How create report at runtime

hi master
sir my director give me task that my user selet column in form and push button then create report that have only selected column only
please give me idea how i create runtime report
thank's
aamir

You may create report with all possible columns, and suppress the columns based on user selections. Columns should be tied with anchors to avoid gaps when columns suppressed.

Similar Messages

How create report server in Application Server

Hi
1. i have installed 2 AS on same system with different NLS_LANG settings.
(English & ARABIC) my report are running through the Report server for ARABIC NLS_LANG to display proper arabic font and direction.Now My Arabic Report Server is corrupted so i want to create new report server inside that AS?
2. Can i delete Report Server from AS?
3. Can i change report server name in AS?
thanx
Najeeb
Message was edited by:
Najeeb ur Rehman

Hi
Thanx for reply
actually i have installed 2 AS on same system with different NLS_LANG settings.
(English & Urdu) my report server for arabic AS is corrupted so i want to create new report server inside that AS.
how can i do this
this statement 'rwserver -install rep_server autostart=yes' will create report server in my developer suit not in AS.
Message was edited by:
Najeeb ur Rehman

How create report with data from table and some columns results function ?

Hi,
How can i create on apex report region with some columns (of the report) as returned from a table and the other columns as results of plsql functions ?
for example , I want to create a report like that:
device last_date error_msg stop/start
kodak1 06/04/08 null >>
kodak2 08/03/08 good msg --^--
kodak3 08/04/08 err msg >>
3 rows returned
where the 3 first columns are data returned from the table and the forth column is the result of plsql function (returned for example false) and on that i want to display a button of start ( >> in this example ) or stop ( --^-- in this example)

Thomas,
There is no problem here -- this is fully suported scenario.
1. Bind Table dataSource to Customers node.
2. Bind individual cell editors to any attribute of customer or any nested node like Address, say create column with InputField as editor, then for "value" property select Customer.Address.Street.
Your nested nodes (like Address) must be non-singleton, set singleton=false on context designer tab.
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

How to create reports and infosets in E recruiting

Hi we are planning to create reports and infosets in E recruiting module Though I am not a developer I need to write functional designs for creating reports and Infosets.For the same I need to know what should be our approach and what all things we should keep in mind.and how creating reports and infosets is different from the ones in SAP R/3.
Thanks and best regards
Rajeev

I am sorry but your question does not seem to make much sense.
Can you please rephrase your question?

How can I create a Forms9i Runtime for client distribution

Currently we have an application developed in Forms 5.0.6.8.0 our Database has been upgraded to 9i DB. The application is working fine with this combination but we want to upgrade Forms in order to get Oracle Support. We just get the Developer Suite 9i package and we're trying to test our application with this software.
How can I create the client runtime for Forms 9i?
My application will work with Win 95 and 98?
Thanks.

Oracle9i Forms is web-only. Forms 6i is the last release of Forms to have client/server and character mode.
You can test Forms from the Builder by installing iDS. To deploy Forms using iAS follow the documentation. It's all there in the deployment guide.
iAS and Forms doco can be found on OTN.
Regards,
Robin Zimmermann
Forms Product Management

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Need advice on how to create report

I'm not sure how to do this, so I'm asking advice from the apex gods...
here is the issue, I have two tables that I need to combine info from. not an issue in its self. I can do that. but here is the issue. in Table A I have some data like disc_id, title, theids, etc.. Table B contains fullname, theid, emplid
now in table A the column 'theids' is populated from apex as a multi select list. so the values in the column is something like 48;3;88
it got these id numbers from the Table B query (lov popup) that returns theid of the person chosen.
now I have to create a report that will be used in a excel download and what they want is one line per disc_id and they want the more useful 'emplid' in the field where 'theids' are at. that is instead of :
disc_id Title theids
101 Test 48;3;88
they want:
disc_id Title Theids
101 test N33456,N3457,N43562
so I'm kind of stuck, I can figure out how to write a sql using instr to get something like this:
101 test N33456
101 test N3457
etc
but that is not what they want. so I'm thinking I need to create a package to do this and return some sort of values. the problem is I can't figure out how I can substitute the 48;3;88 for N33456,N3457,N43562
I'm still new at this pl/sql and apex stuff so sorry if this seems to have some obvious answer.

I might be dense so forgive me on this, but I don't think that will solve it.
your example uses field from apex, like :P3_SOME _VALUE
this report screen has no fields. there are no :P#_ type values to pull. I'm writing a report screen using a report template.
all the data I need for the report exists within the table. I just need to display it the way they want.
I could do just a:
select *
from my_table
and it would create the report just fine. the only issue is one of the columns would have 48:3:88 in the field. which to a person reading the report means little. so i have no apex fields to pull.
I was trying to write a pl/sql function that would substitute those delimited values with meaningful data. but when I do I get multiple rows and I can't have that. so my choices so far I see are..
1) create the report with a simple select leaving the data as is
2) create report that has multiple rows of data where each instr value now has the correct names (some have 2 some have 5, big list to read of dups)
3) create a package that populates a temporary table with the data I need then select on that table to get the report.
right now I'm thinking #3 is the only way to get what I want. By the way your examples would be a great help in doing that I can already see that I can use some of them to create a temp table with that data.
what I was hoping for was some option that I don't understand or missed that a more experienced person would know. but its looking grim.
I thank you all the info you have given, its been a great deal of info that I can use at some point, but so far I don't think it will solve my issue.

How to create report in the following form?

Hi All,
how I am using FR studio for creating reports.
I want to create a report which will show me accounts per entity,which means I want to keep the entity in the page dimension and accounts in the row dimension.The report should be done in such way that if I am taking one entity in page dimension then it will show some accounts in the row dimension which
are specific for that entity and in the similar way if I am taking another entity in page dimension then it should show me another different set of accounts in
the row dimension for that specific entity.
How can I achieve this in my report?
Thanks

Hi,
Your requirement is to create a report which has correct combinations of Entity and Accounts.
First step will be to create this account-entity mapping list. If you are not using the BegBalance member for storing your data, you could enter 0 value in Begbalance of each valid entity - account combination. Thus you have the valid accounts for the entity, that have data in Begbalance. You would capture data against these combinations only in the Planning data forms as well.
In the report, you will hide this Begbalance column, while showing other Period columns and select "Suppress Missing Rows/blocks" in rows.
Thus the report will only show valid accounts for the entity selected while running the report.
Let me know if it helps.
Cheers
RS

How to create variables at runtime

Hi,
I need to know how can i create variables at runtime.
or is their anything like array that we create in 'C' if yes . how can i define its size at runtime.
Thanks,
Dev.

In forms, either record groups or pl/sql tables of records give similar functionality to an array. You have full programatic control of either but with completely different syntax. Record groups integrate well with certain forms built-ins and features (eg LOVs and Tree items). PL/sql tables integrate well with other pl/sql such as stored procedures. Unlike an array, a pl/sql table may be SPARSE (index numbers need not be sequential), and UNBOUNDED (no need to declare the number of rows).

How to create report writer in sap?

Hi Anybody,
I want to create new report writer for finance report for ex: (p & L or balance sheet), i don't know how to create report writer in sap.
anybody please tell me with example?
Thanks
Regards,
S.Muthu.
IT Dept.

https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=createreportwriter&adv=false&sortby=cm_rnd_rankvalue

How to create Report BI 7

Hi All,
Could you please explain, how to create reports different ways and different object.
Ex:- 1. CKF and RKF
       2. Variables ( Characteristic, Formula and Text Variables )
       3. Structures and cells
       4. Exceptions and Conditions
      5. Processing types and details
Please provide every objects one examples, how to create flexible in reports in BI 7.0.
Thanks & Regards,
Vijaay.

Hi Vijay,
Go through the below SAP Help. Everything has been explained there:
[http://help.sap.com/saphelp_nw04/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm]
Regards,
Pratap Sone

How create header with user id time date to VC-report's output as display ?

How create header with user id time date to VC-report's output as display ?
This info should come from the VC - not all the way from R3-side via FunctionModule/BABI. So only userid, date, time to output as normal text (which is not editable of course). Thanks =)

Hi ann-mari
Go through following link may it help u
Form Item disabled based on portal role
/people/community.user/blog/2007/01/17/visual-composer-explorations-using-portal-roles-to-influence-ui-element-behavior
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/usingrolestoinfluenceapplication&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/passingvaluesvia+URL&
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1
Best Regards
````Satish````

How to create report image like artwork demo

Dear Pakars
How to create report image like artwork demo ?
Thanks
Imansyah

Hello,
Are you asking how to include images in a report? If so, take a look at the declarative blob support documentation -
http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

How to create report using Procedure.

Hi All,
I want to create report in apex.But i do not have sql code.I have one procedure.Is it possible to create report using this procedure in apex.
CREATE OR REPLACE PROCEDURE headcsv_prc2
AS
   CURSOR cr_header
   IS
      SELECT ood.organization_code, fm.formula_no AS "FORMULA_NAME",
               fm.formula_vers AS "FORMULA_VERSION",
               fm.formula_desc1 AS "FORMULA_DESC",
               DECODE (fm.formula_status,
                       100, 'New',
                       400, 'Approve for Laboratory Use',
                       700, 'Approve for General',
                       800, 'On Hold',
                       900, 'Frozen',
                       1000, 'Obsolete/Archived'
                      ) AS "FORMULA_STATUS",
               DECODE (fd.line_type, '1', msib.segment1) product,
               DECODE (fd.line_type, '-1', msib.segment1) ingrediant,
               DECODE (fd.line_type, '2', msib.segment1) AS "BY_PRODUCT",
               DECODE (by_product_type,
                       'W', 'Waste',
                       'R', 'Rework',
                       'Y', 'Yield',
                       'S', 'Sample',
                       NULL
                      ) AS "BY_PRODUCT_TYPE"
          FROM org_organization_definitions ood,
               fm_form_mst fm,
               fm_matl_dtl fd,
               mtl_system_items_b msib
         WHERE ood.organization_id = fm.owner_organization_id
           AND fm.owner_organization_id = msib.organization_id
           AND msib.organization_id = fd.organization_id
           AND fd.organization_id = ood.organization_id
           AND fm.formula_id = fd.formula_id
           AND msib.inventory_item_id = fd.inventory_item_id
           -- and fm.FORMULA_NO like'%TEA%'
           AND fd.line_type IN ('1', '2', '-1')
      GROUP BY ood.organization_code,
               fm.formula_no,
               fm.formula_vers,
               fm.formula_desc1,
               fm.formula_status,
               fd.line_type,
               msib.segment1,
               by_product_type
      ORDER BY fm.formula_no, fm.formula_vers;
BEGIN
   DBMS_OUTPUT.put_line (   INITCAP ('ORGANIZATION CODE')
                         || ','
                         || INITCAP ('FORMULA NAME')
                         || ','
                         || INITCAP ('FORMULA VERSION')
                         || ','
                         || INITCAP ('FORMULA DESC')
                         || ','
                         || INITCAP ('FORMULA STATUS')
                         || ','
                         || INITCAP ('PRODUCT')
                         || ','
                         || INITCAP ('INGREDIANT')
                         || ','
                         || INITCAP ('BY PRODUCT')
                         || ','
                         || INITCAP ('BY PRODUCT TYPE')
   FOR ch IN cr_header
   LOOP
      DBMS_OUTPUT.put_line (   ch.organization_code
                            || ','
                            || ch.formula_name
                            || ','
                            || ch.formula_version
                            || ','
                            || '"'
                            || ch.formula_desc
                            || '"'
                            || ','
                            || ch.formula_status
                            || ','
                            || ch.product
                            || ','
                            || ch.ingrediant
                            || ','
                            || ch.by_product
                            || ','
                            || ch.by_product_type
   END LOOP;
EXCEPTION
   WHEN OTHERS
   THEN
      DBMS_OUTPUT.put_line ('Error No: ' || SQLCODE || 'Error Msg: '
                            || SQLERRM
END;
EXEC HeadCSV_Prc2
Thanks,
Raghu

RaghuVarma wrote:
I created one report using sql code.(Ex: select * from emp).
But my higher authorities want that for security purpose They will change the code into java.
What "higher authorities"? What "security purpose"?
In this process they changed my code as a procedure.Finally they give that java code.they tell to me please fix in apex.
Do these "higher authorities" know anything about APEX? What does the Java code actually do? Have you asked them how their approach is to be integrated into APEX?
There is no reason why a properly written Java stored program cannot be used in APEX, provided that whatever it is doing makes sense in an APEX/web context, and isn't some nonsense like using DBMS_OUTPUT to generate a CSV.
I tried so many ways.But it is not fixed.Different Different errors will occurs.
Tried what? Demonstrate what you have tried, preferably using examples on apex.oracle.com.
How to solve this.
How to solve what? No clearly defined problem or requirement has been identified.
Describe the the problem/requirement (not your attempted solutions) in detail.
How to ask questions
Re: 2. How do I ask a question on the forums?
Include as much relevant information with your question as possible, starting with:
APEX version
DB version, edition and host OS
Web server architecture (EPG, OHS or APEX listener), platform, and host OS
Browser(s)/version(s) used
Theme
Templates
Region type(s)

Determine version used to create a report at runtime?

Is there a way to determine what version of Crystal was used to create a report during runtime? I've looked at the objects and cannot find a property that might be used. There is a File Forrmat Schema property in the Report Definition item in the Performance Information Menu option in the designer that might be useful, but can't find a way to get in in the object model. Any ideas would be appreciated.

Directly off of the ReportClientDocument class there is a MajorVersion and MinorVersion property that contains this information.

How create report at runtime

Similar Messages

Maybe you are looking for