How do I create a point to a list of devices?

I have a .dll code with a function to control the Analyzer from AX/4000, as follow bellow:
void anaRun(UINT8 run, UINT8 *devList, UINT8 numDev)
How do I create in Labview the list of devices and how do I specify the number of devices?
Thank you.

If you simply need to know how to pass a pointer into a call library function node then you should check out this document:
Passing and Receiving Pointers with C/C++ DLLs from LabVIEW
https://decibel.ni.com/content/docs/DOC-9080
--Ryan

Similar Messages

  • How can I create a magazine web app for all devices?

    How can I create a magazine web app for all devices?

    magazine web app is not supported in DPS as of now. You can share the contents to preview it on web content viewer.

  • How do I get my iPhone to stay listed under devices on iTunes page after I have unplugged my iPhone from my Mac? My iPad stays listed under devices.

    How do I get my iphone to stay listed under devices on Itunes page after I have unplugged it from my Mac? My ipad stays listed under devices.

    Phone not recognised in itunes
    iPhone not recognised by iTunes on PC  or  iPhone not recognised by iTunes on Mac

  • How do I create a group distribution email list with my contacts?

    I have many contacts and need to create email distribution lists with my contacts. It is too difficult to choose each contact with every email. How do I create a group contact list with my contacts on iCloud?

    Hello there, swcoxdpm.
    The following Knowledge Base article provides information on creating Group Contacts in Mavericks on your Macbook Air:
    Mail (Mavericks): Address messages
    http://support.apple.com/kb/PH14922
    Use a group address
    If you regularly send messages to the same group of people, you can save them as a group in Contacts, then use the group address to email them.
    Group contacts
    The steps to do that, are found here:
    Contacts (Mavericks): Group contacts
    http://support.apple.com/kb/PH15075
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do i add an macbook to the list of devices in find my mac

    My main icloud account is inked to my imac. I can't seem to find how to add my macbook to the list of devices in find my iphone.  Can anyone help?
    Thanks.
    Jaimer73

    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
    Reporting a lost or stolen Apple product
    AT&T, Sprint, and Verizon can block stolen phones/tablets
    What-To-Do-When-Iphone-Is-Stolen
    Lost or Stolen iPhone? Here’s What to do.
    6 Ways to Track and Recover Your Lost/Stolen iPhone
    Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
    Find My iPhone
    Setup your iDevice on MobileMe
    OS X Lion- About Find My Mac
    How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Third-party solutions for computers:
    VUWER 1.5.4
    Sneaky ******* 0.2.0
    Undercover 4.7
    LoJack for Laptops Premium Mac
    STEM 2.1
    MacPhoneHome 3.5

  • How would I create "bullet point" titles in Premiere CS6, without creating individual titles?

    What I mean by "bullet points" is how they did the titles in this video: http://www.youtube.com/watch?feature=player_embedded&v=NHGAEqeXTeY
    I know you could do it by creating a different title for each line and then manipulating them on the time line but seems like there should be an easier way to do that. Could someone help me out please? Thanks.

    It might be possible to achieve that effect without creating individual titles, however creating a stack of titles is the easiest and most strait forward way.
    Create a finished screen 1st, with all the elements that will appear by the end of a title sequence. Click the "new title based on current title" button to create a copy, then delete the last title element on the page, then repeat until you are just left with the 1st element that you want to appear on screen.
    Overlay them on your timeline in reverse order of creation, and you have your effect.
    That should be the easiest way.
    Good luck.

  • How do I create cue point in FLV component

    Ok team,
    I have a video clip that needs to have sound with it, I also want to put motion graphics at certain points in the clip using Flash.
    Ok so if I embed the clip into the timeline so that I can use another layer on top to do the graphics I get problems with the sound- I have even tried to have the sound as a separate file and play it using script starting the video and sound at the same time, but it gets out of whack..
    If I import the video externally there is no way I can see what is going on so that I can do the graphics on top....
    I am looking at adding cuepoints to the video to try to trigger my graphics in this way, it says online to go to the property inspector and right click on the cuepoints option, but when I go to the properties inspector it is telling me that this is not supported in AS3? so WTF! I am nearly ready to start punching myself in the head here...  The online Adobe help I am looking at is for Actionscript 3 compnents so something is goig very very wrong
    Please help, is there an easier way to do this?  I am compositing in Premiere pro and adding text but when I export as FLV it is looking fuzzy- and also the text becomes interactive at a later stage so it would be much better if it could happen in Flash.
    PLease please help
    Cheers
    sub

    The topic of audio / video syncing is often mentioned in the Forum. The usual suspect is the audio...." but it gets out of whack".
    That is a fundamental mis-understanding.. it's NOT the audio that gets out of whack... it's the video!
    You can embed video with (streaming type) sound into the main timeline and get very good syncing results provided you understand and build on the fact that the vdeo must match up and sync with the audio, NOT the other way around.
    For your review (from an earlier post):
    Also remember that it's the animation that gets out of sync, not the audio.
    The reason I say that is because the audio MUST play at one and only one frequency... or in other words, the audio will have an exact length of time that it takes to play the sound. If you shorten that time in an attempt to match the animation, that's sort of like pushing the sound together, that increases the frequency and raises the pitch... making it sound like Alvin and the Chipmunks.
    On the other hand, if you streeeeetch out the sound over a longer period of time, decreasing the frequency, you looowweer the pitch.
    So knowing that sound must play back at only one rate (or frequency), you'll need to match the animation to the playback speed (frequency) of the audio, not the other way around.
    While it's often recommeded that you not embed video into the main timeline because of this same audio/video syncing problem ("audio gets out of sync"), I've had no problems with syncing the audio and video as long as I set the Flash doc frame rate to exactly match the original video Frame rate (29.97 frames per sec for mini-DV).
    Here's an example of a video embedded directly into the timeline, yet the audio stays in sync.
    http://www.cidigitalmedia.com/tutorials/vid_sync/vid_sync.html
    Now I realize you may not be using video, but the principle is the same. Match the animation to the audio, not the other way around.
    This may mean that you need to play with the document frame rate to find the sweet spot where the audio and animation stay in sync. Test your .swf with higher and lower frame rates to see the effect. It may take some experimentaion but you should be able to greatly improve the sync.
    So in your case, if the video origianlly had audio with it (as many videos do), the frames per second of the Flash document must match exactly that of the original video or the video will either get ahead of the audio or fall behind the audio. Again, it's the video that is out of sync, NOT the audio.
    Best wishes,
    Adninjastrator

  • We have too many apple devices, how can I creat another apple ID and divide the devices among 2 Apple Ids?

    Hello all,
    We started off with the original iPhone a few years ago and now between my wife and I (plus Kids) we have too many apple devices under the same apple-ID (2 X iPhone 6+, 2X macbook Pro, 2X iPod-touch and 1X iPad)
    We are constantly running into issues because everyone in the house is using the same apple id, downloading Apps using the same ID, sharing the same cloud and receiving each other's iMessages.
    I know that I can create another Apple-ID, what I am unclear on is once I do have a new apple ID, how do I assign that to half the devices (1X iPhone 6+, 1 X MBP and 1 Ipad)
    Please respond if you are able to help.
    Thank you

    I'm not sure what they told your at the Apple store, but each Apple ID can only create a single iCloud account.  If you want separate accounts for all these devices, they will have to be created using separate IDs.  Note: you can do this and still share the same ID for other services such as your iTunes store account.  The iCloud ID does not need to be the same as the ID used for other services.
    To create an account, go to Settings>iCloud and sign in with a different Apple ID.  If you want to migrate a copy of the current iCloud data to the different accounts, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll.  If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account.  Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; the devices keeping the current account will not be effected by this), provide the password to turn off Find My iDevice and choose Keep on My iDevice when prompted.  Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.

  • How can i create an icloud accout without any iOS device or Mac?

    I do not have an iOS device nor do I have a Mac. I would like to view other persons Photostream. When I download the iCloud 2.1.1 (for windows) I am being asked to sign in with my apple ID. When I enter it, I am being told that the apple ID is correct, but that this is not an iCloud account. From here I don't know how to continue.

    You can't.

  • How do I create a "playlist" from my list of videos?

    I have quite a number of saved videos but it appears I can only play them one at a time.  Is there a way I can create a playlist like I can with songs?  ie. pick one video, and then add more to the list so I can play back several videos in a row without having to go back and load each one separately.  HELP PLEASE!

    In addition to the DVD burner you'll also need software that is capable of authoring DVDs.
    I'm not a Windows person, but I believe Vista comes with an app called Windows DVD Maker.
    You might have more success finding people knowledable with it use at Microsofts support site.
    http://support.microsoft.com/ph/11732
    You cannot burn a DVD from iTunes.
    Matt

  • How do i create a keyboard shortcut to sync my device on itunes on mac?

    Hi,
    i need help!
    ive been wanting to sync my iDevice on itunes using only a keyboard shortcut, but i cant seem to be able to create it! please help me!

    Jbrenner,
    Not sure if you have found a suitable workflow. The best option in my view would be the COMMAND EDITOR option.
    1. Launch COMMAND --> CUSTOMIZE from Apeture Menue.
    2. If you are doing the custom command for the first time you'll have to duplicate the Custom Command menu, this can be done by selecting DUPLICATE on the menue which would by default display DEFAULT.
    3. When you duplicate, you ll be asked to save the duplicated Custom Editor.
    4. The duplicated custom editor basically will have all the DEFAULT short cut keys and you are now ready to customise it.
    5. To customise it, select the Menu action from COMMAND GROUP and simply press the desired short cut for the action on you physical key board.
    6. If the SHORT CUT is already used by Apeture, it will prompt whether or not you want to override the DEFAULT, hit yes.
    7. As a last step dont forget to hit SAVE on KEY DETAILS tab.

  • I have 3 guest lists names. How do I create a total for each list and a fourth total for all of them combined?

    I am getting married and I want to stay organized. I have a spread sheet for my guest list. It is 3 columns/lists (my family, his family, and friends). How do I make a running total of each list and a fourth total of all of them combined?
    Thanks so much!!!!

    If I understand your problem you want to keep a list for the bride, the groom and friends as well as a total of all guests.
    The total is the easiest.  If you have the other three numbers then you can use the function SUM() to add those three together.
    The rest of the problem is solved by assumeing:
    1) the lists are in columns
    2) the header does not count in the total
    taking the difference of the total rows and the blank rows minus 1 will give you the total guest names in the a column.
    The contents of cell:
    C2 =ROWS(Bride)-COUNTBLANK(Bride)-1
    C3=ROWS(Groom)-COUNTBLANK(Groom)-1
    C4=ROWS(Friends)-COUNTBLANK(Friends)-1
    C5=SUM(G2:G4)

  • How can i create my BC featured product list in to a slide show for multiple products in one row. i have products aligned in a row i just would like to make it a slide show of the multiple (20) products.

    i have products aligned in a row already using custom css.i just would like to make it a slide show of the multiple (20) products in the one row.
    i am using the featured product module from the development section of business catalyst. i would love to display as many new products as possible in one row of products. so i can just click a arrow left button and scroll through the products.
    holy-shippers.businesscatalyst.com is the site i am mentioning.

    Hello,
    Aside from any custom implementations that may be suggested by any other members, you could also consider using some hero-type slider like those found on our new responsive templates, and have each web-app item contain a product.
    Kind Regards,
    Alex Pavelescu

  • How do I create separate cells from a list of names?

    I mostly use Numbers to alphabetize long lists of names to print labels at my work.
    I used to be able to just copy and paste a list of names into Numbers from Illustrator and it would put each name into it's own cell.... but lately it just pastes the whole list into one cell. I feel like there's some simple solution I'm just over looking!
    Any advice would be appreciated! Thank you!

    Numbers will properly paste lists when each item in a row is separated by tabs
    this will NOT paste correctly:
    John<SPACE>Wayne
    Tom<SPACE>Smith
    This will paste correctly:
    John<TAB>Wayne
    Tom<TAB>Smith
    replace <SPACE> or <TAB> as needed

  • How do i create a Multi column Dynamic list using Swing?

    Hi,
    I need to be able to do a file search (in a separate thread) on the hard drive and display the results in a multi column List control .
    Jtable seems to be rather 'static'y. i.e load data in once. and maybe reload it again later. But i need to load one row in at a time as the search progresses.
    Also any row can be deleted or moved to another position.
    CListCtrl in MFC allows me to do this handily.
    But Is there a way to do this using Swing?
    havent seen anything that says JList can do this.
    TIA

    Hi Jacob.
    I would use JTable for that. I did not exactly understand what you meant by JTable being "static"y.
    Anyway, I would have the thread update the data in the tablemodel behind the table and invoke "fireTableRowsInserted" (may be after every insert or after inserting a chunk of rows). I had a sample something similar to what you are working on. Let me know if you need the sample.
    HTH.
    Regards,
    Vijay

Maybe you are looking for