How do I create multiple crop outputs from ACR?

In CS5.5 my workflow involved selecting a number of RAW files and opening in ACR. I could make corrections as required, but also apply individual crops to each image. For instance, twenty might be set to 10"x8", another ten to 15"x12" and thirty to 8"x6". When I then clicked done. I could run image processor on the files and point to a hotfolder on the network which was watched by the RIP running the printer. The RIP could then pick up the files, composite them, and start the print queue. it was a hugely efficient system.
That now seems to have been given the kiss of death because the crop tool in ACR no longer offers any option other than a ratio. My understanding from these forums is that output size is now governed by the workflow options dialogue box. But the problem with that is that it applies the same output size to every image selected, not to mention the fact that instead of opening one dialogue box (namely the custom crop tool), I now need to open two.
I am at a loss to see how this is a more efficient system. Please give us back the facility to set custom crops with different output sizes, or failing that, can someone explain to me how I now do what I was doing without having to do twice as much work? Otherwise I may as well cancel my CC subscription and go back to 5.5

Are all the file specs that you set up in Image Processor available in the Save Image button in ACR?
If so, your steps could look like this:
With Crop tool, set image to correct proportions.
In Workflow Options, choose preset you made for 10x8.
Click Save Image button, choose preset you made for format/file specs, click Save.
While that is processing in the background, repeat steps 2-3 for the next two image dimensions. The odd one is the 8x6 dimension because it doesn't match the proportions of the first two, so for that one you'd have to go back to step 1.
If you can accomplish your entire workflow in Camera Raw, and if I haven't misunderstood what you need, this could end up being a more efficient workflow overall by saving the trip out to Image Processor.
Of course, this assumes you've set up presets (a relatively new ACR feature) for your standard dimensions and file specs so that you can keep the number of clicks to a minimum.

Similar Messages

How can i create multiple apple ids from the same mac

There seems to be a limit on how many apple ids can be created from the same cpu. Trying to create 100 apple ids for a client to use on ipads distributed to employees i found i could only create three or four before i got the message account cannot be created, contact itunes support. Had the same problem creating multiple itunes accounts through the App Store.

I found this discussion because I need to create dozens of Apple IDs for the faculty and staff of the school for which I'm the IT Director.
This is weak.
Apple, PLEASE upgrade the Apple ID system so it represents the current needs and paradigm.
What am I thinking, Apple (like Google) don't follow user discussion forums, except by accident when an employee sees something and is motivated enough to carry the water for users in need.

How can I create multiple QR Codes from an Excel File?

Hi there,
I am currently trying to set up business cards with a QR Code on the back of each card. Therefore I have an excel spreadsheet, which contains all the data necessary for the business card like name, function, e-mail adress,... the data is then filled in automatically by using the standard function with tags for each column (e.g. table column name is filled in as <<name>> in the specific location on the business card and once executed it is matched with the data from the excel file).
Is there anything which could help me to automate the personalization of the QR Codes?
All the best

For free? Not at the moment. CC does have the ability to create QR codes but only one at a time. In CS6 (perhaps earlier versions?), regular poster/advanced scripter Jongware devised a script to prepare a QR code but again, could only do one at a time.
However, someone did build on Jongware's QR code to do this from an InDesign file that had the necessary information in tagged text boxes and would prepare QR codes accordingly. However, it would leave them in the InDesign file (e.g. not separate EPS/PDFs).
So, a long workaround would be:
install the script and read the thread on the adobe forums (jongware's QR code plus the additional improvement): http://forums.adobe.com/message/4787823#4787823
data merge the current data into the indesign file using the similar structure as the fourth poster in that post had written
once all the QR codes are written, create a PDF of the file and then use one of various methods to break up the PDF into single page files: http://colecandoo.wordpress.com/2013/07/13/breaking-up-is-hard-to-do-indesign-files-into-i ndividual-pdfs-that-is/
It's a lot of work to generate multiple QR codes. A paid solution offered by either Meadows DPS or Woodwing (two companies I have no affiliation with whatsoever) or any other plug-in provider for that matter: http://www.adobe.com/products/indesign/indepth.displayTab3.html may be an alternative that is worth pursuing.

How do I create multiple text files from a list in another file?

I have a text file with data in it:
1. Bristol
2. Bath
3. Exeter
etc
I want to run an action which outputs the following files:
1.txt (contents: 1 Bristol)
2.txt (contents: 2.Bath)
3.txt (contents: 3.Exeter)
I can't work ou how to do this, any help appreciated. Thanks
Dave

Hi mate, thanks for the suggestion. I saw that section in the user guide - but it is only for copying from one library to another - I want to copy from an FCP library to a file structure OUTSIDE FCP. I have had problems with FCP losing media when copying to another library so I just want the files in the Finder where I can see them...
Stephen

How can I create multiple PDF files from multiple InDesign files?

I have 144 InDesign files that I need to create a PDF file for each. I do not want to open each InDesign file to create the PDF's. Acrobat Batch create won't open the InDesign files. Is there another way?

Only InDesign can do this. You may want to look at InDesign automation.

Using data from a spreadsheet, how can I create multiple completed PDFs from a form template?

Note that I am completely new to adobe acrobat.
I have a form template for a completion certificate for students who take a summer workshop where I'm working. It includes data such as their name and the program they completed. I have all the necessary information for each student in an excel spread sheet. Rather than sit here and enter data into the form 300+ times, I want to automate the process. I'd like to be able to specify the spread sheet and either have acrobat just print out all 300, or save them as seperate files so I can print them easily.
Thanks for the help!

Thanks for the response! I'd be interested in writing a script for it (I've actually been researching it a bit already). I'm completely new to Javascript (and scripting) but have a fair level of experience with c/c++ so I feel it shouldn't be too bad. I'll ask here for now, just let me know if I should ask a new question on the scripting forum instead.
I've looked at the Acrobat JavaScript API Reference (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf) a bit but am having trouble finding a way to read the spreadsheet's data in (I was planning on using a csv file). I found Doc.importTextData(), which can parse a tab delimited file and from the sounds of it fill in the forms automatically (though I would much prefer a c style file interface that lets me write the parsing logic). Every time I try to call importTextData it returns -1 though, which means "Warning: User Canceled File Select". When I call it direct from the JavaScript Debug Console I just get a -1, but when I have it execute when I save I get "NotAllowedError: Security settings prevent access to this property or method.". I did a bit of research on that and modified my script to look like:
Autofill = app.trustedFunction(
    function ()
        app.trustedFunction(importTextData);
        app.beginPriv();
        var result = this.importTextData("test.csv", 0);
        app.endPriv();
        return result;
I've also tried running Acrobat as an administrator, but I still get the same error. I could just not be understanding privileges correctly.
My overall plan was:
    for each row in the spreadsheet
        - read the row in from the file
        - fill out the fields in the PDF using the read data
        - save the file with a new file name.
If there is a better method to do this, just let me know.
Thanks again for your time!

Can't create multiple dependent LOVs from the same bind variable

Hi all,
I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
<iterator id="SelectStaticQueryViewObjIterator"
              Binds="SelectStaticQueryViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery1BindParameter"
              Binds="ExecuteWithParams1" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery1ViewObjIterator"
              Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery2BindParameter"
              Binds="ExecuteWithParams2" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery2ViewObjIterator"
              Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
Thanks
George

Hi all,
Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
Cheers
George

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

How can I create a single order from multiple quotations?

How can I create a single order from multiple quotations that I have created by the transaction VA21 ?
Thanks in advance for the answers.

hi
Go to transaction: /nva01
Enter order type : ZOR
Sale org :xxxx
Dist.channel:xx
Division :xx
Press enter
Click on Sale document and select Create with reference
Then enter 1st quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation1 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 2nd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation2 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 3rd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation3 copy to order.
Now save the sale document.
Kindly give reward points
Edited by: WISH on Mar 19, 2008 2:25 PM

How to create a mono output from a mono aux send?

Trying to create a mono output from a mono aux send but option available is only a stereo output. Any way to force a mono output?

Yes - I'm aware of the mono vs stereo. Let me outline more precisely what I'm attempting to do. (By the way, I know this can be done as I do it easily in MOTU's Digital Performer.) The desire is to create a mono send inside Logic that I can then send out through my MOTU interface into a Lex 300 reverb unit. I then take the analog outputs from the Lex 300 and bring them back into Logic. I want the send to be mono as I am mostly sending from mono recorded instruments and voices. So chain would look like this:
Track 1
Send Bus 8
_Bus 8 Mono output_
MOTU 2408 Input
Patch Bay cable
Lex 300 Mono input ///
(now coming out)
Lex 300 Stereo Out
patch bay
MOTU Stereo Inputs 15/16
Logic Stereo Input 15/16
Mix.
The problem with the chain is that I cannot select a _mono output_ - it only allows for a stereo output. I can pan it one way or the other but it still does not seem to function correctly and toggling the mono/stereo button does not change the fact that this is still a stereo output. I hope this does not make it more complicated - it seems like there should be a simple solution. Any ideas? Thanks.

Create multiple sales orders from single service notification?

Is it possible to create multiple sales orders from a single notification (IW51)?
We currently create sales orders directly within transaction IW51 (Create Service Notification). We kick off the sales order creation by pressing the "SALES ORD." button in the notification screen. We're now interested in creating a 2nd Sales Order which would tie directly to the same Service Notification. This is so that we can have the second order assigned to a different account assignment WBS (there are two different parties doing work on the service notification).
I assume you would have to go to VA01 to create the Sales Order, but am not sure how to tie it directly to the service notification from here. I treied to do a create with reference, but there is no ability to create with reference to a service notification.
Do I have to create a second service notification for the 2nd Sales Order for this to work? I want to avoid doing this if at all possible.
I'm running SAP R/3 Enterprise
Thanks for your help!

Hi,
go to vtaa- copy controls for sales document to sales document.
select your combination of order and quotation go to item level. There select value 0(zero) in field positive/negative negative.
No need to change update document flow.
After setting zero in copy control that be told on above. create order with respective to the quotation.
After saving the order.
go to document flow to see the status in between quotation and order.
If you placed setting right, then u certainly observe for quotation status will be open. so you can create no. of sales order with respect to that quotation..
Have a good day..

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How can i create multiple versions of a photo in ios8?

I Often want to create different versions of the same photo....with different crops, contrast, etc and keep them. In iPhoto, that was done with the duplicate command, but there does not seem to be the same capability in ios8. Any ideas?

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How do I create multiple calendars on my iPad?

How do I create multiple calendars on my iPad?

I love stealing another users posts and here is one now ....
You don't create multiple calendars on the iPad.
The iPad is designed to be synced with a supported application on your computer for contacts and calendar events. The contact Groups I've created with the Address Book on my Mac and the different calendars I have with iCal on my Mac are available and kept synchronized with the my iPhone's Contacts and Calendar applications, and the same applies to the iPad.
Long story short, this is done with the supported application on your computer used for syncing contacts and calendar events.
The same principle applies to PC users. You have to sync within iTunes from a supported calendar application on your PC.

How do I get multiple return results from a function

IDBASKET IDSTAGE DTSTAGE
3 1 24-JAN-03
3 5 25-JAN-03
4 1 13-FEB-03
4 5 13-FEB-03
5 3 21-FEB-03
I input is a single IDBASKET number from this table and this function works fine only if it has one IDSTAGE per idbasket. (idbasket#5)
But how do I get it to return a result for an IDBASKET when it has multiple IDSTAGE? (idbasket#3 & 4)
THANKS MUCH,
MAT
SQL> CREATE OR REPLACE FUNCTION status_desc_sf
2 (p_code NUMBER)
3 RETURN VARCHAR2
4 IS
5 lv_output_txt VARCHAR2(30);
6 BEGIN
7 IF p_code = 1 THEN lv_output_txt := 'Order submitted';
8 ELSIF p_code = 2 THEN lv_output_txt := 'Accepted, sent to shipping';
9 ELSIF p_code = 3 THEN lv_output_txt := 'Backordered';
10 ELSIF p_code = 4 THEN lv_output_txt := 'Cancelled';
11 ELSIF p_code = 5 THEN lv_output_txt := 'Shipped';
12 ELSE lv_output_txt := 'No information';
13 END IF;
14 RETURN lv_output_txt;
15 END;
16 /

Duplicate thread:
How do I get multiple return results from a function

How do I create multiple crop outputs from ACR?

Similar Messages

Maybe you are looking for