How do I creater a indicator to read power factor

The problem that I have is not that I can read power factor because our RTU gives me a analog input in numeric fomat for our power factor. I need to know if there is some sort of scaling or indicator ( such as a analog dial type gauge) that can be scaled to read power factor in the below format. We want to see Lag / Lead that mimics our mechanical analog meter at the power plant. Any suggestions?
-0.5
-0.6
-0.7
-0.8
-0.9
1.0
0.9
0.8
0.7
0.6
0.5

Why not just use the dial or guage in the Numeric Controls palette? You can change the scales easily enough to be a -1 to +1.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

How can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi

Hai to all,
how can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi.
as u can see in my block diagram(attached), i can use statistic to read the RMS value for the data but i cant's use it on the FFT Spectrum (mag-Phase).vi .
Thank you for helping.
Attachments:
block diagram.jpg ‏48 KB

hafizzuddin wrote:
thank you for the opinions, for now i am not using any express Vi..
In the long run you will benefit from this. Anyway is your problem solved, or do you need more help?
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

How do I create a hyperlink in Reader XI?

Is there a way to create a hyperlink in Reader? If so, please show steps. Thanks

bjlewis101 wrote:
with Acrobat I can do everything that is in Reader, but not the other way around (correct?).
Correct but at least they supplied a free product just so you can read pdf files.
It's just like Microsoft Word viewer. It's free but it can't do anything but view and print the files. If you want to do anything more, you have to buy Word.
Or, it's like Windows media viewer. You can watch videos but if you want to edit them, you have to buy a much more expensive product.
I could go on...

How can I create dynamic file references in Power Query?

Hi all,
I'm new at using PowerQuery, and so far I like it. There's one thing I am struggling with though... Once I have set up my PoweQuery connections, I don't find an easy way to change the file to which the query is connecting. I'm using it for a monthyl recurring
process, and every month the source data to query on woudl be different. The same in format/structure, but just a different dataset.
Is there a way to make the source setup more dynamic? Can I for example in a parameters sheet enter the name and path of the new source file and update the queries?
Currently the Advanced editor shows me following file reference:
let
Source = Excel.Workbook(File.Contents("Z:\Templates\EMEA\Source Data Tables\EMEA_EW_Source_Data_for_Power_Queries v1.xlsm")),
Thanks in advance for suggestions

Yes, this is something that you can do with Power Query. Here's how you can do it:
Create a table in Excel containing your parameter value. Let's say that it has one column, called ParameterValue, and one row.
Create a new Power Query query that gets the data from this table. Call the query something like ParameterQuery.
In your original query you will now be able to reference values from your parameter query by saying something like this:
Source = Excel.Workbook(File.Contents(ParameterQuery[ParameterValue]{0})),
HTH,
Chris
Check out my MS BI blog I also do
SSAS, PowerPivot, MDX and DAX consultancy
and run public SQL Server and BI training courses in the UK

How do I create a void in a power plane?

I want to remove an area of copper from a power plane but can't work out how to do this.
I'm sure it's obvious if you know how!
Please could a kind soul point me in the right direction?
Thanks
Dave

Hi David:
If the delete island way works, that's great. Still, I think I'm either not explaining my solution correctly or understanding the problem you're describing. Even if it doesn't help you, it might help others, so I'll describe with an example.
The example I'm describing is attached below.
There are three nets (GND, 1, and 2) in the example, and two parts. The two parts are connected by nets 1 and 2 and GND is assigned to the power plane. Once I placed the power plane, I setup the groups and keep out to create the void.
1. Place > Keep-in/Keep-out Area. Draw the area where you want the void. You will have DRC errors at this point, and we will now remove them.
2. We need to assign the net GND to a net group so it can be associated with the Keep-out area. Tools > Group Editor. On the Net Groups tab, click Add, and create a
new group GROUP_GND. Then assign only net GND to the group.
3. Select the Keep-in/keep-out layer in the design toolbox. (The selection filter can be set to Enable Selecting Other Objects). Select the Keep-out area, then Edit > Properties. The Keep-in/keep-out properties should show. On the Keep-in/keep-out tab, check the box next to Net Group. Then click the Options... button beside Net Group. Uncheck All Groups at the bottom, and check GROUP_GND. Click OK, click OK.
4. The DRC errors should be gone because the keep-out only applies to net group GROUP_GND.
I hope this explanation clears up my ambiguity from before, even if it doesn't help in the end.
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo.
Attachments:
ppvoid1.ewprj ‏16 KB

How do you create default Read/Write Permissions for more than 1 user?

My wife and I share an iMac, but use separate User accounts for separate mail accounts, etc.
However, we have a business where we both need to have access to the same files and both have Read/Write permissions on when one of us creates a new file/folder.
By default new files and folders grant Read/Write to the creator of the new file/folder, and read-only to the Group "Staff" in our own accounts or "Wheel" in the /Users/Public/ folder, and read-only to Everyone.
We are both administrators on the machine, and I know we can manually override the settings for a particular file/folder by changing the permissions, but I would like to set things up so that the Read/Write persmissions are assigned for both of us in the folder for that holds our business files.
It is only the 2 of us on the machine, we trust each other and need to have complete access to these many files that we share. I have archiveing programs running so I can get back old versions if we need that, so I'm not worried about us overwriting the file with bad info. I'm more concerned with us having duplicates that are not up to date in our respective user accounts.
Here is what I have tried so far:
1. I tried to just set the persmissions of the containing folder with us both having read/write persmissions, and applied that to all containing elements.
RESULT -> This did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
2. I tried using Sandbox ( http://www.mikey-san.net/sandbox/ ) to set the inheritance of the folder using the methods laid out at http://forums.macosxhints.com/showthread.php?t=93742
RESULT -> Still this did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
3. I have set the umask to 002 ( http://support.apple.com/kb/HT2202 ) so that new files and folders have a default permission that gives the default group Read/Write permissions. This unfortunately changes the default for the entire computer, not just a give folder.
I then had to add wife's user account to the "Staff" group because for some reason her account was not included in that. I think this is due to the fact that her account was ported into the computer when we upgraded, where as mine was created new. I read something about that somewhere, but don't recall where now. I discovered what groups we were each in by using the Terminal and typing in "groups username" where username was the user I was checking on.
I added my wife to the "Staff" group, and both of us to the "Wheel" group using the procedures I found at
http://discussions.apple.com/thread.jspa?messageID=8765421&#8765421
RESULT -> I could create a new file using TextEdit and save it anywhere in my account and it would have the permissions: My Username - Read/Write, "Staff" or "Wheel" (depending on where I saved it) - Read/Write, Everyone - Read Only, as expected from the default umask.
I could then switch over to my wife's account, open the file, edited it, and save it, but then the permissions changed to: Her Username - Read/Write, (unknown) - Read/Write, Everyone - Read Only.
And when I switch back to my account, now I can open the file, but I can't save it with my edits.
I'm at my wits end with this, and I can believe it is impossible to create a common folder that we can both put files in to have Read/Write permissions on like a True Shared Folder. Anyone who has used windows knows what you can do with the Shared folder in that operating system, ie. Anyone with access can do anything with those files.
So if anyone can provide me some insight on how to accomplish what I really want to do here and help me get my system back to remove the things it seems like I have screwed up, I greatly appreciate it.
I tried to give as detailed a description of the problem and what I have done as possible, without being to long winded, but if you need to know anything else to help me, please ask, I certainly won't be offended!
Thanks In Advance!
Steve

Thanks again, V.K., for your assistance and especially for the very prompt responses.
I was unaware that I could create a volume on the HD non-destructively using disk utility. This may then turn out to be the better solution after all, but I will have to free up space on this HD and try that.
Also, I was obviously unaware of the special treatment of file creation by TextEdit. I have been using this to test my various settings, and so the inheritance of ACLs has probably been working properly, I just have been testing it incorrectly. URGH!
I created a file from Word in my wife's account, and it properly inherited the permissions of the company folder: barara - Custom, steve - Custom, barara - Read/Write, admin - Read Only, Everyone - Read Only
I tried doing the chmod commands on $TMPDIR for both of us from each of our accounts, but I still have the same behavior for TextEdit files though.
I changed the group on your shared folder to admin from wheel as you instructed with chgrp. I had already changed the umask to 002, and I just changed it back to 022 because it didn't seem to help. But now I know my testing was faulty. I will leave it this way though because I don't think it will be necessary to have it set to 002.
I do apparently still have a problem though, probably as a result of all the things I have tried to get this work while I was testing incorrectly with TextEdit.
I have just discovered that the "unknown user" only appears when I create the a file from my wife's account. It happens with any file or folder I create in her account, and it exists for very old files and folders that were migrated from the old computer. i.e. new and old files and foders have permissions: barara - Read/Write, unknown user - Read Only, Everyone - Read Only
Apparently the unknown user gets the default permissions of a group, as the umask is currently set to 022 and unknown user now gets Read Only permissions on new items, but when I had umask set to 002, the unknown user got Read/Write permissions on new items.
I realize this is now taking this thread in a different direction, but perhaps you know what might be the cause of this and how to correct or at least know where to point me to get the answer.
Also, do you happen to know how to remove users from groups? I added myself and my wife to the Wheel group because that kept showing up as the default group for folders in /Users/Shared
Thanks for your help on this, I just don't know how else one can learn these little "gotchas" without assistance from people like you!
Steve

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear. You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location. THANK YOU!!!!!!

Have you tried Word for Mac?
You will need to test if links survive export or printing to .pdf
Peter

How would you create a read/display only applicaiton montior role for SRM

Hello,
I was hoping to get some insight on how to create a display/read only SRM Application monitor role. This role would be used by our Service Desk to perform basic trouble shooting before escalating. Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read. How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below. Would a EPP portal role need to be created and if so how> Thank you for any assistance.
   Manually   BBP Component                                                BBP
          Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
           Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
             Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
- Todd

Hello,
I was hoping to get some insight on how to create a display/read only SRM Application monitor role. This role would be used by our Service Desk to perform basic trouble shooting before escalating. Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read. How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below. Would a EPP portal role need to be created and if so how> Thank you for any assistance.
   Manually   BBP Component                                                BBP
          Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
           Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
             Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
- Todd

How can i create a new user with only read rights ?

How can i create a new user with only read rights ?

You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null

How do i create a specific location in a document, that my sales personal will be able to paste in a price offer made in another app (they are using acrobat reader) ?

how do i create a specific location in a document, that my sales personal will be able to paste in a price offer made in another app (they are using acrobat reader) ?

Hi gadi b,
It sounds like you may want to create a form field in your PDF file, which your sales personnel can paste text into. You can use either Acrobat or Adobe FormsCentral to create PDF forms. For instructions, see FormsCentral Help | Create a form or Acrobat Help | Forms.
Best,
Sara

How to Create Icon Get Adobe Reader

How to create Icon "get Adobe reader" at my free website [link removed] for visitor downloading the price list brochure with adobe.
Please help.
Thanks

You don't need to create an icon, you can get it and linking instructions at http://www.adobe.com/misc/linking.html#linking

How to create sharepoint Group with read only permissions using powershell for entire site ?

How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply.

How can i create a custom control, indicator

This is FredFred,
How can i create a custom control switch with 3 or more options,
OFF
ON
STANDBY
Other than rocker, slide, or toggle switch, are there other switches that we can use, hence, the question of creating a custom switch.
Also, is there a way to create an indicator with two options. Enclosed is a jpeg with an example of what i need
Thanks in Advance
Attachments:
sample switches_displays.bmp ‏720 KB

Hello.
Boolean controls can only have 2 possible values, true or false, and there is no way to add more values to them.
If you need more values, then you must use a numeric control (or a string, but I tend to like numerics better, although strings could be just as useful).
There are several types of numeric controls you could use to provide 3 or more options. Attached is a VI which shows a ring, a knob, and a slide each with 3 possible values. In your code, you would then perform different actions depending on the numeric value of your control.
Hope this helps,
Alejandro
Attachments:
NumericsWith3Options.vi ‏14 KB

How to create Charge indicator for Bank account

Dear SAP Gurus,
Please advice how to create charge indicator for bank account under - Set Up Bank Determination for Payment Transactions - activity in automatic outgoing payment configuration.
There is no customizing option in F1 help option. I also try to search in IMG there is also no link for the same.
Early reply would be appreciated.
Regards,
Prafful Kansal
9910432881

Dear,
Charge Indicator is freely definable field, you can put any value you want.....
Regards
Chintan Joshi

How do I create a form that is fillable and saveable with acrobat reader 9

how do I create a form That is fillable and saveable with acrobat reader 9

To create forms on your computer you need to purchase Acrobat Standard.
Better yet, Acrobat Pro.
To provide Extended form Rights you need to purchase Acrobat Professional.
Or Standard, unless you need to enable digital signatures in Reader.

How do I creater a indicator to read power factor

Similar Messages

Maybe you are looking for