How do I change the Win7 boot disk under BootCamp?

I have been getting warnings that my Window7Pro64 hard disk may crash. I bought a new disk. Installed it in my Mac Pro. Set up the partitions and cloned my boot disk to the new disk. At the end of the process of creating the clone, the software will shut the computer down. I am instructed to enter the Bios in order to assign the Clone disk as the new 'boot' disk.
Since I am running under Boot Camp I am wondering if I need to follow another procedure? I am inquiring before the cloning process has completed, so I haven't tried rebooting into Bios...
Thanks for any insight...!
Jim

So, Mr. Hatter...
You have raised some additional questions:
1. Will Boot Camp now support Windows 8?
2. On the Windows side of Boot Camp I have installed Acronis software to clone my old boot disk (500GB) to a new clone disk (1TB). That cloning process worked. I rebooted to the Mac side. I chose Boot Camp and chose to reboot into Windows 7 using the new clone disk. Windows booted up. It appears to me that I now have two Windows bootable disks. Is this correct? Does this create any potential problems?
3. On the Mac side of Boot Camp, I have installed Carbon Copy to clone my old boot disk (500GB) to a new Clone disk (1TB). That cloning also appears to have worked. It appears I now have two bootable disks on the Mac side, too. Any problems with that?
4. Inside my MacPro my 4 drive bays are currently assigned disks in the following order (reading from the left side of the compartment): Drive Bay 1: MacBoot (500GB); Drive Bay 2: WinClone (1TB); Drive Bay 3: MacClone (1TB); Drive Bay 4: WinBoot (500GB). The reason I ask is because when I go into Acronis / Carbon Copy they report the disks as Primary Master / Primary Slave; and Secondary Master / Secondary Slave without regard to their physical locations. This is suggesting the master / slave relationship may need to be maintained physically - in which case my allocation of disks to bays would be incorrect. Any insight on this topic may reduce my anxiety that I could be causing a disk failure (I had a new 1TB disk indicate a mechanical failure and replaced it with the current, new MacClone (1TB) disk. It is in the same bay relationship. This got me thinking... is it possible to have a Mac disk as Primary Master and a Win disk as its Primary Slave? If so, what damage might result).
In any case, at the moment, everything seems to be functional on both sides (Mac & Win). However, I rarely come out of these exercises with a complete sense of security that I have done everthing correctly...
5. Should I still run CHKDSK? How do I invoke it?
6. What is NVRAM and how do I invoke it? Does it apply to both Win & Mac?
7. Still boot from Win7 DVD and run system repairs?
Sorry to burn your ears, but its on my mind and since you guys have sooo... many 'help' points I figured I tapped into serious capabilities I should not pass up!
Thanks, again
Jim

Similar Messages

How can I change the displayed account name under mailboxes in my mail post iCloud merger?

How can I change the displayed account name under mailboxes in my mail post iCloud merger?

Hi ..
You would have to sign out in order for your account name to not be visible.
Click your account name then click Sign Out.

How do I change the preview cache disk?

I keep seeing statements such as "there is nothing to stop
you from locating the preview cache on another disk". Um.. there is a problem.
I find no option to do it anywhere. In catalog settings it only "Shows" the location and does not allow changing it. Am I missing something? I have looked and looked and the process is described nowhere. It is very frustrating because I can find these things on my own quite readily and in LR its totally buried if its possible at all.
Also;
How can I change the default camera calibration from the ACR 4.4 to Adobe standard ? The first thing I have to do after every import is go back and sync to a different camera profile.
Thanks in advance for any help

In order that you can change the camera default profile you must be in the Develop module then change the profile to Adobe Standard. Next, choose Default Settings from Develop module. When the dialog appears you should click on Update to Current Settings...
It's not possible to change the location of the library preview cache because it must be in the same folder as the catalog. However, changing the Camera Raw preview cache (used by Develop module) location is done through Preferences. The following screen shot shows you where to make the change.

How do I change the InDesign scratch disk?

I have InDesign installed on an SSD with an HDD for data. My Windows 8 page file is on my HDD. I've changed the document recovery folder in InDesign to the HDD, but whenever I try to export a complex indd to make a print PDF it fills my SSD and crashes. I do NOT want InDesign constantly writing to my SSD, but I can't seem to find an option to move the scratch disk location. Help?

See http://forums.adobe.com/message/4705644#4705644
There are two different discussions entwined, but one of them involves a small ssd and moving the user profile. ID uses the temp file in your user profile for scratch and as far as I know you cannot specify a new location for that the same way you can for recovery. The usual method of changing the environment variable does not work.

I have a windows 7 dvd in the drive and the mac is set to launch from the dvd drive. How do I change the startup disk?

I have a windows 7 dvd in the drive and the mac is set to launch from the dvd drive. How do I change the startup disk?

Hold the option key at startup and when you get to the boot panel select your Mac OS drive.

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk?

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk? It is the start up disk and I can't figure out how to get it out of the computer so I can put my lion boot disk in. Thanks

turn the mac all the way off. turn the mac on by pressing the power button. as soon as the apple logo appears, pres and hold your mouse button(trackpad mouse clicker etc...) until the CD comes out.

My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

See #5
Step by Step to fix your Mac

How can I change the iPhone backup location on my Mac to an external hard disk?

Thank you.

This previous discussion may be of interest: how do i change the file location of a backup on my computer

HT3986 Using Boot Camp 4 and Windows 7. Try to change name of the C: drive and get the dialog "You will need to provide administrative permission to change the name". How do I change the C: drive name?

I tried to change name of the C: drive and get the dialog "You will need to provide administrative permission to change the name". How do I change the C: drive name?

Forgot to specify:
Im using an older Unibody Macbook (back when they were not all macbook pro's) 2008ish with Snow leopard 1.6.8
The thread you linked me to, Eric, shows the guy 'Niganit' with the eXACT SAME PROBLEM as me! He seems to have found out the problem but I dont see his resolve.
I just dont have the option to install windows 7 in any other form that a cd
a picture;

How do I change the admin password on my MacBook pro

I have forgotten my password and I don't want to wipe my hard drive how do I change the password?
I have done the following:
Rebooted selected a language, it then went right back to the installer but there was no change password as an option.
Under disk utility it was not high lighted.

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Best Practice??? Change from internal boot disk to external disk

I have a mini running 10.5.6 server and it currently boots off it's internal disk. I was hoping to get some feedback/input from others on a good process to convert the system from it's internal boot disk to an external boot disk (firewire).
I wanted minimum downtime during the conversion and I of course, want a complete snapshot on the new boot disk. Lastly, I do not have a local keyboard and console on the system although I could connect one if it seemed to be much easier that way.
In general, I am thinking of the following:
1) Boot into the Leopard Server CD.
2) Use diskutility to Restore from the internal boot disk to the new external boot disk.
3) Choose the new boot disk as the startup disk.
4) Reboot onto new disk.
Is diskutility the best bet?? Meaning will it work this way if the drives are different sizes??
Should I try to clone the disk from the internal boot disk (assuming I shutoff services first) using SuperDuper or Carbon Copy Cloner?? But I believe they do not copy over all logfiles, etc..
Or does anyone have a quick overview of a methodology which they have done in the past or just are suggesting might be a better process than the ones I described??
In Summary:
1) From the CD, clone using diskutil and change boot disk
2) From the running OS, clone using SuperDuper or CCC and than reboot onto new disk
3) Something else??
Thank you in advance.

For cloning the machine you have the approach fine. Disk Utility is fine and booting from the CD is the best method. Simply use the restore method.
But why on earth would you want to boot from an external Firewire drive? First, there is the issue of speed. You have a mini, let's assume it is a one generation back Intel. It has an internal SATA drive on a 1.5 Gbps connection. You want to move that to a 400 Mbps Firewire bus? Next, beyond the speed issues, you have a persistence issue. You are taking the boot volume and moving into to a transitory bus. One of Firewire's greatest strengths is easy connection/disconnection. Persistence is not a strong point.
Next, if your plan is to move the boot volume to some form of a Firewire RAID, then you are even penalizing yourself more. The mini has one FireWire port. If you are using two devices and creating a mirror RAID, then you need to daisy chain. Talk about points of failure, asynchronous startup time, bus blocking, etc. Not wise.
Plus, I can not count how many external firewire devices have burnt up in the effort to have small footprints. Lacie and the "let's put a drive in a metal case with no fan" approach = melted drive. Western Digital and Lacie with the "let's make a completely un-reusable external power brick that either breaks in a small breeze or falls out when the heavy guy walks by the server" approach.
If you are looking at a Firewire RAID enclosure, then you are missing the objective of speed as you are limited by the 400 bus. It is nice to say that you have a four drive SATA 2 RAID case running a RAID 5, but you are defeating the purpose of why you bought the raid. The RAID 5 can provide an exponential increase in I/O performance. But that goes out the window because of the slow bus.
If your argument is that "this is a server and my bottleneck is Ethernet," that too does not hold up. You are likely running on a gigabyte network.
For system details check out http://developer.apple.com/documentation/HardwareDrivers/Conceptual/Macmini_0602 /Articles/architecture.html.
Take this with a grain of salt. You caught me on a grumpy day as yesterday I dealt with a melted external firewire drive.
My advice is buy real server class hardware. What is you objective? Drive redundancy? Capacity? A mini is a great dev server. Not a production server. This is your data. Presumably the data that makes your business function. Don't trust it to a single platter. And don't trust it to a consumer level, disposable system. I am not trying to malign the mini. It is a fine machine for its role. Its role however is not to be a production file server. Now as a web server, we are talking a different situation.
Ok, I am rambling. Hope this helps in some way.

How to back up a ZFS boot disk ?

Hello all,
I have just installed Solaris 10 update 6 (10/08) on a Sparc machine (an Ultra 45 workstation) using ZFS for the boot disk.
Now I want to port a custom UFS boot disk backup script to ZFS.
Basically, this script copies the boot disk to a secondary disk and makes the secondary disk bootable.
With UFS, I had to play with the vfstab a bit to allow booting off the secondary disk, but this is not necessary with ZFS.
How can I perform such a backup of my ZFS boot disk ?
I tried the following (source disk: c1t0d0, target disk: c1t1d0):
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 110G 118G 94K /rpool
rpool/ROOT 4.58G 118G 18K legacy
rpool/ROOT/root 4.58G 25.4G 4.50G /
rpool/ROOT/root/var 79.2M 4.92G 79.2M /var
rpool/dump 16.0G 118G 16.0G -
rpool/export 73.3G 63.7G 73.3G /export
rpool/homelocal 21.9M 20.0G 21.9M /homelocal
rpool/swap 16G 134G 16K -
# zfs snapshot -r rpool@today
# zpool create -f -R /mnt rbackup c1t1d0
# zfs send -R rpool@today | zfs receive -F -d rbackup               <- This one fails (see below)
# installboot /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/c1t1d0s0
The send/receive command fails after transfering the "/" filesystem (4.5 GB) with the following error message:
cannot mount '/mnt': directory is not empty
There may be some kind of unwanted recursion here (trying to back up the backup or something) but I cannot figure it out.
I tried a workaround: creating the mount point outside the snapshot:
zfs snapshot -r rpool@today
mkdir /var/tmp/mnt
zpool create -f -R /var/tmp/mnt rbackup c1t1d0
zfs send -R rpool@today | zfs receive -F -d rbackup
But it still fails, this time with mounting "/var/tmp/mnt".
So how does one back up the ZFS boot disk to a secondary disk in a live environment ?

OK, this post requires some clarification.
First, thanks to robert.cohen and rogerfujii for giving some elements.
The objective is to make a backup of the boot disk on another disk of the same machine. The backup must be bootable just like the original disk.
The reason for doing this instead of (or, even better, in addition to) mirroring the boot disk is to be able to quickly recover a stable operating system in case anything gets corrupted on the boot disk. Corruption includes hardware failures, but also any software corruption which could be caused by a virus, an attacker or an operator mistake (rm -rf ...).
After doing lots of experiments, I found two potential solutions to this need.
Solution 1 looks like what rogerfujii suggested, albeit with a few practical additions.
It consists in using ZFS mirroring and breaking up the mirror after resilvering:
     - Configure the backup disk as a mirror of the boot disk :
     zpool attach -f rpool <boot disk>s0 <backup disk>s0
     - Copy the boot block to the backup disk:
     installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/<backup disk>s0
     - Monitor the mirror resilvering:
     zpool status rpool
     - Wait until the "action" field disappears (this can be scripted).
     - Prevent any further resilvering:
     zpool offline rpool <backup disk>s0
     Note: this step is mandatory because detaching the disk without offlining it first results in a non bootable backup disk.
     - Detach the backup disk from the mirror:
     zpool detach rpool <backup disk>s0
     POST-OPERATIONS:
     After booting on the backup disk, assuming the main boot disk is unreachable:
     - Log in as super-user.
     - Detach the main boot disk from the mirror
     zpool detach rpool <boot disk>s0
This solution has many advantages, including simplicity and using no dirty tricks. However, it has two major drawbacks:
- When booting on the backup disk, if the main boot disk is online, it will be resilvered with the old data.
- There is no easy way to access the backup disk data without rebooting.
So if you accidentally lose one file on the boot disk, you cannot easily recover it from the backup.
This is because the pool name is the same on both disks, therefore effectively preventing any pool import.
Here is now solution 2, which I favor.
It is more complex and dependent on the disk layout and ZFS implementation changes, but overall offers more flexibility.
It may need some additions if there are other disks than the boot disk with ZFS pools (I have not tested that case yet).
***** HOW TO BACKUP A ZFS BOOT DISK TO ANOTHER DISK *****
1. Backup disk partitioning
- Clean up ZFS information from the backup disk:
The first and last megabyte of the backup disk, which hold ZFS information (plus other stuff) are erased:
dd if=/dev/zero seek=<backup disk #blocks minus 2048> count=2048 of=/dev/rdsk/<backup disk>s2
dd if=/dev/zero count=2048 of=/dev/rdsk/<backup disk>s2
- Label and partition the backup disk in SMI :
format -e <backup disk>
     label
     0          -> SMI label
     y
     (If more questions asked: press Enter 3 times.)
     partition
     (Create a single parition, number 0, filling the whole disk)
     label
     0
     y
     quit
     quit
2. Data copy
- Create the target ZFS pool:
zpool create -f -o failmode=continue -R /mnt -m legacy rbackup <backup disk>s0
Note: the chosen pool name is here "rbackup".
- Create a snapshot of the source pool :
zfs snapshot -r rpool@today
- Copy the data :
zfs send -R rpool@today | zfs receive -F -d rbackup
- Remove the snapshot, plus its copy on the backup disk :
zfs destroy -r rbackup@today
zfs destroy -r rpool@today
3. Backup pool reconfiguration
- Edit the following files:
/mnt/etc/vfstab
/mnt/etc/power.conf
/mnt/etc/dumpadm.conf
In these files, replace the source pool name "rpool" with the backup pool name "rbackup".
- Remove the ZFS mount list:
rm /mnt/etc/zfs/zpool.cache
4. Making the backup disk bootable
- Note the name of the current boot filesystem:
df -k /
E.g.:
# df -k /
Filesystem kbytes used avail capacity Mounted on
rpool/ROOT/root 31457280 4726390 26646966 16% /
- Configure the boot filesystem on the backup pool:
zpool set bootfs=rbackup/ROOT/root rbackup
Note: "rbackup/ROOT/root" is derived from the main boot filesystem name "rpool/ROOT/root".
- Copy the ZFS boot block to the backup disk:
installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/<backup disk>s0
5. Cleaning up
- Detach the target pool:
zpool export rbackup
I hope this howto will be useful to those like me who need to change all their habits while migrating to ZFS.
Regards.
HL

How can I change the administrator name?

I'm getting ready to sell my old I-mac. How do I change the administrator name or delete it?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. If this is not possible then simply erase the drive. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

How do I change the partition scheme to use GUID partition Table.

How do I change the partition scheme to use GUID partition Table so I can get Snow Leopard to download on my 10.5 disk.
When I insert the disk it asks me to select the disk where you want to install MAC OS X.It only give me one option the 10.5.
when I click on it it says...
"10.5" can't be used because it doesn't use the GUID Partition Table scheme.
Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options.
I tried to do what it says and I can not find what it is saying. This is the info about my MacBook.
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version (system): 1.31f0
Thank you for your help!

The GUID partition option is one of three possible choices (click the "Options" button in the Partition") menu - be careful to have a full backup as changing the partition scheme will force an erasure on the disk. Take a look at this Apple support article for more complete information:
Firmware updates for Intel-based Macs require a GUID partition scheme - Apple Support
Ignore the stuff about firmware updates and just look at the changing GUID partition scheme.
Good luck - and don't forget about the full backup BEFORE making this sort of change.

How do I change the Win7 boot disk under BootCamp?

Similar Messages

Maybe you are looking for