How do I continue the number sequence after changing to bullets?

I have a numbered list of several items, then several items with a leading bullet.  I would now like to contiue the list with the next item a numbered item that begins with the number following the last number item in the list.

Version 5.2 the latest.

Similar Messages

  • How do you remove the number sequence when exporting layer comps to files? CS6. Windows 8.

    Hi
    I remember in CS5 there was a script you could change, but I can't remember what it was called or where it was saved.  Can anyone help please?
    I would like to stop Photoshop automatically adding a number prefix to exported layer comps.
    Thanks

    So I've found a bit in the script that I think might be it (below).  Can I remove that whole bit?  Or would changing the 4 to a 0 do the trick (I tried and it didn't do anything)... Sorry, but I'm not a coder so don't really know if I'm barking up the wrong tree or not.
    Thanks
    for ( compsIndex = 0; compsIndex < compsCount; compsIndex++ ) {
                    var compRef = docRef.layerComps[ compsIndex ];
                    if (exportInfo.selectionOnly && !compRef.selected) continue; // selected only
                    compRef.apply();
                    var duppedDocument = app.activeDocument.duplicate();
                    var fileNameBody = exportInfo.fileNamePrefix;
                    fileNameBody += "_" + zeroSuppress(compsIndex, 4);
                    fileNameBody += "_" + compRef.name;
                    if (null != compRef.comment)    fileNameBody += "_" + compRef.comment;
                    fileNameBody = fileNameBody.replace(/[:\/\\*\?\"\<\>\|\\\r\\\n]/g, "_");  // '/\:*?"<>|\r\n' -> '_'
                    if (fileNameBody.length > 120) fileNameBody = fileNameBody.substring(0,120);
                    saveFile(duppedDocument, fileNameBody, exportInfo);
                    duppedDocument.close(SaveOptions.DONOTSAVECHANGES);

  • How to pick up the 3d model after change the picture control to the Opengl control?

    Colleagues,
    I have a problem when I use the cvi.I need to draw a 3D model use the opengl in the picture control,and pick up the mode.For example,I transfer the picture control to the Opengl control,then draw a cube and sphere by Opengl。And I want to pick up them。Such as,when mouse click the cube,it will show a MessagbBox("a cube");when mouse click the sphere,it will show a MessagbBox("a sphere");But it doesn't work.
    I'm a chinese student and juse begin to learm the cvi.And my English isn't very good.I don't know whether the problem has been clear.Anyone can help me?

    I haven't used the OpenGL CVI addition for years, but IIRC there is (was?)
    no callback associated to it. Meaning that some actions are defined within
    the OpenGL control, such as rotation/zoom, but that's it.
    Guillaume Dargaud
    http://www.gdargaud.net/

  • How do I remove a number sequence using batch rename

    Hi
    I know I've done this in the past but cannot seem to work it out today.
    I have a series of images "_####_[layercompName].png".  I would like to remove the underscores and numbers.  The underscores removal is easy, but how do I remove the numbers (####) when they are different for each filename?  I would like the end result to be [layercompName].png
    The reason I have these filenames in the first place is that I have run the photoshop script "layer comps to files", and this adds a number sequence prefix.  I have tried to alter the script following various instructions I've found from trawling the internet (this one included How do you remove the number sequence when exporting layer comps to files? CS6. Windows 8.) but without any luck.  So now I'm resorting to batch renaming in Bridge.
    Thanks!

    Here you go, taken straight from: DesignEasy: How to Remove Sequence Numbers and Empty Spaces When Exporting Layers and Layer Comps
    Run Adobe Bridge and navigate to the folder with exported files.
    Select all files which have sequence numbers.
    Go to Tools > Batch Rename.
    Choose: String Substitution from the first drop-down list in New Filenamessection. From the second drop-down choose: Original Filename. In the Find: text field type: _\d{4}_ (underscore, backslash, letter d, open bracket, number four, closed bracket, underscore). Leave Replace with: text field blank. Ensure that you have Replace All and Use Regular Expression checked as shown on the screenshot below.
    Click on the Preview button in the top right corner and ensure that files will be renamed as you want.
    Click on Rename button and you are done.
    In case you are first time doing this and you still have doubts if everything will work as expected, check Copy to other folder option when renaming files. This option is located near the top left corner under: Destination Folder.
    Another thing I want to mention is to remove everything that you have below String Substitution options. In case you see additional renaming options just click on minus (-) sign on the right side to remove them.
    How to remove/substitute empty spaces in the file name using Adobe Bridge
    It is pretty similar process. The only difference is that you should type: \s (backslash followed with letter s) in the Find: text field. You can leave Replace with: text field blank or to type underscore.

  • How do I reset the number of activations on Visio 2003 after getting a "too many activations" message?

    I just installed Visio 2003 on a PC, and got the "we can't activate this app via the internet because you've installed it too many times" message. I went back to phone activation, but, of course, that's no longer available for this product.
    How do I get the number of activations reset? Apparently you used to be able to do this by calling Microsoft, but what's the number to call? Or is there another way to do it?
    I'm probably going to need to do it for my copy of Office 2003 also.

    Hi,
    Microsoft has ended support for Office 2003 on April 8, 2014. This change will affect your software updates and security options.
    Please contact your local customer service. Explain to the service (Human being) that you can’t activate Visio 2003 and the error message is “we can't
    activate this app via the internet because you've installed it too many times”.
    You can find
    your local custom support number on the link below.http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
    Hope it can be helpful.

  • HT2729 I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

    I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

    you can do this by keeping the external hard drive connected and doing the following
    -hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
    -select choose library, iTunes should bring up your explorer windows where you can search for the external HD
    -after you find the external HD find the iTunes folder you just copied to it
    -after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
    -double click the database file and boom iTunes should load your library without having to copy it to the computer
    PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
    double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
    hope this helps:)

  • How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

    How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

    After the discovery reported above, I filed this report :
    Bug ID# 10073038
    Summary:
    When Numbers is used on a system with decimal comma a csv file may be good AND wrong
    Steps to Reproduce:
    With Numbers v2, you introduced an interesting enhancement.
    In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
    In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
    This said.
    (1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
    (2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
    Expected Results:
    Every normally constituted user assume that in
    case (1) he will get a perfectly built table
    case (2) he will get every cells of a row in a single cell
    Actual Results:
    In fact you forgot the drag and drop way of use and in
    case (1) every values separated by semi-colon are inserted in a single cell
    case (2) values separated by comma are correctly spread in a table
    isn’t it ridiculous ?
    Regression:
    Except looking in  QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
    or
    to replace the commas by TABs and the decimal periods by commas
    Notes:
    While I am on this subject, I wish to make two proposals:
    (1)  It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
    Doing that, dates would be imported correctly in every countries.
    At this time, on an English system, you export as mm/dd/year.
    If the doc is open on a system using the format dd/mm/year, the results will be odd.
    On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
    As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
    (2) It would be fine to add the format Tab Separated Values in the Export pane.
    TSV + ISO date format would give documents opening flawlessly everywhere.
    Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    Hello,
    I apologize for submitting this question.  Soon after I posted it I saw a similar question that had my answer..
    Again, my bad for not looking first.
    Ron Morris

  • How can I set the number of test sockets in my program?

    How can I set the number of test sockets in my program? I use LabWindows/CVI  6 and TestStand version 2.0.
    And I use BatchModel for the parallel UUT running. I didn't found program way to set the number of test socket. I think I should have it. In TestStand I can change the number of test sockets through menu Configure -> Model Options -> number of test sockets (I mean I do it by manual mode).
    Thank's a lot.
    Maria

    One way you can set the number of Test Sockets for your sequence is by overiding the ModelOptions Callback used by your sequence. Select All Sequences from the View drop-down then right click, select Sequence File Callbacks, select the ModelOptions callback and then click on Add. You can then select the Edit button to Edit the ModelOptions for your sequence. You can set other ModelOptions as required also.
    RG

  • HT1689 How can I extend the number of times my phone rings before going to answerphone

    How can I extend the number of times my Iphone 4s rings before it goes to answerphone

    Call you carrier and ask them how you can change this.  The number of rings before voicemail kicks in is set by your carrier.  Some have the option to do it from your phone if you know the sequence of codes to send, but you need to ask your own carrier how to do it for their system.

  • How can i retain the trailing zeroes after decimal

    how can i retain the trailling zeros after decimal?
    values are showing in table like( 4.50,5.00) but i am trying to do some processing with these values then ithe zeroes are truncated like (4.5,5),
    how can i get values with zeroes

    If the values in the table have trailing zeroes, it's a character type column.
    Once you perform operations on them, they're implicitely converted to the number type, hence "losing" trailing zeroes.
    To get the trailing zeroes back, you have to convert them back to character data:
    TO_CHAR(1.5*3, '90d99')Have fun,
    K.

  • TS4036 How do i continue the icloud restore on my iphone, it has stopped when my wifi failed ?

    How do i continue the icloud restore on my iphone, it has stopped when my wifi failed ?

    Either it will continue on it's own after a while, once wifi is up or you may have to start it again.
    Chances to continue on it's own are more if you started restore less then 48 hours ago.

  • 8330 Call Forwarding​...How do I set the number of rings before calls are forwarded?

    8330 Call Forwarding...How do I set the number of rings before calls are forwarded? Right now it instantly forwards my calls but I don't want that. I want to change it so that let's say that if after 5 rings I don't answer the call is forwarded. I've looked everywhere for an answer but have had no luck. Any help would be appreciated. I am with Virgin Mobile if this makes a difference.
    Thank you 
    Message Edited by 8WDDdotcom on 08-01-2009 02:39 PM
    Message Edited by 8WDDdotcom on 08-01-2009 02:44 PM

    Well, call forwarding is a feature provided by your carrier -- it is not a function of the device. However it works for your carrier is how it works. Actually, from what I understand about call forwarding, it normally is an all-or-nothing circumstance...calls forward to the number you've asked them to be forwarded to, keeping you in a DND status. Regardless, though, if your carrier tells you how it works on their system, there's nothing that the device can do to override that. Unless there is some kind of 3rd party app that would do it, bypassing (somehow) the carrier network CF feature...but I've never heard of such a thing.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • FAQ: How do I choose the right sequence settings?

    In general, the settings of a sequence should match those of the primary footage type in the sequence. Though Premiere Pro can mix footage of various types in a sequence and compensate for differences in characteristics, performance and quality are maximized when such conversions are avoided.
    See this video for more information:
    How do I choose the right sequence settings?
    Also see these sections in Premiere Pro Help:
    Create a sequence
    Sequence presets and settings

    Sorry to say this - but you've got the wrong advice from Adobe.
    You were right in selecting the profile for Epson premium glossy paper - if that's what you are printing on.
    The magenta cast is most probably due to double color management, i.e. color management for your printer was not switched off. You did all the right moves , but still the color management for the printer was not switched off. This seems to be an Epson - Lightroom problem. You are about the fourth poster who has this problem with Lightroom and Epson printers. All of them said that they were sure that they had color management by the Epson printer switched off. There seems to be a hidden setting that prevails or is called by Lr.
    The magenta cast is typical for double color management.
    Read this - maybe it helps: http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html#display_calibration
    Don't miss the section on  "How to print images from Lightroom".
    I don't have an Epson printer so can't give you further insight on this. Except ...
    Disable - temporarily - all custom print profiles and templates that you may have created. Move them to a different folder where Lr does not find them. I cannot guarantee that this helps but if the problem persists it might be worth a try.
    One of the above mentioned posters said that the problem disappeared after disabling an old print preset that he had created for a prior version of Lr.

  • How can I format the number in ?shape-text:

    Hi All,
    I am using shapes in the rtf template. I need to format the number which is used in the shape as
    <?shape-text:mytagname?>
    now mytagname has inconsistent values in the xml like 3, 4.5, 3.55. I want to format this to two digits after decimal i.e 0.00 format.
    How can I format the number in <?shape-text: ???
    Regards,
    Amit Deshpande
    Persistent Systems Ltd

    Hi Amit,
    <?shape-text:format-number(4.5,'#,##0.00')?>

Maybe you are looking for