How do I determine whether the current page in Forms is the last page.
I have a requirement of printing amount in words using SPELL_AMOUNT Funtion Module, in SAP Scripts.
When I have only one Item Line, I am able to successfully, print the amount.
The moment i have line items pouring to the next page, I see that the I am unable to retrieve the spelled amount from the Function Module.
I think may be i need to find out if the current page is the last page, and if it is so, print the amount on the last page, .i.e., the page where the item lines have overflowed to. How do i find this out.
Can anybody, suggest something.
Regards,
Owais...
I wonder if you could do something like this. Wrap your logic with this IF statement.
/: IF &PAGE& = &SAPSCRIPT-FORMPAGES&
/: ENDIF
Regards,
Rich Heilman
Similar Messages
-
How can we get a alert message in the current browser we are using the mom
how can we get a alert message in the current browser we are using the moment we have entered some data in
the table...
I need a popup alert the moment a new record is added in a table... in apex database is 11g xe..
The idea is I am using a apex application. .The moment new data is added in the table ..I am alerted by a message window..that a new record has been added...
Thanks
Edited by: pauljohny on Jun 11, 2012 10:23 AMpauljohny wrote:
how can we get a alert message in the current browser we are using the moment we have entered some data in the table...
"Current browser"? When viewing anything, or just when using an APEX app?
Ans .. Just when using apex app....even if the apex app is minimised ..The current browser will be the one where I am using apex app...
What i am looking for some scheduler .. to check ..in the table every 5 minute for change if there is a change..then a popup alert be shown...
Split it into [at least] 2 components, database and browser. I'd expect someone calling themself a "DBA Architect" to have some ideas about the database side of things, even if not clued up on JavaScript and AJAX?
I dont think its a database isssue... When i say to check every 5 minutes ..it could be easily done via dbms_scheduler ...I am having issue in getting the popup alert message...
in apex... Dont know wether there is a plugin like modal window(available from skill builder) which shall help in this scenario,.Or might be have to use java scripting and ajax ..
and if it is that (Java scripting and Ajax) .....then shall have to be familiar with java scripting and Ajax...and this shall be a bit time consuming..
Had a feeling this could be accomplished via java scripting and ajax.. ...but still looking for some easy way.. -
How can I see whether songs in iCloud are also on the PC locally (so I can sync them with a Classic)?
In iTunes, on the View menu select 'Hide Music in the Cloud'
-
How does vendor determine if no info record is maintained for the material
how does vendor determine if no info record is maintained for the material
Hi
If you have to determine a vendor, the minimum requirement is Info record. Beyond that, you can ofcourse maintain Source Lists, Quota Arrangements but Info record is bare minimum for automatic determination of vendor.
Otherwise, you have to maintain the vendor manually in th Purchasing docs.
Tcodes for Info record are ME11, ME12, and ME13.
Hope this clarifies.
Thanks -
How do I determine whether a serial number is still good?
I have two serial numbers for Final Cut Studio, and one of them has been used. How do I determine which number is still good without installing the software?
You can't. The only way you can tell if a serial number is already used is if you try to launch FCP and another machine on the same network already has FCP open with the same SN. If the other machine isn't on...or not on the network, then FCP will launch fine. This is how you can install one copy of FCP with one SN onto two machines...a tower and a laptop...but use only one at a time...per the license agreement.
-
i want to transfer my fcp to my new macbook.how can i unstall the current one and activate on the another. i just wonder i can't see any serial number on it!!
Yes.
It's always useful to keep a backup copy as well in case things go wrong.
It's much quicker than having to download again.
You can keep it on hard drives, memory sticks or cards, DVDs etc. -
How to upgrade from the current Photoshop Photography Program to the full Creative Cloud student?!
How to upgrade from the current Photoshop Photography Program to the full Creative Cloud student?!
In the account section it just gives me a full version (the one for 65€)Start here https://creative.adobe.com/join/edu
One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/products/creativecloud/buying-guide-education.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
ID Proof http://www.adobe.com/store/au_edu/academic_id.html -
How to fetch the current login user name at the BI system
Hi,
In our scenerio we need a query to fetch the current login user name at the BI system. Would you please suggest the possibilities?
Thanks and regards,
PradipHi,
The current login id will be available in text elements of query.
Regards
Akhan -
I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view
the email due to this message.
For the record, I am running W7 Ultimate x64 and connected via Excange Server. I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
to that.
What's up?Hi,
I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
"Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
set it as the default mail client."
You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
will try my best to help you.
Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
===================
1.
Click Start.
2.
Type "default programs" in the
Search box.
3.
Click Default Programs under
Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Suggestion 2: Start the Outlook program in safe mode
==============
1.
Click Start, point to All Programs, and then point to
Microsoft Office.
2.
Press and hold the CTRL key, and then click the Outlook program you want to start.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
Disable add-ins
Click
File menu, click Options >
Add-in, click Go button in the Manage:
Com-in Add.
Check if there are any add-ins,
clear the checkbox to disable them.
Close the Office program and
restart it.
Add one check back each time to the list of Add-In,
restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Suggestion 3: Test the issue with a new Windows user account
==============
We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
For Windows Vista/Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
is anything I can do for you, please feel free to let me know.
Sally Tang -
I found this fantatic post regarding querying the user profile service
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx?pi47623=2#comments
However i have an issue whenever the form is opened again either to view or edit, it displays the current users information
instead of the value of the person who completed the form in the first place.
Please help me, I'm turning more grey each minuteI think it is how the current user information is stored based on your logic.
You might be quering current value again when loading the form (Form load Rule).
you have to tweak your logic, after the user submits the form you can set the username to the one who saved it.
or in form load, write a logic to see if the form was not saved before and then query the username( by using internal field like "formstatue")
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you -
Cannot provide the current ABAP master system because the responsible ..
Hello,
I am facing the problem that my UWL is not working. In the trace log I can see the following message:
Cannot provide the current ABAP master system because the responsible system landscape could not provide the system object.
Could someone tell me how to set up the system for th SAP_LocalSystem? It could be that I deleted a system to much
Thanks,
VanessaHi,
check in the Portal System landscape your system with the alias name SAPReferenceSystem especially the Logonmethod that is maintained there in. Is it saplogonticket or UIDPWD?
In case of UID/PWD change the logonmethod to Saplogonticket. Then you will see the system to choose as referenece system as only systems are shown in the reference system drop down box which have the logonmethod saplogonticket maintained.
Select the system as reference system afterwards and check if the mappings are working fine after a restart of the J2EE engine. You will need to restart the j2ee engine in order to make the reference
system change active.
Cheers,
Anja -
Job skipped: An execution in the current run or one of the previous runs wa
What does it means this error when jobs fail and how can be avoided? That is really boring..
Skipped Reason: An execution in the current run or one of the previous runs was suspended by the system.
Thanks
RosarioIt means exactly what it says. One of the previous runs of this job is in a Suspended status. Look at all the past executions until you find a Suspended run, then either resume or stop it.
-
Lync 2013 generates repeated messages stating “Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.”. Events that
seem to generate messages is disconnecting and re-connecting to a network but it also happens randomly and the messages will stack up during a working day. Everything seem to work OK but it is an annoyance. The computer is upgraded (uninstalled first)
from Office 2013 ProPlus to Office 365 ProPlus. Outlook (Desktop) is default mail client. 64-bit Windows 8.1 Enterprise, 64-bit Office (both before upgrade and after).
(Links removed to remediations I've tried)
Made no difference what so ever and the messages continue. What's next?
I posted the above to the Office 2013 forum (unfortunately I'm not allowed yet to post a link to that posting) but due to the fact that the computer affected by this is a networked domain computer I've been redirected to this group instead. I
was asked some additional questions ing the other forum regarding the problem:
Are you able to send mails from other applications like Word or Excel?
NO
Is the PC connected to any Domain/Server? YES
Is this an issue with one PC only. NO - affects all computers that once had Office 2013 Pro Plus installed and now has Office 365 Pro Plus (Originally I posted this question in the Office 365 community but was directed to first the Office
2013 forum and now this forum)
Right click on any file and Click on Send to-> Mail Recipient and check if you are able to send mails using Outlook.
NO
Also check if the Lync add-in is enabled in Outlook.
Start Outlook
Click the File tab.
Go to Options.
Click Add-ins.
Check if the Lync add-in is enabled. YES
My last posting in the other forum contained the following additional information regarding our problem:
As far as we can see installing 32-bit Office 365 Pro Plus using click to run makes no difference.
We do not send any mails from Lync, Lync is however the process that generates the message most frequently (as Lync seem to react upon network events).
Other processes that have Outlook plugins may also be the parent of the message popup (third party applications).
Yes the Lync add-in is enabled. Lync functionality in/from Outlook seem unaffected.
It is not possible to send emails from other applications (explorer, word, excel etc.) ie. right clicking and send to generates the messages and
a follow up error message concerning lack of MAPI enabled e-mail.Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Hi,
If save and send as attachment used in MS Office 2010 then outlook 2010 displays error "Either
there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010"
Windows 7 32 bit Enterprise edition and Offoce Professional plus 2010 32 bit is installed in the machine.
I have followed the below troubleshooting steps but still getting the same error.
Method 1:
Followed the Microsoft fix
http://support.microsoft.com/kb/813745
1. On the Windows taskbar, click
Start > Run.
2. In the Open box, type the following text:
3. regedit
4. Press Enter.
5. Go to the following registry key:
6. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
7. In the right pane, right-click
the following registry value:
8. PreFirstRun
9. Click Delete
10. Click Start, and then click Run.
11. In the Open box, type regedit, and then pressENTER.
12. InRegistry Editor, locate the followingsubkey in the registry:
13. HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
14. Select thesubkey, and then pressDELETE.
15. Click
Yes.
Method 2:
Repaired Office
Method 3:
fixmapi.exe. Mapi32.dll
Method 4:
Created the below registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Offlce\15.0\Outlook
Create the following String value if it does not exist: Bitness Set the String value for Bitness to the following if it is not already set to x86
Method 5:
Compared the installed applications
Uninstalled the below program :Microsfot Visuall C++ 2008 Redistributable - x86 - KB2467175" and installed "Microsfot Visuall C++ 2008 Redistributable - x86 - 9.0.21022"
Please help to solve the issue.
Regards,
Boopathi SHi,
Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
in Office applications, like Excel or Word?
Is this an issue that come up recently? Have you ever made any changes to your system?
If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
http://support.microsoft.com/kb/223877
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I would like to format cells with time only. when I enter a time of day the current date is still in the cell which is not necessarily so. THere are no options for just date .
christine275 wrote:
... (this is a time worked by date and not always entered on the date worked)--
"Time" in Numbers is always "Time of Day", and is always part of a Date and Time value. "Amount of Time" is a Duration value, which may be displayed in a similar format to "Time of Day," but is a different type of value.
If you are entering the number of hours and minutes worked, format the column as Duration, set the units and the format in which you want to have the value appear.
The Date column will still contain a Date and Time value (Jan 1, 2011 00:00:00 in the cell shown in the example), but the "Time Worked" cells will contain only a Duration value.
Incidently, the Date in A2 was entered as "jan 1" (without the quotes). Numbers automatically adds the current year and the default time value, then displays the result in the closest format to what you've entered, or in the Date and Time format you have chosen.
The Duration value in B2 was entered as 3:15 (as displayed). Note that in the entry bar the duration is displayed as 3h 15m, probably to distinguish it from a similarly formatted (Date and) Time value.
Regards,
Barry -
Is it possible for a iPod touch to get a virus when downloading free games off the internet? If yes, is there an antivirus program to protect the ipod. and can some of the current apps be saved from the virus damage?
I had one game permanently just stop working, it usually does crash, but that last time it just went bad, I don't know the reason, I tried powering off iPod, relaunching game, but the game never worked again. I think it corrupted its own save file or some of its own data.
Have you tried another game or app, do those work? If they do, then I guess you know where the problem lies, but if they all stop working, then what about apps, can apps launch?
Lastly, apps from the app store are checked by Apple, so they are clean.
Maybe you are looking for
-
Automatic Message Processor Assignment In Service Desk Message
Dear Expert, We have configured Service Desk as per the web log in the following link [/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i|/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-pa
-
Error while creating a temp queue (JMSException sayin .Destination dosnt ex
i will just post part of my code Properties env = new Properties(); env.setProperty(Context.INITIAL_CONTEXT_FACTORY, "org.jboss.naming.NamingContextFactory"); jndiContext = new InitialContext();
-
Apply exakt steps from History log file to another image?
Alright. If you edit an image and the history log option is turned on, you can look at the exakt steps you've made with all the settings for the individual tools and effects used. Also steps you make can be recorded with the actions tool. My question
-
Premiere Elements 12 Effects-Panel not working
Hi there! I've recently updated to Elements 12 (from 10) and I am more or less happy, but since today, I can't use the effects-panel anymore. When I click any effect, the options won't pop up (see attached screenshot). Does anyone know what to do? I'
-
When is am attempting to add more than 8 items the action is not loading. Here i show below, Action implement public class AddDesigAction extends Action { String target = null; public ActionForward execute(ActionMapping mapping,ActionForm f