How do I create a print button to print a specific range of the document.

How do I create a print button to print a specific range of the document. I've found JavaScript to print a specific page, but a range or even multiple ranges. Form is created in Adobe 9 Pro. Any help would be truly appreciated!

Sure, I'll give it a test. Its just that I have a 128 page form that not all of it needs to be printed.
Currently, I have an index page where I want to set up a print button queues per form, however there are several form scattered throughout the document that make up a specific section, but it does not require printing the entire document. Does that make sense?
I did find this JavaScript during my reseach, but have not be able to get it to work.
var pp = event.target.getPrintParams() ;
pp.interactive = pp.constants.interactionLevel.full;
pp.printRange=[[1, 1], [3, 4]];
event.target.print(pp);

Similar Messages

How can we create such navigation buttons using Flash CS4?

Hi,
How can we create such navigation buttons using Flash CS4 is in the following website? Please help me with any such tutorial to make my custom navigation bar/buttons.
http://city.reallusion.com/join.html
Thanks.

While the Note 4 is a reasonably large device it still falls into the phone layout bucket. We need this layout to function on very small screens some as low as 320 pixels high and 240 pixels wide. These sorts of devices don't have the space for a full toolbar.

How can i create a skip button?

I'm creating an intro animation that leads to a drop down
menu, but how do I create a skip button that lets me skip the intro
to the menu.

try this..
skip_btn.onRelease = function(){
gotoAndStop("menuFrame");
skip_btn is the instance name of your skip button, and
menuFrame is the frame name of where your menu is located.

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

Hi Libby,
Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
Click the Charts button and choose the Scatter chart.
The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
Click the gear icon at the top left of the selection and choose Share X Values.
You should see a result similar to this:
Notes:
The values on my sample table contain a random element, so they have changed from thhe first image to the second.
The chart is as created by Numbers, with two edits:
Data points have been connected with curves, using the Chart nspector.
The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
Regards,
Barry

Can we have a "print button" to print massive report document ?

Hi there,
Can we have a "print button" to print a massive report document (e.g 3000 page , each for a specific customer description), instead of exporting to pdf or excell before printing.. ?
Thanks
-toni

You cannot have a print Button in the report, But have you tried Scheduling the report, and setting the output to printer? That might meet your requirement. You can also use the schedule section to run it immediately (once)
-Domnic

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

I created a magazine using a IDD template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help :)

I created a magazine using a template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help

eehenry wrote:
It is a problem with a secondary provider, "mag cloud" .
Right, so to advise you we'd need to know the particulars of MagCloud's spec for your project; format, trim size, bleed, etc.
It's doubtful that anything happened "when uploading for printing," so long as you were uploading a PDF, as opposed to the native InDesign file. Did the PDF look right to you before uploading?

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

How do I make a print button that prints "current page" as default

I am working in Adobe Acrobat Professional 7.0 and have created "print
buttons" in the pdf document I am working in. The print dialog box has "print all" automatically selected as the current default. How can
I create buttons that bring the user to the print dialog box automatically selected at "print current page?" I want the user to hit
the print button and have it automatically print the single page that they are viewing only, so that no one will accidentally print the entire book.

You might also check these forums
Acrobat Scripting Forum http://forums.adobe.com/community/acrobat/acrobat_scripting
Acrobat SDK Developer Forum http://forums.adobe.com/community/acrobat/acrobat_scripting

Creating a print button to print chart.

Hi everyone, I created a button to print my module.
The button works great. It pops up the Print Window and
prints my module.
but if I cancel the print dialog without printing, my module
automatically unloads.... ?
Is there anyway I can by pass this?
Thanks!

Flash Catalyst does not directly support printing. You are going to have to add that functionality via Flash Builder and writing ActionScripting. I have not worked with the printing capabilities in Flex, so there is not a lot I can offer past this in terms of advice.I would suggest browsing the Flex forums for some guidance on how to assemble your state for the printer.
Good luck!
Chris

How can i create a filechooser button inside the plugin window?

Hi
i'd like to create a filechooser button to load/save but inside the plugin window. Is it possible ? if yes how can i do that ?
and i need the algorithm to be Mac/Windows compatible if possible
thanks a lot
*best regards*
Jeff

If by the "plugin window" you mean the dialog an automation or a filter plugin from the SDK sample code opens for you, you have to write platform-specific code using either Cocoa on Mac or regular WinAPI on Windows (e.g. by hooking GetOpenFileName()/GetSaveFileName() functions to a button you will add to the resource file or create dynamically). Take a look at any plugin that has a GUI (e.g. the Dissolve plugin) and you'll see that the GUI code is entirely platform-specific as there is no platform-independed GUI framework bundled with Photoshop anymore.
Another option is to use some third-party cross-platform library such as Qt, but if you just need a couple of buttons and file selection dialogs it's probably not worth the trouble,.

How do I create a blog button on DW?

Hi,
I'm new to DW and having a couple of issues. I'd like to create a button for a website in html code that can be put on other people's blogs.
The following is an example of the kind of code I'd like to do: <a href="http://www.manylittleblessings.com" target="_blank" ><img src="http://www.manylittleblessings.com/wp-content/uploads/2010/03/mlb_button125.gif" alt="Many Little Blessings" height="125" width="125" /></a>>
I know how to create a html form, and then add an image and then a link to the image. But when I do this and then upload it the file is something like this: www.site.com/button.html
If I put it into the html coding above, the image doesn't show up at all.
But if I upload the image only as a jpg, I can't get it to work either - I'm not sure what the url address is for the jpg image so that might be part of the problem.
I'd be really grateful for any help.
RMC

Hi,
could it be you should "turn around" your entry, like that?
<a href="http://www.manylittleblessings.com" target="_blank"><alt="YourImageName" src="YourDirPictures/YourPicture.jpg" width="210" height="180">
Hans-G.
Oh sorry, you found it already
Hans-G.
Nachricht geändert durch hans-g.

Creating a print button to print a page from another document - is this possible?

Hello,
My company is designing an interactive pdf with indesign with some great navigation on a side-bar. We've made the dimensions of the navigation pages larger than 8.5 x 11. We are constructing a pdf portfolio that contains a printable version of this document and this interactive version. Would it be possible to have a print button in the interactive document that calls up the corresponding page in the printable document and send it to the printer?

Flash Catalyst does not directly support printing. You are going to have to add that functionality via Flash Builder and writing ActionScripting. I have not worked with the printing capabilities in Flex, so there is not a lot I can offer past this in terms of advice.I would suggest browsing the Flex forums for some guidance on how to assemble your state for the printer.
Good luck!
Chris

Print button in Print view not working; how can I get it to work normally again?

Please help: a few weeks ago, my Print button was working fine, then I imported a few 3rd party print templates, and now the Print button is not a clickable option. I've removed the 3rd party templates but it still does not work (see button in bottom right hand corner) - how I can make the print button work again? Please advise..

Because it is set to print to a JPEG File instead of send to a Printer. Change the Print To: pulldown in the Print Job panel to "Printer"

Create a Print button to Print a specific PDF File

Hi,
Need help with scripting. I'm creating a Menu Page where in I list the PDF files and right beside it put a PRINT BUTTON which of course will print that specific PDF file. Is this doable or not?
Thanks.
VicZam

For more information on the print method, see: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.511.html
Note the nStart and nEnd parameters in particular.

How do I create a print button to print a specific range of the document.

Similar Messages

Maybe you are looking for