Audit log level

Hello there,
When i update an attribute to be multi-value in the schema section of DSCC, i want to see update in audit log. Now with default audit log level, i can see only the following but it does not show what attribute and what value is being modified. Is there audit log level i should set to ?
dn: cn=schema
changetype: modify
replace: modifiersname
modifiersname: cn=admin,cn=administrators,cn=dscc

Hi,
You hit defect 6997464 due to the fact in-memory schema entry is managed differently from the other entries.
Please contact your local Oracle support representative to get a relief if needed.
Regards
Sylvain

Similar Messages

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

Regarding different logging levels in audit trail

Hi everyone,
where to find various logging levels (like 1-10) of audit trail in oracle...if so how to set that logging levels....reply please

Auditing can be set with below option in oracle.
AUDIT_TRAIL = { none | os | db | db,extended | xml | xml,extended }
http://docs.oracle.com/cd/B19306_01/server.102/b14237/initparams016.htm

SharePoint 2013 audit log unexpected error

In one of my SharePoint 2013 site collection, when i try to save a audit log, i get unexpected error. It worked fine before last week and no any special setting has been applied before the issue appeared. The issue doesn't appear in other site collection.
i have tried to reproduce the issue with farm admin account and site collection admin, no success for all these accounts. However, i can see access denied error in the ULS log although i think the permission is not the problem. You may check the ULS log below.
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xC33B005
2jtj Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Unified Logging Service c91s
Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtk High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtq High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jx8 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s03 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s02 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jw0 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 06/19/2014 10:48:07.68, Original Level: Verbose] SQL connection time: 0.064296296654057
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General 8nca
Medium Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32
errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Runtime tkau
Unexpected System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在
System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General ajlz0
High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)
在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)
在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44

i have added the account to the local admin group of SQL Server and SharePoint Server. the issue remains. it is the system admin of the SQL server.
Logging Correlation Data
Medium
Name=Request (POST:https://xxx/_layouts/15/CustomizeReport.aspx?ReportId=df9e0f20-f356-4115-9286-ac6eecbc03ce&Category=Auditing)
Authentication Authorization
Medium
Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|tlw\farmadmin, ClaimsCount=28
Logging Correlation Data
Medium
Site=/
Information Rights Management
Medium
Information Rights Management (IRM): Requesting user is System account.
Files
High
UserAgent not available, file operations may not be optimized.    在 Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean
disposeIlb)     在 Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult)     在 Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     在 Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
String& redirectUrl, Boolean& ObjectIsList, Guid& listId)     在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
bytes)     在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound)     在 Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
virtualPath)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate)     在 System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
在 System.Web.UI.Page.ApplyMasterPage()     在 System.Web.UI.Page.PerformPreInit()     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest()     在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     在 System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error)     在 System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     在 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus)     在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
Files
Medium
Spent 0 ms to bind 29783 byte file stream
Monitoring
High
Leaving Monitored Scope (GetFileAndMetaInfo). 执行时间=17.6751425083646
Monitoring
High
Leaving Monitored Scope (GetWebPartPageContent). 执行时间=17.8435806939653
OpenXml
Medium
OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\FarmAdmin\AppData\Local\Temp\tmpBFE2.tmp, fcm=3)
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:33.08, Original Level: Verbose] SQL connection time: 0.0727483919888626
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:35.00, Original Level: Verbose] SQL connection time: 0.07969118458531
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
0xC33B005
Assert
ShipAssert location: (0) condition:   StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xC33B005
Assert
ShipAssert location: (0) condition:   StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:36.86, Original Level: Verbose] SQL connection time: 0.0706353681551612
General
Medium
Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED))   在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode,
IntPtr errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean
disposing)     在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Runtime
Unexpected
System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED))    在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
General
High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED))     在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset,
Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)     在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()
在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable
query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.HandleError(Exception e)     在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest()
在 System.Web.UI.Page.ProcessRequest(HttpContext context)     在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     在 System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously)

Issue with Audit Log report in SharePoint 2010

I have enabled REPORTING feature at site collection level and configured the site collection audit settings. I tried to generated Audit log reports, most of the time it keeps on processing as shown in fig.It
keeps on processing, never comes to report generated successful message. how to overcome this issue?

i'm facing same issue, even when i tried to generate report for limited limited period(5 days) for a particular event(ex: delete or restore items (or) edit items).
I think, the below reference may guide you solve your issue
http://sharepoint.stackexchange.com/questions/17151/how-often-should-the-auditing-log-be-cleared-to-not-affect-performance
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

I got warning in audit log but I don't get any alerts...

Hello,
I have File Adapter sender with FCC.
Because I was curious how FCC will behave when invalid file is used as a source file.
I deleted much of the contents in the source file and the File adpater with FCC read it.
In communication channel monitoring in RWB, I got this message in Audit log.
"Empty document found - proceed without sending message".
However, I cannot find this message anywhere else... Either in Message Monitoring (RWB) or SXMB_MONI (SAPGUI).
Also, I don't get any alerts.
How do I get alerts when file is not processed by file adapter?
Also, how do I view alert view for this kind of error?
Thank you.
-Won

Hi Won,
I suppose that you have checked alredy that your alerts are setup correctly and rules are defined for it.
First, you might set the log level of the file adapter to debug - you should see the issue in the NWA log.
Should PI try to generate an alert but fails, you would also see it here and locate your problem.
But, my opinon is that your chances are not very good to get an alert in such case. SAP decided for which issue they issue an alert and for which not.
When you have an empty file in the file adapter, it seems that SAP thiks that this is not to critical and therefore they don't issue an alert.
The reason why you dont see it anywhere else is, that the adapter generates a message id only when there is something to make a message. Empty file means no message and you can not see it in the monitoring tools.
best regards,
Markus

Audit log output!!!!

Hi,
I have enabled object Auditing on our production Database.
Audit log destination i have given in OS level.(AUDIT_FILE_DEST='XXX')
In Audit log it is showing statement id only.
How can i know statement????
Below is the output of my database Audit log.
Thu Jun 26 11:48:10 2008
SESSIONID: "13194352" ENTRYID: "1" STATEMENT: "122" USERID: "SYSADM" ACTION: "103" RETURNCODE: "0" OBJ$CREATOR: "SYSADM" OBJ$
NAME: "PS_BUYER_TBL" SES$ACTIONS: "---------S------" SES$TID: "5682" OS$USERID: "fscmadm"
Thu Jun 26 11:49:33 2008
SESSIONID: "13194352" ENTRYID: "2" STATEMENT: "136" USERID: "SYSADM" ACTION: "103" RETURNCODE: "0" OBJ$CREATOR: "SYSADM" OBJ$
NAME: "PS_BUYER_TBL" SES$ACTIONS: "---------S------" SES$TID: "5682" OS$USERID: "fscmadm"
Thu Jun 26 12:59:35 2008
SESSIONID: "13194352" ENTRYID: "3" STATEMENT: "2941" USERID: "SYSADM" ACTION: "103" RETURNCODE: "0" OBJ$CREATOR: "SYSADM" OBJ
$NAME: "PS_BUYER_TBL" SES$ACTIONS: "---------S------" SES$TID: "5682" OS$USERID: "fscmadm"
*******************************************************************************************

Hi Saagar,
Thanks for your responce!!!
the doc which u post is for 10g
But in mycase my database is 8.1.7
& i have enabled object level auditing
In my audit logs i am not getting SQL statements (See above output)
can u please tell me how to find SQL statements.

Sm19 audit log

hi friends,
I have activated audit log and i can able to view log with SM20. But I have one doubt .......is that audit log occupies space in file system only (or) Database level only? or it occupies both? is it possible to get this audit log from any table? never mind please clarity my doubt.
thanks
nani

Hi,
Please check below link.
http://help.sap.com/saphelp_nw04s/helpdata/EN/03/37dc4c25e4344db2935f0d502af295/content.htm
Anil

Audit logs on Windows 2008 works different when file is modified from UNC path

Hello All,
Here i have a strange situation with the generation of audit logs when folders\files are changed locally(my computer) on the server (vs) from the UNC path
(\\servername\drive$\folder\....).
File Server : Windows 2008 R2.
Audting enabled and SACL set on the folder level.
Enabled advanced auditing for Audit Object Access and enabled the force sub category audit settings on vista \ window 2008 policy via GPO and also verified that the sub category is set.
also set SACL on one folder on the R drive. (\\servername\r$\<folder>\<audited folder>
auditpol /get /category:"Object Access"
Object Access : File System
Success and Failure
Situation : 1
When i make any manipulations (traversing \ listing \ adding or deleting folder or files) on the server locally from my computer ---> . r drive --> folder --> audited folder , i get the event id generated (4663) with all the correct
information.
For ex: created a new txt file.
Object: Object Server: Security, Object Type: File, Object Name: R:\Audits1\folder1\New Text Document.txt, Handle ID: 0xcb4
Process Information: Process ID: 0x1bac , Process Name: C:\Windows\explorer.exe
Access Request Information: Accesses: WriteData (or AddFile) AppendData (or AddSubdirectory or CreatePipeInstance) , Access Mask: 0x6
Situation : 2
When i make the same manipulations (traversing \ listing \ adding or deleting folder or files) on the server or remotely via the UNC path \\servername\r$\folder\audited folder or DFS share or \\servername\<sharename>
, i dont get the event id generated (4663) with the needed information.
For ex: created a new txt file.
Object: Object Server:
Security , Object Type:File ,
Object Name:
R:\Audits1\folder1\New Rich Text Document (3).rtf , Handle ID:
0xa3c
Process Information: Process ID: 0x4, Process Name:
Access Request Information:
Accesses: WriteData(or addfile), Access Mask: 0x100
In the second situation process name is empty (for the file events) and also found that the logs generated are very less compared to the first situation.
Please suggest if there is any fix with this.
Thanks,

Enable the following auditing on the server either through domain
policy or local policy:
Audit logon events - Success
Audit Object Access - Success
On the Auditing tab, add Everyone with the following audit settings.

Runtime error for Audit Log reports

Hi,
I have activated Reports feature at Site Collection level and then tried to run custom report for Dashboard library under Audit Log Reports but I got Run Time error. I tried on my local machine and on server.
Can any body let me know how to resolve this issue to get custom report?
Any help would be appreciated.
BELOW IS THE ERROR MESSAHE:
Server Error in '/' Application
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed
by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
AEDLA.

The audit log reporting is kind of tricky to work with...until you know what you're doing.
Some things to check: Do you have the Reporting feature enabled? Do you have auditing enabled on sites in this site collection? Have any events been triggered that would have written to the audit logs? Did you specify an output library
for the report? Will the report have any data?
Also, look at the SharePoint logs in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\ and let us know any "Unexpected" errors.
Bob Guidinger
Please remember to click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

Diff bteween trace,log and audit log

Diff bteween trace,log and audit log....?
Harsha

Hi,
Audit Log :The adapter engine uses the messaging system to log the messages at every stage, This log is called the Audit Log.
The audit log can be viewed from the runtime work bench(RWB) to look into the details of the life cycle of the message. During our journey we will also have a look at the messages that are logged at different stages.
Audit logs are mainly used to trace our messages. In case of any failures, we can easily trace where message stands. we can give the entries for the logs in UDFs, custom modules etc..
Audit logs are generally gives us the sequence of the steps from where the message is picked up with file name and path and how the message is sent to the I.E pipeline..it also shows the status of the message like DLNG,DLVD like that...generally we look into the audit logs if there are any errors in message processing...
It gives the complete log of your message.
Go to RWB --> Component Monitoring --> Adapter Engine --> Communication channel Monitoring --> Select the Communicatin channel --> click on use filter --> then click on the Message Id.
Trace Log:
Log file:
A log file contains generally intelligible information for system administrators. The information is sorted by categories and is used for system monitoring. Problem sources or critical information about the status of the system are logged in this file. If error messages occur, you can determine the software component that has caused the error using the location. If the log message does not provide enough details to eliminate the problem, you can find more detailed information about the error in the trace file.
The log file is located in the file system under
"/usr/sap/SID/instance/j2ee/cluster/server[N]/log/applications.[n].log" for every N server node.
Access the file with the log viewer service of the J2EE visual administrator or with the standalone log viewer.
Trace file:
A trace file contains detailed information for developers. This information can be very cryptic and extensive. It is sorted by location, which means by software packages in the Java environment, for example, "com.sap.aii.af". The trace file is used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments on class and method level. The file should be analyzed by SAP developers or experienced administrators.
The trace file is located in the file system under
"/usr/sap/SID/instance/j2ee/cluster/server[N]/log/defaultTrace.[x].trc" for each N server node.
Access the file with the log viewer service of the J2EE visual administrator or with the standalone log viewer.
Thanks
Virkanth

Security Audit Log FULL. What happens??

Hi there,
Can anyone tell me what will happen when the Security audit Log file is full on OS-level. Will the system stop? Is the file overwritten?
Best regards,
Joris

Hello Joris ,
1 ) Is the file overwritten? -> No
2 ) Will the system stop? -> Yes , if there will no free space on drive / file system SAP system will stop.
How to delete :
1.      To access the Security Audit Log reorganization tool from the SAP standard menu, choose Administration à System Administration à Monitor à Security Audit Log à Reorganization.
The Security Audit: Delete Old Audit Logs screen appears.
       2.      Enter the Minimum age of files to delete (default = 30 days).
This value must be > 3.
       3.      Activate the To all active instances indicator to delete the audit files from all application servers. Leave the indicator blank if you only want to delete the files from the local application server.
       4.      Activate the Simulation only indicator if you do not actually want to delete the files. In this case, the action is only simulated.
       5.      Choose Audit Log à Continue
Regards ,
Santosh Karadkar

Audit Logs for Administrators

Hello
How can we audit the Site Administrators or Farm admins when changing site Settings or enabling Features on the web applications or Site Collection level? the Site Collection Audit Logs Does Not
Yasser

Hi,
There isn’t anything like site collection auditing for administrative events like feature activations etc. This info will however be in the ULS if the logging level is set high enough. Obviously there are downsides of a high logging level - lots
of noise in the logs, logging location will get filled up quickly.
Cheers
Matt

Security audit log (SM20N)

hi,
has anyone turned on the audit log in your system ?
please share with me how you make use of this log and what to be monitored.
comment and advice will be highly appreciated.
regards,
kent

I have used and setup the audit log for a several years already and used it on several different release levels.
I can recommend using it and getting to know how to use it. To my knowledge it is the intended tool for security monitoring.
What to monitor depends on the system and events which your processes would not expect:
- Do you want users creating / changing authorizations in production?
- Use of specific tcodes, rfcs or reports (whether successful or not) which you have not restricted yet or perhaps cannot restrict due to some reason.
- Patterns which might form and otherwise go undetected.
- In the event of a breach of security, it is useful for reconstructing events (or other users from the same terminal).
Useful is also the dynamic profiles, which can be used to u201Ctrouble shootu201D or add more information for specific users (like auditors) or events as required without having to restart the system.
I recommend that you have a procedure in place how to deal with analyzing these types of logs and how to react to them! For example if someone logs on at 3 a.m. in the morning and posts some vendor invoices, then they might just be in a different time zone or a job step is running under their user ID to post the records. You should not fire the user because of that...
Protecting the logs and handling archiving and deleting of them is also a topic you should discuss with your u201Cbasisu201D team.
Cheers,
Julius

Alert & Audit Log Purging sample script

Hi Experts,
Can somebody point to sample scripts for
1. alert & audit log purging?
2. Listener log rotation?
I am sorry if questions look too naive, I am new to DBA activities; pls let me know if more details are required.
As of now the script is required to be independent of versions/platforms
Regards,

34MCA2K2 wrote:
Thank a lot for your reply!
If auditing is enabled in Oracle, does it generate Audit log or it inserts into a SYS. table?
Well, what do your "audit" initialization parameters show?
For the listener log "rotation", just rename listener.log to something else (there is an OS command for that), then bounce the listener.
You don't want to purge the alert log, you want to "rotate" it as well. Just rename the existing file to something else. (there is an OS command for that)
So this has to be handled at operating system level instead of having a utility. Also if that is the case, all this has to be done when database is shut down right?
No, the database does not have to be shut down to rotate the listener log. The database doesn't give a flying fig about the listener log.
No, the database does not have to be shut down to rotate the alert log. If the alert log isn't there when it needs to write to it, it will just start a new one. BTW, beginning with 11g, there are two alert logs .. the old familiar one, now located at $ORACLE_BASE/diag/rdbms/$ORACLE_SID/$ORACLE_SID/trace, and the xml file used by adrci. There are adrci commands and configurations to manage the latter.
Again, I leave the details as an exercise for the student to practice his research skills.
Please confirm my understanding.
Thanks in advance!

Audit log level

Similar Messages

Maybe you are looking for