How do I change template designs once a form has been created using another template design?

I talked to a service Representative and he told me there isn't a function to change a form using one template to a different template. For example, I used template for "Accommodation registration" and wanted to change it to "admissions application." I was hoping I could just select a "Change template" rather than having to copy/paste everything to the new template. But that's what i had to do. Maybe the next version of this software will make it easier to change design templates.

Similar Messages

How can we change the structure after a Journal has been created??

Hi Experts,
                We have made an application and create a journal for it using the journal wizard.
But later on on the development, we need to change or modify the structure of the application.
so when we try to do it, the system prompt that we cant change the structure because it has journals.
so we use the clear journal function and try it again. It still give the same prompt.
                How can we deal with this problem?? we really need to change the structure.
Thanks,
Bennie Jay

Hi Shova V.
              I tried it and it worked!!! thanks!! although it doesn't work for the first time when i try to modify. if have to process it first for it to work.
              I just hope in the next version it shouldn't be manually done.
Thanks,
Benniejay

Once a form has been submitted, can it be "unsubmitted" to allow the submitter to make changes?

Once a form has been submitted, can it be "unsubmitted" to allow the submitter to make changes?

Hi,
Unfortunately, it is not possible to un-submit a response. However, user can submit a new response and incorrect/old response can be deleted by the moderator.
Regards,
Nakul

Can we change customer account name once a quote has been created ?

Can we change customer account name once a quote has been created ? Currently the customer account number becomes read only when the quote header has been created. This is true for both Forms Quoting and HTML Quoting.

Presently the feature of changing customer name for Quote is not supported.

How can I save a file in CS5 that has been created by a newer version?

How can I save a file in CS5 that has been created by a newer version?

Elaborate on what you are going to do.
Provide details.

How to uninstall Labview 8.5 once 8.6 has been installed

How do you uninstall Labview 8.5 once 8.6 has been installed with windows XP as the OS.

You should be able to remove the programs with 8.5 in the title from the Add/Remove Hardware sections. However, the recommended method would be to do a complete uninstall and then install 8.6 fresh. This will make sure you have the most complete and stable installation.
Will
Certified LabVIEW Architect, Certified Professional Instructor
Choose Movement Consulting
choose-mc.com

How to get the exact time when condition records has been created?

Hello All,
Can anyone thorw some light on - how to find the exact time on which a particular condition record has been created?
I have tried to get it from KONP {by inputting condition record number}, but unfortunately time is not tracked over there, but the date is tracked.
Await your valuable inputs on the same.
Regards,
Hrishi

Dear Hrishi,
Try with this
Go to display mode of the condition record through VK13 transaction from the condition record overview screen go to menu Environment >Changes>Click on Change report now system will take you to the Change Documents for conditions selection screen here you input proper selection data then execute now system will give the all the details here you can find the time also.
I hope this will help you,
Regards,
Murali.

Once a form has been signed with a digital signature, why can't you insert a bookmark?

We are using Adobe 9 on Windows XP, I'm not sure what the forms are created in.
I understand why you wouldn't allow a form to be changed once it's been signed digitally (because the person is attesting to the contents as they are when the person signed the form). I don't understand why we can't add bookmarks to pages in the form? The bookmark technically is a change but not a substantive change to the form. Is there a way to add links to places in the form after a digital signature has been created?

Hi Christic3,
This is a bit geeky, but here goes. Think of the PDF file in two layers (there are really more, but we'll keep it at two for simplicity). The bottom layer is the PDF content such as fonts, structure tags, and pages. The top layer is form data and comments (aka annotations). When you sign the PDF you sign everything (both layers), but the only allowable changes to the file are additions to the top layer. You can add form data and comments, but you cannot modify anything in the bottom layer without breaking existing signatures. In fact, you can't change (by change I mean modify or delete) anything on the top layer either, but you can add new (unsigned) items.
Bookmarks are part of the underlying PDF structure. Because they are as integral to the underlying structure as anything else, the ability to modify the bookmarks is locked after signing, otherwise it would be too easy to break the signature.
Steve

Importing modified Bug WIT does not refresh the template in TFS 2013 for the project created using Scrum Template.

Hi,
We have a TeamProjectA created in a collection using ScrumTemplate 2013.4. I have added a new State 'Duplicate' in the Bug WIT and modified the workflow. Also the ProcessConfiguration file is modified to match the metastate and imported using the ImportWit
Commands which were successful. When I Export the modified WIT using Process Editor for TeamProjectA I can see the Bug.xml has my changes. However, when I try to create a new Bug through TWA, I do not see the new State'Duplicate' that I added.
I dont see my changes are updated in the common configuration files Path ie C:\\Program Files\Microsoft Team Foundation Server 12.0\Tools\Deploy\ProcessTemplateManagerFiles
Note: I have a different TeamProjectB created using the Agile template created under the same Collection as my other TeamProjectA. Not sure if this has anything to do with my problem.

Hi NetLearuner15,
Thanks for your reply.
If you want use witadmin command on your TFS Server machine, you need install VS 2013 on your TFS 2013 Server machine.
Have you tried create new Bug using VS? The new added state value shows correctly in VS or cannot see it in VS too?
You’re using TFS 2013 Update 4 and VS 2013 Update 4?
Yes, you can restart your TFS Server and check the result.
And we suggest you add a new custom field in your Bug_Test work item type(Fields and Layout) or only edit a default state value in it using Process Editor, then save this Bug_Test work item type and check if this new update shows correctly when you create
a new Bug_Test work item from TFS Server. If the new field or changed state value can be updated correctly in your TFS Server, I think your initial ‘Duplicate’ state value not defined correctly in your Bug WIT>>workflow.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Maintain Spry Sliding Panel Focus once a Form has been submitted - DW CS5

I have a web page with 6 sliding panels.
The last panel has an email form.
Everything functions fine except for one item:
Once a user hits the Submit button on the form in the last panel the panels slide back to the first (0-default) panel.
How would I go about maintaining focus on that last panel (the one with the form on it) once the submit button is hit so that I can display the confirmation text?
Thanks in advance for any help or tips.

The scripting of a CGI or PHP mail form server side stuff is designed to:
a. open another page with a confirmation of the send or
b. refresh the page where the form is located so it appears as it did before the send.
When you refresh the page outside of a submit function (F5), the page defaults to the first panel because that's the way the script is written. It is neither abrupt nor awkward. It is the correct functioning of the javascript that controls the accordion, or in this case a slider.
You can maybe rewrite that script to prevent it from doing so, but I personally don't know how to.
As was pointed out by Nancy, keeping the form open in the panel, will more likely than not lead to viewers thinking that it didn't go, and they will submit the form multiple times, (thinkiing each time that it didn't work) before getting frustrated and leaving the page and site altogether.
If this is for simply aesthetic reasons, remember that "form follows function". In a choice between what works and what looks good, what works should always take priority. It doesn't matter how nice it looks if it defeats its purpose with the design being flawed.

How to tell if an instance of a bean has been created?

I'm trying to deploy a message driven bean, and from what I can tell it seems to deploy fine. I say this because it deploys my ear successfully and has INFO messages which seem to say all ejb(s) loaded successfully!.
However, I have tried to setup a pool of my mdb, so that a couple of instances pre-load. Here is my sun-ejb-jar.xml file:
<sun-ejb-jar>
<enterprise-beans>
<unique-id>1</unique-id>
<ejb>
<ejb-name>LoggerEJB</ejb-name>
<jndi-name>com.ecc.utils.LoggerTopic</jndi-name>
<mdb-connection-factory>
<jndi-name>com.ecc.utils.JMSTopicConnectionFactory</jndi-name>
</mdb-connection-factory>
<bean-pool>
<steady-pool-size>2</steady-pool-size>
<resize-quantity>1</resize-quantity>
<max-pool-size>5</max-pool-size>
<pool-idle-timeout-in-seconds>600</pool-idle-timeout-in-seconds>
</bean-pool>
</ejb>
</enterprise-beans>
</sun-ejb-jar>
As you can see, I'm trying to get 2 of them to be loaded in memory at all times. However, I don't believe it's acutally doing it. The reason is, I have System.out.println statments to output information on ejbCreate and other load steps that I'm not seeing in the main app server window. Shouldn't I see the output from the System.out.println statements?
Also, the mdb is looking for a data source that shouldn't exist, so I should see output from the .printStackTrace statement I have from catch the exceptions, and I'm not seeing those as well.
Finally, I even setup the mdb to write to a text file when it does load, and I can't find the file anywhere under the /AppServer7 directory. All this leads me to believe it is NOT loading any instances of my mdb.
Sooo, is there a way to tell if and how many instances of a bean are loaded? Also, if my depoyment descriptor is wrong, how do I fix it to pre-load instances of my mdb?
And, if it IS loading, where is my system.out.println and .printstacktrace output?
Thanks, Tony

Look in the app store - there are many apps that do anti theft tracking. Many can be defeated by factory resetting the device - it is simply the nature of how Apple restrict developers from locking an app to a device. A factory reset can be done in iTunes 'restore device' or via Settings > Reset, 'erase content & settings' in iOS.
If the company used iCloud for anti theft tracking you can't avoid it being reassociated with iCloud after a factory reset.
I also believe OS X server has similar features for anti theft tracking for corporate customers. So the device may be tied to an OS X server within the company, it;s unclear if the device will become reassociated, it depends on the company setup IIRC.
The simplest answer is to get the company IT to remove whatever they used. If you want to be certain there is no other jailbreaks on the device just factory reset it. That will also remove any data left over from a previous owner.

Changing unit price after AP invoice has been created

Hi all,
We realized the unit price was incorrect after the PO, GR and AP invoice was already created. Is there a way to update the unit price on the item?
Thanks,
Jane

Hi,
This is not possible, you have to reverse transaction by AP Credit memo and recreate new transaction. If you have FIFO valuation method then you can change price through Inventory Revaluation but in that case your AP Invoice amount remains unchange.
Regards,
Sachin

How can I see in which Group the workspace has been created ?

Hi,
The BeehiveOnline Tutorial on slide 7 shows that Workspaces are created within a Group.
Also the Group Administration screen suggests this as I can indicate that user ABC gets the role 'Workspace Creator' in one Group but same user ABC does not get the role 'Workspace Creator' in another Group. (what else is the purpose of this role within Group Administration)
But when I created my workspace, the system did not ask in which Group I wanted it to be created, neither can I see in the Settings of the new Workspace to which Group it belongs.
Can you please help ?
Thanks,
Peter

Peter,
Workspaces and groups can be confusing - apologies that it was not clear.
Perhaps some background as to why I described it that way may help.
BeehiveOnline relies on groups to be self-sufficient - if you are in one group your world of available participants is that group and that group alone. So if you want to create a new workspace and add users they can only be drawn from that group. - hence the workspaces within a group setup. However, if you are in multiple groups then the linkage gets broken as you could add members to a workspace from different groups - if you needed many group to share a repository of read-only info for instance. This is in wide use on BeehiveOnline. Read and Write access is more of a problem as if anyone updates a document or creates one their id will be attached to it and if they are in a group you as a workspace member cannot see it will cause confusion.
So workspaces are only group restricted if there is only one group. If you have multiple groups you have more scope but have to exercise more care.
Hope that explains it.
Phil

How to include Search Help which has been created using SE11

Hi all,
I have created the custom search help in SE11. What is the way to include it in my code? Thanks in advance.

Hi Mil,
There are different ways of using the search help created by SE11 depending on the kind of application you are using.
1. Search help can be attached to a DATA ELEMENT under the tab FURTHER CHARACTERISTICS.
Now wherever this data element will be used, automatically the search help will be available on the output screen. e.g. in selection screen using parameters statement etc.
PARAMETERS: P_VAL1 TYPE Z_DATAELE.
2. Search help can be also attached to database table fields directly in the tab Entry help/check. Now wherever this database table field is used e.g. in SELECT-OPTIONS statment, the search help will be automatically available on output selection screen.
3. Also, search helps can be directly used in the programs using function modules and event.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
Here in the module, you can use following function module for fetching the search help on the screen.
F4IF_FIELD_VALUE_REQUEST
4. Search help can be direclty attached to the selection screen statements like SELECT-OPTIONS using MATCHCODE object extension
SELECT-OPTIONS: LP_STATS FOR TJ30-ESTAT MATCHCODE OBJECT ZH_TJ30 NO-EXTENSION NO INTERVALS.
Hope this sort out your issue.
PS If the answer solves your query, plz close the thread by rewarding each reply.
Regards
Message was edited by:
Sapna Modi

How to insert condition on PO once GR has been created

Hi all,
I want to allow users to insert conditions on Purchase Order once Goods Received has been created. How do I do that?
Thanks,
Nas

Hi
You can add conditions in change mode ME22N.But it will not change the your Material documents that are already posted.Conditions applicable for balalnce quantity.
You have to cancel your material documents and do fresh GR to reflect the changes for already GR done quantity.
Regards
Ramakrishna

How do I change template designs once a form has been created using another template design?

Similar Messages

Maybe you are looking for