AirPort, older AirPort Extreme Base Station, AirPort Express, Newer AirPort Extreme Base Station
This may sound like a fairly dumb question, but here goes anyway:
I have a 27" iMac with the following AirPort Extreme card:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.14.6
For a Base Station, I'm currently using a pretty long-in-the-tooth M8799LL/A AirPort Extreme Base Station (with modem and antenna port)
I recently bought an Airport Express:
AirPort Express MB321LL/A (A1264) to
A. Use AirTunes to send iTunes from my Man Cave on the first floor at one end of the house to the family room on the first floor at the other, where it will connect to an A/V setup, and, probably, one of my USB printers
B. Act as a repeater for the AirPort Extreme Base Station, which is physically closer to the Man Cave than to the family room. My wife and I use our ancient-but-hangin'-in-there iBook G4s in the family room (and upstairs) to check email, eBay, etc. Both in the family room and especially upstairs, we sometimes get only 2-3 bars on the AirPort signal strength indicator in the menu bar.
I see that I can get, from a well-known third-party retailer, an AirPort Extreme 802.11n A1143 (1st Generation), for an exceptionally reasonable price.
My question is, what would getting the AirPort Extreme 802.11n A1143 do for me, if anything? I know it would give me one more signal source in the repeater chain, and I could probably put the Auld Nyle M8799LL/A in the stairway or upstairs to boost the signal upstairs, and I could use the USB port in the AirPort Extreme A1143 for connecting another USB printer or USB external hard drive (would this drive be available to any Mac on the AirPort network?)
Any other configuration possibilities and suggestions greatly appreciated!
Peace & Love
Bart Brown
Thank you for the prompt reply and the very helpful links. I'm going through all the support docs right now, but from your explanation and what I've seen in the support docs so far, it would appear that the maximum bandwidth is achieved by a physically-connected "Roaming Network."
I'm so out of it, I'm afraid I'd never heard of "Powerline adapters," but I looked them up, and I guess this is the system that uses "Romex" - style standard house wiring to carry signal, which cuts down on each individual Base Station's power overhead (does it also affect bandwidth?).
I see a lot of names selling these adapters -- Western, D-Link, NETGEAR, ZyXEL, Monster, Sling Media, PowerNet, Cisco-Linksys, Actiontec, Medialink, Rosewill, TRENDnet -- and a lot of different configurations: 1 port, 2 ports, 4 ports. Basically I have one 27" iMac that doesn't go anywhere (it's not too portable!), a couple iBook G4s, and a point where I want to run 1/8" mini-jack-to-RCA L/R audio cable from the AirPort Express to an A/V receiver. I doubt this configuration is going to change, as I'm 63, and too lazy to lug stuff around if I don't have to. What do you think would be the best solution for me, considering I just ordered the AEBSn and I already have a brand-new AXn. Should the 27" iMac, since it ain't movin', be connected by ethernet/"Powerline adapter", rather than relying on the internal Airport Extreme card? I guess what I'm asking is, given what I want to do, how many of these Powerline adapters, what kind (do you recommend), with how many ethernet ports do I need?
Thank you again for your prompt and informed help.
Bart Brown
Similar Messages
-
Living in an apartment, here it has only wireless (no wired cable in the room) signal using for the internet connection. I've an airport express (new) ,so how can I do for extending signal (wireless) for using in myroom. because the wireless signal is so weak.
Unfortunately, you won't be able to. In order to do so, you would have to configure both the AirPort Express and the other wireless router for a WDS. Since it will unlikely that the other router is another AirPort, nor will you have the ability to administer it, you won't be able to get this accomplished.
-
My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Setting>:General>Reset>Reset Network Settings.
- iOS: Troubleshooting Wi-Fi networks and connections -
We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.
Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?
-
I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please
I cannot for the life of me figure this out.What you need to do is connect your phone to iTunes but do not click sync. Go to File at the top and click transfer purchases from phone, that'll put all your apps into iTunes. When it's done transferring, locate your phone on the sidebar and click it. Then find the apps option above the picture of your iphone, you can select which apps you want or don't want on your phone. After selecting your apps then you can sync. Once you do this you should never have your problem anymore.
-
I am trying to do a migration transfer from an older Mac Pro, running Leopard, to a newer Mac Pro, running Lion. There is a step that asks for a "passcode" to proceed. I have no idea what that passcode is. It seems to want a numeric code. Has anyone had this experience?
This general-purpose article gives detailed step-by-step instructions for using Migration assistant, Setup Assistant, and other mehtods, and discusses the Pros and cons of each mtheod. It is very approachable and easy to understand. Wriiten by Pondini, the resident Time Machine guru.
Setting-up a new Mac from an old one, its backups, or a PC -
I am trying to move my Acrobat 9 Pro Extended from my older HP Win7 Pro notebook to my new HP Win 7
I am trying to move my Acrobat 9 Pro Extended from my older HP Win7 Pro notebook to my new HP Win 7 Pro notebook. This should be WAY easy, and it's not. Sofware downloaded from MS/HP after new noteboook was safely home. Used Microsoft transfersoftware to move all--but the Adobe Night watchman won't recognize my product code (it worked on the older notebook). I have now recopied the irginal download and everything seems fine but the IE plug-in to Adobe PDF printer does not function. Any suggestions?
You won't like this response, but there is no way to simply move any Adobe software installation from one system to another. In part, this has to do with the registration/activation infrastructure that Adobe uses. FWIW, Adobe isn't the only software vendor for which you can't simply move software from one system to another via various migration tools.
You must totally uninstall from the first system including product deactivation and then install on the new system and reactivate.
In terms of “fixing” your current system, I would recommend totally uninstalling the software (and deactivating in the process), reboot, and then reinstall from scratch.
- Dov -
Is there a way to adapt an older ipod with 30-pin to a new dock with lightning connector?
Is there a way to adapt an older ipod with 30-pin to a new dock with lightning connector?
The Apple on-line store has two 30-pin to lightning adapters, but they are the wrong direction from what you want. Try a Google search, or drop in an Apple retail store and see if they have what you need.
-
Cannot select a music into slideshow and book slideshow presentations. In the older Mac this was easy. With new Mac OS X 10.6.8 it should work as I can stop the slideshow with cursor but pop up window for choosing music is dead. I cannot drag music into it. Preselected music just goes on.
I am talking about iPhoto. In my old Mac even in Books choosing slideshow gives a pop up where you can select a music from I tunes library. In this new one I can stop the slideshow with cursor and it shows music option but it is, as I said dead. Does not response at all to commands.
-
March 20, 2013
I have a new iMac using Pages and Microsoft Word, Excel, etc. for mac. I'd like to transfer older ClarisWorks and AppleWorks files to my new computer. Can this be done?Additionally, Numbers can read/open spreadsheets. However, anything done in the drawing/painting part cannot be read by any application - you would have to export those (on the old machine) as a .jpg or pdf. You could then open them, but no longer edit or change the content.
-
Install older version of Photoshop and keep the new one
Hi,
I use PS CC 2014 and I encountered some issues with it.
I want to reinstall PS CC (1 version older than what i currently have) and keep both versions.
Is it safe to install the older version and still keep the older one?
Will it not overwrite newer files? Will it overwrite my new settings?
e.g. will it overwrite the ACR version?
Thank youFirefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
He query expression 'new f__AnonymousType1 is not supported.
he query expression 'new <>f__AnonymousType1`1(PercentComplete = s.PercentComplete)' is not supported.
error message in project server 2013 using object model.
vijayhe query expression 'new <>f__AnonymousType1`1(PercentComplete = s.PercentComplete)' is not supported.
error message in project server 2013 using object model.
vijay -
I have an iPod whose contents I want to transfer to a newer Ipod. At some stage when I thought I was syncing correctly I wasn't so I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again?
Have you not got a backup of your content on, for example, external drives ? If not then you could have a look to see if any of the utilities mentioned in this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893
-
I had bookmarks on an older computer. When I got my new one my husband took over the old one and deleted firefox before I had a chance to get my bookmarks. Is there anyway to find all those bookmarks I had?
Hopefully he didn't delete the Firefox Profile folder. <br />
http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile -
Can you retrieve ringtones that you bought on an older iphone whenever you upgrade to a newer iphone?
If you have bought your ringtones and synced to your computer, you should have a copy in the Tones library that you can sync to your new iPhone.
Unfortunately, you cannot redownload your ringtones from iTunes store as it is not treated as fair use rule that is applied to regular music.
Maybe you are looking for
-
Error opening PDF (ADS) in https mode. Works fine in HTTP
Hi, We are running a application on NW 7.01 which basically opens a pdf document (ADS). the pdf document is opening fine when we run it from NWDS / in HTTP mode. But throws this error when run on the portal which uses HTTPS. We have configured HTTPS
-
Samsung note II, known issue of aol mail not being received on phone
I spent hours on the phone with Customer Service this past Wednesday & Thursday because my aol mail is not being received on my new phone. I just did some research online, and found out this has been an issue with AOL and Verizon since December 2012.
-
Ultrasearch problems with Frames
I am having problems with Ultrasearch crawling pager with frames. When my ultrasearch crawler encounters a page with frames it does not crawl any of the frames. Is this because it is looking for an <a href> tag to follow or is there something I am mi
-
Hi All, We are facing strange problem in LSO in displaying the course catalog properly for all users. We are using mySAPERP 2005 (ECC 6.0) SP11. LSO 600 FE, We are using structural authorization profiles in the R/3. The catalog was displaying the cat
-
Adjustment brush differences in 3.x?
Is it just my imagination, or did the behavior of adjustment brushes change in 3.0? If my memory's correct, the adjustment brush in 2.x painted the adjustment at the set density, etc. and that was it. Continuing to use the same brush in the same area