How do I enable BitLocker support (unlock drive) in WinPE 5.0 (on Surface Pro 2)?

Hi,
I have a Microsoft Surface Pro 2 and I am running Windows 8.1 Pro Update 1.
I have been unsuccessful at building an image that provides BitLocker support. I searched around the internet and found many posts. Eventually, I ended up trying to build it with the various added packages I noted. However, in the end,
none worked and this is the message I am getting after booting into my WinPE environment:
manage-bde.exe - Application Error
The instruction at 0xa20afa3b referenced memory at 0x0000013d.
The memory could not be read.
Click on OK to terminate the program
Here are the commands I ended up using to build my WinPE image:
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\WinPE-WMI.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\WinPE-FMAPI.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\WinPE-SecureStartup.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\WinPE-EnhancedStorage.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\en-us\WinPE-WMI_en-us.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\WinPE-Scripting.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\en-us\WinPE-Scripting_en-us.cab"
But even with all that included, I still have the same error about the memory.
Does anyone have a WinPE 5.0 x64 bootable environment working on a TPM-enabled machine? If so, how did you build your custom WinPE environment?
Thanks!

You have to install the MUI files as well... for English:
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\en-US\WinPE-SecureStartup_en-us.cab"
This applies to any package that installs executables, it'll have a seperate MUI package that has to be installed or you get a non-sense error about memory that can't be read. Also, MS thanks for the wonderful error message, really went the extra mile to
throw everyone under the bus.

Similar Messages

How do i enable flash support

I want to watch a webpage that uses flash. When i go to it. It tells me i need to install flash 9.0 or later. But i already have flash and the stock browser can handle it.
The webpage is www.svtplay.se

Current versions of Fennec (Firefox for Maemo) have Flash disabled by default because it causes problems on many pages. We're working on fixing this for Fennec 2.0 so we can enable Flash on all pages.
The "YouTube Enabler" add-on for Fennec 1.1 enables Flash just on youtube.com, where it is known not to cause serious problems:
https://addons.mozilla.org/en-US/mobile/addon/67650
To enable Flash on all sites in Fennec for Maemo (not recomended): Enter "about:config" in the address bar, search for "plugin," and change the "plugin.disable" to "false."
(Firefox for Android does not yet support Flash; we hope to work with Adobe to add Flash support on Android in a future release.)

How can I enable multitouch support in Firefox for Windows 7?

I'm running Windows 7 Pro on a Fujitsu Q550 tablet. I would like multi-touch support, which supposedly was tried in Firefox 4 beta 3. I can't find an installer for that to try it out myself, and I don't seem to be getting the desired results from either the current Firefox (9) or the current beta for it (2). Does it exist as a feature that just has to be enabled? Is there another way (or another browser) that supports multi-touch on Windows?

See the response to your second post for the same question:
https://discussions.apple.com/thread/3563070?tstart=0

How do I enable ESMTP support on my server?

I've been running OSX Server for several months now and all works well. The only frustration is that inbound ESMTP messages always seem to be rejected. This can delay inbound mail by several hours at times. A typical log message is
NOQUEUE: reject: RCPT from dabinett.apple.com[17.151.62.52]: 450 4.7.1 <xxxxxxxxx>: Recipient address rejected: Service is unavailable; from=<[email protected]> to=<xxxxxxxxx> proto=ESMTP helo=<bz.apple.com>

That's likely not something that will be resolved with ESMTP, that's probably greylisting.
Greylisting is an anti-spam technique, as legitimate mail servers will retry and will resend mail messages when the target mail server is 450 busy, where the spam engines do not normally include this retry logic. (Google for further details.)
You can choose to disable greylisting, or to whitelist specific domains, to adjust the thresholds for known domains, or to allow the server to continue to learn about the domains that are contacting your domain using its default setups.
FWIW, ESMTP is typically used for authorized clients that will be sending outbound mail via your mail server, and is not typically used for other mail servers that are communicating with your mail server.
To check the settings, launch Terminal.app and issue the command postconf -n and look for the smtpd_recipient_restrictions entry. You will probably find something akin to this entry:
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
To disable greylisting, enter these two commands:
postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination permit'
sudo postfix reload

How can I enable self capitalization of the pronoun "I" when using my Mac Pro?

I'm trying to see how to enable self-capitalization for the pronoun "I". This would be helpful when starting a sentence and/or when using the pronoun within a sentence. I tried system preferences and substitutions, but that will only work with words that have more than one character. HELP!!! Thanks!

Go to System Preferences>Keyboard>Text. Click the "+" sign on the lower left part of the screen. Add the auto correction so when you press "i", the OS automatically changes it to "I".

Enable unicode support

I have nokia 6500 slide model phone.
How I can enable unicode support for reading "jar" file in regional language, especilly in malayalam language

It is not just about enabling Unicode support (and for all that matters, the phone might already have full Unicode support).
It is a case of having the correct fonts as default/system fonts for displaying the characters.
On S40 based models, you cannot install your own font files to replace system/default fonts.
So, if you want to read/see malayalam language content, and the phone does not support it, you can try a Nokia repair center in case there is a firmware version with support for that language, or you can change to some other phone model which supports the language, or supports installable font files.

Unable to run pse 13 dvd on surface pro while connecting through external dvd drive

Hello, I purchased pse13 DVD and a portable DVD drive to install this software on surface pro having windows 8.1 but this DVD is not detected on surface. Is there a way I can install this software on my surface?

You'll have to figure out why the surface isn't showing the DVD drive. For that you'll have to contact Microsoft or the DVD manufacturer to see if the drive is compatible with your Surface.

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

OK. Start with:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

I have my photos on an eternal USB connected drive. I am trying to import them to PSE. The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.

The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.

"Copy" is normally used when connecting a camera or card reader.
Simply copy or move folders from your external drive to your computer hard drive, then from the Organizer menu click:
File >> Get Photos & Videos >> From Files & Folders
Then navigate to the new location on your internal hard drive.

How to enable Matlab support in Photoshop CC?

How to enable Matlab support in Photoshop CC? I've downloaded zip-file with dylib and m-scripts, however it does not work.
By the way, app.featureEnabled("MATLAB") return false in standalone jsx-script, so I believe it's a Photoshop confiruration issue (I found some suggestion _for previous_ versions, that it can be caused by non-exteneded Photoshop version).
What can I do?

Yes, it'is the place where I've downloaded Matlab "plugin".
Interesting, that Matlab can not start Photoshop CC via pslaunch — Photoshop crashes. However, Photoshop can be launched manually, but calling psmatlab.dylib from Matlab does not work.
It's unfortunate that I can not migrate to Photoshop CC (I've used CS5 before and corresponding Matlab integration worked like a charm). It is possible that Photoshop CC has some "forgotten" Matlab-compatibility option that should be switched on?
It seems weird that app.featureEnabled("MATLAB") return false in Photoshop CC (in returns true in Photoshop CS5 Extended).

HT1937 dear sir my iphone 4 is made of canada ragor currently i am in afghanistan how contact ragor to get support for unlocking my iphone

dear
my iphone 4 made of canada ragor it is locked now how i can contact ragor to unlock my iphone

Hi, kalandary.
Thank you for visiting Apple Support Communities.
To unlock an iPhone the request must be handled by the carrier. Here is the best information when requesting an unlock.
iPhone: About unlocking
http://support.apple.com/kb/HT5014
iPhone: Wireless carrier support and features
http://support.apple.com/kb/ht1937
Cheers,
Jason H.

I have purchase iphone4 from someone,it is not factory unlock ,how can i get it factory unlock,its safari not working and its not showing drive on my computer

i have purchase iphone4 from gray market,it is not factory unlock,how can i get it factory unlock,
its safari not working and it is not showing drive in my computer.

iPhones are sold in carrier-locked and unlocked versions. If the phone has a carrier lock on it, you must contact the carrier to have it removed (you probably need to bring the phone to the carrier for the process). If you don't know the carrier, you won't be able to get it unlocked. US carriers will not remove the carrier lock and it cannot be removed.
How is Safari behaving that makes you say that Safari is not working? The lock status of the phone won't affect Safari, except that if the phone is locked and you aren't using the carrier (and SIM provided by the carrier) to which it is locked, then you can't use the phone or 3G service, only Wi-Fi.
The iPhone should not appear as a drive on your computer, so there's no error there.

Firefox 5 touch support, how do i enable it?

on version 4 you could enable touch support, How or can I use touch on version 5, this is a major feature that I use for work everyday and I do not want to have to change browsers just for this reason.

It appears to be in the experimental stage at the moment as far as I can tell and a fully fledged version won't become available until Firefox 6.0 is released on August 16. That's my assumption based on the following docs. 
* [https://developer.mozilla.org/en/DOM/Touch_events_%28Mozilla_experimental%29 Touch events (Mozilla experimental)] 
* [https://developer.mozilla.org/en/DOM/Touch_events Touch events] 
The reason I'm guessing it's still in the experimental stage is because if you look at the foot of the page under the heading "Gecko Notes" in the second link above, you'll see the following setting: '''dom.w3c_touch_events.enabled'''.
However, I've just checked in '''about:config''' and that value is not present in Firefox 5.0.1
But please hang on for a few hours until one of the Moderators arrives (either ''co-rel, the-edmeister or tonyAE'') and perhaps they can shed a bit more light on the subject.

How do I enable BitLocker support (unlock drive) in WinPE 5.0 (on Surface Pro 2)?

Similar Messages

Maybe you are looking for