How can you configure mail settings in process chains?

HI Experts,
please let me know how can you configure mail settings in process chains?

Dear Suman,
To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
To create mails to Process chains:
Right Click on the Process varient select the Create Message in the context menu.
Select the type of mail i.e for successful, Error, Anyways.
Then follow the screens.
Note: The recipient type should be Via Internet.
Hope this helps u.
Regards,
Kishore.Pulla

Similar Messages

  • How can you tag mail as junk on my iphone?

    How can you tag mail as junk on my iphone?

    If you have updated to iOS7, this is incorrect.
    To mark and file your mail as junk on iPhone, do this:
    When looking in your mailbox at the list of emails:
    1. Choose the email you wish to send to Junk (do not open it)
    2. Swipe it to the left. 
    You will see on the right 2 choices: Trash or More.
    3. Choose More
    Now you will see the choice to move it to Junk.  When you do this it will create a Junk folder for that mailbox.

  • How can I configure Cache settings ? Frequency , capacity ?

    How can I configure cache settings like capacity and frequency? System is very slow . We experience system degradation.

    # type about:config in the browser's location bar, and then press Enter.
    # If a warning displays, click I'll be careful, I promise!.

  • How can i configure mail session

    I am trying to execute the junit test cases.The server will not be running when i execute the junit test cases.Their are some methods which send the mail.The mail session is provided by the server with the help of JNDI configured in server.xml.How can we code and provide this mail session as a JNDI resource.

    I do not know if this is the right solution but in the web application XML configuration file you have to add the mail session reference.
    The file name is xxxx-oc4j-amm.xml where xxxx is the web application name.
    Inside <orion-application> entry you have to put
    <mail-session location="mail/Session" smtp-host="smtp.host.it">
    <property name="mail.transport.protocol" value="smtp"/>
    <property name="mail.smtpo.port" value="25"/>
    </mail-session>
    where smtp.host.it is the IP address or the name of the SMTP server
    I hope to be helpful
    Ciao
    Domenico Pozza

  • How can you configure Firefox to apply updates as soon as they are available?

    I have a mandate to update Firefox across every machine in my enterprise within 48 hours of a new release. I have been doing this with intranet distribution tools (SCCM, etc.) but because of the frequency of Firefox updates this has become laborious.
    I've been looking at the about:config settings in the "app.update" category (http://kb.mozillazine.org/Category:Preferences) and some of those seem promising. As a test, I set "app.update.silent" to TRUE and "app.update.interval" to 60 (seconds) on a legacy version of Firefox. I restarted the browser, let it sit for a few minutes then restarted it again expecting the latest update to apply, but nothing happened.
    How can I script or automate via Firefox's internal settings the same update process that is triggered when users manually go to Help > About?

    The Nightly versions have these values for some of the prefs because they can be updated daily more than once because of a respin
    *app.update.interval : 7200
    *app.update.promptWaitTime : 43200
    You may need to reset update timer prefs.
    *app.update.lastUpdateTime.background-update-timer
    You can have a look at the comments in the source code that handles the updating process to see if that gives some ideas.
    *http://mxr.mozilla.org/mozilla-central/source/toolkit/mozapps/update/nsUpdateService.js
    *http://mxr.mozilla.org/mozilla-release/source/toolkit/mozapps/update/nsIUpdateService.idl
    *http://mxr.mozilla.org/mozilla-release/source/toolkit/mozapps/update/nsUpdateService.js#1951

  • How can in configure mail in tomcat 4.1

    sir ,
    i want to configure tomcat 4.1 server for sending mail from my jsp pages.i got some codes for sending mail using jsp.it needed an smtp server address and default port no. i have theses too.but my problem is
    my smtp server needed user name and password.but in server.xml file has one parameter smtp host name ,how can i giove user name and password in server.xml file

    I guess we all have to go ahead and file bugs with Apple:
    https://bugreport.apple.com (for registered developers only) or
    http://www.apple.com/feedback/macosx.html (everyone)
    Andreas

  • How can I configure Mail for pop servers when it wants to make it an IMAP account?

    When starting Mail for the first time, I enter my account credentials and Mail sets it up as an IMAP account.  For the past several years, I've needed to configure the pop server settings for this account on different devices.  The IMAP configuration Mail came up with won't work.  How can

    The way of setting up Mail for different account types is to:
    Open Preferences
    Click Accounts
    Click +
    Enter username and password, then hold down the option key when clicking Continue.

  • How can you configure such system

    hi all ,
    some Supply Chain , has 1 server oralce 8 , 50 Distributors having Win98 running Personal Orale , each Distributor have many sales persons visiting retails and at the end of the day they manually enter their invoices in the Win98 Personal Oracle ,
    Personal Oralce replicates with the server every 24 hour using dial up connection ,
    they wanted to accelerate system by using Pocket PC 2002 with the sales persons ,
    how can we use oralce lite and Mobile Server in such a configuration ?
    N.B. they are not willing to change win98 machines
    regards

    1.u can see availabilty any time in ENVIRONMENT---> Availability
    2.In case of shortages system wil give a pop up for this the followoing setting has to be done:
    in SPRO>SALES AND DISTRIBUTION->BASIC FUNCTIONS> AVAILABILITY CHECK AND TOR-> AVAILABILITY CHECK->AVAILABILITY CHECK WITH ATP LOGIC OR AGAINST PLANNING-> DEFINE DEFAULT SETTINGS
    Here for ur sales area in rule put blank which wil give dialog box in case of shortages
    anil

  • HT5682 "which is no longer required to configure applet settings." Then how do you configure the settings?

    How do you now reach the Java settings for your machine for things like memory allocation?
    Also, what about 32- and 64-bit architecture? How do I control which is active?

    hello vnsonwu, this sounds like there might be a problem with the file in your profile folder that stores the settings (maybe it is set to read-only or corrupted in another form) - please go through the troubleshooting steps described here: [[How to fix preferences that won't save]]

  • How can you transfer "my settings" for track instruments from one computer to another?

    I am trying to transfer garage band recordings from laptop to desktop - the real instrument tracks have been adjusted manually and save as "my settings". How to I transfer those settings from my laptop to my desktop. The recordings show up but not with the settings.

    Your personnal software Instruments are stored in the Instruments Library in your User Library.
    For example, I have custom Choir settings stored in in a file:
         ~/Library/Application Support/GarageBand/Instrument Library/Track Settings/Software/Synth Textures/riffyrifftest.cst
    Copy the instruments in  ~/Library/Application Support/GarageBand/Instrument Library/Track Settings
    to the corresponding folders on your desktop computer and install them there,
    Regards
    Léonie
    P.S. is your profile signature current? Otherwise, if you are unsing Lion or Mt. Lion your user library may be hidden.

  • How can I insert the RSCRM_BAPI into Process chain?

    Dear all:
    Now I Use RSCRM_BAPI(RSCRM_REPORT) ,excute a query , Get the result in a table, I use this table as a datasource,and then next steps,upload data. all of this runs well.
    But  I want inset this process into a process chain. now I don't know how to do it.
    who can help me?

    Hi,
    Now I'm using RSCRM_BAPI in Process chains..
    1. I set the report name RSCRM_BAPI  and then in schedule I select EVENT there I given Event is
    'ZE_GR' and parameter is  'ZEP_GR'. and then I created a program and there I given Event and Parameter. And then I inserted this program in Process chain. And I scheduled the Process chain.
    You need to create the event in SM62
    REPORT  ZE_GR_RP.
    DATA: EVENTID LIKE TBTCJOB-EVENTID.
    DATA: EVENTPARM LIKE TBTCJOB-EVENTPARM.
    EVENTID = 'ZE_GR'.
    EVENTPARM = 'ZEP_GR'.
    CALL FUNCTION 'RSSM_EVENT_RAISE'
      EXPORTING
        I_EVENTID                    = EVENTID
        I_EVENTPARM                  = EVENTPARM
    EXCEPTIONS
      BAD_EVENTID                  = 1
      EVENTID_DOES_NOT_EXIST       = 2
      EVENTID_MISSING              = 3
      RAISE_FAILED                 = 4
      OTHERS                       = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Thanks
    Reddy
    Edited by: Surendra Reddy on Dec 2, 2008 5:09 AM

  • How can you configure an Exchange Account in Mac OS X to use a SSL client certificate?

    I'm trying to connect the Mail App of Mac OS X to my company's Exchange server. For security reasons you have provide a SSL client certificate to the server. You can convince Safari to use a client certificate by putting it into your keychain and configuring a suitable "identity preference" for the URL of the related site. But the Mail App seems not to use the keychain for this part of the SSL negotiations.
    Since you can configure the client certificate usage for an Exchange Account for the iPhone with the Configuration Utility there should be a way for the desktop App, too. Has someone sorted this issue out already or does the Mail App actually lack of client certificate support?

    I had a nice chat with the Apple end user support which revealed that this feature falls in the responsibility of the business support group. Since I have no appropriate support contract I could ask for help for about 480€ per issue -- nice try
    After more research I found the Configuration Profile Reference, where you get information about Exchange accounts too. Starting with a working iOS-Profile I changed the Exchange account part according to this documentation for OS X. All you have to do is to replace PayloadType com.apple.eas.account by com.apple.ews.account.
    After importing this profile I found the expected Exchange account within the Contacts.app. But the SSL client certificate was still not used and therefore my account not usable.
    You could enable Mail, Calendar & Reminders and Notes within the System Preferences, but neither of these would work due to the missing client certificate support.
    I came to the conclusion that the relevant applications in OS X have no proper SSL Client support build in. Since the underlying libraries and frameworks have everything in place that is really a shame.
    Would be nice, if someone would enforce the developers to do their homework there.

  • How can I configure hyphenation settings so that InDesign does not hyphenate already hyphenated word

    For example:
    twenty-seven
    It's okay to break at the hypen in the word, but I don't want either twenty or seven to be hyphenated. Is it possible to configure this in the hyphenation instructions? I don't see a way to do it other than manually adding every hyphenated word to the user dictionary.
    Thanks!

    A super-easy way to prevent this is to add a discretionary hyphen after the hyphen in a hyphenated word. This can be easily accomplished by doing a global find-and-replace.
    Find: -
    Replace: -^-
    This will allow all hyphenated words to break ONLY after the hyphen.
    Hyphenation settings should be determined based on the overall text. It is good to specify the minimum characters a word should have to be hyphenated — to prevent the hyphenation of very short words — but if you set that minimum too high just to avoid double hyphenated words, you may end up with too loose lines of text.

  • How can you configure a WD external to work with Time Machine??

    I have an 1TB external WD MyBook drive that is connected to my network through my Linksys wireless router and am trying to figure out how to format the drive to use with Time Machine.
    I currently use the drive to store files from both my PC and my MacBook but can't seem to select the drive to use with Time Machine. I figured that I could just format the drive through the Disk Utility program, but the drive doesn't show up in Disk Utility. This may be because it is a drive connected through my router and not directly to my MacBook?!
    Here are a few questions...
    Any ideas on how to format the drive so it will work with Time Machine?
    Once formatted to use with TM, can I still use the drive to store other files from both my Mac and PC? or do I need to partition for this??
    Is it possible to set up an automatic backup schedule that will happen via my home wireless connection?
    Thanks in advance,
    Todd.

    You cannot use the drive with TM as you have it set up. TM will not work with a networked drive except a Time Capsule or a USB drive connected to an Airport Extreme Base Station (current version.)
    If you wish to use this drive for TM backups it must be connected directly to the computer. Other computers on the network can access the drive for TM backups if you turn on file sharing for the drive (select drive, press COMMAND-I, check the box labeled "Shared Folder," click on the Enable button.) The shared drive will have to be mounted on the other computers in order for them to use it as a TM backup drive.

  • How can you maintain security settings with the pornographic sites are already on your computer and an 8 year old is using it. Please contact me and tell me ho

    My 8 yr old granddaughter uses this computer and while I was looking for a way to get rid of yahoo after deciding to dump Firefox because it is constantly quiting I was in the registry and found Yahoo in an area that is filled with pornographic sites. Not knowing how to get rid of this site I deleted the entire section. Looking at your browser doesn't do anything to address this problem and I WILL NOT use a web browser that does not have some type of security for sites that I DON'T WANT MY 8 YR OLD GDAUGHTER LOOKING AT! So buck up and get it done to prevent this.

    See:
    * https://support.mozilla.org/kb/Parental+controls
    * http://kb.mozillazine.org/Parental_controls

Maybe you are looking for

  • Error while implementing a web service in web dynpro application

    HI All, I am trying to use a webservice in a web dynpro application. Web service description:- This is a very simple application which takes two String inputs and when submitted displays the string in the concatenated form. Web dynpro:- I used this w

  • DVI - Sony TV doesn't work: PAL vs. NTSC ???

    I'm trying to connect my MacBook Pro via a DVI->HDMI cable to a Sony HDTV (KLV-V32A10E). The Displays Preferences detects the second display ("SONY TV"), but the TV remains blank. Interestingly enough, none of the preferred suggested resolutions (i.e

  • HP Laserjet P2055dn Paper Jam Tray 2

    Hi can anyone help - have a laserjet P2055dn Product No. CE4549A, error message saying "paper jam in tray 2" there is no paper jam and when you press clear it prints the page! does this everytime,any ideas?... PS Tray 1 works ok

  • Issue to Add one new column in search Page..

    I have a JSP file of Service Form of Oracle Install Base . In this on select party Site page when search for any item it shows some result as a column. like address , name, country.. we have to add a new column in that search. means when we search fo

  • How to get total of any field in sapscript?

    Hello , i m making sapscript... How to get total of any field in sapscript?