How do I calculate the max latency of a PXI 8135 (controller) to PXI 6528 (DIO) output?

We are using a PXIe- 8135 Controller and a PXI-6528 DIO module in a PXIe-1082 chassis. We are sending DIO input and output commands using Powershell in Windows 7 on the controller. Due to tight requirements I need to know what is the max latency from when the Powershell command is issued to when the read input or write output command will take place in the DIO I/Os.
If this should be in a different Community Board Location please let me know.
Thanks for the help in advance,
Dan_F

Hello dan_f,
As the latency of Powershell and Windows are not tested, it is hard to determine the latency of your setup. The latency from the PXIe-8135 to the PXI-6528 should be in the realm of nanoseconds. The PXI-6528 does have a couple of latency numbers that can be found within the user manual on Page 24, and they are as follows:
Minimum pulse-width for change detection - 150 µs
Propagation delay - 65 µs, typical
You may be able to do some testing to ballpark the latency of the controller OS/software side of the input/output commands, but depending on how critical this latency is to your measurements, you may want to look into using a real-time OS instead.
Chris H
Applications Engineer
National Instruments

Similar Messages

Calculate the max and sum value by weird way !!!

this code calculate the sum value without sum clause :-
DECLARE
x NUMBER;
y NUMBER := 0;
CURSOR cur_sal
IS
SELECT sal
FROM emp;
BEGIN
OPEN cur_sal;
LOOP
FETCH cur_sal
INTO x;
EXIT WHEN cur_sal%NOTFOUND;
y := y + x;
END LOOP;
CLOSE cur_sal;
DBMS_OUTPUT.put_line ('sum sal without using sum function = ' || y);
END;
and this code calculate the max value without max clause :-
DECLARE
x NUMBER;
y NUMBER := 0;
CURSOR cur_sal
IS
SELECT sal
FROM emp;
BEGIN
OPEN cur_sal;
LOOP
FETCH cur_sal
INTO x;
EXIT WHEN cur_sal%NOTFOUND;
IF (x > y)
THEN
y := x;
END IF;
END LOOP;
CLOSE cur_sal;
DBMS_OUTPUT.put_line ('max sal without using max function = ' || y);
END;
the Question is : how suppose that's happen ?
what's the secret in those codes ?
it's just new idea for me , but I don't understand !
is there any name for this way in ( Oracle® Database PL/SQL User's Guide and Reference ) ?
if not , so please anyone give me any help to understand those codes !

Secret? What secret? It slowly and inefficiently fetch each row one at a time and consecutively add them together you get a sum. What the first, horribly inefficient, cursor loop is doing is roughly the equivalent of determining how many rivets are in a bucket by dumping them on the floor and picking them up one at a time rather than weighing one, weighing all, and then doing a simple division. The second loop does the same, horribly inefficient thing, by picking up each rivet and seeing if it is bigger than the previous one.
Cursor loops are obsolete and this code is about as inefficient as you can get without using an Excel macro.

How can i get the max rpm from cpu fan??

how can i get the max rpm from my cpu cooler regarding that i don't have a speed controller attached to the cpu fan ,,, ?? please make things clear for me
thanks

if you have not reduced it by using a speed controller either hardware or software or by the 7v mod its already going as fast as it will at 12 v dc you cannot speed it up only slow it down
need more air get a different cooler/fan

How do I calculate the total size of selected folders?

Hello
My question is:
How do I calculate the total size of selected folders?
Thank you

It does show the aggregate size.
Command-Option-I opens the Inspector window. (Or open the File menu and hold the Option key. Get Info turns into Show Inspector.) The Inspector is similar to the Get Info window but it shows aggregate info for multiple selections. It is also dynamic — if you change the selection while the Inspector is open, the info changes to reflect the current selection.

How to find out the max/min value of one field corresponding to a second field in HANA through graphical way.

Hi,
I am trying to find out the latest delivery date(EINDT) for each purchasing document (EBELN) through graphical way.
The view contains other fields apart from the above mentioned two fields.
When only the two fields (EBELN, EINDT) are there, then in semantics, I can select 'Max' as aggregation to get the maximum value for each document.
If I do like this, then I need to join more than 3 views and also so many joins in calculation view. Taking so much time for data preview.
Hence , please help me in getting the solution while the view contains other fields also.
Thanks in advance.
Thanks,
Jyothirmayi

Hi Sreehari/Vinoth,
Thank you for your replies.
if only two fields are then I can get the max/min values of one field corresponding to other field.
But more than two fields are there with different values, then let me know how to find out the max/min value of a particular filed corresponding to the 2nd field with other fields also should be in the output.
I hope you understood my issue.Please revert in case of questions.
Thanks & Regards,
Jyothirmayi

How We can restrict the max no of Selections in JList

Hi,
How We can restrict the max. no of selections (at random selections) in JList (ex. max No of of selections is 3 in a JList of having 50 items.)
Thanks for your advise in advance.

Hello Satyaki De.
Thank you very much for your suggestion but my Private information is totally apart from this question & I already I have changed each and every information from the question.
Thanks
Kamlesh Gujarathi
[email protected]

How i can calculate the backplane speed & throughput of cisco 48 1G 2960S switch?

How i can calculate the backplane speed & throughput of cisco 48 1G 2960S switch?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Calculate? Calculate for wirespeed/line-rate? If the latter, take all the port bandwidths, and assuming they are duplex, double for necessary fabric bandwidth. I.e. 48 gig ports would need a 96 Gbps fabric. Take all your port bandwidths, and allow 1.448 Mpps per gig (for minimum size Ethernet packets), i.e. 48 gig ports would need 69.5 Mpps. Once you have required fabric bandwidth and PPS, you can compare to vendor's specs.

How can I calculate the request time ?

Hello,
How can I calculate the total consume time in each request ?
For example, I want to start calculating the time when I click on a Link or a button and the end time when it completed load the page !
Eric

You could use a filter like this one:
import java.io.*;
import java.net.*;
import java.util.*;
import java.text.*;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletContext;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
public class TimeFilter implements Filter {
    // The filter configuration object we are associated with. If
    // this value is null, this filter instance is not currently
    // configured.
    private FilterConfig filterConfig = null;
    private static final boolean debug = false;
    private long start = 0;
    private long end = 0;
    public TimeFilter() {
    private void doBeforeProcessing(ServletRequest request, ServletResponse response)
    throws IOException, ServletException {
        if (debug) log("CalendarFilter:DoBeforeProcessing");
        System.out.print("In Filter ");
        this.start = System.currentTimeMillis();
        System.out.println((new java.util.Date()).toString() +
                           " start request ");
    private void doAfterProcessing(ServletRequest request, ServletResponse response)
    throws IOException, ServletException {
        if (debug) log("TimeFilter:DoAfterProcessing");
        System.out.println("Completion Time = " + (System.currentTimeMillis() - start));
     * @param request The servlet request we are processing
     * @param result The servlet response we are creating
     * @param chain The filter chain we are processing
     * @exception IOException if an input/output error occurs
     * @exception ServletException if a servlet error occurs
    public void doFilter(ServletRequest request, ServletResponse response,
    FilterChain chain)
    throws IOException, ServletException {
        if (debug) log("TimeFilter:doFilter()");
        doBeforeProcessing(request, response);
        Throwable problem = null;
        try {
            chain.doFilter(request, response);
        catch(Throwable t) {
            problem = t;
            t.printStackTrace();
        doAfterProcessing(request, response);
        // If there was a problem, we want to rethrow it if it is
        // a known type, otherwise log it.
        if (problem != null) {
            if (problem instanceof ServletException) throw (ServletException)problem;
            if (problem instanceof IOException) throw (IOException)problem;
            sendProcessingError(problem, response);
     * Return the filter configuration object for this filter.
    public FilterConfig getFilterConfig() {
        return (this.filterConfig);
     * Set the filter configuration object for this filter.
     * @param filterConfig The filter configuration object
    public void setFilterConfig(FilterConfig filterConfig) {
        this.filterConfig = filterConfig;
     * Destroy method for this filter
    public void destroy() {
     * Init method for this filter
    public void init(FilterConfig filterConfig) {
        this.filterConfig = filterConfig;
        if (filterConfig != null) {
            if (debug) {
                log("TimeFilter:Initializing filter");
     * Return a String representation of this object.
    public String toString() {
        if (filterConfig == null) return ("TimeFilter()");
        StringBuffer sb = new StringBuffer("TimeFilter(");
        sb.append(filterConfig);
        sb.append(")");
        return (sb.toString());
    private void sendProcessingError(Throwable t, ServletResponse response) {
        String stackTrace = getStackTrace(t);
        if(stackTrace != null && !stackTrace.equals("")) {
            try {
                response.setContentType("text/html");
                PrintStream ps = new PrintStream(response.getOutputStream());
                PrintWriter pw = new PrintWriter(ps);
                pw.print("<html>\n<head>\n</head>\n<body>\n"); //NOI18N
                // PENDING! Localize this for next official release
                pw.print("<h1>The resource did not process correctly</h1>\n<pre>\n");
                pw.print(stackTrace);
                pw.print("</pre></body>\n</html>"); //NOI18N
                pw.close();
                ps.close();
                response.getOutputStream().close();;
            catch(Exception ex){ }
        else {
            try {
                PrintStream ps = new PrintStream(response.getOutputStream());
                t.printStackTrace(ps);
                ps.close();
                response.getOutputStream().close();;
            catch(Exception ex){ }
    public static String getStackTrace(Throwable t) {
        String stackTrace = null;
        try {
            StringWriter sw = new StringWriter();
            PrintWriter pw = new PrintWriter(sw);
            t.printStackTrace(pw);
            pw.close();
            sw.close();
            stackTrace = sw.getBuffer().toString();
        catch(Exception ex) {}
        return stackTrace;
    public void log(String msg) {
        filterConfig.getServletContext().log(msg);
}and in the web.xml :
   <filter>
        <filter-name>TimeFilter</filter-name>
        <filter-class>
            com.filter.TimeFilter
        </filter>
    <filter-mapping>
        <filter-name>TimeFilter</filter-name>
        <url-pattern>/services/*</url-pattern>
    </filter-mapping >

How can i calculate the average in java

how can i calculate the avergae mark out of two marks for instance in like exam mark out
of two other ones
thanks for considering this message

Average or Mean:
sum_of_N/N
Here N is the number of marks.
sum_of_N is the total sum of n(all marks added together)
public int average(int[] marks) {
int sum;
sum = 0;
for(int i=0;i < marks.length;i++) {
sum=marks[i]+sum; // keep adding to the total
return average = sum/marks.length;
// warning- using an int here can be a pitfall(we could have a decimal outcome).
}

I wanted to know how do you calculate the number of days between two dates

i wanted to know how do you calculate the number of days between two dates in java ? i get both the dates from the database. i guess there are many issues like leap year and Febuary having diff no of months ..etc.

thanks..
I solve my problem as
public class MyExample {
    public static void main(String a[]) {
        String stdate = "2009-03-01";
        java.sql.Date currentDate = new java.sql.Date(System.currentTimeMillis());
        java.sql.Date preDate = java.sql.Date.valueOf(stdate);
        System.out.println(currentDate);
        System.out.println(preDate);
//        int dateCom = preDate.compareTo(currentDate);
//        System.out.println(dateCom);
        long diff = currentDate.getTime() - preDate.getTime();
        int days = (int) Math.floor(diff / (24 * 60 * 60 * 1000));
         System.out.println(days);
}

How can I calculate the waveform integral in a defined time interval?

Hi:
I need your help. How can I calculate the waveform integral in a defined time interval? For example: from "0" to "2pi"?!
Thanks.

Hello Clecio,
You might want to try the Integral x(t) VI. The documentation for this VI notes:
Performs the discrete integration of the sampled signal X. Integral x(t) calculates a definite integral. The value of the output array at any value x is the area under the curve of the input array between 0 and x.
You would pass the samples of the waveform that fall between your particular window, then pass 1/number of samples for the d(t) parameter.
Hope that helps.
Wendy L
LabWindows/CVI Developer Newsletter - ni.com/cvinews

How do u calculate the subset of the cube in essbase?

how do u calculate the subset of the cube in essbase?
please suggest.........

Suggest you read - http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_dbag/dcadevcs.html#dcadevcs63536
Cheers
John
http://john-goodwin.blogspot.com/

How can I calculate the total time in java?

Hello!
I need to calculate the total time!
For example I have start time:
          Format formatter1;
          Date date1 = new Date();
          formatter1 = new SimpleDateFormat("hh:mm:ss");
          String startTime = formatter1.format(date1);
          //startTime = "14:20:40";
And I have finish time:
          Format formatter2;
          Date date2 = new Date();
          formatter2 = new SimpleDateFormat("hh:mm:ss");
          String finishTime = formatter2.format(date2);
          //finishTime = "08:30:55";
So, after manually calculating, I get total time: "18:10:15"
How can I calculate the total time in java? (Using formatter1 and formatter2 I suppose)
What I need is to print "total 18:10:15"
Thanks!

800512 wrote:
I did the following but, I think something is wrong here:
I defined before: Date date1 = new Date(); Date date2 = new Date();
And it should be exactly 5 seconds between them.
I found delta between date1 and date2:
Format formatter = new SimpleDateFormat("HH:mm:ss");
          long timeInMilliFromStart = date1.getTime() - date2.getTime() ;
          Date date3 = new Date(timeInMilliFromStart);
          String timeInSecFromStart = formatter.format(date3);
and I get always
//timeInSecFromStart = 02:00:05
But it should be exactly 00:00:05.
What can be a problem?Because, like I said, a Date measure an instant in time, not a duration. So when you have 5000 ms, and you turn that into a Date, that means 5 sec. after the epoch, which works out to 1/1/1970 00:00:05.000 GMT.
As I mentioned, if you're not currently in GMT, then you have to set the TZ of the DateFormat to GMT. Right now, it's showing you the time in your TZ. If you included the date in your SimpleDateFormat, you'd see either 1/1/1970 or 12/31/1969, depending on which TZ you're in.
Bottom line: You're trying to use these classes in a way they're not meant for, and while you can get the results you want for a limited set of inputs if you understand what these classes do and how to work with that, it's a brittle approach and comes with all kinds of caveats.

How do I calculate the Out_flags number for the PIPL?

Hey everyone!
I'm kinda new to After Effects programming, so I hope I'm not asking a too obvious question.
I've searched the web and this forum but just couldn't find a working solution for this problem.
Compiling my plug-in works properly, but as soon as I select it from the effects menu I'm presented with a mismatch error.
My question (as already asked in the title): How do I calculate the correct number for the pipl global_out_flags?
Thanks in advance,
Markus

You will probably get a faster answer here: After Effects SDK
The link is on the home page of the AE forum

How do i calculate the average of runs that have variable number of samples?

Hi
I am trying to calculate the average trajectory from lets say 4 runs, with varying sample size.
That is, if the the 4 runs have 78,74,73,55 samples respectively, How do I calculate the average of (78+74+73+55)/4 , (78+74+73)/3 and (78+74)/2 and 78/1 ?
Thank you

I'm not sure you gave a sufficient information. Assuming that you just want to calculate a linear average of the data collected in consecutive runs, you have two simple methods :
1/ concatenate the data before calculating the mean.
Simple, but can occupy a huhe amount of space since all the data have to be stored in memory
2/ store only the means Mi and the corresponding number of data points ni and calculate a balanced mean : M = sum (ni x Mi) / sum (ni) )
The attached vi illustrate both methods.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Averages.vi ‏40 KB

How do I calculate the max latency of a PXI 8135 (controlle​r) to PXI 6528 (DIO) output?

Similar Messages

Maybe you are looking for

How do I calculate the max latency of a PXI 8135 (controller) to PXI 6528 (DIO) output?