How do I connect my Bose Cinemate GS Series ii speakers to Airport Express?

You can connect the Bose to the AirPort Express with either a digital optical or analog audio cable. For best sound I would recommend the digital connection.
Your Bose speakers should already come with a digital optical audio cable with TOSlink connectors on either end. Either get a 3.5 mm to TOSlink adapter for the end that you will connect to the Express' audio port or get another cable with a 3.5 mm connector on one end and a TOSlink connector on the other. An example could be seen here.

Similar Messages

Using Bose system to drive remote speakers via Airport Express / iTunes

I want to connect my Airport Express which is configured for remote speakers in iTunes to my Bose system. My question is which input on the Bose Lifestyle 50 system do I use; ie which input on the "multi-room interface" do I connect to the AE. I think it must be the "aux" but before I buy a suitable cable I would like to be sure.

Use a mini-jack to double RCA. That is all that I used. In the past I have used my APExpress and used the audio out port and all I needed was a mini-jack to double RCA.I have a TV, and a DVD player interfaced through my Denon AVR driving Bose Acoustimass 10 speakers.
MJ

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

Bridge the TC.. plug it into the AEBS with ethernet.

How do I connect my MacBookPro to my external amp/speakers.

How do I connect my MacBookPro to my external amp/speakers.
There's is no choice in sys pref to choose LINE OUT, only INTERNAL SPEAKERS.

The headphone jack is your combo headphone/line out. You use a mini plug on the MBP end and, depending on your external amp/speakers, either a mini jack or a pair of RCA jacks.
PS. Your OS X level can't be 10.3.7 ... MacBook Pro's were first delivered with OS X Tiger 10.4.

How can i print my files from mi iphone 5 throught the airport express?

How can i print my files from mi iphone 5 throught the airport express?? i have the last iOS version installed and also the last firmware version of the printer. the printer is already connected to the USB airport express and when i look for printers in airprinter there is no printer found. i have an HP LASERJET P1606dn(i think that is supported by the airprinter).

In order to function with AirPrint, a printer must connect to the network wirelessly.
Even if you have an AirPrint compatible printer, iOS devices will not be able to print to the printer when it is connected via USB.
So, you have two options:
1) Reconfigure the printer to connect to the network using wireless only and the iOS devices should be able to print that way....assuming that you have up to date drivers for the printer installed.
2) Leave the printer connected via USB and then use a third party App like Printopia installed on your Mac as a "workaround" to (hopefully) allow the iOS to device to be able to print. If you want to give this a try, there is a free trial for Printopia, so you will know if it will work before you buy. You must have a Mac running on the network in order for Printopia to function correctly.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

HT4587 How do you read the Serial Number on the back of the Airport Express? It is sop small and silver writing on hite background?

How do you read the Serial Number on the back of the Airport Express? It is sop small and silver writing on white background?

http://support.apple.com/kb/ht3546

Can you connect an iMac to a Lynksys router without an airport express

can you connect an iMac to a Lynksys router without an airport express or base? I tried running it from cable>modem> wireless router and it doesn't sling to the iMac. The airport card in the Mac does seem to be on, and there is a network connection set up. It's an intel iMac7,1. I'm not familiar with Mac, I'm trying to help out a friend.
At my house I have the same configuration going from my PC to an old Mac laptop and it works fine.
I think my friend had her wifi network set up properly, or it wouldn't be showing in the list of networks when I check.
the router is a Lynksys WRT160N V3.
Oh, and if I do run her computer trying to use the wireless, I don't get an internet connection at all. I have to have it hardwired straight to the modem.
Sorry I've asked this twice, but I haven't had any luck. I must just not know where to find things on the Mac. I did try other places in forum before posting again.
Any ideas? Thanks

We don't know a thing about your iMac or what version of OS X it's running so it's very difficult to help you. Please note that information and also please complete your profile, then that infomation will be listed when you post in your next thread. You can complete your profile by clicking Your Stuff in the upper right of this page then click Profile and fill in the pertinent information.

Can you connect an iMac to a Lynksys router without an airport express or base?

can you connect an iMac to a Lynksys router without an airport express or base? I tried running it from cable>modem>router and it doesn't sling to the iMac. The airport card in the Mac does seem to be on, and there is a network connection set up. It's an intel iMac7,1.
At my house I have the same configuration going to an old Mac laptop and it works fine.
Any ideas? Thanks

Csound1--
If you mean does the network appear on the Mac when I look for it, then yes.
I think my friend had her wifi network set up properly, or it wouldn't be showing in the list of networks when I check.
the router is a Lynksys WRT160N V3.
I don't think she has the security code so I can check what's actually hooked up (the network name on screen at least appears to be locked). She's had the computer out to the shop and back recently and has never even run anything off the wireless.
I have a feeling I'm going to have to call her cable provider to sort it out. I'm hoping to avoid that. I don't know Mac at all. I could troubleshoot on my PC.
Ultimately, I want to be able to hook a Roku box to her TV to run Netflix.
Any help would be greatly appreciated.

How can i connect my hp photosmat d110 series scanner to my computer

I need help immediately on how to connect my scanner to my computer both desk & laptop

Hi,
How do you connect it now ? Can you print ? What is the Operating system on your computers ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to connect to multiple speakers using Airport Express

Hi -- I have two AP Express modules setup and working in my household. I have no problems using either from my iBook G4.
How do I use them both at the same time? I cannot find an appropriate way to set this up?

Welcome to Apple Discussions
Since you are at 10.4.7, I'm assuming iTunes is at least 6.0.2. If not, upgrade the app via Software Update or Apple's iTunes site to the latest v 6.0.5.
Since both units work individually, I'd say the problem lies in how the 2 units are configured. Are you using the latest 6.3 firmware for Airport express? To determine your version, download the firmware, select install. The ensuing panel will tell you the latest version for your units. Upgrade if you are using an earlier version of the firmware.
Post back with results.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.7) LaCie 160gb d2 HD Canon i960 printer

Cannot connect to remote speakers using Airport Express

Yesterday I was able to connect to my hi-fi using remote speakers in iTunes 6.0.4 through my Airport Express (AE) and take full advantage of Front Row, however later in the day the speaker selecton pop-button in iTunes disappeared. I did a hard-reset of the AE unit, shutdown the computer, checked the preferences selection in iTunes etc, all without success. I checked the discussion boards of both iTunes and Airport for a solution. Found something interested where someone said that they shutdown the computer and went to bed and in the morning, hey presto everything was working. He thought that having a good night's sleep was the solution. So, I shutdown the computer and went to bed. The next morning, the light on the AE was green and after booting up my iMac Intel the pop-button reappeared (I still don't know what solved the problem) but now it will not connect to the speakers. It tries but gives us after 30 seconds or so.
Here is what I have done so far: I used Airport setup assistant to set up the AE. During that process I selected to join an existing network that is provided by my Airport Extreme base station and I selected to only use the AE to share a printer and play iTunes using WDS bridging. This process works every time.
Right now, the light on the AE unit is flashing amber. In Airport Admin Utility both the Extreme and the Express are listed but the Extreme has an IP address of the 10.0.x.x variety whereas the Express has an IP address 169.254.x.x variety! Strange. If I double-click on the Express it takes an age to get a response and when the response eventually comes - asking for the password I then get an error saying that "the airport admin utility was unable to read the configuration of the selected base station.
I have tried resetting and repeating the above without success. Therefore, any other ideas or help would be greatly appreciated. I want to boast about Front Row to my Windows friends without the embarrassment of connection problems

I am having almost exactly the same trouble with an Airport network I recently set up in my home. I have a G5 with a brand new Airport card, an Airport Extreme Base Station (also brand new) in the same room acting as my internet portal, and an Airport Express (yup--brand new) downstairs piping iTunes to the stereo.
I could get the G5 and Extreme base to talk without a hitch--they are right next to one another, after all. When I tried to link the Express into the same network, the Express vanishes. When I tried moving it into the same room with the Extreme, I could find it, and play tunes through a set of headphones. Moving to an outlet in the hall outside the room, it still worked. Moved to an outlet on the far wall of the room across the hall, it would play only sporadically, dropping out about 4 seconds out of every six. Anywhere else, and it wouldn't show up at all.
However, when I set up the Express to be a separate network, my G5 was able to access it and play music without difficulty, anywhere in the house. I've been playing iTunes on my stereo for weeks, with the downside that I can't do that and surf the web at the same time.
Last night I tried the experiment of moving the Extreme Base Station around. With my G5 in the living room, in the approximate center of the house (1/2-level above the basement, 1/2-level below the office--it's a split level), I was able to access the Express and play tunes on the stereo as usual. With the Extreme Base downstairs, right next to the Express, my G5 could not even locate its signal. Fifteen feet closer to the center of the house (but still downstairs): couldn't find it. At the base of the stairs: couldn't find it. At the top of the stairs (20 feet from the G5, but just around a corner): couldn't find it. Three feet out into the foyer at the top of the stairs (and now in a direct line of sight to the G5): 20-30% signal. Keep in mind that during all this, I could switch over to the Express network at will (75% signal) and play music downstairs without a hiccup.
It seems to me that there's something wrong with the Extreme Station itself (or at least, with the way it's trying to communicate). If it were external interference due to an outside network, a microwave oven, or a 2.4 GHz cordless telephone, I would expect it to effect both networks equally--but it isn't. The Express seems impervious. I've noticed in another set of posts that some people with wireless connection problems have found that switching from the most recent version of the Extreme Base firmware (5.7) to an older one (5.5.1) has fixed the problem. I plan to give it a shot myself. I'll let you know how it turns out.
Dual 2.5 GHz G5 Mac OS X (10.3.9)

How can I expand my wireless network with a Time Capsule and Airport Express?

My entire house is wired for ethernet access (2 floors). I have a Time Capsule on the 2nd floor that reaches the entire house except for one room.
In this one room I have an ethernet port plugged into an Airport Express.
The problem I encounter is that I have two separate wifi networks with two separate names. I realize I can extend the wireless network on the 2nd floor to the 1st floor but I can only do this wirelessly to my knowledge, and the entire problem is that the signal doesn't reach the front room. Also, there is really no place in-between that the AE can be placed to extend the reach. The building is concrete and steel, I think that has a lot to do with the problem.
My question is: Can I have two wireless routers (connected to the same home network via ethernet) broadcast the same wifi network? I also have a SONOS system that further complicates things, I'm afraid. Would it help if I drew some sort of diagram?
Thanks!

Your network is not working as you describe.. or I have misunderstood the layout..
What is the broadband type? Modem is where? What is the main router?
From your screen shots the main router is the airport express that covers one room which seems wrong.
Why isn't the TC the main router? or both bridged.. if you go back and look at the apple document.. one or both apple routers are in bridge mode..
You are having issues with setup .. half of which is caused by v6 airport utility.
What OS are you running? Please install 5.6 utility.. do it.. do it now!!
Easy for Lion.
http://support.apple.com/kb/DL1482
Messy but possible for ML.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Bose companion 2 speakers with airport express?

Will these speakers work with airport express? Do I need any additional wires?
http://store.apple.com/uk/product/H0832B/A?fnode=MTY1NDA0MA&mco=MTkzMTk5NzE

Either the Bose or JBL will work fine and both are supplied with the audio cables that you will need to connect to the AirPort Express.

How do I turn on my Remote Speakers via Airport Express

I have a remote speaker set up thru my Airport Express wireless system - - However, I don't see where I access that speaker through my ITunes program on my IMAC. Would appreciate your help

Try this:
Make sure IOS is updated to latest version
(How to update your iOS device
http://support.apple.com/kb/HT4623)
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766

Connecting a new HP computer with Windows 7 to Airport Express.

I have an AirPort Express set up with my home network, base station is configured on my IMAC. Now I have a new HP PC with Windows 7 for work, and I'm having trouble getting it to connect to the AirPort Express.
It asks for a "Security Key", and nothing in the literature or on the hardware seems to match that. I've tried every number sent with the Airport (ethernet ID, AirPort ID) but nothing works. Can someone provide advice on how to get this to work?
thanks,
Kevin

It is unlikely that the very long security "key" will solve your issue with the PC, but you never know.... it might be worth a try.
Open AirPort Utility, select the AirPort Express and click Manual Setup
Ignoring the window in the center of the screen, look way, way up to the top of the computer screen where the Help, AirPort Utility, Window, etc menus are located.
Click the Base Station menu
Click Equivalent Network Password password and your "key" will appear.

How do I connect my Bose Cinemate GS Series ii speakers to Airport Express?

Similar Messages

Maybe you are looking for