How create a 100µs impuls (arb wave)

Hello
I created an arb waveform. Within Labview I can also change the time constant. However, on the hardware (USB-6361 with 10MHz DIO) I receive only 1ms impulses instead of 100µs impulses.
Currently I am working on a Labview Evaluation Licence. The full labview licence is installed and available at the licence manager, however there are some problems. I am working on that. I mention this as this might also be the reason for my hardware problem.
I included the VI. The first two analog signals are for creating a certain reference and supply voltage. The sencond one is the digital output which should be 100µs instead of 1ms which I measure with the ocsilloscope.
Thanks.
Hello,
Solved!
Go to Solution.
Attachments:
Test_100micro_Puls.vi ‏28 KB

duplicate post!
Please stick with one thread for one question!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

How many instance created for 100 request in servlet?

Let me know the answer

STM12 wrote:
Subject: how many instance created for 100 request in servlet?
Let me know the answerInstances of what?

HT4168 I have created an 100 page booklet in Pages, with many photographs, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?

I have created an 100 page booklet in Pages, with many photographs, and much written word, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?....
Basically what I want to do is publish the document into both an eDocument, and a hard copy document. What is the best way to do this?

No Peter, this statement came right off the Apple ePub statement when outlining how to use ePub. the full context is:
Creating ePub files with Pages
Summary
Learn how to create ePub files with Pages.
Products Affected
Pages '09
ePub is an open ebook standard produced by the International Digital Publishing Forum. Pages ’09 lets you export your documents in ePub format for reading with iBooks on iPhone, iPad, or iPod touch.
iBooks supports both ePub and PDF file formats, and you can export both from Pages.
When to use ePub or PDF
Use ePub when text is the most important part of your document, for example when you create a book, a report, a paper, a thesis, or classroom reading material.
More details on using ePubUse PDF when layout is the most important part of your document, for example when you create a brochure, a flyer, or a manual with multiple illustrations.
More details on using PDF
Creating an ePub Document to Read in iBooks
You can export any Pages word processing document to the ePub file format for reading in an ePub reader, such as the iBooks application on the iPad, iPhone, or iPod touch. Documents created in page layout templates can’t be exported to the ePub format.
Documents exported to ePub format will look different than their Pages counterparts. If you want to get the best document fidelity between the Pages and ePub formats, style your Pages document with paragraph styles and other formatting attributes allowed in an ePub file. A sample document is provided on the Apple Support site that features styles and guidelines to help you create a Pages document that’s optimized for export to the ePub file format, which you can use as a template or a guide. To learn more about using paragraph styles in Pages, see the topics under the heading “Working with Styles” in the Pages built-in help.
To read your ePub document in iBooks on your mobile device, you must transfer the ePub file that you create onto your device.
To use the “ePub Best Practices” sample documentTo learn more about using the ePub format and get a better feel for how a Pages document might appear as a book in iBooks, it’s a good idea to download the “ePub Best Practices” sample document. After reading the guidelines and instructions within the document, you can use it as a template to create your own document. You can also import the styles from the sample document into a new document you create.
Download the “ePub Best Practices” sample document at the following web address:
http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
Do either of the following:Use the sample document as a template.Import the paragraph styles from the sample document into a new or existing Pages document.
Export the document you create to ePub format to see how it looks in iBooks.
Preparing an existing Pages document for export to ePub format
Documents exported to the ePub format automatically appear with page breaks before every chapter. A table of contents is automatically generated, which allows readers to jump quickly to any chapter title, heading, or subheading in the book. In order to create a meaningful table of contents, it’s important to apply appropriate styles within your document. The ePub reader uses the paragraph styles to determine which items should appear in the table of contents for your book.
Note: The Pages document must have been created using a word processing template.

How Create procedure or function with ADO ?

Hello,
How Create procedure or function with ADO?It's my question.
Thanks.
Henri

This message if post by Taiwan-ChangHaw-Oracle-Stored-Procedure-For-Business-Rule-Club
public bool ConnectDatabase()
try
{ string strConnectionString =
"Provider=OraOLEDB.Oracle" +";"+
     "Data Source=" + ConnectionParams.Datasource +";"+
"User Id =" + ConnectionParams.Username +";"+
"Password =" + ConnectionParams.Password;
     m_conn=new ADODB.Connection();
     m_conn.ConnectionString=strConnectionString;
     m_conn.Open("","","",0); //i_"YYAOl Open the connection
catch(Exception e)
{     System.Windows.Forms.MessageBox.Show(e.Message);
     return false;
return true; //YYAOl_B>3I9&connected successfully
public void InsertDescription(string p_product,string p_language,string p_tname,string p_tdescription)
{ string sql="{Call inserttranslateddescription(?,?,?,?,?)}";
try
{ ADODB._Command cmd=new ADODB.Command();//Create a command object
cmd.ActiveConnection=m_conn; //Set its active connection to open connection
ADODB.Properties properties=cmd.Properties;//Get the command properties into ADODB Properties object
IEnumerator ienum=properties.GetEnumerator();//Get an enumerator on above properties
ADODB.Property singleprop;
while(ienum.MoveNext()) //iterate through the enumerator
     {singleprop=(ADODB.Property)ienum.Current;//Get the current property from enumerator
     string propname= singleprop.Name; //Get the name of current property
     if(propname.Equals("NDatatype")) //if the property is 'NDatatype' set its value to true
     singleprop.Value=true;
cmd.CommandType=ADODB.CommandTypeEnum.adCmdText;
int pid=Int32.Parse(p_product);
ADODB._Parameter langid     =cmd.CreateParameter("langid",          ADODB.DataTypeEnum.adChar,ADODB.ParameterDirectionEnum.adParamInput, 100,p_language);
ADODB._Parameter productid =cmd.CreateParameter("productid",     ADODB.DataTypeEnum.adNumeric,ADODB.ParameterDirectionEnum.adParamInput, 100,pid);
ADODB._Parameter tname =cmd.CreateParameter("tname",          ADODB.DataTypeEnum.adBSTR,ADODB.ParameterDirectionEnum.adParamInput, 50,p_tname);
ADODB._Parameter tdescription=cmd.CreateParameter("tdescription",ADODB.DataTypeEnum.adBSTR,ADODB.ParameterDirectionEnum.adParamInput, 50,p_tdescription);
ADODB._Parameter check          =cmd.CreateParameter("check",          ADODB.DataTypeEnum.adNumeric,ADODB.ParameterDirectionEnum.adParamOutput,100,0);
cmd.Parameters.Append(langid);
cmd.Parameters.Append(productid);
cmd.Parameters.Append(tname);
cmd.Parameters.Append(tdescription);
cmd.Parameters.Append(check);
cmd.CommandText=sql;
//Execute the command to insert product details in database
object recs;
object param=p_language;
cmd.Execute(out recs,ref param,1);
ienum.Reset();
while(ienum.MoveNext()) //iterate through enumerator
{ singleprop=(ADODB.Property)ienum.Current;//Get the current property in to Property object
string propname= singleprop.Name; //Get the name of current property
if(propname.Equals("NDatatype")) //if it is 'NDatatype' set its value to true
singleprop.Value=false;
IEnumerator iprop=cmd.Parameters.GetEnumerator();//Get the enumerator for command parameters
while(iprop.MoveNext()) //loop through enumerator
{ //Get the current parameter in enumerator
ADODB._Parameter checkval=(ADODB._Parameter)iprop.Current;
if(checkval.Name.Equals("check")) //if the parameter is 'check'
if(checkval.Value.ToString().Equals("0")) //If check's value is zero data was inserted
System.Windows.Forms.MessageBox.Show("Product details Inserted successfully");
else
System.Windows.Forms.MessageBox.Show("Product Details Updated");//else data was updated
catch(Exception e)
System.Windows.Forms.MessageBox.Show(e.Message);//Display any error message
}

How to organize 100 hours of rushes ?

How to organize 100 hours of rushes ?

AppleMan1958 wrote:
… in a single event, and then navigate through keywords?
I don't know the answer. I am just trying to understand.
I just tried to suggest that there is much, much, much more to organize than just doing 'folders'.
A year of my soccer recordings is about ~2TB either (but in diff. Events, I have to confess), no prob for FCPX - and for my no-budget hardware!
.... I got 'sensitized' when PC-friends proudly showed me there music-Libraries .... all handcrafted, matryoshka-esk folders-in-folders-in ... demoing how simple iTunes creates specific playlists by using tags&keywords made them speechless ..
smart tagging alllows to find a specific sentence, a specific 'face', a specific stunt with a single click. And you're not limited in FCPX by a few tech. data (timestamp for example), but it starts with simple 'favorite-ising' and 'find people' (which, partly, works incredible precise!), and ends with your dozen, very own criteria, you can combine and mix as you like. And need.-
... and due to its data-base character of FCPX, size of media shouldn't matter ... imho.

How creates or modiyfiys the ivi.ini?

Hello
I am using serveral Ivi - Devices (ag3634a, ag3499 ,ag3220 ag53132) in a ATE system. The System is using TestStand 2.0.
I would like to use the IVI Step Tpyes for these devices.
But it failed with code -31617 (channel name not vaild)
After spending a hour in this great Forum, I found that i have to use the the channel names defined in ivi.ini.
But on the ATE - maschine there was not this file.
After copying the file from the my developer maschine to the ATE everything was working.
why was this file on my dev. maschine and not an the ATE maschine --> Both are using the same drivers
please tell me
How creates or modiyfiys the ivi.ini?
thanks
Juergen

Hello Juergen,
Ivi.ini depends on the version of IVI engine. This file is obsolet for last IVI engine (for version 2.0 and higher) and thay are using XML config store. The best way how you can configure and change your settings is MAX.
Specific cahnnels:
ag3634a has specific channel "1"
ag3499 depends on the module (see attached PDF file)
ag53132 has specific channels "1","2","3"
see attached screenshot. Remember that you must press save icon after all changes are done ;-)
Zdenek
Attachments:
virtual_channels.jpg ‏100 KB
doc.pdf ‏128 KB

How to load 100 CSV file to DSO / InfoCube

Hi
How to load 100 CSV files of transcational data to DSO / InfoCube?

Hi,
you can achieve to write the .bat (batch file program in windows)
.bat program it will convert to xsl to .CSV format.
in process chain you can use the OS COMMAND option while creating process chain.
it will first trigger the bat file then it will trigger the excel files and info package.
now i am also working on same scenario now.
please find the below doc how to create the process chain using os command.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0c41c52-2638-2e10-0b89-ffa4e2f10ac0?QuickLink=index&…
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3034bf3d-9dc4-2d10-9e93-d4ba01505ed9?QuickLink=index&…
Thanks,
Phani.

Converting an MP3 to WAV -- How can I convert an MP3 to wav format, 16 bit

How can I convert an MP3 to wav format, 16 bit, 44,1 khz? I like the program Switch which I know can convert MP3s, but how to I set it up for the specific settings that I need?

Just import into a logic session. Then bounce at the specs you require. Logic or Waveburner, iTunes and even Quicktime I think can each do this easily.
A question though. I am assuming you are converting an MP3 to 44.1/16 bit just so you can play the file in a consumer quality CD player?? IF so - that makes sense.
But if you are doing this because you think it will improve the sound quality of your MP3, I will save you some time here. It won't improve the sound quality at all. It will just turn the MP3 into a larger audio file.
44.1/16 bit resolution enables you to have a much better sounding file than MP3 formats, but not by going at it this way.
No offense to you if you know all of this already. I am assuming that you may not know this - because if you did you would also likely know how to convert an audio file.
Cheers
Darrell

In RSA Authentication Manager 7.1, how create multiple security domains

Hi,
RSA Authentication Manager 7.1 in configured with LDAP(Sun java system directory server); how create multiple security domains 7.1, is this security domains is releted to LDAP?
thanks

I think what you need to do is create an identity sequence with RSA as the selection in
Authentication and Attribute Retrieval Search List and AD in Additional Attribute Retrieval Search List. Then select this sequence as the result in the identity policy for the service

How create animation in oracle forms 6i

any one can guide me how create animation in oracle forms 6i

hello to every one..
my dear friend developer is a busniness application tool.you can create
animaiton on flash and other animaiton softwares and then you can call on froms.
best regard
amk

How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds

How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds it will only give me the option to choose wav?

Windows 7 uses .wav (wave) files for the sound events. The default folder that Windows 7 uses to store the sound files in is located at C:\Windows\Media.
You cannot use a MP3 file but there are lots of (WAV to MP3 converters) available on internet which can help you to convert MP3 to wav serving your purpose of changing system sound.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

How create header with user id time date to VC-report's output as display ?

How create header with user id time date to VC-report's output as display ?
This info should come from the VC - not all the way from R3-side via FunctionModule/BABI. So only userid, date, time to output as normal text (which is not editable of course). Thanks =)

Hi ann-mari
Go through following link may it help u
Form Item disabled based on portal role
/people/community.user/blog/2007/01/17/visual-composer-explorations-using-portal-roles-to-influence-ui-element-behavior
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/usingrolestoinfluenceapplication&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/passingvaluesvia+URL&
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1
Best Regards
````Satish````

How create account document from Sales Document?

Hi.
I hope you are doing well. The scenario is:
1.- Create Lead (Sucessfully)
2.- Create Quotation wrt Lead ((Sucessfully)
3.- Create Sales Order wrt Quotation (Sucessfully), into status tab I have add Transferred to bill. document status
4.- The billing document was created sucessfully, however The account document doesn't exist.
How create account document?
Note:
assign revenue account was configurated into spro
What about BP , I guest , need to create a Billing organization.
Regards.

Resolved to doing transfer to billing action into status tab

How create indesign using Java Script

I am new in indesign and want to create indesign application using JavaScript.
When i use AppleScript to create Indesign Application i use this statement
tell application "Adobe InDesign CS5.5"
set myDocument to make document with properties
end tell
Indesign Application create sucessfully.
How create Indesign Application using JavaScript ?
or what is equivelent statement of ( tell application "Adobe InDesign CS5.5" ) in Java Script.
There are some java scripting example given on forum or in sdk.These all example start with app.
when I debug these java script using ExtendScript ToolKit 3.6 It give error on app (undefined app).I think this app ia application object.
How create indesign application object app in javascript ?
While this script run sucessfully when i put these script in C:\Program Files\Adobe\Adobe InDesign CS5.5\Scripts
and to run these script use Scripts panel (choose Window > Utilities > Scripts), then double-click the script name in the Scripts panel in indesign application.But In this case first i start indesign application and then choose Window > Utilities > Scripts then double-click the script name in the Scripts panel.
I want to create Indesign Application (instance) using JavaScript.When I run or (debug) my JavaScript in any javaScript tool like ExtendScript ToolKit 3.6 then Indesign application should start, like in Apple Script.
Thanks

Thanks Vamitul for reply
For example when i run SelectObjects.jsx An InDesign CS5.5 JavaScript in ESTK then message prompt "Target Adove Indesign CS5.5 is not running. Do you want to lanch." Then on click yes Indesign application start.
I want to Know how indesign object "app" is created to start Indesign application on click yes.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/indesign/cs55-docs/In DesignScripting/InDesign-ScriptingTutorial.pdf
Like in VB to create indesign object we use CreateObject("InDesign.Application"). In javascript how create object say "app" of InDesign Application.
For example if i write
var myDocument = app.documents.add();
var myTextFrame = myDocument.pages.item(0).textFrames.add();
myTextFrame.geometricBounds = ["6p", "6p", "24p", "24p"];
myTextFrame.contents = "Hello World!";
in a simple text file and save it with .js extention and to open this double click on this it give error undefined "app".
Source :Microsoft JScript runtime error
So how define "app" or create indesign object ?
Thanks

How to post 100 records from R3 to file in XI

Hi,
Can any one explain me how to post 100 from R3 using RFC sender adapter to flat file.
thanks
dhanush.

hi
Follow this link it is helpfull to you.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=howtopost100fromR3usingRFCsenderadaptertoflatfile&cat=sdn_all
IDOC/EDI/ALE
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
Regards,
Santosh
Message was edited by:
Venkata Santosh Kumar Boddu

How create a 100µs impuls (arb wave)

Similar Messages

Maybe you are looking for