How can you get Premiere Elements to recognize hardware.  It will NOT recognize my Dazzle Video Capture device or either of two HP DVD burntes. I feel like I wasted my money.

That should have read, It will NOT recognize my Dazzle device or either of 2 HP DVD burners.

TNTerri
What version of Premiere Elements are you using and on what computer operating system is it running?
If Premiere Elements 13, please be advised that it does not support DV or HDV capture firewire. And, any USB devices
have never worked for that purpose for Premiere Elements (any version).
As for the burner not being recognized in the Burner Location field of burn dialog of the program, please consider
(if you are dealing with DVD CD burner rather than a Blu-ray DVD CD burner.
CD, DVD drive not recognized after Adobe application install | Windows
Depending on how matters progress, you may want to do an uninstall reinstall using the following scheme
Uninstall, the usual Control Panel way
Do a free ccleaner run through to get rid of leftovers from incomplete installs reinstalls
CCleaner - PC Optimization and Cleaning - Free Download
Reinstall with antivirus and firewall(s) disabled.
We might even involve later a deletion of the Adobe Premiere Elements Prefs file and, if necessary, the whole Folder in
which it exists. More on the latter later.
ATR

Similar Messages

  • How can I get Premier Elements to recognize my Canon Vixia  HV40 to record tape from it?

    I recently installed Adobe Premier Elements 12 on my new Lenovo U310 Ideapad computer.  I opened the program and was able to transfer a clip from a file transfered to me from a smart phone recording and start assembling a new home movie.  However, when I tried to get video footage from my Canon Vixia HV40 tape camcorder, I received a message "No HDV camera connected.  I then used my older Canon Vixia HV20 camera and changed the USB connecting cable, but that camera too was not recognized.  In the past, I had been succesfull using an older version of Premie Elements to get footage from my Canon camera.  Is it possible that this new Premier Elements 12 is not programed to pick up  these Canon video cameras or is their some way around this problem.  My new computer does not have a 1394 input. 

    TR Snevac
    As far as I have ever seen reported DV or HDV data capture into Premiere Elements Capture Windows (any version) does not work unless the connection is firewire. And, there are occasions (especially with HDV capture firewire) the require that the capture firewire be done in HDVSplit and then the split clips imported into a Premiere Elements project via the typical Get Media/Add Media route.
    Which version of Premiere Elements allowed you to do a DV or HDV capture firewire in to its Capture Window using a USB connection? From what you wrote it gave me the impression that you were saying that you had.
    If you have followed the protocol for HDV data capture firewire into Premiere Elements 12 (with correct project preset)
    http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
    then you would need to explore the use of HDVSplit (firewire connection) and then import of the .m2t split clips from that process in to Premiere Elements 12 (Add Media/Files and Folders/Project Assets).
    http://strony.aster.pl/paviko/hdvsplit.htm
    If both these Canon camera are miniDV camcorders, then you need a firewire connect to the data capture into Premiere Elements Capture Windows.
    Do you have access to a computer with a firewire port?
    Or
    Does your computer have what is referred to as a PCMCIA slot for use with a firewire card? Have you looked into the possibility? No sure if that will work for you.
    ATR

  • How can I have Premiere Elements 8 recognize a Panasonic AG-DV2000 deck?

    I select the AG-DV 2000 deck from the drop down menu but it won't recognize the Firewire connection. I also have a AG-DV2500 deck that it does
    recognize.

    In Premiere
    Elements 8, I go to the
    Edit Menu, to Preferences, to Device Control, to Options.
    A drop down DV/HDV Device Control Settings window
    allows me to select:
    Video Standard: NTSC
    Device Brand: Panasonic
    Device Type: AG-DV2500P
    Timecode Format: Auto Detect
    Check Status reads "Offline" when the AG-DV2500P is connected.
    It reads "Online" when an AG-DV2000P machine is connected and
    selected as the Device Type in the drop down menu.

  • How can I get rid of a stuck update which will not install or cancel?

    I asked for updates to add-ons. One update turned out to be for McAfee Site Advisor. I restarted the computer but after restarting the update shows as "This update will be installed when Firefox is restarted" even though it had just been restarted. I tried restarting again, twice, but there is no change. I tried to cancel the install but clicking on Cancel does nothing. So I cannot install the update and I can't get rid of it. What now? The other updates were OK.
    Firefox 3.6.20, XP Home/SP3.
    Thanks.

    If files already have been downloaded then you need to remove the files in the updates and updates\0 folder.<br />
    You can delete active-update.xml and updates.xml as well if present.
    C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
    If there are problems with updating then best is to download the full version and uninstall the currently installed version.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Adobe CS4 Indesign plugins missing when installed on brand new MacBook Pro. How can I get these missing plugins? Indd. files will not open

    Please Help!
    Adobe Chat doesnt deal with old products
    Apple Genius Bar says to talk to Adobe.
    HAD a 2008 MacBook Pro with Adobe CS4 installed
    now have a brand new MacBook Pro (and used my time machine to back up from my old mac) and when trying to open InDesign files - gives a list of plugins that are missing and will not open the document.
    I'm a graphic designer- so this is not an option..
    Please Help!

    You can install Adobe Programs ONLY from the originals installer which is provided from Adobe. Time Machine (which is a form of migration) will not result in working Adobe programs. As Bob said, use the Creative Cloud Cleaner Tool, which is also working for CS versions, to wipe out everything from Adobe and start with a clean installing.
    I am not sure, if CS4 is running on Maverick, at least it is not supported officially, your are here alone. It might be so that you have to upgrade your software to a later version.

  • How can you get the unknown  previous owners on iPhone 5 Apple ID account be removed old device from Find iPhone ?

    After recent update 7.0.3 iPhone 5 started activation after I put in sim and did not accept sim bc of Apple ID of previous owner was still on the iPhone and can't activate it without the previous owner removing the account from find my iPhone .

    lisa0721 wrote:
    Did you find this in a best practices document?
    No, you first use common sense then you put it in a company IT policy document. So you are saying that you cannot create an Apple ID for each individual, because it is a hassle? So I guess it is also a hassle to create company email accounts because there are many people "coming and going"?
    Have the IT department create an Apple ID for each user with a "temporary" password. Then the user can change it. Once the emplyee leaves, he turns in his phone and gives the password to IT so they can deactivate his Activation lock and reset the phone. Or do what razmee209 has suggested.
    I guess the above might be a problem in your company where it is apparent that people are getting run over by buses all of the time and dying every hour.

  • How can you get a calendar back after deleting it

    How can you get a calendar back after deleting it

    You will have to restore the device from a backup on icloud.  (this assumes you have backups turned on in settings>icloud)
    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your device.  Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.

  • How can I get Photoshop Elements 13 to recognize my Epson WF-3520 multi-purpose scanner?

    How can I get Photoshop Elements 13 to recognize my Epson WF-3520 scanner?

    Can you try renaming the %APPDATA%\Adobe\Photoshop Elements\13.0 folder and see if it helps.
    Thanks,
    Anwesha 

  • How can you get 2 videos to play simutenously together?

    How can you get 2 videos to play simutenously together so both are playing side by side on screen at the same time? 

    Welcome to the forum.
    As Steve observes, what you are talking about is called "PiP," or Picture in Picture.
    He has given you the basics of creating a "split-screen" PiP, and that should be exactly what you wish to do.
    For more detail, plus more ways to do PiP, I strongly recommend his book, Cool Tricks & Hot Tips for Adobe Premiere Elements 11, from Muvipix. He has an entire chapter (Chapter 10) on PiP, and many of its uses, with detailed instructions on the settings to accomplish it. Just that one chapter is worth the price of the book.
    Good luck, and happy editing,
    Hunt

  • HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

    when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

    What version of iTunes are you running on your computer? You need to update to the current version.

  • How can you get a mirror image of a photo on iPhoto?

    How can you get a mirror image of a photo on iPhoto?

    By using an external editor. Preview is already on your Mac. It's called 'Flip Horizontal'
    In order of price here are some other suggestions:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate or the App Store.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

  • How do you get Premiere Pro CS4 frames into Photoshop

    Hi I am trying to modify a series of Premiere Pro Frames by coloring a small section of them in Photoshop 7. How do I pull those frames out of my timeline, get them into Photoshop, and then back into my timeline? I remember doing it with Premiere 6.5, but I can't figure out how to do it with CS4.

    Thanks guys, I'll take it from there.
    Terry Lee Martin
    Date: Wed, 2 Sep 2009 17:15:26 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do you get Premiere Pro CS4 frames into Photoshop
    Yes, PS-Extended will make things a bit easier. While not perfect, it simplifies rotoscoping quite a bit.
    Good luck,
    Hunt
    >

  • How can I get photoshop elements to open my nef images?

    How can I get photoshop elements to open my nef images?

    The D3200 requires at least ACR 7.1, which isn't compatible with any version of PSE prior to PSE 11, so no, you can't do this directly in PSE 9.
    You could upgrade PSE, use the Nikon software to convert the files and then open the resulting images into PSE for further editing, or download the free Adobe DNG converter to convert your NEFs to DNG files that your version of PSE can understand.

  • How can I get the phone to recognize mini SD Card?

    I have a 32G Sandisk SD Card in the G4 mini but one day the phone said the card was blank and unsupported.  I purchased another SD Card and installed it however the phone does not recognize that I have an SD card.  When I try and save music or pics to the card the phone says I have removed the storage.  How can I get the phone to recognize the card storage?

    First of all do you Mount or Unmount the card from the settings menu before pulling the card out of its slot? Make sure that the option Mount is greyed out in you settings menu when the card is in the phone. If not select it.  If you pull the card out of the phone select Unmount first.  You can also try formatting the card from the same settings menu.  If these two things do not work, then either the card is defective or the card hardware slot is defective.

  • How can i get apple tv2 to recognize more than one computer in my house

    how can i get apple tv2 to recognize more than one computer in my house, I just got it and can only find one of two computers in my home

    Same here. I have 1 ATV2 and 2 computers and each has separate iTunes accounts (mine and my wife's). The ATV menu says "computers" so I presume you can have more than 1 computer on 1 ATV. The big question is how do you set it up?

Maybe you are looking for