How do I create a kerberos ticket using coldfusion

I have 3 apps on our intra net that require authentication and would like to use kerberos to accomplish this. This is my set up.
users log in to the network and authenticate via active directory (all windows based) , Our web apps are on a box running solaris 10, weblogic app server, cf 9 and oracle 11g. A group of our web apps on this sever require users to authenticate through oracle (not the web / app server).
I can authenticate with kerberos via a putty session on the server with no problems.
USEING COLDFUSION, how do i request a kerberos ticket and pass the necessary credentials to authenticate.?
can this be done.?
I am looking for a CODE SAMPLE OF HOW DO THIS IN A UNIX environment NOT WINDOWS.
I appologize for the frustrated tone of this post. However, after a week of reading documentation til my eyes bleed, to end up chasing my tail with no truly help info............
TIA
JB

This is something your web server should do, not CF. Configure your web server to participate in the Kerberos realm. If WebLogic is the web server (and not just the application server) configure that:
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/secmanage/sso.html
If you have WebLogic configured to use Apache as a web server, configure that:
http://modauthkerb.sourceforge.net/
http://support.microsoft.com/kb/555092
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

Similar Messages

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

Purchased a second iphone need to create an account, however the computer already has an itunes account...How do I create a second account using one copy of itunes on a computer??

Purchased a second iphone need to create an account, however the computer already has an itunes account for the first iphone...How do I create a second account using one copy of itunes on single computer??

Why do you need a new account?
Use the same account on both.
How to use multiple iPods, iPads, or iPhones with one computer

How can I create a new label using Pages and Avery Labels products?

How can I create a new label using Avery LAbels and PAges on an imac?

Contacts prints to Avery labels.
Otherwise just open the appropriate Word template from Avery's website, in Pages.
Peter

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

How do I create a single image using PSE12 from multiple originals where each original is still separate?

How do I create a single image using PSE12 from multiple originals in which the originals are still separate (i.e. side by side or arranged in a square)? I could do this in PSE2, but can't find how to get PSE12 to do it.
Grecophile55

In PSE2 there was a single photo-merge. I browsed all my images and I could then click and drag each to its new position before saving. There doesn’t seem to be a similar facility in PSE12.

I need to know how I will create a dynamic website using php and mysql

I need to know how will I create a dynamic website using php and mysql that people could have the abilities of registering in the website, and modify their profile where they can add their pictures and everything. apart from that, they should have the ability to search about other member. hope to here more from you.

If you are a right-brained creative, and have no previous experience or propensity to be able to understand coding and database "stuff", and/or if your time can be better spent on other skills, I recommend you save your sanity and hire a developer... or at least the first time around. I have been attempting to grasp this for years... and have a library of marked up books to prove my efforts, all while trying to keep up with an ongoing client base that is always cramped. It's a wonder I still have my sanity... then again, I might not be the best person to determine that. Others might question it.
That said, I still plan to master php... one of these days.

How can we create such navigation buttons using Flash CS4?

Hi,
How can we create such navigation buttons using Flash CS4 is in the following website? Please help me with any such tutorial to make my custom navigation bar/buttons.
http://city.reallusion.com/join.html
Thanks.

While the Note 4 is a reasonably large device it still falls into the phone layout bucket. We need this layout to function on very small screens some as low as 320 pixels high and 240 pixels wide. These sorts of devices don't have the space for a full toolbar.

HT2589 how can i create apple id without using credit card details ?

how can i create apple id without using credit card details ?

@Limnos - that doesn't work anymore. There is no NONE option. I've been at it for hours trying to set up my daughter's account. I've tried creating and verifying an appleID on the web, on her touch...everything. Every single time you get to the stupid Touch, it wants to walk you through the verification of the account and it demands payment (even for their suggested apple Remote method listed in the KB).

How can I create a Online Store using Muse? (with not Business Catalyst)

How can I create a Online Store using Muse with not Business Catalyst for example three services
_ttps://orders.self-pub.net/checkout.php?m=fastcheckout
_ww.self-pub.net/services/covers.html

Hi,
Unfortunately there is no option stand alone in Muse to create an online store. However if any hosting plan uses CMS feature like Business Catalyst and ecommerce using modules and tags, you can use the same proceedure as for Business Catalyst and integrate that system and host the Muse site on their platform and that would work.
There is other thing that you can try is, Insert HTML codes to link the pages and some contents in Muse to your desired CMS. What you can also do is after you create the site in Muse, you can export the Muse site and get the layout and design of your site and copy paste the codes for pages with some HTML and coding skills to integrate with your desired hosting.
Hope this helps.
Regards,
Rajan

How can I create a Online Store using Muse?

How can I create a Online Store using Muse?
I have been looking around for solutions but I can't find one.
I was just hoping that someone else might have known of a way.
Thanks!

Since you can access the Alpha File Manager it means the option to "Enable online content editing (incompatible with Muse)" is ticked up under your profile details. With this enabled you can create Web Forms under Site Manager. Once you create the contact form open the Alpha File Manager (AFM), select the page where you want to insert this and choose the Web Forms from the right hand column. On the pop-up window select the web form to insert and click Insert.
Regarding the upgrade, as long as the site is in trial mode you can choose any plan for the site, see my answer #7. Create a new trial site, choose the link to the new trial site created from PP and publish your site there for testing purposes so you will have ecommerce included and available for you to try out.
If things go well you can request an upgrade to your current site to have the ecommerce included (the only situation in which this upgrade won't be available is when the site is published on one of the 5 sites received with the CCM subscription, they are webBasics and cannot be upgraded: http://www.adobe.com/products/creativecloud/publish-anywhere.html under "Publish websites" section, and the option will be to create the site from partner portal and publish the content from Muse)
At this moment indeed there's little documentation on how to integrate the two but this is because Muse is just not ready to take advantage of BC capabilities. It was never intended for CMS features of BC to be available in version 1 of Muse. This has already been mentioned a few times (one relevant example: http://forums.adobe.com/message/4355214#4355214#4355214)
Regards,
Cristian

How can I create a website easily using Mac products?

how can I create a website easily using Mac products?

By using iWeb if you have it and if you don't have iWeb, there are lots of other Mac compatible products that you can use instead such as RapidWeaver, Sandvox, Freeway Pro/Express 6, WebAcappella 4, Flux 4 and Quick n' Easy Website Builder.
Just do a search of this forum and you will see literally hundreds of post on this topic.

I got 3.95GB available on my flash drive and need 4GB to reinstall lion osx how can i create space on usb using Disk Utility ??!

I got 3.95GB available on my flash drive and need 4GB to reinstall lion osx how can i create space on usb using Disk Utility ??!

What is the capacity of the flash drive?
You might also be able to reinstall Lion without a flash drive, by booting up the computer holding the Command + R keys, and choosing Reinstall OS X.

How do you construct a web form using coldfusion??

How do you construct a web form using coldfusion?? any
examples?
thanks in adv.

A sample Form:
<cfform action="CCARProc.cfm"
enctype="multipart/form-data" method="post" name="CCAR"
onsubmit="return verify()">
<table width="730" border="0" cellpadding="2"
cellspacing="1" align="center" class="unnamed1">

<tr valign="top">
<td colspan="3" bgcolor="#F2F2F2">Name Of
Requester(<font color="red">*</font>)</td>
<td width="402" bgcolor="#F2F2F2"><cfinput
type="text" name="Requestor_Name" size="15" value="#REQNAME#"
maxlength="25" >
MTABT Email(<font
color="red">*</font>)
<cfinput name="Req_Email" type="text" size="8"
maxlength="20" value="#ReqEmail#"
>@mtabt.org</td></tr>
<tr>
<td colspan="3">Requester Telephone #(<font
color="red">*</font>) </td>
<td><cfinput type="text" VALUE="#REQPHONE#"
name="RPhone" size="12" maxlength="12" message="Requester Phone
cannot be blank / Invalid Entry!" required="yes"
validate="telephone"> [e.g. xxx xxx xxxx or
xxx-xxx-xxxx]</td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Facility(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2">
<cfselect name="Facil">
<option value="2B">2B </option>
<option value="BBT">BBT </option>
<option value="BW">BW </option>
<option value="CB">CB </option>
<option value="HH">HH </option>
<option value="MP">MP </option>
<option value="QMT">QMT </option>
<option value="RI">RI </option>
<option value="TM">TM </option>
<option value="TB">TB </option>
<option value="TN">TN </option>
<option value="VN">VN </option>
</cfselect>
</td>
</tr>
<tr>
<td colspan="3">Department(<font
color="red">*</font>)</td>
<td><cfselect name="Dept">
<option value="Contracts">Contracts </option>
<option value="Engineering">Engineering
</option>
<option value="Executive Office">Executive
Office</option>
<option value="Finance">Finance </option>
<option value="General Counsel">General Counsel
</option>
<option value="HS">HS </option>
<option value="HR">HR </option>
<option value="ISD">ISD</option>
<option value="Legal">Legal </option>
<option value="Labor Relations">Labor Relations
</option>
<option value="Operations">Operations </option>
<option value="Payroll">Payroll </option>
<option value="Planning & Budget">Planning &
Budget </option>
<option value="Procurement & Mtrl">Procurement
& Mtrl </option>
<option value="Purchasing">Purchasing </option>
<option value="Revenue Management">Revenue Management
</option>
<option value="Staff Services">Staff Services
</option>
<option value="SD">SD</option>
<option value="Technology">Technology</option>
</cfselect></td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Division(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="Div"
type="text" size="20" maxlength="25" VALUE=""></td>
</tr>
<tr valign="top">
<td height="27" colspan="3" >Justification(<font
color="red">*</font>)</td>
<td bgcolor=""><textarea name="Justi" cols="50"
rows="3" wrap="VIRTUAL" ></textarea> </td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">VP Approval
By (<font color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="VPAppFName"
type="text" size="20" maxlength="25" VALUE="#VPFName#">
MTABT
Email(<font color="red">*</font>)
<cfinput name="VPE" type="text" size="8" maxlength="20"
value="#VPEmail#" >@mtabt.org</td>
</tr>
<tr>
<td colspan="3" valign="top"
bgcolor="#F2F2F2"></td>
<td colspan="2" rowspan="2" valign="top"
bgcolor="#F2F2F2"><div align="left">
<input name="Submit" type="submit" value="SubmitTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';" >
<input name="Reset" type="reset" value="ReSetTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';">
</div></td>
<td width="90" valign="top"
bgcolor="#F2F2F2"></td>
</tr>
</table>
<div align="right"><span class="style4">Revised(
01.28.05 )</span>
<input name="submitDate" type="hidden"
value="<cfoutput>#DateFormat(Now(),'mm/dd/yy')#</cfoutput>">
</div>
</cfform>

How do you create an array without using a shell on the FP?

I want to be able to read the status of front panel controls (value, control box selection, etc.) and save it to a file, as a "configuration" file -- then be able to load it and have all the controls set to the same states as were saved in the file. I was thinking an array would be a way to do this, as I have done that in VB. (Saving it as a text file, then reading lines back into the array when the file is read and point the control(s) values/states to the corresponding array element.
So how do I create an array of X dimensions without using a shell on the front panel? Or can someone suggest a better way to accomplish what I am after? (Datalogging doesn't allow for saving the status by a filename, so I
do not want to go that route.)

Thanks so much m3nth! This definitely looks like what I was wanting... just not really knowing how to get there.
I'm not sure I follow all the icons. Is that an array (top left with 0 constant) in the top example? And if so, that gets back to part of my original question of how to create an array without using a shell on the FP. Do I follow your diagram correctly?
If I seem a tad green... well I am.
I hope you understand the LabVIEW environment and icons are still very new to me.
Also, I had a response from an NI app. engineer about this problem. He sent me a couple of VI's that he threw together approaching this by using Keys. (I still think you are pointing to the best solution.) I assume he wouldn't mind m
e posting his reply and the VI's for the sake of a good, thorough, Roundtable discussion. So here are his comments with VI's attached:
"I was implementing this exact functionality this morning for an application I'm working on. I only have five controls I want to save, but they are all of different data types. I simply wrote a key for each control, and read back that key on initialization. I simply passed in property node values to the save VI at the end, and passed the values out to property nodes at
the beginning. I've attached my initialize and save VI's for you to view. If you have so many controls that this would not be feasible, you may want to look into clustering the controls and saving the cluster as a datalog file.
Attachments:
Initialize_Settings.vi ‏55 KB
Save_Settings.vi ‏52 KB

How do I create a kerberos ticket using coldfusion

Similar Messages

Maybe you are looking for