How do i create an imessage number

how do i create an imessage number, and can i send messages to non iphone/ ipod numbers

planb77, The is (or at least was) an app that added the Messages app to Snow Leopard. I had that before upgrading to ML

Similar Messages

How do I take my iMessage number off

How do i take my imessage number off my phone

So you don't want people to send iMessages to you at your phone #?
Only your AppleID?

Help, how can I create the minor number if

I know my device path is c0t3d2s2. eg. how can create a minor number which will be used as an input to makedevice() based upon the above info. Thanks in advance.

Hi!
The primery thing under Solaris is /device tree. The entries in this
directory, so called device special files or minor nodes, are created when drivers
attached/loaded, usually in attach routine.
The device special files are created under /devices with a help of
ddi_create_minor_node. There is a way to create compatibility links
under /dev like /dev/dsk/c0t3d2s2. How to do it?
Each minor node has so called "node type" (see:
ddi_create_minor_node(9F), /usr/include/sys/sunddi.h).
Solaris has programs family (devfsadm in S8) to make links into /dev,
according "node type"
/usr/sbin/disks - makes links for "node type" = DDI_NT_BLOCK
/usr/sbin/tapes - makes links for "node type" = DDI_NT_TAPE
/usr/sbin/ports - makes links for "node type" = DDI_NT_SERIAL
/usr/sbin/audlinks - for "node type" = DDI_NT_AUDIO
/usr/sbin/devlinks - for "node type" = DDI_PSEUDO and some other types.
These programs are called each time the system is reconfiguration-
booted. They only know predefined "node type" and have some internal
rools, expressed by regular expressions, e.g. for "audlinks":
$ strings /usr/lib/devfsadm/linkmod/SUNW_audio_link.so
((nt)|(te)|(aux))\,((0)|(0ctl)|(d)|(b1)|(b2)|(mgt)|(dtrace))
sound,
sound/([0-9]+)
isdn/([0-9]+)
sound,
sound/
isdn/
mgt,mgt
isdn/
/mgt
audio
ddi_audio
audio
^sound/[0-9]+(ctl)?$
audio
^isdn/[0-9]+/mgt$
audio
^isdn/[0-9]+/aux/0(ctl)?$
audio
^isdn/[0-9]+/(nt)|(te)/((dtrace)|(mgt)|(b1)|(b2)|(d))$
audio
^audio(ctl)?$
SUNW_audio_link: minor_init: regular expression bad: '%s'
((nt)|(te)|(aux))\,((0)|(0ctl)|(d)|(b1)|(b2)|(mgt)|(dtrace))
audio
sound/%d
audioctl
sound/%dctl
SUNW_audio_link: audio_process: can't find match for'%s'
When you buld /dev subtree for your driver you must either to follow
they demands or create links by hand (by script).
You can also set the access rights for the device special files from
within the driver.
You can do it with a help of "add_drv". See -m key. Information from
"add_drv -m" fall into "/etc/minor_perm" and will use each time when
minor node will create.
Vitaly Filatov
Moscow, Russia
[email protected]

How do you create a sequence number in SQL Developer Data Modeler?

I am new to Data Modeler and am looking to create a sequence number but do not know how to do the same using the Data Modeler. Can someone guide me? Thanks.
Edited by: user6710206 on Jun 9, 2010 7:32 AM

I have had found that the following works sometimes when coming immediately after the create or replace package body in a script (although it isn't doing anything for me on invalid package bodies at the moment):
show errors package body <package name>
Because it is inconsistent, you cannot really trust it, which gets you back to Jim's options (open in editor or compile from connection tree) or the old long hand of
select * from user_errors where type = 'PACKAGE BODY' and name = '<package name>'

How do I create an iMessage account for my phone number?

When I go into Messages---Preferences---Accounts--- + ------ the options are AIM, Yahoo, Google Talk, and Jabber. Nothing for a phone number.

Link your phone number and Apple ID for use with FaceTime and iMessage

How can I create a random number and letter in a text field...

Hi All,
I am using application express. I want to get a random number and letter for a text field but not sure how to do this. Say I have a licence form and I want to get the licence number automatically when user wants to create a new licence and it needs to be unique. The format I am looking for is - HQ2631 something like this.
I am thinking I have to create a trigger but not sure how to go about this....
advanced thanks,
Tajuddin

Something to play with:
Your method can generate 26 * 26 * 10000 different licence_ids
Generating one million ids takes 20 seconds but produces between 70000 and 80000 duplicates and is rapidly getting worse (if that is something over 7%, doubling the ids generated that grows to something under 30%)
Just see if you can live with that.
select sum(collisions) all_duplicates,count(*) distinct_duplicates,max(collisions) max_multiple
from (select licence_id,count(*) - 1 collisions
          from (select DBMS_RANDOM.STRING('',2) || trunc(DBMS_RANDOM.VALUE(1000,9999)) licence_id
                  from dual
                 connect by level <= :to_generate
         group by licence_id
         having count(*) > 1
       )Regards
Etbin

How do I create a random number generator?

I know I've done it before...but I can't remember quite how to get it going. I'm creating a math tutor program, which generates two random numbers and asks the user to add them, and if the answer is right they get a message that gives props and if they get it wrong they're told they got it wrong.
I can't get too far because I've forgotten how to make the number generator, so what exactly do you put in to get it?
import java.util.*;
public class AssignmentFour3 {
     private static Random integer = new Random();
     double number1 = 0;
     Random string1 = new Random();
     }

DrClap wrote:
Generally I don't write my own random number generator. I just use the java.util.Random class.I read it as though that that is what he was going to use, but wasn't able to read the API docs to figure out what methods to use. ;-)

HT1689 how can i change my imessage number

My old number was ported over to my new phone, but it's not the number the phone is using to send/receive messages. How do I change this?

Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and replace the old number with the new number
Hope that helps

How i can create activator - serial number for my product?

Hi
I want my product find Motherboard serial and made a activate number for using software.
It must put activate number to a file and save it.
When an user load software it read number from file and permit him to use.
1) How my script can find motherboard serial number?
2) How my script can write and read on one file?
3) Has director lingo any encryptor Function or method?
Thanks

look up info on 'fileio' xtra re: writting and reading files
you can pull lots of computer info out of the win registry HKEY_CURRENT_USER etc. using the above method.
best to use buddyAPI it's easier!
--sets up a gPathName_to_where_I_want_this_file_to_read&write
global gPathName_to_where_I_want_this_file_to_write
set gPathName_to_where_I_want_this_file_to_write to the PathName
-- Writes a Test File
set myFile=new(xtra "fileio")
createFile(myFile, gPathName_to_where_I_want_this_file_to_write & "TEST.txt")
openFile(myFile, gPathName_to_where_I_want_this_file_to_write & "TEST.txt",2)
put "test file" into theText
writeString(myFile, theText)
closeFile(myFile)
set myFile = 0
-- Reads a Test File
set myFile = new(xtra "fileio")
openFile(myFile, gPathName_to_where_I_want_this_file_to_read & "TEST.txt",1)
set ReadFile to readFile(myFile)
closeFile(myFile)
set myFile = 0
put ReadFile

How do you create a customized step list?

I am creating a workbook for some exercises and I want to use a formatted, numbered step list so students can check off the step as they complete it. It might look something like this:
__ 1. some instructions
__ 2. more instructions
__ 3. even more instructions
The numbering would obviously continue from the previous number.
How do I create such bullet/number option?
Thanks

You can certainly get the underscore as a leading bullet:
+Inspector > Text (T) > List > Bullets and Numbering > Text Bullet > Type the underscore _ character however many times you want into the bullet field > click away in the page+
Select the sample of the text and open the Styles drawer:
+Menu > View > Show Styles Drawer+ or click on the reversed ¶ in the blue dot on the toolbar at the top of the window.
Select any *List Styles* name and:
+Right mouse click > Create new List Style from Selection… > Give it a descriptive name+
This will create:
__ some instructions
but without the numbering, which will need to be added manually. To add numbering I think will need some deeper editing of code or xml within the Pages app itself.
I tried combining the numbered list with a leader tab of underscores but one removes the other.
Peter

Create a Delivery Number Manually

Hi All
How i can create the Delivery Number manually
i do not check the box Auto create Deliveries on :
Shipping => Release Sales Orders => Release Sales Orders
i want enter the number manually
Regards
Essam

In the shipconfirmation screen select all the delivery detail lines and from actions choose create or generate delivery(don't have precise wording handy).
Thanks
Nagamohan

HT3965 how do i change the phone number for imessages?

how do i change the phone number for imessages?
i have set up an iTouch for my 10 year old son. To set up iMessaging between him and his parents i used my iTunes account but this picked up my phone number..........i now need to change this but cannot see how to do it in Settings. Any suggestions?

Thanks, but i guess this means i have to create an email address for my son and hs own apple id?
My aim is to link his mobile number to the iTouch but not to give him his own iTunes account....

How do I change the iMessage phone number on my iPad.

Hello:
I've searched and can't find this exact problem in any other thread. How do I change the iMessage phone nubmer on my iPad. It is NOT the same as my iTunes phone number.
My wife and I share an AppleID. When I updated my iPad to iOS6 her phone number became my iMessage phone number. Now, I get all her iMessages between her and her contacts and not my own. The email is still my iTunes account email.

If you go to General>Messages>ReceiveAt and then add an additional Apple ID, if you dont have an other Apple ID, you will have to create a new one. Also, if you dont want to receive your current messages, you can remove the number/Apple ID, but only if you have 2 or more Receiving accounts. (including your current) If you dont want to use iMessage at all, just simply switch iMessage from "On" to "Off"
Hope this helped,
From hamishryan6

How to disable my iphone phone number imessage on old account

So I was on the same apple id as my mother, who told me today that messages were poping up on her ipad. I now created a new apple id because i do not want her reading my messages. On the old apple id, she can click my phone number and recieve my messages, i clicked to send and recieve only on my phone on my iphone and i am frightened half to death. Someone please help on how i can remove my phone number from her imessage list!!!!!!

Read this:
http://support.apple.com/kb/TS4268

IMessage detached from my phone number. How do I reattached as phone number to be the default?

When I send. Text message to another iPhone it is sent via my email address. How would I reattach my phone number to be the default to send and receive the texts? I recently did change my Apple ID password. When accessing settings app on my phone under iMessages there is a send & receive option, however I am unable to select the phone number to create as a default.

Hi there Xjbleasdale,
You may find the information in the article below helpful.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/ht5538
-Griff W.

How do i create an imessage number

Similar Messages

Maybe you are looking for