How do I create a startup procedure in Veristand?

I want to create a procedure on first execution of the workspace. I also need procedures without alarms. How do I do this in Veristand?
JY
Solved!
Go to Solution.

You can create a startup procedure set to run when the VeriStand Engine first starts up. To do this, simply create a procedure in System Explorer, then go to the main Procedures page and check the box called On Startup. Then simply select the procedure you want to run at startup.
This is slightly different than a procedure that runs when the Workspace opens. For instance, when running a PC Engine configuration, the Workspace might not open up until maybe 10 seconds after the PC Engine has started running, due to the time it takes to connect to and synchronize with the PC Engine from the Workspace. Also, for an RT configuration, when the Workspace runs it doesn't necessarily mean the engine just started up. The VeriStand Engine might have been running for hours or days beforehand if you don't redeploy. Do you want the procedure to run when the engine starts up or every time the Workspace connects?
If you really want a procedure to run when the Workspace connects, one good way to do it would be to create an alarm for the System Channel called Host IP. This channel's value represents the IP Address of the connected host computer. It is zero when no host is connected. Therefore, you can create an alarm to trigger your procedure whenever this channel transitions from zero to a non-zero value. You can use a dummy User Channel to cache the previous value of the host IP so that you only fire the procedure when it changes.
Last point: You said you want to trigger a procedure without creating an alarm. Can you describe your use case a little more? Is there any reason you specifically don't want to use an alarm for this?
Jarrod S.
National Instruments

Similar Messages

  • How can i create a native procedure??

    Hi all,
    How can i create a native procedure in Oracle 8.1.7???
    P.S.: Without using OCI.
    thanx.

    Log into shared services, expand User Directories > Native Directory > Right click users and select "New"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Pointbase : How can I create a stored procedure with Pointbase database?

    Hello,
    Excuse me for my english, I'm not anglophone. I try to create a stored procedure.
    This is my file SampleExternalMethods.java :
      import java.sql.*;    //import com.pointbase.jdbc.jdbcInOutDoubleWrapper;          public class SampleExternalMethods    {      // A connection object to allow database callback      static Connection conn = null;      static Statement l_stmt;      static Statement m_stmt;      static CallableStatement m_callStmt = null;      static ResultSet l_rs = null;          public static void main(String[] args)      {        try        {          String url = "jdbc:pointbase:server://localhost/pointbaseDB";          String username = "PBPUBLIC";          String password = "PBPUBLIC";          conn = DriverManager.getConnection(url, username, password);          doCreateProcedure();          doInvokeProcedure();        } catch (SQLException e) {          e.printStackTrace();        } finally {          if (m_stmt != null) {            try {              m_stmt.close();            } catch (Exception e) {              e.printStackTrace();            }          }          if (m_callStmt != null) {            try {              m_callStmt.close();            } catch (Exception e) {              e.printStackTrace();            }          }          if (conn != null) {            try {              conn.close();            } catch (Exception e) {              e.printStackTrace();            }          }        }      }                  public static void getCountry(String Iso_Code)      {        try        {          // Query the database for the country iso code          l_stmt = conn.createStatement();          l_rs = l_stmt.executeQuery( "SELECT * FROM countries"          + " WHERE country_iso_code ='" + Iso_Code + "'");          //Affichage du résultat de la requête          l_rs.next();          System.out.print(l_rs.getString(1) + " - ");          System.out.print(l_rs.getString(2) + " - ");          System.out.println(l_rs.getString(3));          // Close the result set          l_rs.close();        } catch (SQLException e) {          e.printStackTrace();        } finally {          if (l_rs != null) {            try {              l_rs.close();            } catch (Exception e) {              e.printStackTrace();            }          }          if (l_stmt != null) {            try {              l_stmt.close();            } catch (Exception e) {              e.printStackTrace();            }          }        }      }            public static void doCreateProcedure() throws SQLException {        // SQL statement to create a stored procedure        String SQL_CREATE_PROC = "CREATE PROCEDURE getCountry(IN P1 VARCHAR(30))"        + " LANGUAGE JAVA"        + " SPECIFIC getCountry"        + " NO SQL"        + " EXTERNAL NAME \"SampleExternalMethods::getCountry\""        + " PARAMETER STYLE SQL";        // Create a SQL statement        m_stmt = conn.createStatement();        // Execute the SQL        m_stmt.executeUpdate(SQL_CREATE_PROC);        // Close the statement        //m_stmt.close();      }          public static void doInvokeProcedure() throws SQLException {        // Create SQL to invoke stored procedures        String SQL_USE_PROC = "{ call getCountry(?) }";        // Create a callable statement with three binding parameters        m_callStmt = conn.prepareCall(SQL_USE_PROC);        m_callStmt.setString(1, "CA");        m_callStmt.executeQuery();        // Close the callable statement        //m_callStmt.close();      }    } 
    Afterwards, I have read this note in a Pointbase document:
    To invoke the dateConvert external Java method from a stored function, you must use the
    CREATE FUNCTION statement. The dateConvert external Java method is called from the
    class, SampleExternalMethods.
    In order for the database to access this external Java method, the class SampleExternalMethods
    must be included in the database CLASSPATH. For PointBase Embedded - Server Option, it
    must be in the Server CLASSPATH, but not in the Client CLASSPATH.
    If PointBase Server is run with the Java Security Manager, in the java policy file grant
    ’com.pointbase.sp.spPermission’ to the class that implements the external Java method.
    An "spPermission" consists of a class name with no action. The class name is a name of a class
    that could be used in creating a Stored Procedure in PointBase. The naming convention follows
    the hierarchical property naming convention and that is supported by
    "java.security.BasicPermission". An asterisk may appear by itself, or if immediately preceded
    by ".", may appear at the end of the name, to signify a wildcard match. The name cannot
    contain any white spaces.
    I'm not sure, but I suppose that I must include the class SampleExternalMethods in a .jar file.
    The database CLASSPATH could be : C:\Sun\AppServer\pointbase\lib\
    These my files in this database CLASSPATH:
    pbclient.jar
    pbembedded.jar
    pbtools.jar
    pbupgrade.jar
    I have tryed to include the class SampleExternalMethods in pbclient.jar and pbembedded.jar with this command:
    jar -uf pbembedded.jar SampleExternalMethods
    Afterwards I do that,
    1) Start Pointbase
    2) Configuration of classpath
    set classpath=C:\Sun\AppServer\pointbase\lib\pbclient.jar
    set classpath=%classpath%;D:\J2EE\Ch07Code\Ch07_06
    I precise that my file SampleExternalMethods is into D:\J2EE\Ch07Code\Ch07_06\Ch07.
    Then, I run the program:
    D:\J2EE\Ch07Code\Ch07_06>java -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver Ch07.SampleExternalMethods
    But I have an error message:
    Exception in thread "main" java.lang.NoClassDefFoundError: Ch07.SampleExternalMethods (wrong name: SampleExternalMethods)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.DefineClass(ClassLoader.java:539)
    The problem, I suppose, comes from that the class SampleExternalMethods
    must be included in the database CLASSPATH, but there is a pbserver.jar with pointbase normally, but I didn't find it. That's why I use pbembedded.jar or pbclient.jar in order to include the class SampleExternalMethods. May be I must start from C:\Sun\AppServer\pointbase\lib\ instead of D:\J2EE\Ch07Code\Ch07_06\Ch07?
    Please, can somebody helps me?
    Thank you in advance.
    cagou!

    jschell wrote:
    And I doubt you can recurse like that for embedded java. You must have a class that does the functionality and another class that creates the proc.
    >And I doubt you can recurse like that for embedded java. You must have a class that does the functionality and another class that creates the proc.
    >
    And I doubt you can recurse like that for embedded java. You must have a class that does the functionality and another class that creates the proc.
    Thank you for your response, I have done two classes:
    SampleExternalMethods.java:
    package Ch07;
    import java.sql.*;*
    *public class SampleExternalMethods*
    *public static void getCountry(String Iso_Code)*
    *// A connection object to allow database callback*
    *Connection l_conn = null;*
    *Statement l_stmt = null;*
    *ResultSet l_rs = null;*
    *try*
    *String url = "jdbc:pointbase:server://localhost/pointbaseDB";*
    *String username = "PBPUBLIC";*
    *String password = "PBPUBLIC";*
    *l_conn = DriverManager.getConnection(url, username, password);*
    *// Query the database for the country iso code*
    *l_stmt = l_conn.createStatement();*
    *l_rs = l_stmt.executeQuery( "SELECT* FROM PBPUBLIC.COUNTRIES"
    +" WHERE country_iso_code ='"+ Iso_Code +"'");+
    +//Affichage du résultat de la requête+
    +l_rs.next();+
    +System.out.print(l_rs.getString(1)+ " - ");
    System.out.print(l_rs.getString(2) +" - ");+
    +System.out.println(l_rs.getString(3));+
    +// Close the result set+
    +l_rs.close();+
    +} catch (SQLException e) {+
    +e.printStackTrace();+
    +} finally {+
    +if (l_rs != null) {+
    +try {+
    +l_rs.close();+
    +} catch (Exception e) {+
    +e.printStackTrace();+
    +}+
    +}+
    +if (l_stmt != null) {+
    +try {+
    +l_stmt.close();+
    +} catch (Exception e) {+
    +e.printStackTrace();+
    +}+
    +}+
    +if (l_conn != null) {+
    +try {+
    +l_conn.close();+
    +} catch (Exception e) {+
    +e.printStackTrace();+
    +}+
    +}+
    +}+
    +}+
    +}+
    CreateMethods.java:
    +package Ch07;+
    +import java.sql.*;+
    +public class CreateMethods+
    +{+
    +// A connection object to allow database callback+
    +static Connection m_conn = null;+
    +static Statement m_stmt;+
    +static CallableStatement m_callStmt = null;+
    +public static void main(String[] args)+
    +{+
    +try+
    +{+
    +String url = "jdbc:pointbase:server://localhost/pointbaseDB";+
    +String username = "PBPUBLIC";+
    +String password = "PBPUBLIC";+
    +m_conn = DriverManager.getConnection(url, username, password);+
    +doCreateProcedure();+
    +doInvokeProcedure();+
    +} catch (SQLException e) {+
    +e.printStackTrace();+
    +} finally {+
    +if (m_stmt != null) {+
    +try {+
    +m_stmt.close();+
    +} catch (Exception e) {+
    +e.printStackTrace();+
    +}+
    +}+
    +if (m_callStmt != null) {+
    +try {+
    +m_callStmt.close();+
    +} catch (Exception e) {+
    +e.printStackTrace();+
    +}+
    +}+
    +if (m_conn != null) {+
    +try {+
    +m_conn.close();+
    +} catch (Exception e) {+
    +e.printStackTrace();+
    +}+
    +}+
    +}+
    +}+
    +public static void doCreateProcedure() throws SQLException {+
    +// SQL statement to create a stored procedure+
    +String SQL_CREATE_PROC = "CREATE PROCEDURE PBPUBLIC.getCountry(IN P1 VARCHAR(30))"+
    " LANGUAGE JAVA"
    +" SPECIFIC getCountry"+
    " NO SQL"
    +" EXTERNAL NAME \"SampleExternalMethods::getCountry\""+
    " PARAMETER STYLE SQL";
    // Create a SQL statement
    m_stmt = m_conn.createStatement();
    // Execute the SQL
    m_stmt.executeUpdate(SQL_CREATE_PROC);
    // Close the statement
    //m_stmt.close();
    public static void doInvokeProcedure() throws SQLException {
    // Create SQL to invoke stored procedures
    String SQL_USE_PROC = "{ call getCountry(?) }";
    // Create a callable statement with three binding parameters
    m_callStmt = m_conn.prepareCall(SQL_USE_PROC);
    m_callStmt.setString(2, "CA");
    m_callStmt.executeQuery();
    // Close the callable statement
    //m_callStmt.close();
    }But I have the same error message that previously.
    I have read this note and I suppose that the problem is linked:
    If PointBase Server is run with the Java Security Manager, in the java policy file grant
    *’com.pointbase.sp.spPermission’ to the class that implements the external Java method.*
    An "spPermission" consists of a class name with no action. The class name is a name of a class
    that could be used in creating a Stored Procedure in PointBase. The naming convention follows
    the hierarchical property naming convention and that is supported by
    *"java.security.BasicPermission". An asterisk may appear by itself, or if immediately preceded*
    by ".", may appear at the end of the name, to signify a wildcard match. The name cannot
    contain any white spaces.
    Can you explain me what I must to do in order to solve this problem of spPermission.
    Thanks.

  • How can I create stored procedure?

    I am new in this field, I was reading in this web site on how to create stored procedure,and this is what I did :
    SQL> CREATE PROCEDURE test.proc1 (n IN NUMBER)
    2 AS BEGIN
    3 select * from districts
    4 where doe = n;
    5 END;
    6
    Please direct me. I don't know if I am wrong or right, test is the name of the database, and proc1 is the stored procedure that I want to create, why when I hit Enter after END; I got the number 6.
    How can I call this stored procedure, if it works.
    Thanks in advance
    null

    Some reading and training might prove useful. Even if you are using Linux, this forum is no place for a question like that.

  • How can i create a Package to make this above procedure fit under it ??

    Hi ,
    I am going through package tutorials in Oracle , but unfortunately i couldn't able to follow :
    On Web , They simply say that Packages are used to group Procedures or Functions of similar kind .
    Could any please tell me how this is possible ??
    Assume that i have a simple Stored Procedure as shown below :
    CREATE OR REPLACE PROCEDURE emp_sel (cv_results IN OUT SYS_REFCURSOR)
    IS
    BEGIN
    DBMS_OUTPUT.PUT_LINE('Hi my First Package');
    END;
    Please help , thanks .

    package is basicly a group of procedures, functions, type definitions, etc... if you put this procedure into a package you can do this:
    a package has two parts, spec and body, spec is interface for outside and body is source code.
    create or replace package DUMMY_Pkg is
      PROCEDURE emp_sel (cv_results IN OUT SYS_REFCURSOR);
    end;
    create or replace package body DUMMY_Pkg is
      PROCEDURE emp_sel (cv_results IN OUT SYS_REFCURSOR)
      begin
         dbms_output.put_line('something');
      end;
    end;
    /

  • How can i create a Global Temporary Table inside a Stored Procedure....

    Hi...
    I need to create a Global Temporary Table inside a Stored
    Procedure....
    I have no idea how to do that....
    Please....if u can send me a sample, send to me....
    Thanks a lot

    To create a global temporary table inside a stored procedure,
    the minimal syntax would be:
    CREATE OR REPLACE PROCEDURE procedure_name
    AS
    BEGIN
    EXECUTE IMMEDIATE 'CREATE GLOBAL TEMPORARY TABLE table_name'
    || '(column_name NUMBER)';
    END procedure_name;
    As Todd stated, it would probably be better to create the global
    temporary table outside of the procedure:
    SQL> CREATE GLOBAL TEMPORARY TABLE table_name
    2 (column_name NUMBER);
    Table created.
    You can also specify things like ON COMMIT PRESERVE ROWS or ON
    COMMIT DELETE ROWS.
    It may be that there is something else, like a PL/SQL table of
    records or a cursor, that would suit your needs better. It is
    difficult to guess without knowing what you want to do with it.

  • How to create the pricing procedure for domestic & import.

    HI,
        Pls any body let me know how to create the pricing procedure for domestic & import.
    what is the use of the keys
    step condiiton condition type from   to  manual required statistic   subtotal requirement caltype basetype.
    how system will work based on this.

    Hi,
    Please see below WIKI for your reference:
    http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
    Regards,
    Ninad Kshirsagar

  • I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    Welcome to Apple Support Communities
    Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
    If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

  • How to create report using Procedure.

    Hi All,
    I want to create report in apex.But i do not have sql code.I have one procedure.Is it possible to create report using this procedure in apex.
    CREATE OR REPLACE PROCEDURE headcsv_prc2
    AS
       CURSOR cr_header
       IS
          SELECT ood.organization_code, fm.formula_no AS "FORMULA_NAME",
                   fm.formula_vers AS "FORMULA_VERSION",
                   fm.formula_desc1 AS "FORMULA_DESC",
                   DECODE (fm.formula_status,
                           100, 'New',
                           400, 'Approve for Laboratory Use',
                           700, 'Approve for General',
                           800, 'On Hold',
                           900, 'Frozen',
                           1000, 'Obsolete/Archived'
                          ) AS "FORMULA_STATUS",
                   DECODE (fd.line_type, '1', msib.segment1) product,
                   DECODE (fd.line_type, '-1', msib.segment1) ingrediant,
                   DECODE (fd.line_type, '2', msib.segment1) AS "BY_PRODUCT",
                   DECODE (by_product_type,
                           'W', 'Waste',
                           'R', 'Rework',
                           'Y', 'Yield',
                           'S', 'Sample',
                           NULL
                          ) AS "BY_PRODUCT_TYPE"
              FROM org_organization_definitions ood,
                   fm_form_mst fm,
                   fm_matl_dtl fd,
                   mtl_system_items_b msib
             WHERE ood.organization_id = fm.owner_organization_id
               AND fm.owner_organization_id = msib.organization_id
               AND msib.organization_id = fd.organization_id
               AND fd.organization_id = ood.organization_id
               AND fm.formula_id = fd.formula_id
               AND msib.inventory_item_id = fd.inventory_item_id
               -- and fm.FORMULA_NO like'%TEA%'
               AND fd.line_type IN ('1', '2', '-1')
          GROUP BY ood.organization_code,
                   fm.formula_no,
                   fm.formula_vers,
                   fm.formula_desc1,
                   fm.formula_status,
                   fd.line_type,
                   msib.segment1,
                   by_product_type
          ORDER BY fm.formula_no, fm.formula_vers;
    BEGIN
       DBMS_OUTPUT.put_line (   INITCAP ('ORGANIZATION CODE')
                             || ','
                             || INITCAP ('FORMULA NAME')
                             || ','
                             || INITCAP ('FORMULA VERSION')
                             || ','
                             || INITCAP ('FORMULA DESC')
                             || ','
                             || INITCAP ('FORMULA STATUS')
                             || ','
                             || INITCAP ('PRODUCT')
                             || ','
                             || INITCAP ('INGREDIANT')
                             || ','
                             || INITCAP ('BY PRODUCT')
                             || ','
                             || INITCAP ('BY PRODUCT TYPE')
       FOR ch IN cr_header
       LOOP
          DBMS_OUTPUT.put_line (   ch.organization_code
                                || ','
                                || ch.formula_name
                                || ','
                                || ch.formula_version
                                || ','
                                || '"'
                                || ch.formula_desc
                                || '"'
                                || ','
                                || ch.formula_status
                                || ','
                                || ch.product
                                || ','
                                || ch.ingrediant
                                || ','
                                || ch.by_product
                                || ','
                                || ch.by_product_type
       END LOOP;
    EXCEPTION
       WHEN OTHERS
       THEN
          DBMS_OUTPUT.put_line ('Error No: ' || SQLCODE || 'Error Msg: '
                                || SQLERRM
    END;
    EXEC HeadCSV_Prc2
    Thanks,
    Raghu

    RaghuVarma wrote:
    I created one report using sql code.(Ex: select * from emp).
    But my higher authorities want that for security purpose They will change the code into java.
    What "higher authorities"? What "security purpose"?
    In this process they changed my code as a procedure.Finally they give that java code.they tell to me please fix in apex.
    Do these "higher authorities" know anything about APEX? What does the Java code actually do? Have you asked them how their approach is to be integrated into APEX?
    There is no reason why a properly written Java stored program cannot be used in APEX, provided that whatever it is doing makes sense in an APEX/web context, and isn't some nonsense like using DBMS_OUTPUT to generate a CSV.
    I tried so many ways.But it is not fixed.Different Different errors will occurs.
    Tried what? Demonstrate what you have tried, preferably using examples on apex.oracle.com.
    How to solve this.
    How to solve what? No clearly defined problem or requirement has been identified.
    Describe the the problem/requirement (not your attempted solutions) in detail.
    How to ask questions
    Re: 2. How do I ask a question on the forums?
    Include as much relevant information with your question as possible, starting with:
    APEX version
    DB version, edition and host OS
    Web server architecture (EPG, OHS or APEX listener), platform, and host OS
    Browser(s)/version(s) used
    Theme
    Templates
    Region type(s)

  • How to create a stored procedure and use it in Crystal reports

    Hi All,
    Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
    Thanks in advance.

    If you are using MSSQL SERVER then try creating a stored procedure like this
    create proc Name
    select * from Table
    by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
    here is the syntax to create SP
    Syntax
    CREATE PROC [ EDURE ] procedure_name [ ; number ]
        [ { @parameter data_type }
            [ VARYING ] [ = default ] [ OUTPUT ]
        ] [ ,...n ]
    [ WITH
        { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
    [ FOR REPLICATION ]
    AS sql_statement [ ...n ]
    Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
    Regards,
    Raghavendra
    Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

  • How to Create a Stored Procedure in Oracle

    I try to create a very simple Stored Procedure from Oracle SQL Developer, got the following error. Can someone give me some help on this? I am new on this. Thanks.
    Error(4,1): PLS-00103: Encountered the symbol "BEGIN" when expecting one of the following: := ( ; not null range default character The symbol ";" was substituted for "BEGIN" to continue.
    create or replace PROCEDURE Test
    AS ACCESSTYP_ID ACCESSTYP.ACCESSTYPCD%TYPE
    BEGIN
         SELECT ACCESSTYPCD
         INTO ACCESSTYP_ID
         FROM ACCESSTYP
         WHERE ACCESSTYPCD = 'WWW';
    END;

    I found out I forgot to put ";" after the declare.
    How do I test it call this stored procedure from
    Oracle SQL Developer.
    create or replace PROCEDURE Test_VL
    AS ACCESSTYP_ID
    ACCESSTYP.ACCESSTYPCD%TYPE;
         SELECT ACCESSTYPCD
         INTO ACCESSTYP_ID
         FROM ACCESSTYP
         WHERE ACCESSTYPCD = 'WWW';
    END;in your SQL Developer window just enclosed your procedure with a Begin ... End.
      Begin
        Test_VL;
      End;

  • How to create data_block from procedure ?

    hi all
    can anyone to help me :
    how to create data_block from procedure ?
    i want to join 2 or 3 table and use order by
    then show some field in my form
    i can not use view because order by can not use in view
    please send sample code for this procedure
    thanks.

    1) >i can not use view because order by can not use in view
    SQL>create or replace view V_test as
      2  select * from (
      3  select 1 id from dual union
      4  select 2 id from dual union
      5  select 3 id from dual union
      6  select 4 id from dual union
      7  select 5 id from dual union
      8  select 6 id from dual ) t
      9  order by t.id
    10  /
    View created.
    SQL>select * from v_test;
            ID
             1
             2
             3
             4
             5
             6
    6 rows selected.2). >how to create data_block from procedure?
    You must create procedure and use ref cursor.

  • How to create blocks on Procedures? How does one handle I/U/D on the block?

    Hello Gurus,
    How to create blocks on Procedures? How does one handle I/U/D on the block?
    Please give an example.
    Thank You,

    Hello Gurus,
    How to create blocks on Procedures? How does one handle I/U/D on the block?
    Please give an example.
    Thank You,

  • How to use dynamic parameter when a report is created using Stored Procedures

    Hi all,
    any one have the idea of how to use dynamic parameter in crystal report XI R2
    when report is created using Stored Procedure.
    Regards
    shashi kant chauhan

    Hi
    You can create an SQL command in Database Expert > Expand your datasource > Add command
    Then enter the SQL query that will create the list of values to supply to the user
    eg select field1,field2 from table
    Then edit the parameter of the report.  These will be the SP parameters adn can be seen in field explorer.
    Change the parameter type to Dynamic
    Under the word Value click on Click here to add item
    Scroll down to your Command and select one of the values that you want to appear in the list
    e.g field1
    Then click on the Parameters field - this is essential to create the param
    You can edit other options as required
    That should do it for you.
    I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
    Best of luck

  • How to create table using Procedure

    Hi,
    I want to create table using procedure .
    How to write procedure for the table creation?
    thanks in advance.

    Use dynamic sql or DBMS_UTILITY.EXEC_DDL_STATEMENT:
    SQL> desc tbl1
    ERROR:
    ORA-04043: object tbl1 does not exist
    SQL> begin
      2      execute immediate 'create table tbl1(x number)';
      3  end;
      4  /
    PL/SQL procedure successfully completed.
    SQL> desc tbl1
    Name                                      Null?    Type
    X                                                  NUMBER
    SQL> drop table tbl1
      2  /
    Table dropped.
    SQL> begin
      2      DBMS_UTILITY.EXEC_DDL_STATEMENT('create table tbl1(x number)');
      3  end;
      4  /
    PL/SQL procedure successfully completed.
    SQL> desc tbl1
    Name                                      Null?    Type
    X                                                  NUMBER
    SQL>  SY.

Maybe you are looking for