How can you even out the skin tone/color from a raw photo on photoshop or bridge?

Hello all,
I am trying to figure out how to even out the skin color, I have a picture of a model, unfortunately due to light and make up and her skin color the color of her face and her hands and body dont match, I think I saw a video on youtube where the skin color was evened out throughout the picture from raw I think this was done on bridge but I am not sure.
any one can please explain how to even out the skin color eitther on PS or bridge?
I currently have CS5 on a win 7 pc.
many thanks

There are any number of resources on portrait touchup. Start by googling.

Similar Messages

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • How do you cut out the part of an image in a photo?

    How do you cut out a part of an image on a photo that you have added to Pages. For example, if I have added a picture of a giraffe to Pages how would I cut out the giraffe from the image and get rid of the rest of the image

    You can use the instant alpha tool to make the background transparent.
    FYI: Pages is part of iWork, not iLife.

  • How can you find out the balance on my I tunes gift card?

    I bought two $ 100 gift cards and both found to be redeemed although the cards were in my safe and the code was intact covered with plastic. Finally Apple put the money back into the defective cards. My question is how to find out whether the cards are good and have $ 100 value each? If I use my I phone then the amount will go to my account and I seldom use I tunes cards. The cards we bought is for our son and daughter. Secondly I bought the cards from Best Buys and both the cards were in my possession with gift wrap. How on earth the cards were redeemed? Appreciate any feedback. Thanks.
    Notredame99

    Hi there notredame99,
    You may find the information in the article below helpful.
    iTunes Store: iTunes Gift balances
    http://support.apple.com/kb/ht5035
    -Griff W. 

  • HT201320 How can you figure out the password for college email providers?

    I'm trying to configure my mail account. I want to use my college email but I don't know the provider password. How can I find that out?

    IT = Information Technology

  • How can I even out the volume levels of my audio?

    Hi,
    I'm fairly new to FCE and to editing in general.
    I've got a clip which contains a conversation, my camera is pointed at one of the speakers and their side of the conversation is significantly louder than the other.
    Is there a filter I can use to make the loud side quieter and the quiet side louder in order to hear both sides of the conversation at roughly the same volume?
    TIA,
    Rob.

    Hi Rob,
    I asked a similar question recently, and though I ended up concluding the easiest thing was to just adjust the volume manually as Ian suggested, you can take a look at the suggestions I was given about possible filters and such here: http://discussions.apple.com/thread.jspa?threadID=1564173&tstart=0
    Hope that helps; good luck!
    Claire

  • How can you find out an individual image size from multiple images on a canvas

    This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
    Thanks

    I want to know they exact dimensions though. You can get them by dragging to the 0,0 corner and then reading off of the ruler scale on the sides but its fiddily as you have to zoom right in and work it out. I know in photoshop there is a ruler but is there any other way in Elements?

  • How can i sort out the N lowiest elements from an 1D array faster than using the build in sort function (1D-array) in Labview?

    I need an algorithm that is based on the same sorting-algorithm that Labview uses (or one that is just as fast) but it only needs to sort out the N lowiest elements (and the N-element output array don't need to be sorted).
    /Jonas

    I want all three zeros in the output. You can se the algorithm that I'm looking for as a soft version of Labviews own sort algorithm that only gives you the N (always less then the length of the array) lowiest values as output.If two elements contain the same small value both should be sorted out.
    /Jonas

  • How can you find out if your mac is infected with the flash back virus

    how can you find out if your mac is infected with the flash back virus?

    F-Secure's Flashback removal tool - http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_k.shtml - supposedly also works on OSX 10.5 and earlier.
    05 Apr 2012 How to Detect and Protect Against Updated Flashback Malware - http://tidbits.com/article/12918 - detection methods for multiple browsers and general information
    Leopard and earlier users see recommendations at: https://discussions.apple.com/thread/3872491

  • HT4211 how can you find out what kb are being used by what apps

    how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone

    Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.

  • How do I even out the volume for songs in my playlist?

    How do I even out the volume for songs in my playlist?  Can I tell somewhere what the volume level is for each song and then change it so all the songs are the same, then re-synch?

    Hey Eegee
    I would turn on Sound Check to level out the songs. You do this by going to iTunes Preferences > Playback Tab > Check Sound Check.
    iTunes: About Sound Check
    http://support.apple.com/kb/ht2425
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How can I find out the dpi of an image in Acrobat.

    How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

    Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
    That opens a panel on the right.
    To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
    Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

  • How can I find out the mail server from email address?

    Hi:
    How can I find out the mail server from email address?
    for example: If I know the email address is [email protected],
    how to find the pop3 and smtp mail server?
    THANK YOU

    You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
    The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
    Sean

  • HT4356 I don't have wireless printer. How can I print out the document?

    I don't have a wireless printer. How can I print out the document from regular printer?

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • How can i find out the more than one times occurance of integer in a array?

    How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

    Kumar_Mohan wrote:
    How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
    Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

Maybe you are looking for