How create data type for coulmn name having special characters in IR
hi ,
any idea how to create how to do create data type for coulmn name having special characters
Hi Amit,
Can you ellaborate ?
Actually if you are reading a file(or anything else) which contains special characters, the data type can be created as done for other interfaces. But it is in the adapters that we actually take care of handling these special characters.
ShabZ
Similar Messages
-
How to do create data type for coulmn name as QS$FGD .
hi ,
In my database i have a column as QS$FGD.
How do i map it in XI , since $ is not accepted when u create a data type.
One way is to give alias at the databse level for the column . is there any other way to slove it .
Thanks
amitHi Amit,
Were you able to solve your issue? I'm facing the similar issue now. My DB table contains field names with '.' i.e. say xyz.abc. How to solve this??
I feel SP could be an alternative??
Thanks,
Hussain. -
Dynamically create data type for structure
Hello Experts.
how to create dynamic data type for structres. for example.
data lv_struc_name type strukname.
lv_struc_name = get_struct_name( ) ****** this method gives the structure name('ct_struc')
now I want to create one data type, which is having the type of lv_struc_name content.(ct_struct)
thanks
TimHi,
here is the link to really good presentation about generic programming ABAP351.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b332e090-0201-0010-bdbd-b735e96fe0ae
It contains examples how to create dynamic structure and tables.
Cheers -
JAXB compiler for class names with special characters
Hi,
I trying to run the xjc against an XSD where element names (class names) have an "_" in them. For eg ACCOUNT_AKG.
JAXB creates a class ACCOUNTAKG and omits the "_". I need "_" to be preserved in the class name of the class is generated.
Can someone show me the right direction , so I can create classes with "_" preserved in the class name.
This would be a big help
thanks
JaxHi,
I trying to run the xjc against an XSD where element names (class names) have an "_" in them. For eg ACCOUNT_AKG.
JAXB creates a class ACCOUNTAKG and omits the "_". I need "_" to be preserved in the class name of the class is generated.
Can someone show me the right direction , so I can create classes with "_" preserved in the class name.
This would be a big help
thanks
Jax -
Hey guys
i have a HTTP to File scenario where in my getting and XML file which has sone tags of this form
<ServiceDateTime dateTypeIndicator="PromisedForDelivery">2007-04-06</ServiceDateTime>
how should i create data type for this?
is this an attribute?
thanx
ahmadHi,
Just "Insert Attribute" by right-clicking on ServiceDateTime.
Regards,
Bill -
Error while creating data type
Hi
I am creating data type for the scenario from File to IDOC
Namespace urn:xiworkshop:groupxx:legacy is not defined in the software component version NEWPRODUCT , 100 of sap Object Message Type Vendor | urn:xiworkshop:groupxx:legacy references the inactive object Data Type Vendor | urn:xiworkshop:groupxx:legacy
Please help meHi;
First activate your namespace and then create the data type.
Namespace + default datatypes should be activated together.
Then your data type
Mudit -
How to create the Data Type for the receiver end?
Hello Expertise
I wanted to Create a Data type for Receiver end in PI.
Sender end is ECC.
Receiver end is SRM
Here's the Data type for Sender end as
Can anyone help to create the Data type for Receiver end i.e SRM.
Thanks in advance.
Regards
karanHi Karan,
Please don't call Sir, we are just trying to help each other.
Please go through below scenario's and check your configuration.
ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
regards,
Harish -
How to change data type for a field?
Hi Experts,
I have one std screen having one field having numeric type. So it will accept only numeric value. Remember I am using standard transaction.
Now my user wants to enter the special character like + or - in that field(having data type numeric).
How i can change the data type for the particular field so that it will also accept + or -?
Plz reply me as earliest as possible.
Thanks in advance.Hi salil ,
u have to change / create Domain of that Data Element.
but u have to check the Implications. i have done the same thing , but that one is Customer defined one , i got nearly 20 short dumps while doing the TP.
regards
Prabhu -
Urgent help: how to create data source for Weblogic RMI driver
Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhatDataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat -
How to create a hirarchy for this characteristic having lengh 50?
Hi guru's
I have a scenario like characteristic is having lengh 50.Now I want to create a hierarchy for this characteristic.
But Hirarchy allows maximum lengh 32chrs only.
So could you please let me know how to create a hirarchy for this characteristic having lengh 50?
Thanks in advance
SivanandIsn't this the same question as here:
Hi all, Have a problem, Please let me know urgently.
Why the duplicate postings with different names?? -
Labview How to specify 1d array of clusters as data types for variant to data
Hi, I'm new to labview. Can anyone tell me how to specify 1d array of clusters as data types for variant to data?
First of all, you should be sure that there is such a data type within the variant; otherwise, you will run into errors.
I recommend you to create the cluster and create a type definition from it. Then drop an array shell from the array palette and drop the cluster type into that array.
Connect that constant to the data type input of the Variant To Data function.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Urgent help: how to create data source for Weblogic T3 driver
Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhatHi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat -
How Create New Folder in KM with Name having Special Character
Hi,
How to create new Folder in KM with name having special character in it.
Right now its not allowing me to create folder when i have Colon( as one of the character in name of the folder.
Is there a way to change this validate?
Any help is appriciated.
ThanksHi DK,
I'm not sure about special chars such as ":" but ifyou need to have your folders displaying special language chars (like german chars), have a look into the below link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30deb229-d570-2910-4aaf-8858e0660f05
Hope that helps.
Ray -
Problem in Creating Data type strcuture for Proxies.
Hello gurus
My scenario is to send data from ECC system to SRM system through proxies. we have to fetch's data from source system and post the data to target system through XI.
Because of massive data coming from source system, I am going for proxy to proxy scenario. What I do not understand is the Data type’s structure.
This is the structure of Data type for sender end
Can anyone help me to create the data type for the Receiver end(SRM).
Thanks in advance.
Regards
karanhello sir
I have done the config in ESR as-
Data type, message type, service interface, message mapping, operational mapping as well.
while transportation, the data filled in sender is shown in receiver side also.
sir, i need to know now that do we have to do the configuration in IR as well as
Receiver determination, Interface determination. sender agreement, receiver agreement as well .
because ther's no XML created when in go to transaction SXMB_MONI.
help?
Thanks
Regards
karan -
How to create output type for GR,GI?
Can any one explain,How to create output type for Goods Receipt,Goods Issue.?
and How to take print out for both?Hi, jayant in standard u have output type for picking list, delivery doc complete, theres no output type seperately for PGI or PGR
I am sure u need the help of tech guy to create the new output type for ur requirement
regards
giri
Maybe you are looking for
-
hey guys, I was working on some Socket programming assignment and encountered an intersting problem. i am using Swing for GUI and Threads to communicate with clients. My server GUi has a JButton("Start Server") to trigger the Server. or we can say..
-
How to add repeating comments features in Sharepoint Announcement List.
I have a challange to add commenting features in Announcement lists identical to sharepoint blogs. When super user adds Announcement in the team page, i wanna display add comments right underneath the new announcement to people with contributer ac
-
Greetings. I have two TrueType fonts I'm trying to display in my java application. Both fonts have been "installed" on my Windows machine, one of them works just find (I can see Graphics.drawString("A", ...) and the corresponding A symbol is displaye
-
I got no buttom for "warning message" under security tab. /Stefan
Hallo! I got no button for -warning message- under Security in Firefox 35.0.1
-
Hey i just changed my user name and my email on the ipod and computer. So when i did the sinc i lost all my old apps and im asking how can i get my old user names apps on my new one?