How can you avoid the empty line?

hi all,
i looked around quite a bit and didn't found an answer to this very common problem.
i used this blog:
Solution to the problem encountered using Variable Substitution with XI-SP12
for using a dynamic filename.
the problem i get is the file adapter create a empty line instead of the FILENODE which i need to be suppressed and not written to the file.
is it possible?
regards,
roi grosfeld

Hi,
Well thats good question. you can't test it in test tab of mapping.
It will give you exception like something below
RuntimeException in Message-Mapping transformation: Runtime exception
Here you can create the file name in Mapping either by using various APIs as well as Sender side filed values and can pass to the UDF that you will create for dynamic filename.
File with same name will be created. This is specific to DynamicConfiguration class which deals with the values at runtime.
Thanks
Swarup

Similar Messages

Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

hi friends
using `n how can i add two empty line (two carriage return), between these two lines in the output file?
PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
PS C:\> $Env:USERDOMAIN | add-content c:\file.txt
i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt but it results in
myPCMyDomain
but i wanted the contents of the output file be like this:
MyPC
#empty line here
#empty line here
MyDomain
i tested many other forms but didn't work.
thanks

I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
You are using a Unicode file. Locale is what?
If you just want notepad compatible line breaks then do this:
del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
Look in hex to see that `n is ^L or 0xA and is only one character. CrLf is 0xD 0xA - two characters.
My programmers editors and VS all understand a single ^L as a line break so does PowerShell. Only DOS/Notepad and other utilitis don't understand this..
¯\_(ツ)_/¯

How can I avoid the Local storage pop-up question dialog box during playing you tube vedios ?

How can I avoid the Local storage pop-up question dialog box during playing you tube vedios ?

You might try tweaking your global privacy settings. I suspect it's set to "always ask."
Go to this page -- http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l -- which contains the settings panel for Flash Player, and click on the various "deny" buttons to disable this. (It's a good idea to click on all the tabs to check the settings.)
If this works for you, please post back. (I know it worked for me.)
Ortho_Fan
(not a techie)

How can I avoid the need to OFTEN refresh or recover HP 2000 notebook?

How can I avoid the need to OFTEN refresh or recover HP 2000 notebook? Windows 8.0.

I found your support page by searching E0M18UA#ABA (as opposed to EOM18UA#ABA) which I assume was a simple typo. To answer your original question, the answer is to identify and isolate the cause of the errors and issues you are experiencing. Once you identify each issue, you can find what it takes to get beyond them without having to refresh or recover so frequently.
You can only troubleshoot and identify the issues that are currently happening. If you are getting freezing right now, first take a look at this document specific to the freezing to narrow down the cause: Computer Locks Up or Freezes (Windows 8)
A link to this document is contained in the previous one, but it is worth pointing out that this might be valuable to test for hardware failures: Testing for Hardware Failures (Windows 8)
Another valuable tool when trying to identify the source of the problems, is to perform a clean boot after having one of the issues and trying to recreate it. This shows how to remove startup items. A good strategy is to disable half of the available items first, then restart and try to recreate the issue. If you cannot recreate it then perhaps there is a problematic startup item. If you can recreate it then disable half more, and repeat a few times until you empty the startup items.: How to perform a clean boot in Windows
I hope this helps, and by no means is this a recipe to fix your current issues, but a few strategies to help you better identify the issues.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How can I avoid the null values in cross tab?

How can I avoid the null values in cross tab?

Hello Anindita,
Let me explain you the problem in detail.
I have selected User and Program as rows in the cross tab. In Summarized Field I am counting the Programs.
In DB I can have both User and Program null.
Letu2019s take these scenarios...
1) For a User, Program can be null
2) For a Program, User can be null
3) And both can be null.
A null Program does not give problem since Cross tab does not count the null values and in my case too, it remove the Program which are null from the Cross tab because of the counting its doing on Program. Hence scenario 1 and 3 is not a Problem.
Problem comes in scenario 2 (For a Program, User can be null).
In this case since Program is not null it will get counted and will be grouped under null user but I donu2019t want to show the null user Grouping in my cross tab.
"Suppress empty rows" and "suppress empty colums" does not help.
Thanks & Regards,
Amrita

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

How can i remove the empty sting from IList collection?

How can i remove the empty sting from IList collection. If i use the code i got System.NotSupportedException was unhandled exception. How can i achive this?
IList record = (IList)records;
int count = record.Count;
for (int i = 0; i < count;i++)
bool contains = record[i].Equals("");
if (contains)
record.Remove(record[i]);
Is anyone know, please suggest me.
Thanks in Advance!

Try:
items.RemoveAll(s => string.IsNullOrEmpty(s));
Or you can filter them out using where:
var noEmptyStrings = items.Where(s => !string.IsNullOrEmpty(s));
Having fun with custom collections!
Basics of .NET Collections in C#
How does it work in C#? - Part 3 (C# LINQ in detail)
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

I have made a book of my I Photo pictures. In certain layouts there is a textframe. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it or should I delete the text "Write your text here" ?

I have made a book of my iPhoto pictures. In certain layouts there is a text frame. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it untouched or should I delete the instructing text "Write your text here"?

Most pages have layouts for pictures only or pictures with text boxes. Either select the same layout for that page but the one without the text box or put a space in the text box.
Putting a space in the text box will avoid getting the warning when ordering that there's an unfilled text box in the book. The box will not be visible in the final product. You can and should check the book before ordering by previewing it as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it
Happy Holidays

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

You can check the file prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and remove the line(s) related to that extension (procon.password).

How can I search the last line in an internal table?

How can I search the last line in an internal table?
With a describe?? If it is , how can I do that?
Thanks!!

Hi shilpa,
it seems to be you are NEW to SDN. welcome. if you want to get solutions to your Questions, you have to post a NEW thread.dont use the existing thread to post your question.
any way i am giving you the solution for your question
LOOP AT ITAB WHERE F1 = <SOME VALUE>
F2 = <SOME VALUE>.
ENDLOOP.
IF SY-SUBRC = 0.
ITAB WILL HAVE THE LAST RECORD which satisfying the given criteria in WHERE clause of LOOP.
write itab <--this ITAB will have the last record.
ENDIF.
regards,
Srikanth.
Message was edited by: Srikanth Kidambi

How can you change the font size in the application and system headers?

How can you change the font size in the application and system headers? I searched the system and finder prefs to no avail. Changing the screen density is not a good option.
Thanks

I downloaded Tinkertool. Found the font section and increased the size of most selections. The only thing that changed that I can see is the window label. The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4. Found the finder "show view options" but that didn't seem to change anything either. I'll keep working. Restarted all apps after changes as well.

I have a MBP 15" with iPhoto 9. When right clicking on icon in dock 3 iPhoto libraries come up; one empty, one with 35,000 photos and one with 30,000 photos. How can I delete the empty one and merge the other two without getting duplicates?

I have a MBP 15" with Iphoto 9. When I right click on icon in dock 3 iPhoto libraries come up; one empty, one with 35,000 photos and one with 30,000 photos. How can I delete the empty library and merge the other two without getting duplicates?

You can delete the empty one by dragging it to the trash ( test everything before emptying the trash)
Merging libraries requires iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - it is the only current solution to merging libraries
LN

Every time I sync my iCal computer with my iPhone 4 or iPad, duplicate entries are generated on both systems. What am I doing wrong or how can I avoid the duplications?

Every time I sync my iCal on my computer through iTunes with my iPhone 4 or iPad, duplicate entries are generated on both systems. What am I doing wrong or how can I avoid the duplications? I have been doing this for several years and this problem is a more recent issue, like in the last 6 months. I have been deleting the duplicate entries, on both systems, but some duplicates reappear through "general" entries that are connected to the correct color for a Calendar, but not the name. I am going nuts and wasting tons of hours trying to get the 3 calendars to sync without generating duplicate entries.

Choose one of the Calenders on ONE of the computers OR the MobileMe as the Master / correct account.
The REINITAILISE the data of MobileMe within preferences on the computer defining the datatransfer correctly (in the advanced box of preferences). The synchronise iphone contacts and calender directly on-line to MobileMe.
I posted a question on this today, and gave my own reply !
Regards,
Kevin

How can I avoid the display of ORA-31684 during impdp import?

Hello,
I'm working on a cross-platform tablespace migration (from SunOS to RedHat Enterprise Linux).
During the import with DataPump, I have several ORA-31684 error messages ("Object type TYPE : "OWNER"."OBJ_NAME" already exists"). Some of my TYPE objects exist already in the Linux instance of the DB. The messages appear only for 4-5 TYPE objects, while overall I have around 180 TYPE objects owned by the schema owner.
How can I avoid the display of these error messages? I don't want to drop the TYPE objects individually from the Linux instance, as the object list may vary in time.
Thank you,
Adrian

Hi,
There is no way to tell the impdp to ignore those errors. They will be printed to the error log and to the screen where the job is being run.
Dean

How can you avoid the empty line?

Similar Messages

Maybe you are looking for