How Convert AIR-AP1262-C-K9 standalone AP to controller based AP?

How Convert AIR-AP1262-C-K9 standalone AP to controller based AP? Is that possibe ? how?

Hi,
First follow these steps to convert to LAP:
http://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/
WLC Model: Its all depneds on your requirement.
Its a small enterprize then go for 2500 series otherwise go for 5500 series.
Regards
Dont forget to rate helpful posts

Similar Messages

How to convert AIR-AP1041N (autonomus) to AIR-LAP1041N (lwapp)

Hi,
some days ago I succesfully converted AIR-LAP1041N (lwapp) to AIR-AP1041N (autonomus).
I used c1140-k9w7-tar.124-25d.JA1.tar which is available to download in Download Software Section for this AP.
But there are any autonomus to lightweigt firmware for this AP.
I tried to use c1140-rcvk9w8-tar.124-21a.JA2.tar for 1140 but AP hungs after that.
How can i back to LWAPP version in 1041?

this is what can i see on the console:
Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...#########################################################################################################################################################################################################################
File "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" uncompressed and installed, entry point: 0x4000
executing...
enet halted
ŔŔŔŔŔŔŔŔŔŔŔŔŔ&/îçďä/÷Řč/ěČÔÓďěĐďçô3Ď/ěÜě/ěŘŔČ/ďŕ÷4Ç/ďÓď÷÷óÜ÷ÜŔČ/÷ÜÇ÷÷ÜëĎ/ěŔÄ/ďĐ/ěŔď÷ďËĎĎ÷7ËĎ÷ďŔÓď/đĂç/ďÄĎ÷3ÇďŔčď÷ÜËďďć/÷Řč/÷÷÷ÜŔĂďÜÜËďŔĚď÷Üč÷Ü÷÷ŢÜëĎ/Ď/ďěä/÷ĐÇ/óÜ÷ěŔč÷3Ŕď÷7Ű/ěäď/÷0ŘÜĐß/÷/ďč/ěäÜÔßĎîčďďĂĎ/ěŔŰŔ$/ěçďä/÷Řč/ěČ/đĂ$/÷ěĐďçÜŘŘ//ďç/ěŔĂďŔ
/Ď;ÜÜËďĎóÜçäÜäćďŰăóŔĂĎ÷ěŔç/ďÄ/Ď/ďěä/÷ĐÇoóóÓŔĐÓ/÷ŔßĎěŔč÷3Ŕ$/÷ěĐďçÜ÷÷ëËď÷÷4Ç/÷čĂďĂÜĎ÷îŔď÷7ŕ/ďč/ěä/đĂ'ď÷ěčďďĂĎ/ěŔÇ÷0ëď/ěŔĂďĎčĎ;ÔŔç/ěÇĎóĚëäÜääďŰďŕăçÜŔŔŔŔŔŔŔŔŔŔÇ/÷ÜÇď÷ÜÔóďďË/÷ÜŘŔĎ÷ŘÜŔŔŔŔŔŔŔŔŔŔăďŕŔ//ěçďŔ(/ď/÷0Üčä/÷ďË/đĂŔŔŔŔŔŔŔŔŔŔŔ'/Ď÷Óßď/ěŘŔ/÷4Ěď÷ÜÜ/÷0ŔóëăçčŰăďŕěÜÇď÷ÜôôÔŔ'ď÷ěčďďĂĎ/ěŘŔ/ŢçŕŔ'ď÷ěčďďĂĎ/ěŔĐ/ÜçŕŰ$ďĎë/ÜëđŰóëËĎď/÷÷÷ÜĚÜčĐäăĂ/óÓ0óÔ
but i connected this AP to dhcp server i see that AP recived IP address from DHCP i tries to search conntroller (i can see frames from AP in wireshark, req to DHCP for CISCO-CAPWAP-CONTROLLER).
so in next days i will try to connect AP to the controller (wlc is in different site, without vpn connectivity).
i think that AP is bad, because of this "weirid chars" on console, but maybe when ap updates firmware from wlc, it will be OK.
thanks for help for now.

How to call SAP Webservice in standalone java program

Hi,
In our Java application, we want to use the SAP Webservices. I dont know much about authentication mechanism used by SAP. Can any one please help me with any sample code how to Call SAP webservice in Standalone Jave Program. I searched alot on the web regarding this, but helpless. Please help me.
Thanks,
Mohan

Hi Mohan,
You need an account for the ES Workplace. I'm afraid this is not free, e.g. check [SAP NetWeaver, Composition Subscription|https://www.sdn.sap.com/irj/sdn/subscriptions/composition].
But I thought you wanted to play with a WSDL [you already had at hand|Sample code to access BAPI Web services from JAVA required;?

How convert a color pdf to black and white pdf...? new acrobat in creative cloud cs6

how convert a color pdf to black and white pdf...? new acrobat in creative cloud cs6

Print Production << where is this in XI...?

How convert a color PDF File to black & white (gray scale...no color)

How convert a color PDF File to black & white (gray scale...no color)??? creative cloud cs6... Acrobat etc

Hi, just wanted to add my 2¢
I've been in publishing over 25 years and live in Acrobat for making my final files. Currently with a newspaper.
This is what we do:
• Tool Panes > Print Production Window
• Select CONVERT COLORS
• Midway down under OUTPUT INTENT, check Convert Colors to Output Intent
• In the associated drop down menu, I choose (because I'm printing on newsprint) DOT GAIN 20% – If you're working on better stock, choose a lower dot gain percentage.
• Click OK – this will convert the file
• Save
Note: this affects the file you're working with. Make sure that you use this method on a COPY if you want to retain the original color version.
I think if you compare my method to the Preflight method, you'll see a tighter contrast and better blacks. I've always felt the Preflight method left continuous tones a little muddy.
Now if there was only a way to add that to ACTIONS...!

In fact it's about mac:excel, how convert in a cell a number written in text format into a value?

in fact it's about mac:excel8 or 11 in OSX10.7.4,
how convert in a cell a number written in text format into its value?
cheers francois

Hi francois,
If I copyone of them and do a past special/value, it does not work.
Try just Paste instead of Paste Special > Value
I know your question is about Excel, but this works in Numbers:
Copy 1 234 567 (with spaces) and Paste (not Paste Special) into a Cell in a Numbers Table. The result is 1234567 and it behaves as a number. A formula will consider it to be a number:
You asked Wayne: what do you mean by "to reference a cell" ??
The reference is from Cell A2 to Cell A1 through a formula, such as: =A1+1
Regards,
Ian.

How to configure SOAP in OC4J Standalone

Hi
I recently installed the soap.ear in OC4J 903 standalone. I'm using Oracle JDeveloper 903 to access the web service but the test operation throws:
Testing connection...
Not using Proxy Server
java.lang.Exception
     org.apache.soap.rpc.Response oracle.jdevimpl.webservices.util.JDevServiceManager.invokeMethod(java.lang.String, org.apache.soap.rpc.Parameter)
          JDevServiceManager.java:255
     java.lang.String[] oracle.jdevimpl.webservices.util.JDevServiceManager.list()
          JDevServiceManager.java:297
     void oracle.jdevimpl.webservices.wizard.connection.TestConnectionPanel$2.run()
          TestConnectionPanel.java:275
Unable to connect to SOAPServer (http://localhost:8888/soap/servlet/soaprouter)
Connection test failed: unable to connect
Can somebody tell me step by step how can I make OC4J 903 standalone work with JDeveloper 903 for web services?

This posting has the trick that you need to follow to get the standalone OC4J to work with soap.ear:
access HttpRequest in web service?
It sounds like your deployment went fine, its just the JDev piece that doesn't work - edit soap.xml and make sure the following lines are there:
<osc:serviceManager>
<osc:option name="autoDeploy" value="true" />
</osc:serviceManager>
My guess is, that if you type that URL into a browser, you will get back the "correct" error message saying something like the Oracle SOAP server only accepts posts not gets.
Mike.

Pls suggest me on "How to trigger PPF via a standalone program?"

Hi All,
Can some pls explain me how to trigger PPF in a standalone report program. Provide me some examples.
Thanks in advance.
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 28, 2011 3:45 PM

hi
whenever changes made to an application document.u want to replicate these changes in target system u have to work with cahngepointers
RBDMIDOC is the program which u have to schedule background
regards
Nagesh.Paruchuri

How convert ISO 8859-1 (Latin-1) to char

i use java read some web page, it contain ISO 8859-1 (Latin-1) Characters, like this:
&#233
&#234(i removed ";" at end)
how convert it to char?
thanks.

Tin,
I think you're looking for Charset.decode and maybe encode.
keith.

How convert a big image to parts of images? means split a jpg image to several sub imges.(this sub image can joint into that big image)

hi friends..
how convert a big image to parts of images? means split a jpg image to several sub imges.(this sub images can joint into that big image) any help
Solved!
Go to Solution.

In the example, i have created two images and added them together, and the converse can be done in the same way.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

How convert to below lab window ansi c program in to labview

hi
here how convert to below lab window ansi c program in to labview program ,please find any body sollution for this problem.
Attachments:
Template.c ‏8 KB
Template.uir ‏13 KB

Instead of starting with old c code -- which is likely only marginally useful anyways -- you should start with program requirements.
What does the program do? What are the operational constraints? You know, all the usual stuff.
Mike
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Can AIR-SAP2602E/I-C-K9 convert to controller based AP?

Can AIR-SAP2602E/I-C-K9 convert to controller based AP?
both S2G1K9W7-15202JA/ JB available?

here are the procedure:
https://www.youtube.com/watch?v=wWDrFjwVNb0
http://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/
Regards

How convert Windows C++ code to Linux?

How convert Windows C++ code to Linux code?

Thanks,
Maybe someone can convert this simple windows code to linux:
PlaySoundA("a.wav", NULL, SND_FILENAME | SND_ASYNC);
or this:
char b[999999];
WAVEFORMATEX wfex;HWAVEOUT hwo;
HMMIO m_hmmio; // MM I/O handle for the WAVE
MMCKINFO m_ck; // Multimedia RIFF chunk
MMCKINFO m_ckRiff; // Use in opening a WAVE file
DWORD m_dwSize=0; // The size of the wave file
WAVEHDR whdr;
HANDLE hDoneEvent = CreateEventA(NULL, FALSE, FALSE, "DONE_EVENT");
wfex.wFormatTag = WAVE_FORMAT_PCM;
wfex.nChannels = 1;
wfex.nSamplesPerSec = 22050;
wfex.nAvgBytesPerSec = 44100;
wfex.nBlockAlign = 2;
wfex.wBitsPerSample = 16;
waveOutOpen(&hwo, WAVE_MAPPER, &wfex,(DWORD) hDoneEvent, 0,CALLBACK_EVENT);
m_hmmio = mmioOpen("a.wav", NULL, MMIO_ALLOCBUF | MMIO_READ );
MMCKINFO ckIn; // chunk info. for general use.
mmioDescend( m_hmmio, &m_ckRiff, NULL, 0 );
mmioDescend( m_hmmio, &ckIn, &m_ckRiff,MMIO_FINDCHUNK );
mmioSeek( m_hmmio, m_ckRiff.dwDataOffset + sizeof(FOURCC),SEEK_SET );
m_ck.ckid = mmioFOURCC('d', 'a', 't', 'a');
mmioDescend( m_hmmio, &m_ck, &m_ckRiff,MMIO_FINDCHUNK );// )
m_dwSize =m_ck.cksize;
MMIOINFO mmioinfoIn; // current status of m_hmmio
mmioGetInfo( m_hmmio, &mmioinfoIn, 0 );
for(DWORD cT=0;cT<m_dwSize;cT++) {
if(mmioinfoIn.pchNext==mmioinfoIn.pchEndRead) {
mmioAdvance( m_hmmio, &mmioinfoIn, MMIO_READ );
*((BYTE*)b+cT)=*((BYTE*)mmioinfoIn.pchNext);
mmioinfoIn.pchNext++;
mmioClose(m_hmmio,0);
ZeroMemory(&whdr, sizeof(WAVEHDR));
whdr.lpData=b;
whdr.dwBufferLength =m_dwSize;
waveOutPrepareHeader(hwo, &whdr, sizeof(WAVEHDR));
waveOutWrite(hwo, &whdr, sizeof(WAVEHDR));
while (!(whdr.dwFlags & WHDR_DONE)) {
WaitForSingleObject(hDoneEvent, INFINITE);
waveOutUnprepareHeader(hwo, &whdr, sizeof(WAVEHDR));
waveOutClose(hwo);
But I use Quincy (http://codecutter.net/tools/quincy/)with Wine and creating that .exe files.
Quincy not create 'makefile' (I not understand why me need 'makefile' edit and from were I can get it?) files, it create 'filename.o' files only.
And I understoond, then read Wine text, that with Wine (http://www.winehq.com/) possible convert Windows code to Linux, but do not known how.
How convert Windows code to Linux with Wine?

Need assistance how to configure RDS on a standalone Server 2012 R2 not joined to a domain

Hi,
I need help on how to configure RDS on my standalone server 2012 R2 that is not joined to a domain. I would also like to see the counterpart of Terminal Services Manager.
I am familiar with Terminal Services on my old Server 2003 which I migrating.
Thank you for your assistance.
Sincerely,
Ramon

Hi,
the dedicated RDS/TS forum is here:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverTS
Some useful articles, which seem to answer your questions:
http://support.microsoft.com/kb/2833839
http://ryanmangansitblog.com/2013/10/30/deploying-a-rdsh-server-in-a-workgroup-rds-2012-r2/
http://support.risualblogs.com/blog/2014/03/10/setting-up-a-2012-r2-rds-gateway-for-a-workgroup/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How convert to mobile...eg apply touch where as exist click event(mainly for javascript or jQuery, w

I built a tinyStickyNotes App and works in PC browsers, how convert to mobile...eg apply touch where as exist click event(mainly for javascript or jQuery, well needed develop two versions of my App mobi/PC?)?
Really needed this or phone gap do the job?
a phone gap book includes what needed change (in this case) or look for a ...?... Book?
Also, not needed registered as phone gap user 9.99/mo if I am adobe creative cloud member, that's correct? yes correct / no needed
Cloud file drive(file explorer win or mac), may installed and in my computers not have creative cloud apps on them?

absolutely. Being that there will be no touch events via the mouse and mouse events via the touch screen, the two should not conflict with one another. In the future css specifications, there will be something called touch points which will handle the events no matter the input.

How Convert AIR-AP1262-C-K9 standalone AP to controller based AP?

Similar Messages

Maybe you are looking for