should perform a perspective projection, but in my case it doesn't.
I have included output from my program below. I wrote a program that displays the x, y, and z axes on a Canvas3D. The viewpoint is looking down the z-axis with the positive x-axis pointing to the right and the positive y-axis pointing up. I then used your code to compute 2D points at the origin and along each of the three axes (calls 1-4 in my output). On the Canvas3D, the origin and the point along the positive z-axis are at two distinct locations, as one would expect of a perspective projection. However, when I compute the 2D location using your code, the 2D points are identical, as one would expect of a parallel projection. My view's projection policy is PERSPECTIVE_PROJECTION, but as my output below shows, the transformation from somePointInNode to awtPoint in calls 1 and 4 appears to be created as if it is a parallel projection. It is as if the z component is ignored. Why? Am I doing something wrong?
My output:
projection policy = perspective projection
call 1:
somePointInNode
origin: x=0.12699998915195465 y=0.15931445360183716 z=0.0
awtPoint
x=445.999961562044 y=435.4999675525455
call 2:
somePointInNode
x-axis: x=0.2528710961341858 y=0.15931445360183716 z=0.0
awtPoint
x=891.9999469321543 y=435.4999675525455
call 3:
somePointInNode
y-axis: x=0.12699998915195465 y=0.2851855605840683 z=0.0
awtPoint
x=445.999961562044 y=-10.500017817564867
call 4:
somePointInNode
z-axis: x=0.12699998915195465 y=0.15931445360183716 z=0.12587110698223114
awtPoint
x=445.999961562044 y=435.4999675525455

How can i change net mask while using dhcp??

Hi guys! Newbie here. I am having a problem that i can't find an answer to. I am in a college network with dhcp. in this network we have many workgroups. I can see all of them. But i can only explore 2 of the 17 workgroups. I am guessing it is the subnet mask but i am not sure.
here is the relevant part of rc.conf
HOSTNAME="innerwisp"
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
ROUTES=(!gateway)
#NET_PROFILES=(template)
and here is smb.conf
[global]
workgroup=b2
security = user
dns proxy = no
restrict anonymous = no
domain master = no
preferred master = no
max protocol = NT
acl compatibility = winnt
ldap ssl = No
server signing = Auto
workgroup = b2
and the weird thing is that b2 is not one of the workgroups that i can explore
And one more question. I tried to set up the network from control centre-->Internet&Network-->network settings. there i get the message: your platform is not supported. plz chose one of the following distro's. which should i choose?
I would really appreciate any help cause for the past 4 hours i have been trying and searching with no result.
I am sorry if something like this has already been posted, but if it has i must have missed it
Last edited by innerwisp (2008-03-17 23:01:36)

Well I guess u can say problem solved. the problem must have been with the DNS cause smb://192.168.0.xxx works. I only need to explore the three main servers so I dont need to figure out what the problem with the dns is. Thank u for your help guys!

How can i transform a file stream into a stream of a block blob to download block blobs?

I want to change this code to work with block blobs, but I can't seem to figure it out on my own
// initialize the http content-disposition header to
// indicate a file attachment with the default filename
System.String disHeader = "Attachment; Filename=\"" + "sample.txt" +
Response.AppendHeader("Content-Disposition", disHeader);
// Download the blob to a file stream.
using (FileStream fs = new FileStream(this.Server.MapPath(@"Data\data.txt"), FileMode.Open))
int chunkSize = 4096;
byte[] buffer = new byte[chunkSize];
int read = 0;
Response.AddHeader("Content-Length", fs.Length.ToString());
do
read = fs.Read(buffer, 0, chunkSize);
Response.OutputStream.Write(buffer, 0, read);
} while (read > 0);
fs.Close();
fs.Dispose();
Response.End();

Hi,
What detailed scenario do you want to achieve? If you want to download files from block blob stream, please have a look at below article.
#http://azure.microsoft.com/en-us/documentation/articles/storage-dotnet-how-to-use-blobs/
If I misunderstand, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I transform..

Hi,
I want to transform the XML resultset I get from querying the oracle database in a format
which can be easily loaded in to ADO Recordset. Is there any easy thing available
to do this transformation ? Any component or XSL ?

Can you please let me know the first few important steps I need to follow to get "ADO recordset compatible" XML, from the XML I get from Querying the database ? Please point me at specific classes, methods and XSL files available.
Thanks and Regards,
Kiran

How Can I Change Format Mask For All Fields that type's Number Depend on Parameter in Report Builder 10g ?

I want Change format mask for all fields that type's number
Such as
if :parameter_value = 1 then
all fields format mask = ' 999,999,990.000' ;
else
all fields format mask = ' 999,999,990.00' ;
end if;
Regards

So, i have bad news for you : you'll have to rebuild again.
Meanwhile i have excellent news for you : there's an online tool made by Johannes Henseler called Sidecar xml which builds the necessary xml file for you, sort of what you find in the Digital Publishing Folio Editor website, but saves it in your Folio folder.
Next time you import all your folder (with that file), it will place all the necessary information, and even reorder the articles.
Build once, play many times.

How can we transform opacity mask of an art?

Similar Messages

Maybe you are looking for