How do I duplicate the entry to a set of fields when a box is checked?

I already know how to duplicate specific fields. I don't want the field duplicated if a certain box is unchecked (this would apply for a set of seven different boxes, that when the check box is selected, all seven fields would copy their respective matching fields).
Example:
Billed Address    vs.   Service Address
Sometimes these are the same and sometimes they aren't. I need the option to copy the billed info to the service address if it is the same so I don't have to type in duplicate information.
Thanks!

Create 2 text fields and a check box.
Use this as the mouse up script for the check box:
if (event.target.value!="Off") {           //If checkbox is ticked
this.getField("Textbox2").value = this.getField("Textbox1").value;         //Make the contents of the two text fields the same. Replace with the names of your fields.
else this.getField("Textbox2").value = "";          //Clear Textbox2 if checkbox is not ticked

Similar Messages

  • TS3999 how to remove duplicate Birthday entries in icloud on my PC

    how to remove duplicate Birthday entries in icloud on my PC
    The Birthday entries on my iPad are ok.

    Welcome to the Apple Community.
    The following article(s) may help you.
    Resolving duplicate calendars

  • How to reset all the entries wo exiting the program

    Hi How to reset all the entries from the third and last wrong entry and back to first entry wo closing program. It works with the first and second wrong entry, not for third wrong entry.
    Attachments:
    access.vi ‏59 KB

    The reset button does not work because when anything is entered in the operator field, and you press "reset", two events occur (1) a change is detected in the operator field and (2), a change in the reset is detected. Event (1) occurs first stopping the loop. The reset case is thus never reached.
    One solution would be to sense the reset state in the "operator" event. You need to keep the loop running if reset is pressed. (See attached modification.)
    Some other suggestions: Notice that I also made a data dependency between the case structure and the while loop. Without this, there is no guarantee that the case structure executes before the while loop and you might generate a race condition with unexpected results. I also re
    moved the timeout event, it doesn't seem to do anything. The three text fields should be set to "limit to single line" in this application so fields can be finished by hitting the enter key).
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    accessMOD.vi ‏65 KB

  • If you make a picture in pages.... how do i duplicate the image on the same page multiple times????????!!!!

    If I make a little picute in pages ... HOW DO I DUPLICATE THE IMAGE MULTIPLE TIMES ON THE SAME PAGE!11?????!!!!

    Or you can hold down the Option key while you click on the image and drag to create a copy. Then Select All and repeat. Repeat again, each time doubling your image count. You may, at an early stage, want to align your photos so that they will be in position when you Option-Drag the next set.
    Walt

  • How do I print the entries in my Music Library, i.e., a list of my albums?

    How do I print the entries in my Music Library, i.e., a list of my albums?

    If you go to your library view and right click on library, you should be given th option to export a song list as a .txt file.
    It is not very nice to work with, but it will import in to a spreadsheet such as Excel where you can play around with it.
    Added: Oops I misread your question, what I said lists tracks not albums!

  • Please suggest how can we invoicing  the entry in the system against  purch

    Dear sap guru's,
                 Please suggest how can we invoicing  the entry in the system against  purchase order no- 4500133826 because it is a return purchase order.

    Hi SubhadipRoy,
    As Satish posted, the solution can achieve your goal. In addition, you can right click the Chart Series Labels and Series Label Properties, and then select Number in the left pane, finally select Scientific below the Category option. The data label may not
    overlay. Or you can enlarge the chart.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • How can I allow the application to line through a field that has been locked after being digitally signed?  We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

    How can I allow the application to line through a field that has been locked after being digitally signed?
    We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information.  However we are receiving an error when attempting to enter data  in the field which we have this edit.  Error property: line through cannot be set because doing so would violate the document permission setting.  any idea how we can get around this issue?

    You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

  • How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?

    Someone else posted ths question a month ago, but still no answers.  Anyone?
    How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?
    Windows XP, SP3 operating system recently re-installed so I also reinstalled my printer software.  Now, for some reason, each time I turn my computer on, my HP Photosmart C4100 all-in-one photosmart premier software opens.  It is not in my startup.  This slows down my computer terribly, which is why I never used the program before my re-install.  How can I disable this feature?  I only print, I don't use it for photos.
    Any help here is appreciated.

    Run msconfig.exe from the start button (type in msconfig).  When it comes up go to the Startup tab and find and deselect the HP product you do not want to start.  Save and reboot computer.  Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail

    In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail? I want to click on a mail and read this in the preview pane only without showing it as read.

    Not possible. In order to read an email in the preview pane requires opening the message. You can mark a message that you've read as unread after reading it.

  • How do I change the way that my company name appears when googled?

    How do I change the way that my company name appears when it is googled?  Currently it only shows up as part of my company name followed by the website listed below and then the start of a description.  I would like to make it so my entire company name show up as the title when searched.  I used iWeb to create the site.  Please Help!  Thanks:)

    Put the whole company name in the title tag...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html

  • Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format.  How can I get the Apple Mail format to come up when I click on share?

    Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format.  How can I get the Apple Mail format to come up when I click on share?

    iPhoto preferences - set the email client to Mail
    LN

  • How do I disable the sound effect on my MacBook Air when adjusting the volume

    how do I disable the sound effect on my MacBook Air when adjusting the volume

    Thanks Ralph, that fixed it, I did uncheck that box earlier however I had not restarted the computer. Thanks again.

  • How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

    How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • How do I change the default from CS6 to Photoshop CC when I open a photo from Bridge CC?

    How do I change the default from CS6 to Photoshop CC when I open a photo from Bridge CC?

    Thank you. That works when I double click a RAW image, (opens in ACR then when I open from there it goes to CC)  but when I double click a jpg it goes straight to CS6. I'm hoping there is a way to change the default, but haven't found yet. I don't want to remove CS6.

  • How can I change the preview in imessage on a mac, when notifing me?

    how can I change the preview in imessage on a mac, when notifing me?
    I want it not to preview, just to show me the name of the person sending me the message, not the name of the person sending the message and the message they wrote.

    While we all have MacBooks in this forum not all of us use iMessage. There's an iMessage Support Community where everybody uses iMessage. You should also post this question there to increase your chances of getting an answer.  
    https://discussions.apple.com/community/mac_os/messages_beta

Maybe you are looking for

  • Issue in deleting temp file.

    Hi experts , i am using Oracle 10g and my database is in archive log mode my default temporary tablespace is temp and there are 3 tempfiles in it by name temp01.dbf,temp02.dbf,temp03.dbf i am trying to drop temp03.dbf through sql prompt sql > alter t

  • Help... white screen

    Ok i was downloading a new adobe flash update for mac and when i went to install it asked me to close out of any browsers.... so i did.... then it starts running slow and freezes up which is just what computers love to do.... not so much with macs th

  • Is it possible to get and Set attribute value in OVD through JNDI or Java

    Hi, I have a requirement to read an OVD Attribute value from a Jsp Page and set the Attribute value in OVD. Is it possible to achieve it through JAVA/JNDI code, Any pointers or code snipplet are welcome. Thanks Ak

  • Is it possible to connect the dock connector with Hex Axis Wallet?

    Or is the elastic band in the way?

  • Audit log level

    Hello there, When i update an attribute to be multi-value in the schema section of DSCC, i want to see update in audit log. Now with default audit log level, i can see only the following but it does not show what attribute and what value is being mod