How do I enable TELEPHONY advanced config tab for users ?

gents our OIP TAPI Provider needs access by the user. It is by Default greyed out.
I tried to enable the Users GPO with no luck:
USER config > policies > admin templ > network > prohibit Access to the adv.settings item on the adv.menu > ENABLED / DISABLED
but I understand that this is ONLY for Administrators and not for common USERS.
Any help here?
This topic first appeared in the Spiceworks Community

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

Similar Messages

How can I enable the automated drop down for the subject line on the email page

How can I enable the automated drop down for the subject line on the email page as I send more than 300 emails everyday with the same subject line. Before it use to happen in my gmail account but now its not. Please help me as its increasing my work time because I have to type the subject line again and again on each email I send. Please help me guys.

This is usually caused by one or more bookmarks having a long title.
You can check that folder in the Library and shorten long names.
* Bookmarks > Show Al Bookmarks
*Bug 626066 - History, Bookmarks menus too wide because of pages with long titles on 64bits
Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html

How do i enable read or delivery receipt for Mail?

how do i enable read or delivery receipt for Mail?

I entered this code into terminal replacing "your name" with my email address:
defaults write com.apple.mail UserHeaders '{"Return-Receipt-To" = "[email protected]"; "Disposition-Notification-To" = "[email protected]"; }'
I've read it worked for some, but I could not get it to work. Does Mail automatically override this?

How to pause while document printing and wait for user actions.

How to pause while document printing and wait for user actions. (for sample: pressed button). Pause after each printed pages.

Print page by page after considering the user actions!

How to config CDM for user Authorization

Hi Sir,
Can you tell me how to config CDM 4630 for user authorization with different privilege by using radius server
Regards

Here is a link on configuring user authentication on acns.
http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a008008123f.html
Not sure if there is one available for authorization too.

How can I set up an App Tabs for an active site like one of the BBC's radio stations? They turn out to be static and soon out of date.

I have been using an App Tab for static pages within Ancestry. No problem.
But I would like to make an App Tab for one of the radio stations for the BBC network in the UK. (I live in the UK.)
Every time I do so the tab sticks at the time I installed it. No good for listening to current programs 2-3 days later.
Has the introduction of active tabs just arrived with Firefox 5 (which I only installed five minutes ago)?

I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.

How to create per instance jvm.config files for multi-instance ColdFusion Cluster ?

So when we have created our coldfusion 9 instance on solaris all the files and settings of the master instance are copied except the jvm.config file. This means that any changes made here are used for all instances of ColdFusion on that Node. Now I want to play with memory settings for fine tuning of Application performance and I want to do it on one single instance. I want to know the process of creating individual jvm.config files for each instance.
Thanks
Pradeep

Thanks Anit, I did whatever is posted in the KB Article. Now I get this below error #
jrunx.xml.XMLMetaData$CouldNotCreateDocumentException: Could not create document from location 'file:/data/www/appserver/jrun/lib/servers.
xml'
 at jrunx.xml.XMLMetaData.createDocument(XMLMetaData.java:1028)
 at jrunx.xml.XMLMetaData.importXML(XMLMetaData.java:200)
 at jrunx.xml.XMLMetaData.<init>(XMLMetaData.java:122)
 at jrunx.server.metadata.ServersMetaData.<init>(ServersMetaData.java:32)
 at jrunx.server.ServerManagement.refreshServersMetaData(ServerManagement.java:82)
 at jrunx.server.ServerManagement.getServerRootDirectory(ServerManagement.java:154)
 at jrunx.server.ServerManagement.getServerProperties(ServerManagement.java:191)
 at jrunx.server.ServerManagement.getSystemProperties(ServerManagement.java:204)
 at jrunx.kernel.JRun.setSystemProperties(JRun.java:688)
 at jrunx.kernel.JRun.start(JRun.java:337)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at jrunx.kernel.JRun.invoke(JRun.java:180)
 at jrunx.kernel.JRun.main(JRun.java:168)

How to disable Office 2010 Upgrade Policy prompts for users in a Remote Desktop environment

I have deployed Office 2010 to our Terminal Server.
When users login to their Remote Desktops and start Office apps they are greeted with making choices for Upgrade Policies:
Recommended
Only Updates
Don't Make Any Changes
How can I centrally manage this policy and disable this prompt for users?

Hi,
From the description, what you mentioned is the Opt-in or First things first prompt when you launch Office program for the first time.
If you want to disable the prompt, we can use Office Customization Tool or Group Policy to achieve this goal. For more information, please refer to the following blog:
https://blogs.technet.com/b/odsupport/archive/2012/11/13/how-to-manage-the-opt_2d00_in-or-first-things-first-prompt-when-microsoft-office-2013-applications-are-first-launched.aspx
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

How do I enable Firmware Password from ARD for 10.9.5

I've searched all over the NET and cannot find a solid answer, how do I use the Firmware Password Utility to enable Firmware passwords in ARD on 10.9.5 Networked machines?

See:
*[[/questions/785267]] How do I uninstall inbox.com on a Mac
Try to reset prefs on the about:config page that refer to inbox.
*Open the about:config page via the location bar and do a search for inbox via the Search bar at the top of the about:config page. 
*Reset all inbox related prefs that appear bold (user set) via the right-click context menu to their default values.
Try to reset some preferences to the default with the SearchReset extension:
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

How do I enable an iPod Touch 5 for disk use?

Bit of background as to why I wish to do this: I've made a voice memo and I want to get the WAV file from my iPod Touch 5 to my drive. As this apparently necessitates the use of iTunes (Ver. 12.0.1.26) I knew I was in for an interesting time and so it has proved....
The following steps to try and bring this about are all referenced from here -> Using your iPod as a storage drive - Apple Support.
The fun begins at step 5 when it transpires that to get the voice memo file off an iPod Touch 5 I have to get my Mac Mini to recognise the iPod as a drive.
As opposed to selecting "Enable disk use", which apparently is not an option for my iPod Touch 5, I selected "Manually manage music and videos." Then, according to step 6, "The iPod disk icon appears on the desktop and in Finder windows....". Lo and behold I selected "Manually manage music and videos." .....
....and yet my iPod is still not visible as a device.
Any advice re how I get my Mac Mini to recognise the iPod as a drive or how to get the files off my iPod by alternate means would be appreciated. Just one caveat - I would prefer a solution that doesn't require syncing iTunes up to my Mac Mini at any point.
Cheers.

Try using an app like the free iFunBox. iOS devices like the iPod touch do not support Disk Mode

How to restrict executing tcodes in transaction tab for master clients

This question applies SOLMAN project implementation tools: SOLAR01, SOLAR02 and so on.
Our ERP2005 development U50 system has two clients:
One is master client 101 where all customizing should take place but no transactions are allowed
second client 102 works as sandbox client where new customizing can be test and master data and transaction are allowed.
Only U50/101 is defined in Solution manager SMSY in system role 'development system'. Currently U50/102 is not defined in Solution manager to any system role at all.
As configuration should take place via Solution manager, the consultants use SOLAR01 and SOLAR02 in system role 'development system' meaning that they are connected to U50/101 if want to execute transactions in transaction tabs or IMG nodes in Configuration nodes.
But U50/101 is our MASTER client and no transactions nor most master data are allowed in there. We want to keep it clean. How can I avoid tcodes being executed in system role 'development'. I want to allow consultants use tcodes if they change to system role 'quality system'. But they might forget to change the system role before executing the transaction.
Is there an option in Solution manager Project implementation tools that do not allow tcode launch from transaction tabs when system role is 'development system'.
Of course I can restrict tcode execution with authorizations in satellite systems, but then I would need to disable authorizations for each tcode possibly being used. So I don't like that option.
br: Kimmo

Okay, I'll continue dialog with myself. I found solution how to assign other clients on one system to other system roles, which are so-called 'customer roles'.
See solution manager help:
http://help.sap.com/saphelp_sm40/helpdata/en/3b/8be61c54d22945837fd69861d21a08/content.htm
I did not know until know, that system roles are actually customizable. The roles with letter P,D,C,T,E, etc. are reserved for SAP but you can create your own system roles into table SMSY_ROLES. You would not do it with SM30, but from tcode SMSY and following menu Utilities-System Settings->tab:System Roles. Switch to change mode. Roles with 0-9 are available for "customer roles". Choose role type and write your own description ( like: Sandbox client in development system ).
Now the new role is available in SMSY. But You cannot see it yet in SOLAR_PROJECT_ADMIN/System Landscape tab. In there you must press button 'System role assignment' and in the opening window add your own 0-9 role defined earlier and save. Now you see your new role in 'system landscape' tab and you can assign systems to it like you had done with SAP standard roles.
Now users using implementation tools can change their current system role to your new 'customer role'.
But what it comes to my original problem (see title), that still remains. I have debugged the tcode execution from transaction tabs and don't see any possible way to avoid tcodes being executed for an unwanted system role. An Enhancement Spot ( =new BADI) can of cource be used for making custom rule for my requirement.
I'll make this thread answered. Hope you joined my self-dialog.
Keywords: DEFINE EDIT SYSTEM CUSTOMER ROLES SMSY_ROLES
br: Kimmo

How do I set the about:config settings for all users? iprism keeps prompting from authentication for users.

When users log on and try to open Firefox 23.0.1, users are prompted with Iprism Authentication. We made changes to the firefox about:config values "network.automatic-ntlm-auth.allow.-non-fqdn" and "Network.negotiate-auth.allow-non-fqdn" to true and it works, but only works on a per user basis. How can we set this up for all users?

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

How to make plant in shipping cond tab for line item in sales doc mandatory

Hi
How to make plant as mandatory for a sales document say quotation mandatory ? I went to SPRO-> Basic Fucntion - > log of incomplete terms -> Define incomplete Groups -> B.selected sales -Item -> Created new procedure Z001 with fielda VBAP - WERKS ,selected screen name PDE2 and checked warning check box.
When i goto Assign incompleteness procedures I donot have option to assign it sales document item level procedure i will only get sales doc header procedure to assign it to document type quotation.
How to make plant as mandatory for each line item in quotation?
Thanks,
Vaishnavi

Include: MV45AFZB
Form USEREXIT_CHECK_VBAP
In our business scenario, we have used the same ,But Plant is mandatory only for 1st line item-
source code:
IF vbak-vkorg = '1000' OR vbak-vkorg = '2000'.
    IF sy-tcode = 'VA31' OR
       sy-tcode = 'VA11' OR
       sy-tcode = 'VA21' OR
       sy-tcode = 'VA41' OR
       sy-tcode = 'VA01' .
      IF vbap-werks IS INITIAL AND
         vbap-posnr EQ '000010'.
        MESSAGE e398(00) WITH 'Please enter the plant for first line'.
      ENDIF.
    ENDIF.
ENDIF.
Help:
Through this form exit we are making the "plant' field (for the ist &*
& line item ) mandatory for the sales document . This interns helps us &
& to create the sales document numner according to the plant (Region) &
*& of the Plant
Hope it clears. take assistance of your ABAPer.

How do I enable pop-ups -- generally or for a particular site. (Tablet version 9 or 10)

I have a corporate page that requires pop-ups to load. Actually it requires two pop-ups to load. So stock android 3.2 and Dolphin both choke with a "cannot open second pop-up window" message even after pop-ups are enabled.
I'd like to see if Firefox for tablets will work, but I can't get past even permitting the first pop-up.

When the site tries to launch a pop-up and Firefox's Show/Always/Never page appears in the background, a message appears in the foreground - "The page at ... says: The session manager window failed to open because your Web browser is configured to block pop-ups."
When I click OK in that foreground box, that box and the background Show/etc page disappear. I.e., I never get to say, "trust pop-ups for this site."
Is there any way to do this manually?

How can I enable multitouch support in Firefox for Windows 7?

I'm running Windows 7 Pro on a Fujitsu Q550 tablet. I would like multi-touch support, which supposedly was tried in Firefox 4 beta 3. I can't find an installer for that to try it out myself, and I don't seem to be getting the desired results from either the current Firefox (9) or the current beta for it (2). Does it exist as a feature that just has to be enabled? Is there another way (or another browser) that supports multi-touch on Windows?

See the response to your second post for the same question:
https://discussions.apple.com/thread/3563070?tstart=0

How do I enable TELEPHONY advanced config tab for users ?

Similar Messages

Maybe you are looking for