How to create table using Procedure

Hi,
I want to create table using procedure .
How to write procedure for the table creation?
thanks in advance.

Use dynamic sql or DBMS_UTILITY.EXEC_DDL_STATEMENT:
SQL> desc tbl1
ERROR:
ORA-04043: object tbl1 does not exist
SQL> begin
2      execute immediate 'create table tbl1(x number)';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> desc tbl1
Name                                      Null?    Type
X                                                  NUMBER
SQL> drop table tbl1
2 /
Table dropped.
SQL> begin
2      DBMS_UTILITY.EXEC_DDL_STATEMENT('create table tbl1(x number)');
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> desc tbl1
Name                                      Null?    Type
X                                                  NUMBER
SQL> SY.

Similar Messages

How to create report using Procedure.

Hi All,
I want to create report in apex.But i do not have sql code.I have one procedure.Is it possible to create report using this procedure in apex.
CREATE OR REPLACE PROCEDURE headcsv_prc2
AS
   CURSOR cr_header
   IS
      SELECT ood.organization_code, fm.formula_no AS "FORMULA_NAME",
               fm.formula_vers AS "FORMULA_VERSION",
               fm.formula_desc1 AS "FORMULA_DESC",
               DECODE (fm.formula_status,
                       100, 'New',
                       400, 'Approve for Laboratory Use',
                       700, 'Approve for General',
                       800, 'On Hold',
                       900, 'Frozen',
                       1000, 'Obsolete/Archived'
                      ) AS "FORMULA_STATUS",
               DECODE (fd.line_type, '1', msib.segment1) product,
               DECODE (fd.line_type, '-1', msib.segment1) ingrediant,
               DECODE (fd.line_type, '2', msib.segment1) AS "BY_PRODUCT",
               DECODE (by_product_type,
                       'W', 'Waste',
                       'R', 'Rework',
                       'Y', 'Yield',
                       'S', 'Sample',
                       NULL
                      ) AS "BY_PRODUCT_TYPE"
          FROM org_organization_definitions ood,
               fm_form_mst fm,
               fm_matl_dtl fd,
               mtl_system_items_b msib
         WHERE ood.organization_id = fm.owner_organization_id
           AND fm.owner_organization_id = msib.organization_id
           AND msib.organization_id = fd.organization_id
           AND fd.organization_id = ood.organization_id
           AND fm.formula_id = fd.formula_id
           AND msib.inventory_item_id = fd.inventory_item_id
           -- and fm.FORMULA_NO like'%TEA%'
           AND fd.line_type IN ('1', '2', '-1')
      GROUP BY ood.organization_code,
               fm.formula_no,
               fm.formula_vers,
               fm.formula_desc1,
               fm.formula_status,
               fd.line_type,
               msib.segment1,
               by_product_type
      ORDER BY fm.formula_no, fm.formula_vers;
BEGIN
   DBMS_OUTPUT.put_line (   INITCAP ('ORGANIZATION CODE')
                         || ','
                         || INITCAP ('FORMULA NAME')
                         || ','
                         || INITCAP ('FORMULA VERSION')
                         || ','
                         || INITCAP ('FORMULA DESC')
                         || ','
                         || INITCAP ('FORMULA STATUS')
                         || ','
                         || INITCAP ('PRODUCT')
                         || ','
                         || INITCAP ('INGREDIANT')
                         || ','
                         || INITCAP ('BY PRODUCT')
                         || ','
                         || INITCAP ('BY PRODUCT TYPE')
   FOR ch IN cr_header
   LOOP
      DBMS_OUTPUT.put_line (   ch.organization_code
                            || ','
                            || ch.formula_name
                            || ','
                            || ch.formula_version
                            || ','
                            || '"'
                            || ch.formula_desc
                            || '"'
                            || ','
                            || ch.formula_status
                            || ','
                            || ch.product
                            || ','
                            || ch.ingrediant
                            || ','
                            || ch.by_product
                            || ','
                            || ch.by_product_type
   END LOOP;
EXCEPTION
   WHEN OTHERS
   THEN
      DBMS_OUTPUT.put_line ('Error No: ' || SQLCODE || 'Error Msg: '
                            || SQLERRM
END;
EXEC HeadCSV_Prc2
Thanks,
Raghu

RaghuVarma wrote:
I created one report using sql code.(Ex: select * from emp).
But my higher authorities want that for security purpose They will change the code into java.
What "higher authorities"? What "security purpose"?
In this process they changed my code as a procedure.Finally they give that java code.they tell to me please fix in apex.
Do these "higher authorities" know anything about APEX? What does the Java code actually do? Have you asked them how their approach is to be integrated into APEX?
There is no reason why a properly written Java stored program cannot be used in APEX, provided that whatever it is doing makes sense in an APEX/web context, and isn't some nonsense like using DBMS_OUTPUT to generate a CSV.
I tried so many ways.But it is not fixed.Different Different errors will occurs.
Tried what? Demonstrate what you have tried, preferably using examples on apex.oracle.com.
How to solve this.
How to solve what? No clearly defined problem or requirement has been identified.
Describe the the problem/requirement (not your attempted solutions) in detail.
How to ask questions
Re: 2. How do I ask a question on the forums?
Include as much relevant information with your question as possible, starting with:
APEX version
DB version, edition and host OS
Web server architecture (EPG, OHS or APEX listener), platform, and host OS
Browser(s)/version(s) used
Theme
Templates
Region type(s)

How to create table using mysql in LabVIEW

Hii
I am using mysql database Toolkit for my project. In that how to New create a table. Is there any possiblilites to create a table using query...can u send a sample prg ... and inform which toolkit Vi to use....

The SQL syntax for creating a table is:
CREATE TABLE table_name
column_name1 data_type,
column_name2 data_type,
column_name3 data_type,
)The toolkit has a funciton called DB Tools Create Table. That would be the obvious function to use if you don't want to execute a SQL query to create the table. The tooklit comes with examples. Have you looked at them? There's one called Create Database Table that would seem to be exactly what you are looking for.

How to Create Table Using Column Drag and Drop Feature

Hi:
I am new to Oracle SQL dev Data Modeler tool and would like to know if there is a way to create a new table by re-using the existing columns or column groups. The idea is to maintain consistency and save table design time. If columns created previously can be re-used and require drag and drop of column in the right pane, then only new columns need to be manually created.
Any thoughts on this will be appreciated.
Thanks!

Hi Kent
I checked out the video and tried it in Oracle designer, it works and works great!
My other question is that I may have several set of columns that I may want to group depending on the table requirements. Can I have multiple templates and choose which one to apply to?
Also, how do I choose the table where the table template needs to be applied. As I may be interested in applying the table template to selected tables only.
Thanks
Edited by: user648132 on Feb 20, 2012 10:47 AM

How to create TABLE using "Go To Database Home Page"

I installed Oracle 10g Express
The Database Home page is working fine using sys/system user name
I understand that this is also an APEX INTERNAL Application.
Now I installed APEX 3...latest version , the database page has now changed to APEX , Oracle Application Express page.
Also the http://.../apex/apex_admin .. is working, but I dont know where to find the Administration page of Database , which lets creation of database users & tables

Hi
If I understand you problem correctly then you go to Database Homepage, and login using sys/system you can see the homepage with the icons for 'Application Builder', 'SQL Workshop', 'Utilities'.
Here clicking on 'SQL Workshop' you will find 'Object Browser', 'Sql Commands', 'SQL Scripts' and 'Query Builder'.
You can create database objects by entering sql commands in 'Sql Commands' or from the 'Object Browser'->[Create] button.
-Priyanka

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to update the data in sqlserver table using procedure in biztalkserver

Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...

Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

How to create indexes using CREATE TABLE statement

Hi,
Can anyone please tell me how to create indexes using CREATE TABLE staement? This point is part SQL Expert exam (1Z0-047) and please guide me to use which books for this particular exam.
Thanks in advance.

Can anyone please tell me how to create indexes using CREATE TABLE staement?e.g. creating a primary key or a unique constraint will generate indexes along with the create table syntax:
SQL> create table t (a integer primary key, b integer unique)
Table created.
SQL> select   index_name, index_type, uniqueness
from   user_indexes
where   table_name = 'T'
INDEX_NAME                     INDEX_TYPE                  UNIQUENES
SYS_C0016575                   NORMAL                      UNIQUE
SYS_C0016574                   NORMAL                      UNIQUE
2 rows selected.

How to create table.maint.generator and enduser should use using ztcode

Hi,
can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
any help can be appreciated.
Thanks & Regards,
Sandeep.

Hi,
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
some more helps
Check out this thread:
table maintenance
http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
Also, Check out this weblog on table maintenance:
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
<b>how to create a a T-code of that</b>
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
rgds
anver
if hlped pls mark points

....how to create table maintanence generator for a z table and how to use

Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddy

Hi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
<b>
Follow below steps</b>
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka.

How to create data_block from procedure ?

hi all
can anyone to help me :
how to create data_block from procedure ?
i want to join 2 or 3 table and use order by
then show some field in my form
i can not use view because order by can not use in view
please send sample code for this procedure
thanks.

1) >i can not use view because order by can not use in view
SQL>create or replace view V_test as
2 select * from (
3 select 1 id from dual union
4 select 2 id from dual union
5 select 3 id from dual union
6 select 4 id from dual union
7 select 5 id from dual union
8 select 6 id from dual ) t
9 order by t.id
10 /
View created.
SQL>select * from v_test;
        ID
         1
         2
         3
         4
         5
         6
6 rows selected.2). >how to create data_block from procedure?
You must create procedure and use ref cursor.

Operates on two table using procedure

i want to handle two table using procedure in oracle 10g. i have created a procedure like this
CREATE OR REPLACE PROCEDURE sold_car1(
sid soldcar.sold_id%TYPE,
cid soldcar.id%TYPE,
cuid soldcar.customer_id%TYPE,
eid soldcar.emp_id%TYPE,
d soldcar.dat%TYPE
) IS
BEGIN
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd'));
DELETE FROM pcar where id=cid;*
COMMIT;
END sold_car1;
SHOW ERRORS
i have found some errors. how can i do this.

hi
the errors are something like this ''the procedure is created with some errors''.
actually i want to pass 4 parameters in the procedure that will insert in one table and among the 4 parameters by using one parameter i want to delete one row of another table.
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd')); //soldcar is first table
DELETE * FROM pcar where id=cid; //pcar is second table

How to create the pricing procedure for domestic & import.

HI,
Pls any body let me know how to create the pricing procedure for domestic & import.
what is the use of the keys
step condiiton condition type from to manual required statistic subtotal requirement caltype basetype.
how system will work based on this.

Hi,
Please see below WIKI for your reference:
http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
Regards,
Ninad Kshirsagar

How to create table in bisystem

hi,
how to create table in bi system.
My requirement is such like that i want to store data which is used in the routine.
i want to maintain the data dynamically so that i want to create the table.

Hi.........
Same as ABAP only...........using SE11........
Steps for creating table:.
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
Hope this helps......
Regards,
Debjani..........

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to create table using Procedure

Similar Messages

Maybe you are looking for