How do I access folders in iCloud Drive when in Keynote, Pages or Numbers?

I have upgraded my iOS to 8 and Mavericks to Yosemite beta. I created folders in Finder (under iCloud Drive) and can see them in the web apps in iCloud. However, files that I moved to those new folders are nowhere to be found on the iPad or iPhone. I have noted that as long as I keep them in the default folders that transferred over, they do show up. But, this is counter productive as I would like to be able to better organize my folders and files. Is this something that Apple will eventually figure out or will it always be steps behind. I really like iWork (save for Numbers, perhaps) and would use it more often if these simple things could get worked. out.

I'm having the same problem bpay14, but with a CalDigit VR2 6TB RAID0 external hard drive.
One day it was showing on my desktop, the other it wasn't. And I still didn't update my Mavericks to 10.9.3 (still with the 10.9.2).
It shows up in the disk utility, and I can even Verify the disk and Repair it (but I don't wanna start repairing
something that probably doesn't need to be repaired, so I haven't clicked the Repaid button, only the Verify button) and it says its working just fine.
But it doesn't show in the Finder or the desktop for that matter.
And even if I force disconnect the cable, I get the usual "this disk was not ejected properly" notification
presumingly the disk was mounted on the desktop and I forced eject by unppluging it...
I found a way to force open the disk, through Disk Utility that's by clicking with the right mouse button
on the disk icon, and chosing OPEN "CalDigit AFRICA 6TB"... (see picture 1)
But... after that, it open a Finder window showing all my internal and external drives, but that drive's
name is in washed grey, like if it was unmounted (see picture 2).
When selected, I can see everything and work normally on the harddrive, even opening FCPROX projects or Libraries, copying from it and writing documents into it... just normal... (see picture 3)
BUT IT DOES NOT SHOW IN THE DESKTOP...
that's my problem...
I even did a Command+i for Info on the hard drive. (see picture 4)
Can anyone shed some light on this issue?
I would be eternally grateful!
Thanks in advance!!!
Cheers!

Similar Messages

  • How to I access documents in icloud drive from my iPad

    I set up an icloud drive on my PC and stored my document.  i have icloud set up on my iPad and iPhone.  I can seem to figure out how to access those documents from the iPad or iPhone.  I thought there might be an icloud app for access, but no.
    Any help out there?

    Sorry, I do not think rereading is any good. The fact is: I do not see what I "should" see.
    I have checked that both on IOS and Mac I use the same icloud account, both have iCloud Drive enabled. On the Mac I have e.g. a custom folder "History"
    On IOS, in Documents 5 by Readdle, after tapping icloud in the sidebar and then the iCloud Drive text, I see this: (in list view, alphabetically arranged):
    So, my "History" folder does not show up at the "H" and not at the end.
    I thinks there is still a fair bit of iCloud related "should's" that do not materialize in practice.
    For example, this same History folder is 1.11 GB in size, and when I added it a few months ago, not all files were synchronized (I checked after a week!).
    You never get a positive signal that all files have been uploaded. Thus far, iCloud leaves me with that same shaky iDisk feeling of 2007!

  • How to create new folders on iCloud Drive from iOS or with document picker?

    Recently I wanted to share several files from my iWorks suite with my colleagues. I do not want them to edit these files, instead I made templates in Numbers for easier management of hours worked. Everyone could download their copy and keep a track of their hours themselves. The problem is, not everyone has an Apple product.
    Unfortunately, iOS does not support native browsing of iCloud Drive (except the document picker, which, to me, isn't helpful at all), the only way I know of - to create a new folder - is to open iCloud.com in Safari, request the desktop site and make a new folder from there.
    Is there another way of creating new folders, preferably an official app from Apple or from within an iWorks app or the document picker that I do not know of? Or is this actually a missing feature?
    Also, if Apple could make an app similar to Microsoft OneDrive, that would be great.

    Yes, there is a way. Here is the workaround. You can add notes folders directly with your iPad or iPhone.
    http://keeplifesimple.weebly.com/1/post/2013/11/add-folders-to-native-notes-app- on-ios.html
    Enjoy! Please pass it on, leave a comment on the page, or "like us" on Facebook if you find this information helpful.

  • How can I open files in folders on iCloud Drive on my iOS8 device?

    Have created folders and moved parts of my documents and pdf files to iCloud Drive on my MAC (Yosemite).
    I can see the folders on my iOS device in Manage my iCloud, I can delete the folders and documents but HOW can I open the documents?
    On Apples homepage I can see a simliar layout as when I log in to iCloud.com with my folders etc. plus the Apple Pages folders.
    But where on my iPad / iPhone do I navigate to find the same?
    Tried to login to iCloud.com on Safari on my iPad but it did not show my folders/files on iCloud Drive.

    So what is the point of upgrading to iCloud Drive when there is no "Drive" on your iOs 8 device? I also added a new folder through Safari on desktop- as instructed by Apple- and I have no way of accessing it on the iPhone! This seems pretty bogus and a huge waste of time!
    And... If Apple was developing an app for the "Drive" why have us upgrade to something you have no way of using?
    And... I did try opening files through apps that allow it but I do not see anything.
    And... Pages docs do NOT show in the "Drive" on Safari.
    WHY?

  • How can I access documents from iCloud on my iPad.

    how can I download docs from icloud drive on my iPad and edit them on ipad.

    Hello Kalsulkar,
    To use iCloud Drive and to work with documents, you will need the corresponding Pages, Keynote and Numbers iOS apps or third party iOS apps that support iCloud Drive to interact with those documents. To access the content, you would need to open one of those apps to see all the documents that are available to you for that specific app. Take a look at the article below for more information. 
    iCloud Drive FAQ
    http://support.apple.com/en-us/HT201104
    Regards,
    -Norm G. 

  • The folders under iCloud Drive are not being uploaded to iCloud

    I seem to read similar problem reports in this group but I want to make sure that indeed it is the same problem I am having. I moved all my folders to iCloud Drive some weeks ago and they were being uploaded to the cloud since then. In total I have 150 gigabytes of folders and about 100 are uploaded to the cloud which I can see in the settings of iCloud under system preferences. I realise that during the last week nothing is being uploaded anymore. There is still about 50 gigabyte of files that need to be uploaded automatically but nothing happens. I do not understand how the upload process works. What determines when the upload takes place? What determines how much of my files will be uploaded today and then the next day: because sometimes the upload used to take place the whole day while at other days only for a few hours. I definitely need a clarification here. Could some please respond? 

    If you're talking about photo stream:
    Check the following:
    From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.  If grayed out, check Restrictions in Settings>General.
    From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
    Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
    Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
    Note that when photo stream is turned on, only pictures taken from that point on will go to the stream, not existing photos.  For those, sync them to a computer using itunes and USB cable.

  • How do I access my airport extreme drives online

    how do I access my airport extreme drives over the internet?

    Here are the basic steps to share an AirPort Disk over the Internet.
    Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn,) and then, note the IP address shown.
    Select Manual Setup.
    Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
    Select Disks, and then, select File Sharing.
    Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
    Verify that Secure Shared Disks = With a disk password. (Recommended)
    Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
    Select Advanced, and then, select the Port Mapping tab.
    Click the plus sign to add a new port mapping.
    For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
    In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
    In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
    Click on Update.
    To connect to the shared AirPort Disk from a remote location using a Mac:
    From the Finder > Go > Connect to Server.
    Enter the DynDNS-provided Domain Name or Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
    Click Connect.
    You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
    Click Connect.

  • How can I access my parents iCloud account remotely to assist with photo management and printing?

    How can I access my parents iCloud account remotely to assist with photo management and printing?

    I tried that without any luck. I was hoping I could get Apple to reset it for me or delete the account so I could recreate it or at least tell me what is listed as my birth date, the security question answer.

  • How can I share photos on iCloud Drive?

    I have a lot of photos shot with my DSLR camera.
    How can I put all my photos in the iCloud Drive and view the photos from all my devices? And how can my wife view all these photos from her devices - that is .. how can she see all my iCloud Drive photos on her devices?
    Thanks!
    Mojo

    I'm not sure understand you at this point.....
    Have you set up a "shared photo stream" to share your photos with your wife? [System Preferences -> iCloud .. then check the box next to  "Photos" and click on "Options" to the immediate right.... in the Options drop down make sure "iCloud Photo Sharing" is checked...
    Then open iPhoto - select in the sidebar the album you want to share (if you only want to share individual photos select these in the main window)
    Then click on the "Share" icon on the lower right of the iPhoto window - a little menu with icons will popup. Click on the iCloud icon in that menu... the next menu that pops up should be titled "Share"
    Click on the first item (New Photo Stream --the one with the "+" sign) and create a "shared album" - a drop down window will appear at the top of iPhoto... just fill out the form (whom you want to share it with, the name of the shared album, etc. - if you want your wife to be able to add photos to the shared album, check off the box that says "Subscribers can post"
    Your wife will have to agree to "subscribe" to this shared item (she will get "invite on her device - ) - once it is set up to see the shared photos in iPhoto click on "iCloud" in the sidebar under "Shared" and it will show you any shared albums in addition to your own Photo Stream...  on devices, to see the shared album, open the Photos app... at the bottom one of your choices will be "shared" (a cloud icon) - touch that icon and you will get a list of all your shared iCloud albums as well as "activity"...
    No need to "export" anything manual, etc.

  • How to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

    how to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

    Set up the new phone as a new iPhone (without using your backup), then update it to the latest iOS (7.1.2).  Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens again and when given the option, choose Restore from iCloud Backup and follow the prompts.  This process is explained in more detail here: iCloud: Restore your iOS device from iCloud.

  • How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

    How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
    I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder.  I would like to be able to keyboard navigate to it in an efficient manner.  I tried to use the "Go to the folder" feature but was unable to.
    I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
    I hope I explained the question well.  Thank you for all of your help and time in tending to my inquiry.

    Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

  • How do I access new second hard drive?

    Hi! I am newbie, I am sorry if this a dumb question...
    How do I access my second hard drive?
    This is what I have:
    SparcStation5 170Mhz, 192MB memory.2HDD (one 4.3GB w/ OS, second Hdd 4.3GB)
    I had my sparc working with Solaris 8 just perfect!
    I added the second hard drive, no problems, I formatted the HDD from withing Solaris OS, (I can probe-scsi from openBoot promt and it showes OK), everything is OK so far, I can see the send hard drive using format, I can partition it and create slices on it, everything seems to be OK, I have no problems making partitions and everything on that Hdd. But when I try 'ls', I can't see anything on that disk, any suggestions? I tried several ways from my manual/book, including mount and it reads 'no acces point on mount' or somthing like that.
    this is what I see from format command:
    disk 0. (seegate 4.3GB.....) this is my new hard drive (already formated and partioned, I created a new partition /usr with 3.75GB on partition 6. Partition 3 is used by the hdd with a totoal of 4GB . this shows as c0t1d0
    disk 1. (SUN4.2GB) this is the hard drive with the OS Solaris 8. this is c0t3d0
    Am I missing something?
    Thanks!
    Murillo

    hi there ...
    read below--
    Find out the address of the drive
    STOP+A
    At the OK prompt, type probe-scsi. This will list all scsi devices on the system. Find the new drive.
    Type boot -r so the OS will see the new drive.
    Login as root and type format. Pick the new drive. The drives are listed as c(controller #)t(scsi id or target #)d(disk #). Label drive is required (it will tell you if the drive is not labeled).
    Next, type partition. Partition the drive as required (always leave partition 2 as the whole drive as it is informational to the OS
    Type print to list the current partitions. When you are done making changes type label
    To return to the OS prompt, type quit twice
    newfs /dev/dsk/DRIVE-ADDRESS
    (ie c0t1d0s0) (controller 0 target(ID) 1 disk 0 slice(partition) 0).
    mkdir directory, where directory is the directory you want to mount the drive on
    (ie, /disk2)
    mount /dev/dsk/DRIVE-ADDRESS directory
    Add the new drive to your /etc/vfstab file.
    (ie. /dev/dsk/c0t1d0s0 /dev/rdsk/c0t1d0s0 /disk2 ufs 1 yes - )

  • How do you access folders/files in other users Finder list?

    How do you access folders in other users finder list, once you have shared the folder or file

    You should be able to open and view the contents of any directories you have access permissions to using FInder, by navigating the directory tree to the folders in question and opening them as you would your own folders. If you know the full path-name of the directory, you can enter it into the Finder navigator opened by Apple-Shift-G; the dialog that pops up uses the same directory listing method as all unix systems, and has tab completion for ease of use. In general, all users have their home directories in /Users/, or you can simply use ~/../<name> to go to the home folder of a user via the parent (..) directory of your home (~) directory. If you are experiencing bugs or errors with this, as opposed to simply not knowing how to do this, please post any details of your experience so that others can help troubleshoot your problems.

  • How can I access xml document from javascript whithin a JSP page

    how can I access xml document from javascript whithin a JSP page?
    I have a JSP that receives an XML document from a JavaBean, so I can access it within the entire JSP, but I need to access it from the javascript inside the JSP... and I have no idea how i can do this.
    Thanks in advance!

    The solution would only work on MS IE browsers, as other browsers do not support an XML DOM.
    It can be done, but you would be stuck with using the Microsoft broswer. If that is acceptable, I have some example code, and a book recommendation.

  • ICloud Drive doesn't show up my Numbers folder on my new macbook pro.. what to do?

    iCloud Drive doesn't show up my Numbers folder on my new macbook pro.. what to do?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Maybe you are looking for

  • How to find maximum number of users we can assign for Hyperion Planning.

    HI, How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1. In Essbase propreties, the system is showing maximum planning users could be 65535. what would be the number fo

  • Learning Java proxies - landscape question

    Hi guys, I could use a little help to learn Java Proxies, I'm just starting to get familiar with Java, I'm coming from the ABAP side. First and foremost what do I need from the system point view? We have an XI box and using file/FTP/IDoc adapters and

  • Server does not support PLAIN or LOGIN authentication

    I try to send mail via XI Mail adapter. My settings are below Transport protocol : SMTP Message protocol : XIPAYLOAD url : smtp://10.44... Authentication Method : Plain User : ... Password... From : To : .... But i give this error   "server does not

  • Bug or feature: TableView sorts the underlying list?

    that's at least highly unexpected - all variants of table sorting I know, support some kind of sortedView on top of the user model (either by a framework outside of the table, as GlazedList, or internal as core swing). Is it a not-yet-done feature or

  • Maximum number of attributes in a session?

    Is there a limit to the number of attributes that can be placed in an httpsession? I can place 8 unique attributes before i get a servlet error and a nullpointer exception using Tomcat and the latest jdk.