How do i change the user on the new health app?

How do I change the user on the new health app?

alsastud wrote:
How do I delete the old User and create my own name and settings?
Really, the best way is to "fool" the system into thinking this is a first run system. To do this, you need to do the following
First, boot into single-user mode by powering the system while holding the cmd-S key combination down. This should bring you eventually to a black screen with a Unix terminal display. Type the following three commands (that period before AppleSetupDone is very important):
/sbin/mount -uw / <cr>
rm /var/db/.AppleSetupDone <cr>
shutdown -r now <cr>
What should happen is that when the machine reboots after the last command, you should get a "Welcome to MacOS" routine which will ask you for user information and set up your new account using that information.
After you get that done, you should, one way or another, be able to delete the folder of the old user in the Users folder, though you may need some help with that as well.

Similar Messages

How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

You have to clear saved password for this page:
# Open you login page (where you have to enter username and password).
# Right click on page and select '''Page Info''' form context menu.
# On last tab ('''Security''') there is '''View saved passwords''' button, click it and delete all saved passwords for this page.
# Also clear all related cookies (just in case) there is button for this next to first one.

How do I change my user id from dsgence to dsgrence? Under the menu / title I keep getting where you would see a pop-up message title "know your rights" how do I get rid of that also?

How do I change my user name from dsgence to dsgrence? Under the title bar where you would see pop-ups a message "know your right" keeps coming up every time I reboot?

You can post a request in the contributors forum if you want to change the user name.
*https://support.mozilla.org/en-US/forums/contributors
Add [ATTN ADMIN] in front of the subject title to get the attention of a forum Administrator.
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

I purchased a MacBook Pro from the original owner. How can I change registered user?

I purchased a MacBook Pro from the original owner. How can I change registered user?

kirkbaby wrote:
I purchased a MacBook Pro from the original owner.
Did that Owner do this before you took delivery...
Apple What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
Also See Thomas Reed's How to Prepare your Mac for sale

How do I change my user name and password if I can't logon to the computer?

how do I change my user name and password if I can't logon to the computer?

What Mac is this with what version of OS X?

HT5622 How can I change the user of the IPad??

Any body knows how to change the user of the IPad 1

Sure. Erase the old user's information by doing:
Settings > General > Reset > Erase All Content and Settings
Then the new user will set up the iPad as if it just came out of the box.

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

How to make a text field required at run time when the user clicks the checkbox ?

I got a form where , there are several checkboxes and text fields associated with that checkboxes.If the use clicks on the check box then the associated
text fields should become required.I have tried the change event and the click event for the checkboxes.It gives error in the onChnage event and I got some weird results in the on click event .Sometimes if the user click the check box , then for the 1st time the field doesnt become required , then the user onclicks the check box and when the user clicks the checkbox for the second time the field becomes required,but if i deselects the highlighted field option and selects it again the field becomes required even if the user onchecks it I am totally confused !!! Adding to it i have also written the wrong code still i achieved the desired result ?? How it can be possible . I am writing the codes below , please help me as i am working under a deadline from the client.
onChange event :
var newVal = this.boundItem(xfa.event.newText);
if(newVal == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "disabled";
else
     xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "error";
For the onClick event :
var a = xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovere d_OnlyEnergyCharges").rawValue;
//app.alert(a);
if(a == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "error";
if(a == 1)
      xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "disabled";
   Please help someone !!!

I used the onchange event and wrote the code for it. I got the result . But there is a problem.All these fields are in a table and it's a dynamic table where you can add rows dynamically at the run time .I have other change event for some fields in this table .All are working fine when i add the row.But for this check box the required fields are not validated as required at the run time . I am here giving the code , Please help me .
form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovered_OnlyEnergyCharge s::change - (JavaScript, client)
if(this.rawValue == "1")
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory= "error";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandator = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory = "disabled";

How do I restore the user to the home folder permissions?

I just got an iMac from a friend and had changed the username and password for the administrator user. Then I was going to change the home folder name. I was looking at the info on the home folder (which at this point is still tied to the old user). I inadvertantly removed the user from the permissions before adding the new username or even allowing all users to access the home folder. Now I cannot access the home folder at all. How do I restore the permissions to the home folder or add the user back to the allowed users with access to the home folder?

dalefromdallas,
First you should do a clean install of the computer, while your friend may have included apps, they do not belong to you unless your friend gave y ou the install media and license codes. Considering the machine is also running 10.9.2. this machine will be forever tied to his AppleID which exposes him financially. You should get the 10.6.X DVD from your friend (I'm assuming he upgrade from 10.6.x at some point) and do an erase and install, then update it to 10.6.8 then upgrade yourself to 10.9.2 Mavericks. Then you will have a clean system, otherwise you will be working with a pretty kludged system that will probably be trouble.

When printing from iphoto all photographs ar printed in a pop art style rather than as seen - how do I change this to printing the photo as seen

When printing from iphoto all photographs are printed in a pop art style rather than as seen - how do I change this to printing the photo as seen?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Damaged preference files can cause a varitety of problems which you wouldn't think it could. Deleting and regenerating the pref file is one of the basic fixes to try.
OT

How do I change my Alias in the Discussions

How do I change my Alias in the Discussions
Sorry fo the off topic. Thanks if anyone can help.
Brian

You know I was only asking a question and venting my frustration. Thanks for the derogatory remark though... shheesh. Nice! Don't cha think when I signed up for the account when I was a newbie if I thought my full name was going to be used I would have picked something else? DUH. Now that I've posted a few items and see how it works and I want to change it but can't I find it very frustrating and the whole thing is less than user friendly. People come to these discussions for help not to be called names, but hey, thanks. Obviously things posted in discussion forums show up in search engines... point was I don't need my full name there. Typically if you delete an account, the postings remain, but the user information is "x"d out or deleted. My question was answered and I appreciate the responses of those who replied with useful remarks.

How to find out the user from the Jobs queue in Report server

Hello All!
I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has a column under "Job Owner". But it invariantly shows it is "rwuser". So is there a way to find out which user has scheduled which job?
Regards
Shobha

hi,
The below tables will give only the name .
USER_ADDRS
USER_ADDR
USER_ADDRP
USR02
i think you need email address .
you can use this Tcode : su01d
and give the user name and excute it
i hope it will help you.
Ram
Edited by: Ram velanati on Jun 30, 2008 6:57 PM

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

How can I change my visa on the apple account

How can I change my visa on the apple account

A number of ways to do this, but on the iPad:
Open the iTunes app ans select any of the product categories at the bottom (music, for example).
Scroll down and then tap on the button with your AppleID
Tap View ID
Login
Select Payment information and edit the info, then save

How can I change one section of the document to a landscape orientation and not the whole document?

How can I change one section of the document to a landscape orientation and not the whole document?

Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry

How do i change the user on the new health app?

Similar Messages

Maybe you are looking for