How do I clear a TextEntry control programatically with Lookout 4.0.1?

I am trying to put together an entry form using TextEntry objects in Lookout 4.0.1 build 51. I want to clear out the previous text from the TextEntry controls when the panel activates. This was an easy thing to do in Lookout 3.8 but the nature of the Remote field has changed and I don't think I understand how it works. Thanks...

You can clear the TextEntry box with the 'reset' datamember. Connect to it either Panel1.active or Panel1.visible depending on your specifc needs (and where Panel1 is your panel).
E.g.,
TextEntry1.reset = Panel1.visible
BTW, if you want to display a default text then use the 'ResetValue' datamember, if not then just don't connect anything to it.
Rgds,
Khalid

Similar Messages

How can I use a iteration control to compare with array?

Dear All
I have done a program and I need to test me program...but I seem to have to problem...I don't know how to use a iteration ( a for loop ) to test my program...
My test code is written like this...
public class ClockWatchDemo
public static void main(String[]args)
TimePiece[] tpList = new TimePiece[3];
tpList[0] = new Watch(200, "Vintage", "Men");
tpList[1] = new Clock(400, "Classic", 70);
tpList[2] = new Clock(300, "Futuristic", 45);
for(int i=0; i<3; i++)
if( i == tpList[0] ) // how can I do to compare my temp integer with the array number?
System.out.println(tpList[0].toString() + "\n");
else
return "";
Please advise

Thank you for your help but how can i compare my temp int i to the tpList array?
I wanted to do something like this
if( i == tpList)
System.out.println(tpList[i].toString() + "\n");
but I will get prompt to inform me that
if( i == tpList[i])
incomparable types : int and TimePiece
Please advise.
Thank you

No ISA slot available in PC. How can I use PCI-85 Modbus Plus card with Lookout?

My application is to communicate with two Modicon PLCs using Modicon's ModBus Plus (PCI based PCI-85) network card inside my PC, and using Lookout as an SCADA software. Since there is no ISA slot available in new PCs, I can not use Modicon's ISA-85 Modbus Plus networc card. But Lookout does not support PCI based PCI-85 card, how can I use PCI-85 card then, with Lookout? Why doesn't Lookout support it? I asked the following question from from the Modicon's representative about it:
If I purchase Modbus Plus Driver Suite CD (SWMXDS001, 05, or 10 etc),will I be able to use Lookout SCADA software (by the way, it supports standard MB+ prtocol) for my application? If yes, can I use any version of an
y of the ISA, PCI, or PCMCIA based MB+ card?
His answer was:
The Modbus Plus Driver Suite will talk to any version of card, PCMCIA, ISA, and PCI. The question now is will the SCADA package you are
planning on using be able to talk to the Modbus Plus Driver Suite? You must contact National Instruments and ask them if they support Modbus Plus, and if
they used the MB+ system developement kit to develop their product. Or if they wrote their own MB+ drivers, do they work with Modicon hardware?

Hi,
currently Lookout does not support the PCI-85 card. The only card supported for Modbus Plus is SA-85. Please see for further information:
Where can I Find Drivers for Communicating to PLCs, RTUs, and Other Industrial Hardware?
How to configure the SA-85 card for Modbus Plus
Hope this helps
Roland

How do I clear the cache using a Mac with ver. 3.6.3?

I am using a Mac OS x (10.6.2). I need to clear the cache in Firefox ver. 3.6.3. Please help. Thank you.
== This happened ==
Not sure how often
== Today

You are most welcome

HT1918 How do I clear a message about a problem with a previous purchase when my order history shows no purchases?

I am trying to download an app. I get a message that says there is a problem with a previous purchase. I log into the store and there is no history. I updated my address but continue to get the same message and cannot download my desired app. Any suggestions please?

If you get a pop-up message asking to update Firefox or plugins or scanning for malware then such a message is likely a scam and you should never respond to such an alert to avoid getting infected with malware.
*Only update Firefox via "Help > About" or by downloading and installing Firefox from the Mozilla server and never via a pop-up or link on a web page.
*Plugins should only be updated via the plugin itself or by visiting the home page of the plugin.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I have a corrupted music file. How do I clear it / re-download?

I have a corrupted music file. How do I clear it / re-download?

Same with me. But mine is a video (teh art of flight). It freezes in the middle when I play doesnt matter which device I use to play = on iTunes, iPad 2, iphone 4s = it just freezes in the middle.

How to clear the table control content

Hi All,
I am doing BDC for cost estimate change. In this the transaction KKPB contains table control. So when ever i process with particular cost estimate, i need to fill the table control with the values. Here when i am doing the BDC for change, i need to clear all the contents of the table control then i need to fill with new entries.
So my problems is how to clear the table control entriee?? please help me in this??
Many Thanks,
Raghu.

Hi this might help u.
Check the below link.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
 NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
 i1 TYPE i,
 lifnr LIKE rf02k-lifnr,
 bukrs LIKE rf02k-bukrs,
 ekorg LIKE rf02k-ekorg,
 ktokk LIKE rf02k-ktokk,
 anred LIKE lfa1-anred,
 name1 LIKE lfa1-name1,
 sortl LIKE lfa1-sortl,
 land1 LIKE lfa1-land1,
 akont LIKE lfb1-akont,
 fdgrv LIKE lfb1-fdgrv,
 waers LIKE lfm1-waers,
 END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
 j1 TYPE i,
 banks LIKE lfbk-banks,
 bankl LIKE lfbk-bankl,
 bankn LIKE lfbk-bankn,
 END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 filename = 'C:\first1.txt'
 filetype = 'DAT'
 TABLES
 data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 filename = 'C:\second.txt'
 filetype = 'DAT'
 TABLES
 data_tab = jtab.
LOOP AT itab.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF02K-KTOKK'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RF02K-LIFNR'
 itab-lifnr.
 PERFORM bdc_field USING 'RF02K-BUKRS'
 itab-bukrs.
 PERFORM bdc_field USING 'RF02K-EKORG'
 itab-ekorg.
 PERFORM bdc_field USING 'RF02K-KTOKK'
 itab-ktokk.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-LAND1'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFA1-ANRED'
 itab-anred.
 PERFORM bdc_field USING 'LFA1-NAME1'
 itab-name1.
 PERFORM bdc_field USING 'LFA1-SORTL'
 itab-sortl.
 PERFORM bdc_field USING 'LFA1-LAND1'
 itab-land1.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-KUNNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKN(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 cnt = 0.
 LOOP AT jtab WHERE j1 = itab-i1.
 cnt = cnt + 1.
 CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-banks.
 CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-bankl.
 CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-bankn.
 IF cnt = 5.
 cnt = 0.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=P+'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKN(02)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 ENDIF.
 ENDLOOP.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB1-FDGRV'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFB1-AKONT'
 itab-akont.
 PERFORM bdc_field USING 'LFB1-FDGRV'
 itab-fdgrv.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB1-ZTERM'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB5-MAHNA'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFM1-WAERS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFM1-WAERS'
 itab-waers.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF02K-LIFNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
 PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
REPORT zmm_pr_upload_mat
 NO STANDARD PAGE HEADING
 LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
 sno(3), " SNo
 bsart(004), " PR Type
 epstp(001), " Item Category
 knttp(001), " Account Assignment
 eeind(010), " Delivery Date
 lpein(001), " Category of Del Date
 werks(004), " Plant
 lgort(004), " Storage Location
 ekgrp(003), " Purchasing Group
 matkl(009), " Material Group
 bednr(010), " Tracking No
 afnam(012), " Requisitioner
Item Details
 matnr(018), " Material No
 menge(017), " Quantity
 badat(010),
 frgdt(010),
 preis(014), " Valuation Price
 waers(005), " Currency
 peinh(005),
 wepos(001),
 repos(001),
 sakto(010), " GL Account
 kostl(010), " Cost Center
 bnfpo(005),
 END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
 sno(3), " SNo
 bsart(004), " PR Type
 epstp(001), " Item Category
 knttp(001), " Account Assignment
 eeind(010), " Delivery Date
 werks(004), " Plant
 lgort(004), " Storage Location
 ekgrp(003), " Purchasing Group
 matkl(009), " Material Group
 bednr(010), " Tracking No
 afnam(012), " Requisitioner
 END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
 sno(3), " SNo
 matnr(018), " Material No
 menge(017), " Quantity
 preis(014), " Valuation Price
 sakto(010), " GL Account
 kostl(010), " Cost Center
 END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
 v_rowno(5), " Row No
 v_2(2), " Counter
 v_rows LIKE sy-srows, " Rows in TC
 v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = syst-cprog
 dynpro_number = syst-dynnr
 IMPORTING
 file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
 EXPORTING
 filename = p_file
 filetype = 'DAT'
 TABLES
 data_tab = i_pr
 EXCEPTIONS
 conversion_error = 1
 invalid_table_width = 2
 invalid_type = 3
 no_batch = 4
 unknown_error = 5
 gui_refuse_filetransfer = 6
 OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
 MOVE-CORRESPONDING i_pr TO it_item.
 APPEND it_item.
 CLEAR it_item.
 AT END OF sno.
 READ TABLE i_pr INDEX sy-tabix.
 MOVE-CORRESPONDING i_pr TO it_header.
 APPEND it_header.
 CLEAR it_header.
 ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
 PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBAN-BEDNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'EBAN-BSART'
 it_header-bsart.
 PERFORM bdc_field USING 'RM06B-EPSTP'
 it_header-epstp.
 PERFORM bdc_field USING 'EBAN-KNTTP'
 it_header-knttp.
 PERFORM bdc_field USING 'RM06B-EEIND'
 it_header-eeind.
 PERFORM bdc_field USING 'RM06B-LPEIN'
 it_header-lpein.
 PERFORM bdc_field USING 'EBAN-WERKS'
 it_header-werks.
 PERFORM bdc_field USING 'EBAN-LGORT'
 it_header-lgort.
 PERFORM bdc_field USING 'EBAN-EKGRP'
 it_header-ekgrp.
 PERFORM bdc_field USING 'EBAN-MATKL'
 it_header-matkl.
 PERFORM bdc_field USING 'EBAN-BEDNR'
 it_header-bednr.
 PERFORM bdc_field USING 'EBAN-AFNAM'
 it_header-afnam.
Item Details
 v_l = 0.
To add no. of rows
 v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
 v_rowno = 130 .
 LOOP AT it_item WHERE sno = it_header-sno.
 v_l = v_l + 1.
 IF v_l = 14 .
 IF v_2 = 12 .
 v_2 = 12 .
 v_l = 2 .
From second time onwards it is displaying 12 rows only
 v_rowno = v_rowno + 120 .
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'RM06B-BNFPO'
 v_rowno.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 ELSE.
V_2 initialized to 12 for second screen purpose
 v_2 = 12 .
 v_l = 2 .
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'RM06B-BNFPO'
 v_rowno .
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 ENDIF.
 ENDIF.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 CLEAR v_field.
 CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
 PERFORM bdc_field USING v_field it_item-matnr.
 CLEAR v_field.
 CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
 PERFORM bdc_field USING v_field it_item-menge.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBAN-PREIS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'EBAN-PREIS'
 it_item-preis.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBKN-SAKTO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'EBKN-SAKTO'
 it_item-sakto.
Cost Center
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-KOSTL'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'COBL-KOSTL'
 it_item-kostl.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 ENDLOOP.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
Call The Transaction
 PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
with regards,
Hema Sundara.

How do you clear out a tree control?

I am editing items in a tree control, when the editing is complete, I re-build the tree to represent what I have after the edit. My process of deleting the items one-by-one has worked fine until the tree scrolled off the top, then, when I select the top-left item and delete everything under it, I miss the ones that have scrolled off the top.
What's the method/property I should use to clean out a tree in one operation? (before rebuilding)
...Dan

Tray Drool!
Originally I had, "How do you clear out a tree?". That's why I added "control".

Control H brings up a number of folders that i do not want seen or use anymore. How Do i clear this out ?

How do i clear out the folders that appear when you hit control H ?

KB article [[Clear Recent History]] should answer your questions about clearing history and handling settings for history.
A shorter history cleaning guide can likewise be found here: [[Clearing private data]].
Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help you better, plus enables us to better help other users with similar issues.

How can I fix Dock/Mission Control/Launchpad? (Glitch)

General Description
Mission Control and Launchpad glitch when invoked (whether by using the mouse or trackpad gesture). They seems to crash or quit, and then relaunch themselves (/itself - all the same app?), I know this because:
they both, as well as Dock, become unresponsive;
the desktop background images disappear temporarily (being replaced by blank light or dark grey);
the Mission Control animation stops/freezes and does not execute properly (the windows stay still);
Dock becomes unresponsive as well as Launchpad.
This happens a lot (every other invokation) and seems to be random; it's annoying and is ruining my workflow, since I am a heavy user of multiple desktops.
Behaviour
I usually have over ten desktops, all with active apps open at one time; when it glitches I can't even open or switch applications, though I can use the ones that are on the current desktop (if was trying to use Mission Control).
There is no correlation with the glitch and the amount of applications open, or how much RAM or CPU is active (still happens with only a few light apps open and a few desktops).
It does not matter whether I am using more than one monitor, the glitch still occurs.
It does not happen due to a particular open application, as I have tested with nothing open at all straight after a restart.
Possible and tested causes
An application might be corrupting the glitchy app(s), since the disk breaks after being repaired in Safe Boot mode. Once the disk has been repaired, the glitch doesn't seem to occur until a few applications have been opened, though I haven't tested this much. (I am suspecting TheBrain, but not sure. Other potential culprits: Chrome, Mail, Firefox, Spotify, Skype, Dictionary, Activity Monitor, Finder).
It isn't the operating system itself because I have reinstalled it from Safe Boot mode, and yet the glitch persists.
The application(s) affected by the glitch may be corrupted, and need reinstalled - that is, if they weren't already by reinstalling the operating system (they are in the '/System/CoreServices' folder).
Not-so-possible:
I doubt it is a virus - it would be a pretty pointless glitch for one to cause.
I have Time Machine running most of the time, but I have no reason to believe that is the cause.
I am using a NEET mini display port to HDMI adapter for my second monitor (no idea how that could be causing the issue).
Help
Any ideas on what I could do to fix this?
And does anyone know how to reinstall Mission Control, Dock and Launchpad (I think they are all part of '/System/Library/CoreServices/Dock.app')? This might be worth a try.
Specifications (just in case)
2010 Macbook Pro
2.8 GHz Intel i7
8 GB memory
500 GB HD (two thirds full)
Thanks for any help!

One thing I'd like for you to try: Create a new user account. Log into the new account and see if the same problems persist.
Many times such crashes are the result of corrupted preference or cache files. The above will eliminate these in the user account but not at the system level. So, I suggest you use a utility such as Lion Cache Cleaner 6.0.11 or Purity 1.10 to clear out cache files at the system level. I've never used the latter software but I, personally, use the former one on my computers.

GR/IR Key manditory in PO...How can i clear customs duty befor GR

Hi All,
As per the business requirement, i made GR based IR manditory in PO. Now for Import Pos, how can i clear the customs duty before doing GR.]
Regards,
Naidu.

Hi
Custom duty is a delivery cost. You can process the delivery cost before GR even with activation of "GR Based IV".
Control due to "GR Based IV" is applicable for goods item invoice.
warm regards
sairam akundi

How do I clear a song that won't download in Itunes? Also, can I get a refund for the song?

How do I clear a song that won't download in Itunes? Also, can I get a refund for the song?

Hi Allan ..
From your iTunes library, right or control click the song then click Delete.
Apple's policy states that, "all sales are final" >> iTUNES STORE - TERMS AND CONDITIONS

How do you clear the "Used supplies in use" message

I had a Laserjet 1525nw printer replaced under warranty. The service folks re-installed my original cartridges but now I get the Used Supplies in Use message and I cannot ge the information on how much supply is left in each cartridge. How do I clear this message?

Hi dgaraux1,
Here is a link to a support document that will help interpret control panel and status alert messages. You exact status message in listed in the document says there is not required action on your part.
Hope this is helpful.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Hi All, How we can handle a table control in bdc - in detail its urgent pls

Hi All, How we can handle a table control in bdc - in detail its urgent. Please send me the explanation in detail.
Thanks&regards.
Bharat

hi,
Create Table Control
Step 1 (Create new structure for table control)
Type is name of structure (ZTC_EKKO) and press create
Step 2 (Create Program)
Goto transaction SE80(Object Navigator) -> Repository Browser -> Program.
Enter your program name, please ensure that is begins with SAPMZ as this is a module pool (dialog program).
Press enter to create, and press yes!
Ensure that you create a top include, and press Enter.
Accept the name created for the top include.
Press Enter.
Press Save
Step 3 (Create TOP include)
Double click on the top include and enter following ABAP code:
Tables: ZTC_EKKO.
controls: tc100 type tableview using screen 100.
data: ok_code type sy-ucomm.
data: it_ekko type standard
table of ZTC_EKKO initial size 0,
wa_ekko type ZTC_EKKO.
data: ok_code type sy-ucomm.
Press Save and Activate
Step 4 (Create screen)
Right click the program to create a screen 100 for the dialog. Enter Short description, set screen type to Normal and enter 0 or blank into Next screen. Then move to Element List tab and enter the OK code as OK_CODE (i.e. the same as what you declared in the top include with data: ok_code type sy-ucomm).
Step 5 (Create table control)
Press the Layout button to bring up the screen painter editor.
Press table control button and drag it on to the screen, enter the name of table control created in TOP include (TC100). Now press the yellow button for attributes and set the table control as below options
Step 6 (Populate table control )
Press the orange button (Fields). On the next screen enter ZTC_EKKO and press the Get from Dict button. Select the fields you want (all) and press enter. Now drag them onto your Table Control.
Below is the result, there will been syntax errors if we check now! So Save and go back into the flow logic tab.
Step 7 (Create flow control )
Within the flow logic of screen 100 and create two modules, one to select the data from the database and the other to move the selected fields into the table control. Also insert the two loop statements to populate and retrieve the lines of the table control.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
module data_retrieval.
loop at it_ekko into wa_ekko with control TC100.
module populate_screen.
endloop.
PROCESS AFTER INPUT.
loop at it_ekko.
endloop.
MODULE USER_COMMAND_0100.
Double click the module data_retrieval to create and click yes to get past the popup. Ensure that a new include is created to hold all the PBO modules (default). Press enter.
Select 10 rows of data from the EKKO table and load into the internal table it_ekko. Go back to the flow logic to load this data into the Table Control.
check this one
REPORT ZCALL_TRANS_TAB1 .
TABLES: LFA1,LFBK,lfb1.
data: BEGIN OF it_vendor occurs 0,
LIFNR LIKE LFA1-LIFNR,
bukrs like lfb1-bukrs,
END OF it_vendor.
DATA: BEGIN OF IT_BANK occurs 0,
LIFNR LIKE LFA1-LIFNR,
BANKS LIKE LFBK-BANKS,
BANKL LIKE LFBK-BANKL,
BANKN LIKE LFBK-BANKN,
koinh like lfbk-koinh,
END OF IT_BANK.
data: it_bdcdata like bdcdata occurs 0 with header line.
data: it_messages like bdcmsgcoll occurs 0 with header line.
*selection screen.
selection-screen: begin of block b1 with frame.
parameters: p_file like rlgrap-filename default 'c:/vendor.txt'
obligatory.
parameters: p_file1 like rlgrap-filename default 'c:/xyz.txt'
obligatory.
selection-screen: end of block b1.
*at selection screen.
at selection-screen on value-request for p_file.
perform f4_help using p_file.
at selection-screen on value-request for p_file1.
perform f4_help1 using p_file1.
*start of selection
start-of-selection.
*******uploading file
perform upload_file using p_file P_FILE1.
******open session.
perform populate_data.
*& Form f4_help
form f4_help using p_p_file.
data: l_file type ibipparms-path.
call function 'F4_FILENAME'
importing
file_name = l_file.
p_file = l_file.
endform. " f4_help
*& Form POPULATE_DATA
form populate_data .
DATA: L_STRING TYPE STRing.
DATA: L_COUNTER(2) TYPE n.
loop at it_vendor.
perform bdc_dynpro using 'SAPMF02K' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-D0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_vendor-lifnr.
perform bdc_field using 'RF02K-BUKRS'
it_vendor-bukrs.
perform bdc_field using 'RF02K-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-bankn(03)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
*********bank details
CLEAR l_COUNTER.
LOOP AT IT_BANK WHERE LIFNR = IT_VENDOR-LIFNR.
l_COUNTER = l_COUNTER + 1.
clear l_string.
CONCATENATE 'lfbk-banks(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-banks.
clear l_string.
CONCATENATE 'lfbk-bankl(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankl.
clear l_string.
CONCATENATE 'lfbk-bankn(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankn.
endloop.
******CALL TRANSACTION.
call transaction 'FK02' using it_bdcdata mode 'A'
messages into it_messages.
write:/ sy-subrc.
perform format_messages.
clear it_bdcdata.
refresh it_bdcdata.
endloop.
endform. " POPULATE_DATA
*& Form FORMAT_MESSAGES
form format_messages .
data: l_msg(100).
loop at it_messages.
call function 'FORMAT_MESSAGE'
exporting
id = it_messages-msgid
lang = sy-langu
no = it_messages-msgnr
v1 = it_messages-msgv1
v2 = it_messages-msgv2
v3 = it_messages-msgv3
v4 = it_messages-msgv4
importing
msg = l_msg
exceptions
not_found = 1
others = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
*& Form bdc_dynpro
form bdc_dynpro using value(p_program)
value(p_screen).
it_bdcdata-program = p_program.
it_bdcdata-dynpro = p_screen.
it_bdcdata-dynbegin = 'X'.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
form bdc_field using value(p_fnam)
value(p_fval).
it_bdcdata-fnam = p_fnam.
it_bdcdata-fval = p_fval.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_field
*& Form upload_file
form upload_file using p_p_file
p_p_file1.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_VENDOR
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
*******UPLOADING BANK DETAILS
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE1
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_BANK
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
endform. " upload_file
*& Form f4_help1
-->P_P_FILE1 text
form f4_help1 using p_p_file1.
data:l_file1 type ibipparms-path.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = l_file1.
p_file1 = l_file1.
endform. " f4_help1
http://sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
Sankar

How do I clear the Disco cache on App Server 9.0.4

Can anyone tell me how I can clear the Discoverer cache installed on 9.0.4 Oracle App Server? Can it be done using App Server Control, is there command line syntax I can use?
Thanks
Andy

Hi Andy
I think the only way to get the memory back is to bounce the server. Sorry.
Best wishes
Michael

How do I clear a TextEntry control programati​cally with Lookout 4.0.1?

Similar Messages

Maybe you are looking for

How do I clear a TextEntry control programatically with Lookout 4.0.1?