How do I create a email notification when a user hits the submit?

I have created a form that inserts a record in the
database using ASP. Now I would like to be notified when some
one fills out the form and submits it.

Forms to Go from Bebosoft (script generating software)
http://www.bebosoft.com/products/formstogo/overview/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

How long is a thread in use when modem user hits servlet? (repost from misc group)

I'm developing an application that will go out to many users on the
internet. Most will be using modems and so my data center will have to
trickle packets to them because of their low modem bandwidth. Each
transaction is short lived, under 100ms, but I'm concerned that the
execution thread in weblogic will be tied up for several seconds while the
data served is tricked down over the modem.
- Is the weblogic execution thread returned when a servlet call returns, or
only when the stream back through the web server has been emptyied?
- Will in fact calls to write to the output stream (or flushes at least) of
the servlet block until the TCPIP stack returns with data sent OK - ie block
until all the data is sent over the modem?
- If I use buffered output streams with large enough buffers to hold all
served data, and don't flush them before returning with the servlet call,
what does weblogic do? Will weblogic hold the execution thread until it can
empty the buffer, hence be delayed by the modem?
- Does putting netscape enterprise server between weblogic and the client
fix this - will enterprise server buffer the data?
- Does setting keep alive in weblogic or enterprise server have any effect
on this problem?
Thanks.
Mark Johnson
Markj
Mark Johnson.
Encirq Corporation, San Francisco CA, (415)284-9800x116
http://www.encirq.com/ [email protected]
The information contained in this message is CONFIDENTIAL. It is intended
only to be read by the individual or entity named above or their designee.
If the reader of this message is not the intended recipient, you are on
notice that any distribution of this message, in any form, is strictly
prohibited. If you have received this message in error, please immediately
notify the sender and/or Encirq Corporation by telephone at 415-284-9800 and
delete or destroy any copy of this message.

Thanks for your reply!!!
jwenting wrote:
no, your code is NOT correct.
It doesn't "upload" anything, as I stated before.It is working perfectly fine if the destination folder is connected to the server machine (which is not the case now).
>
Look into multipart MIME requests, Jakarta Commons File Upload, and things like that to actually upload files to a server instead of insisting on reading them directly from the client's filesystem in your servlet and wondering why that doesn't work if the servlet container is running on a different computer from the client.I AM using Jakarta Commons File Upload. The problem is when I try to access the destination folder(which is in client machine), it can't find as it is searching for the corresponding folder in the server.
>
Unless and until you do that, you're wasting our time and your own.I thought someone could help me i giving me some pointers which I missed. Thanks again!!
Edited by: AnishThomas on Mar 14, 2008 8:13 AM

How do I turn off email notifications when I buy things

I don't want iTunes telling me when I buy new things, I already know. Ho do I turn it off?

I logged into my icloud account, went to agenda and clicked on the green sharing button next to the agenda.
Here you can switch it on and off.
With me however it is nog working for an agenda i have a subscription for.
Has anybody got a clue?

How do I create an automatic discount when a user purchases 2 different products?

Example:
Product 1 = no discount
Product 1 + Product 2 = 30% off

Hi Gideon Stark,
Unfortunately there's no option available for discount codes where if a user purchases 2 different products, a discount will apply. The only options currently available are:
Percentage of Order
Fixed Dollar Amount
Free Shipping
One alternative would be to enable volume discounting: http://screencast.com/t/mNmiJrIX. But this would only apply if an individual product has been purchased multiple times, not two separate products.
Thanks,
Matt.

Sending an email notification when an IDOC get failed

Hi Experts,
Can anybody tell how i can send an email notification when my Idoc fails.
Regards,
Ratheesh

report zalv10.
type-pools: slis.
data: g_repid like sy-repid,
gs_print type slis_print_alv,
gt_list_top_of_page type slis_t_listheader,
gt_events type slis_t_event,
gt_sort type slis_t_sortinfo_alv,
gs_layout type slis_layout_alv,
gt_fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of gt_fieldcat,
col_pos type i.
data: begin of itab,
field1(5) type c,
field2(5) type c,
field3(5) type p decimals 2,
end of itab.
data: begin of itab1 occurs 0.
include structure itab.
data: end of itab1.
data: begin of itab_fieldcat occurs 0.
include structure itab.
data: end of itab_fieldcat.
Print Parameters
parameters:
p_print as checkbox default ' ', "PRINT IMMEDIATE
p_nosinf as checkbox default 'X', "NO SELECTION INFO
p_nocove as checkbox default ' ', "NO COVER PAGE
p_nonewp as checkbox default ' ', "NO NEW PAGE
p_nolinf as checkbox default 'X', "NO PRINT LIST INFO
p_reserv type i. "NO OF FOOTER LINE
initialization.
g_repid = sy-repid.
perform print_build using gs_print. "Print PARAMETERS
start-of-selection.
TEST DATA
move 'TEST1' to itab1-field1.
move 'TEST1' to itab1-field2.
move '10.00' to itab1-field3.
append itab1.
move 'TEST2' to itab1-field1.
move 'TEST2' to itab1-field2.
move '20.00' to itab1-field3.
append itab1.
do 50 times.
append itab1.
enddo.
end-of-selection.
perform build.
perform eventtab_build changing gt_events.
perform comment_build changing gt_list_top_of_page.
perform call_alv.
form build.
DATA FIELD CATALOG
Explain Field Description to ALV
data: fieldcat_in type slis_fieldcat_alv.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD1'.
fieldcat_ln-tabname = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
fieldcat_ln-key = ' '. "SUBTOTAL KEY
fieldcat_ln-no_out = ' '.
fieldcat_ln-seltext_l = 'HEAD1'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD2'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-no_out = 'X'.
fieldcat_ln-seltext_l = 'HEAD2'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD3'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-ref_fieldname = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
fieldcat_ln-ref_tabname = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
fieldcat_ln-no_out = ' '.
fieldcat_ln-do_sum = 'X'. "SUM UPON DISPLAY
append fieldcat_ln to gt_fieldcat.
DATA SORTING AND SUBTOTAL
data: gs_sort type slis_sortinfo_alv.
clear gs_sort.
gs_sort-fieldname = 'FIELD1'.
gs_sort-spos = 1.
gs_sort-up = 'X'.
gs_sort-subtot = 'X'. ***CRUCIAL STATEMENT****
append gs_sort to gt_sort.
clear gs_sort.
gs_sort-fieldname = 'FIELD2'.
gs_sort-spos = 2.
gs_sort-up = 'X'.
*GS_SORT-SUBTOT = 'X'. **THIS SHOULD NOT BE UNCOMENTED*
append gs_sort to gt_sort.
endform.
form call_alv.
ABAP List Viewer
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_structure_name = 'ITAB1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = gt_events[]
IT_EVENT_EXIT =
is_print = gs_print
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = itab1
exceptions
program_error = 1
others = 2.
endform.
HEADER FORM
form eventtab_build changing lt_events type slis_t_event.
constants:
gc_formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = lt_events.
read table lt_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move gc_formname_top_of_page to ls_event-form.
append ls_event to lt_events.
endif.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
endform.
form comment_build changing gt_top_of_page type slis_t_listheader.
data: gs_line type slis_listheader.
clear gs_line.
gs_line-typ = 'H'.
gs_line-info = 'HEADER 1'.
append gs_line to gt_top_of_page.
clear gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'INFO 1'.
append gs_line to gt_top_of_page.
gs_line-key = 'STATUS 2'.
gs_line-info = 'INFO 2'.
append gs_line to gt_top_of_page.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
endform.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
write: sy-datum, 'Page No', sy-pagno left-justified.
endform.
form end_of_page.
write at (sy-linsz) sy-pagno centered.
endform.
PRINT SETTINGS
form print_build using ls_print type slis_print_alv.
ls_print-print = p_print. "PRINT IMMEDIATE
ls_print-no_print_selinfos = p_nosinf. "NO SELECTION INFO
ls_print-no_coverpage = p_nocove. "NO COVER PAGE
ls_print-no_new_page = p_nonewp.
ls_print-no_print_listinfos = p_nolinf. "NO PRINT LIST INFO
ls_print-reserve_lines = p_reserv.
endform.deepakb
Posts: 3
Joined: Mon Nov 17, 2003 8:18 am
Location: Mumbai

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

Hi,
How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How do I create an email list sign up form for my iWeb website?

Well that's the question - how do I create an email list sign up form for my iWeb website?
Could someone tell me what's the simplest way using iWeb to create an interactive option
for users to enter their email address and the info be forwarded to me so I can add to an
email list?
It would be great if, since I'm using a Mac computer & iWeb, there was a way to have the
submitted emails automatically added to a group in my Mac Addressbook.
I got this MacBook Pro in Sept 2010 so I believe that's iWeb '08 I'm using.
Anyway I'm thinking there should be a way to do this with some system involving an HTMK
Widget and an email account.
By the way this is for hosting through a 'real server', not MobileMe (which I plan to get later
when I can afford it).
Any help or suggestions would be appreciated.
Mark

Website forms require some code in a snippet and a formmail.php script on the server to process the form and send the info to the required email address. You can do all this when you switch to a "real" server.
In the meantime you can use a form or marketing service or, better still, an application like MailShoot which generates the form, handles the database and sends out the bulk emails.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Email notification when Document status changes in Solution Manager

Hi,
Is there a way to send email notification to certain people if the document status changes in Solution Manager?
For example: A notification email should be send to business user when development is complete.
When development is complete, document is set with status 'Build complete'. As soon as this status is set, we want to notify business user to test the object. Similarly on other document statuses as well.
Thanks in advance.

Hi Vikky
Check out doco 'How to: Automatic email notification' on service.sap.com.
SAP Support Infrastructure > SAP Solution Manager > Information for VARs ASPs and AHPs > Setup Documents (SP15+)
Thanks
Daniel

How can I have an email notification sent to me (it's already sent to the submitter of the form)?

I've created a form and have allowed the "email submission receipt" so an email is sent out to the submitter confirming that the person filled out the form. Is there any way to have that same email sent to me?
I tried the option of using "Email Notifications", but it says my email address isn't verified. I am a collaborator instead of the author and can't change the author's email address to mine.
Help!
Thanks.
Karen

I want to add to my last reply as this is a bit confusing.
You say you are NOT the author of the form. What are your rights to the form? Are you a co-author, contributor or reader? Author and Co-authors can turn the feature on and off. Contributors and Readers don't have the rights to do so.
You say : "I am a collaborator instead of the author and can't change the author's email address to mine". What do you mean? Is it disabled (greyed out)? If the feature is turned on (check box "Send email notifications when submissions are received" is checked) then you should be able to add yourself to the "To" field.
Note that to receive notifications to a specific email address that email address needs to be a FormsCentral account (it can be a free account). If it isn't then make sure you create an account for that email address, accept the TOU and then confirm the email address after receiving the email from FormsCentral. Only after those steps are done will you be able to receive email notifications. We can only send notification to FormsCentral accounts so that the user can opt-in/otp-out of the notifications emails.
Gen

Send different email notifications when a request is rejected/completed

Hi Friends,
I have developed a SOA composite in OIM 11g. And I am getting the same email notification when a request is fully completed or when it is rejected by an approver. How to send diffrerent email notification when a request is completed and when it is rejected by an approver.

There are multiple ways in which you can do it.
1. Modify your SOA composite and change the notification properties in the .task. Here change the status of the event and configure different notifications for different events.
2. Use the Request Status change plugin in OIM to send the notification and remove all notification from SOA composite.
3. Use explicit notification service in the SOA composite and attach the notification service component at appropriate places in the SOA workflow. Additionally remove the notification configuration from the .task
-Bikash

How can I recieve an email notification

How can I receive an email notification that I got a response back when I send my document out.

Hi Richy E,
You may logon to Acrobat Pro, PDF Pack, Export PDF & More | Acrobat Document Solutions with your Adobe id and password.
Go to 'Send' section 'Select Files To Send' -> 'Choose Files From My Computer'.
Select desire file then click on check box of 'Send Personalized Invitation'.
Write the Email id in the given space below the 'Send To' option then click on 'Send'.
Regards,
Florence

How do i create an email account

How do I create an email account on my new macbook pro?

Do you have an email ISP or an online email account such as GMail? Before you can create a Mail account on the computer you need to have the information provided by your email ISP to enter into the email application: your email address, .e.g., [email protected]; your email provider's SMTP server address, .e.g., smtp.server.com; the POP or IMAP mail server address, e.g., mail.server.com. You will also need your username and password for accessing your mail account.
In many cases whoever provides your email service will have a help page showing you what to do to configure Mail on the Mac.

Using Alert Framework to send email notifications when Process Chain fails

Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
Ken

Interesting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken

How do I create an email group on iPad 2?

How do I create an email group from email or contacts to send emails to groups of like contacts

It's a comma (or semicolon) rather than a decimal point, if you're doing it manually, but that method does work across iPhone, iPad and iPod touch.
This is actually close to how our "MailShot" app works (unlike most other group email apps) except that MailShot manages the groups for you and makes it easier to delete and add contacts to your groups.
If your groups are small you can try our free version on
http://itunes.apple.com/us/app/mailshot-group-email-done/id410279354?ls=1&mt=8.
There's an upgrade path to the full version if you like it in that app. or you can go straight to the Pro version:
http://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?ls=1&mt =8
Any problems, get in touch on our support email.
Peter
Soluble Apps
Disclosure: I am the developer of MailShot and MailShot Pro and may benefit from their sales.

How do I create a email notification when a user hits the submit?

Similar Messages

Maybe you are looking for