How do I configure an Airport Extreme base station to receive and distribute a wi-fi network from a broadband wireless router?

I have recenly upgraded my broadband service and now have a wireless router. My old network configuration was a router connected by ethernet cable to an Airport Extreme base station which then broadcast my wireless network (I also had an Airport Express base staion set up as a wi-fi booster elswhere in the house).
I now have two networks (my original network and the new network from the wireless router) and wish to amalgamate these into one.
Ideally I wish to use the Airport Extreme base station as the "remote" booster (I have purchased Powerline adapters for this purpose) but don't know how to configure the Airport Extreme base station in order to to this.
Can you advise on the best set up for this please?
My Mac is running OS X 10.8.2 and the Aiport untility is version 6.1.
Thanks in anticipation.

The AirPort Extreme should be configured to "create a wireless network" with the same WiFi network name, security type (usually WPA2 Personal) and password as your existing router. It should be configured as connection type Ethernet and be in bridge mode.

Similar Messages

Setting up airport extreme base station with Mac and PC

I have an '02 iBook with an airport card installed and an airport extreme base station. my roommate has a PC and has the DSL connection in her room. i want to wirelessly network my iBook via the airport base. how do i do this? (my base was given to me without any manuals/disks etc)

Your Netgear wireless router is your network's base station. Your parent's PC will not be "serving as a base station" - its presence on the network isn't at all relevant to what you want to do.
To connect your G5 to the Netgear wireless router's network - click on your Mac's Airport menu, click on the name of your Netgear wireless router's network (it will appear in the list when you click on the Airport menu), and enter the wireless network password (if applicable) when prompted by the MacOS. That's is - you are connected!

How can I reconfigure an Airport Timecapsule and Airport Extreme Base Station to extend a new Time Capsule 3TB network.

Previously they were configured to be part of a network attached to a cable modem. Now I have a DSL modem. I can get the 3TB Time Capsule tower to be recognized by my AirPort Utility but cannot get the older 2TB Time Capsule and Extreme Base Station to be recognised as wifi extensions of the 3TB Wi-Fi Base Station. This latter base station is set up in Bridge mode and the wifi is switched off on the DSL Modem. I am trying to recreate a home network (I have created a newly named one) and use the Apple products as the wifi routers, leaving the fibre optic-supplied DSL modem to interface with the internet.
I would have thought that I should set-up the 3TB Time Capsule Base Station in DHCP network mode, but trying to do so gives me error messages and renders the network inoperative. Does anyone have any suggestions as to how to get the AirPort utility to recognise the two other devices (Base Stations) as extensions of the main one? I have tried with RJ45 cabel connections to no avail.

First, it would be wise to update your computer to OS X Mavericks. It's just a free update, but it really helps your computer.
Once you've done that, on to the fix.
In Airport Utility, select the old router and click "edit". Click the Wireless tab. Select Off. Click Update, and wait. During the update, you should use your phone to read this, as you may have no wireless for a time.
Once the update is done, click the new Time Capsule and click "edit". Select the wireless tab, and change the Network Mode to "Create a Wireless Network". Choose your name, security and password. Click Update. Once the new Time Capsule is plugged in and wired, you should be able to connect to your network from your laptop.
Back on the old Time Capsule, go to the Wireless Tab and select, "Extend a Wireless Network". Select your network, and click update.
On the Airport Extreme, do the same as the old Time Capsule.
You should be done! Now, you can move your old Time Capsule somewhere else as use it as an extention of your network. And the same with the Airport Extreme. Enjoy your 5TB of network storage!

I BEG of you: How do I replace an Airport Extreme base station with a 4th-generation Time Capsule as the base station?

I'll be damned if I can figure this out. I have a new late-2012 iMac (OS 10.8.3) connecting to my LAN via Airport wi-fi. (It will be Ethernet-connected, as soon as a hole is drilled into my new work table, but right now the Ethernet cable doesn't reach.) My wife uses a 2011 MacBook Air.
The LAN consists of a flying-saucer-looking Airport Extreme connected by Ethernet to the modem, plus 2 old Airport Expresses. I have an Ethernet switch too, through which I've got a TV connected and a printer connected.
I bought a 4th-generation Time Capsule about a year ago, but couldn't figure out for the life of me how to replace the Airport Extreme with it. I became so incredibly frustrated that I hid it away in a closet until now. I just tried again, with the same results. I've got both Airport Utility 5.6 (to use with the old Extreme and Expresses) and Airport Utility 6.2. I was using version 6.2 to set up the Time Capsule... or to try to. Once again, I cannot for the life of me figure out how to do it! I tried so many different Ethernet wiring connections that I now cannot remember them well enough to describe them here.
I distinctly remember that, when I tried this a year ago with my wife's MacBook Air and Airport Utility 6.2, I was presented at one point with the question whether I wanted to replace an existing base station with the Time Capsule I was trying to set up, but this time I never was presented with that option.
Is there anyone who can, in essence, hold my hand and walk me through this process step-by-step? At this point I even need to be instructed what to wire to what. I feel like a total incompetent.
My MOST sincere thanks in advance for help!
(I hope Time Capsule is the correct forum for this question. I considered the Airport forum as well, but I don't want to cross-post.)
(And, just to complicate matters, after I get this done-- assuming I ever do-- I want to use the old Airport Extreme on the outside of the house to extend the range of my LAN to the back yard... but that's for another day entirely.)

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

How do I make my Airport Extreme Base Station stop asking to update?

For awhile my Airport base station has been periodically asking to update its firmware. But since everything is working fine and I've seen reports of windows computers having trouble connecting after stepping up to that version I'd rather leave it be. Is there any way to force it to stop checking/asking? It's a bit annoying that every time I turn on my computer the Airport Utility pops up demanding my attention.

Open AirPort Utility on your Mac and click Manual Setup
Click the Base Station tab/label located just below the row of icons at the top of the window
Click the Options button near the bottom of the window
Remove the check mark next to Check for Firmware Updates on the next window
Click Done, then click Update to save your new settings and allow 25-30 seconds for the AirPort Extreme to restart and power back up

Configuring Apple Airport Extreme base station

My housemate has one of these routers, and I can connect to it with this arch system, but I want to set up a static IP address.
The airport extreme has a gui app available for Mac and PC for changing such settings instead of the usual browser-based antics. I don't have a Mac, and I suspect that the windows application is conflicting a bit with my software
Does anyone know of a way to configure this router through my arch system? Ubuntu had a package for it in synaptic, but I can't find anything in the aur, wiki or forums relating to it.
Thanks guys.

Is no one else using this router? I'm just looking for some tips or starting points to getting it configured. As it is, with my windows laptop knackered, all I have is my housemates mac to use the aiport admin utility with and its a bit of a hassle getting him to fiddle around with the thing until I get it working. It would make life easier if I had some way of setting it up on the arch system.

How to get this Airport Extreme base station to produce a wireless network?

I had this Airport Extreme base station working fine at the house that I moved from a couple of days ago.
After my house move, however, it seems that the AE base station isn't producing a wireless network. My wireless laptop isn't detecting a wireless network. Also, the left hand side light on the AE base station is not lit.
The AE base station was softly cushioned during house the move.
Regarding configuration:
My non-wireless iMac (running 10.3.9) connects to the AE base station via an ethernet cable.
Before my house-move, I regularly connected wirelessly via the AE base station from a couple of wireless-equipped laptop computers.
I was using AE software version 5.6. (In desperation, I have just updated to version 5.7 - but that hasn't improved or changed situation.)
At the new house, I found that I had to reset the AE base station back to factory settings before I could successfully connect to the internet through the AE base station from the (non-wireless) iMac.
Since resetting the AE base station at the new house, I can also print via a USB printer that's plugged into the AE base station.
I just cannot pick up any sign of a wireless network from the AE base station.
G4 Powerbook Mac OS X (10.3.9) Problem started while I had Airport Extreme software v5.6. No improvement/change after v5.7 update.

Sorry for my delay in closing this issue.
I got the wireless network running again - though I'm not sure which of a "litany" of separate actions (which I gleaned from dialogs in several similar postings for similar issues to mine) was the solution. I suspect it was one of the following two actions, which have stuck in memory:
1) I relocated a nearby cordless phone cradle/charger/base-station from alongside the Airport Extreme base station to about seven feet (two meters) away. However, the cordless phone is about eight years old, and I believe its radio frequency is far out of the range that I have read (in similar postings) can interfere with the Airport Extreme base station.
2) I re-set the Airport Extreme base station, (a) by depressing the tiny reset button at the rear of the base station for more than 5 seconds (until the led started blinking), (b) from Utilities/AirPort Admin Utility/Configure/Restart. However, I had reset the Airport Extreme base station those ways previously without that restoring the wireless network. Also, I didn't record the sequence of the multiple resets and the configurations at the times of the resets.

How to disable the wireless section of Airport Extreme Base Station?

Is it possible to disable the wireless section of Airport Extreme Base Station?
It is because I do not want to have any high frequency radio signal which may be dangerous for small baby (no such proof for the moment, however).
Anyone using the new Airport Extreme Base Station please check and help.
Thanks!!

I think you are a little too concerned. Just for the sake of how to, here it is.
go to manual set up, airport, wireless, wireless mode, and then choose off.
good luck.

Problem consistently printing via new (summer 2011) AIRPORT EXTREME BASE STATION and Brother wireless printer (model HL5370DW). What am I doing wrong?

Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
My theories:
- true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
- The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
QUESTIONS:
- Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
- I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
Rule out:
- wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
Any help will be greatly appreciated.
Thanks in advance!

13 ASCII characters = 104 (aka 128)-bit WEP
encryption
If turning off WEP works, then you just need to
provide the cameras with the "Equivalent Network Password".
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain
algorithms to convert simple alphanumeric passwords
(or passphrases) into HEX keys, thus enabling the use
of simple easy to remember WEP password rather than
lengthy HEX keys. The problem is that different
vendors use different algorithms to generate the HEX
key and therefore a ASCII password on an AEBS will be
hashed differently on a non-Apple client and vice
versa.
You may find the following article helpful:
- Apple article, especially the part about
"Third-party client to Airport".
Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
Thanks again for your help and suggestions... I really appreciate it.
geoff

AirPort, older AirPort Extreme Base Station, AirPort Express, Newer AirPort Extreme Base Station

This may sound like a fairly dumb question, but here goes anyway:
I have a 27" iMac with the following AirPort Extreme card:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.14.6
For a Base Station, I'm currently using a pretty long-in-the-tooth M8799LL/A AirPort Extreme Base Station (with modem and antenna port)
I recently bought an Airport Express:
AirPort Express MB321LL/A (A1264) to
A. Use AirTunes to send iTunes from my Man Cave on the first floor at one end of the house to the family room on the first floor at the other, where it will connect to an A/V setup, and, probably, one of my USB printers
B. Act as a repeater for the AirPort Extreme Base Station, which is physically closer to the Man Cave than to the family room. My wife and I use our ancient-but-hangin'-in-there iBook G4s in the family room (and upstairs) to check email, eBay, etc. Both in the family room and especially upstairs, we sometimes get only 2-3 bars on the AirPort signal strength indicator in the menu bar.
I see that I can get, from a well-known third-party retailer, an AirPort Extreme 802.11n A1143 (1st Generation), for an exceptionally reasonable price.
My question is, what would getting the AirPort Extreme 802.11n A1143 do for me, if anything? I know it would give me one more signal source in the repeater chain, and I could probably put the Auld Nyle M8799LL/A in the stairway or upstairs to boost the signal upstairs, and I could use the USB port in the AirPort Extreme A1143 for connecting another USB printer or USB external hard drive (would this drive be available to any Mac on the AirPort network?)
Any other configuration possibilities and suggestions greatly appreciated!
Peace & Love
Bart Brown

Thank you for the prompt reply and the very helpful links. I'm going through all the support docs right now, but from your explanation and what I've seen in the support docs so far, it would appear that the maximum bandwidth is achieved by a physically-connected "Roaming Network."
I'm so out of it, I'm afraid I'd never heard of "Powerline adapters," but I looked them up, and I guess this is the system that uses "Romex" - style standard house wiring to carry signal, which cuts down on each individual Base Station's power overhead (does it also affect bandwidth?).
I see a lot of names selling these adapters -- Western, D-Link, NETGEAR, ZyXEL, Monster, Sling Media, PowerNet, Cisco-Linksys, Actiontec, Medialink, Rosewill, TRENDnet -- and a lot of different configurations: 1 port, 2 ports, 4 ports. Basically I have one 27" iMac that doesn't go anywhere (it's not too portable!), a couple iBook G4s, and a point where I want to run 1/8" mini-jack-to-RCA L/R audio cable from the AirPort Express to an A/V receiver. I doubt this configuration is going to change, as I'm 63, and too lazy to lug stuff around if I don't have to. What do you think would be the best solution for me, considering I just ordered the AEBSn and I already have a brand-new AXn. Should the 27" iMac, since it ain't movin', be connected by ethernet/"Powerline adapter", rather than relying on the internal Airport Extreme card? I guess what I'm asking is, given what I want to do, how many of these Powerline adapters, what kind (do you recommend), with how many ethernet ports do I need?
Thank you again for your prompt and informed help.
Bart Brown

AirPort Extreme Base Station with Modem not recognized by airport utililty,

My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
How can I make it trusted again and get dial up internet to work again?

resetting has worked for months with no return of the problem.

HT4259 Extending AirPort Extreme BASE STATION range

I am using an older (2006) 54Mbps AirPort Extreme Base Station and want to extend the range. I am experiencing issues with dropped or slow signals in rooms that I would consider tough to reach (basement for example). Can I use an AirPort Express to extend the range of the WI-FI and how exactly is this done? Or would I be better off updating the AirPort Extreme Base Station? It's worked flawlessly for 6 years, just have more wireless requirements.
Thank you all in advance.

I am using an older (2006) 54Mbps AirPort Extreme Base Station ... Can I use an AirPort Express to extend the range of the WI-FI and how exactly is this done?
The short answer is yes; the longer answer is that the only way to "wirelessly extend" the range of your 802.11b/g-only Extreme is to create a Wireless Distribution System (WDS).
Not only is a WDS a tedious pain to set up, even for experienced users, its performance is likely to be disappointing. It may not even solve your dropped signals or slow throughput.
There are better ways to extend your wireless range. By far the best and least expensive alternative is to connect an additional base station to your existing Extreme with an Ethernet cable. If you don't want to do that, and you understandably decide against a WDS, then your remaining alternative is to buy a newer, 802.11n capable Extreme or Express. They can use Apple's "extend a wireless network" feature that will eliminate nearly all the disadvantages of a WDS.
Read this to determine how to create a WDS: http://support.apple.com/kb/HT4262

New Mac and Airport Extreme Base Station User - Setup question

Good Morning,
I just received my new MacBook Pro yesterday along with the Airport Extreme Base Station. I was tying to setup the airport extreme but have had no luck. I want to make sure I'm connecting things correctly - make sure I'm not doing something stupid.
I have a cable modem and I previously had a Netgear router. The connection from the cable modem that had previously been connected to my Netgear router - I disconnected it and connected it to the Airport extreme base station instead. And then I plugged it in. Is that all the connecting that I need to do? I get the flashing amber light.
Now I did read a few other threads and it sounds like I may need to install the Airport Utility that came with the base station. So I'll try that when I get home tonight. But I would appreciate any other suggestions - especially whether or not I've connected the airport extreme correctly to my cable modem.
Thanks, Susan
MacBook Pro Mac OS X (10.4)

I want to make sure I'm connecting things correctly
The network configuration should look something like the following:
Cable modem > (Ethernet cable) > [WAN port] AEBSn > (wireless) > MacBook Pro
I have a cable modem and I previously had a Netgear router. The connection from the cable modem that had previously been connected to my Netgear router - I disconnected it and connected it to the Airport extreme base station instead. And then I plugged it in. Is that all the connecting that I need to do? I get the flashing amber light.
Since you changed your network configuration, you should perform a complete power recycle of your network components to allow enough time for them to "synchronize."
Modem/Router Power ReCycling
- Power-off the Cable modem, AirPort Extreme Base Station (AEBSn), & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AEBSn; Wait at least 5 minutes.
- Power-on the computer(s)
Now I did read a few other threads and it sounds like I may need to install the Airport Utility that came with the base station.
Yes, you will need this utility to perform the setup and follow-on administration of the AEBSn.

What's the most recent opinion about Time Machine backups to Hard Drives connected to the USB port on the Airport Extreme Base Station (5th generation)?

I have been searching the Apple communities and Internet for a final answer. I just bought an Airport Extreme Base Station (5th generation) and LaCie d2 quadra 1TB external drive as a replacement for TWO failed Time Capsules, neither of which Apple would replace due to failed power supplies. I formatted the 1TB drive using Disk Utility (Mac OS extended (journaled)) from my MacBook Pro, and then plugged into the Airport Extreme Base Station USB port. The Airport Extreme Base Station see the Hard Drive, and my MacBook Pro sees the Hard Drive in my finder under shared resources. Time Machine, however, does not see the drive. Is there a solution for this problem? If Time Machine will not work, is there another software product out there that will work, like Carbon Copy. Having to plug the backup drive into the USB port of your laptop every evening kind of defeats the purpose of having a laptop. Any suggestions would be appreciated.

Keeping in mind that this is not supported by Apple, I have been successful at doing the following:
1) Format the entire drive (1 Partition) as Mac Extended (Journaled). You must click in Options and set it as a GUID Partition Table (first option)
2) Plug drive via USB to AEBS
3) Using Airport Utility, use Manual Setup, then under Disks, select the new Disk and click File Sharing, then Enable File Sharing and Secured Shared Disks (recommended, of course). Other settings are up to you.
4) IMPORTANT: you will NOT see this Disk in Time Machine until you open Finder and double-click on it. You will not need to do this again (hopefully).
5) Now it should appear in Time Machine. Remember to exclude any large files like Virtual Machines, since they will be re-backed-up (is that a word?) every time it changes in any way.
6) Remember that the first backup (over WiFi) is the longest. Leave the computer alone during this period.
Good luck, and let us all know how it went for you!

Airport extreme base station detecting someone elses network but not mine.

Sorry if this subject has already been discussed but I couldn't see it anywhere.
I have an airport extreme base station set up and it works fine but this morning i noticed that I had very little signal which has never happened before so upon further investigation I noticed that my computer was hooked up to a Netgear network amd not my own usual airport "home" network.
I got my own network back again and my signal is now full strength. The worrying thing is that my computer couldn't seem to find my airport "home" network when I searched for it. I had to start again from scratch and reset it.
Is there a way I can tell my computer to use only my airport network and no other? Someone obviously has an open network nearby.
Message was edited by: lispiers

Try the steps indicated in Mac OS X 10.4 Help: Choosing preferred AirPort networks.

How do I configure an Airport Extreme base station to receive and distribute a wi-fi network from a broadband wireless router?

Similar Messages

Maybe you are looking for