How do i enable read or delivery receipt for Mail?

how do i enable read or delivery receipt for Mail?

I entered this code into terminal replacing "your name" with my email address:
defaults write com.apple.mail UserHeaders '{"Return-Receipt-To" = "[email protected]"; "Disposition-Notification-To" = "[email protected]"; }'
I've read it worked for some, but I could not get it to work. Does Mail automatically override this?

Similar Messages

Delivery receipt for mail

Is there a way to receive delivery receipts for email sent from iphone IOS8.1
Had a couple of cases when emails haven't arrived for some reason so would be good to get a message to say it's been delivered OK
Cheers

That would depend on using a mail service that offers it, as well as an app that supports it. In many cases, even though your service may support it, the recipient's may not. For what its worth, Microsoft's OWA app doesn't even support it (even though it is a function of Exchange Mail Services).
And frankly, most recipients find it - at best - an annoyance.

Email read and delivery receipt

Hi,
I an sending a mail from SAP to the employees outlook and the sender is the common mail box which is entered on selction screen.
Our requirement is that the common email box should recieve read and delivery receipt for the mail.
Please tell me how to do it.
I am uisng the following code to send the mail.
    DATA : lt_att_content_hex TYPE solix_tab,
           lv_subject         TYPE so_obj_des,
           lv_async           TYPE c,
          " lx_email           TYPE type_email,
           lv_email           TYPE adr6-smtp_addr.
    DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
    CLASS cl_bcs DEFINITION LOAD.
    DATA: lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
Message body and subject
    DATA: lt_message_body TYPE bcsy_text VALUE IS INITIAL,
           lo_document     TYPE REF TO cl_document_bcs VALUE IS INITIAL.
Create recipient
    DATA: lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
    lo_send_request = cl_bcs=>create_persistent( ).
               TRY.
    lo_send_request->asynchronous(
      RECEIVING
        result = lv_async ).
                CATCH cx_send_req_bcs .
               ENDTRY.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        buffer     = pdf_xstring "PDF file from function module
      TABLES
        binary_tab = lt_att_content_hex.
    CONCATENATE ': ' pn-begda+0(4) 'Benefit. Statement' INTO lv_subject
    SEPARATED BY space.
    DATA: lx_string TYPE string.
Message Body
    APPEND ' Body' to lt_message_body.
    lo_document = cl_document_bcs=>create_document(    i_type = 'HTM'
                                                       i_text = lt_message_body
                                                       i_subject = lv_subject ).
    TRY.
        lo_document->add_attachment(
                      EXPORTING
                      i_attachment_type = 'PDF'
                      i_attachment_subject = lv_subject
                      i_att_content_hex = lt_att_content_hex ).
      CATCH cx_document_bcs INTO lx_document_bcs.
    ENDTRY.
Add attachment
Pass the document to send request
    lo_send_request->set_document( lo_document ).
    lo_recipient = cl_cam_address_bcs=>create_internet_address( 'XYZ@XYZ' ).
Set recipient
    lo_send_request->add_recipient(
    EXPORTING
    i_recipient = lo_recipient
    i_express = 'X' ).
    lo_send_request->add_recipient(
    EXPORTING
    i_recipient = lo_recipient
    i_express = 'X' ).
Create sender
    DATA: lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
          l_send TYPE adr6-smtp_addr.
    l_send = p_email.
    lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
Set sender
    lo_send_request->set_sender(
    EXPORTING
    i_sender = lo_sender ).
   TRY.
    lo_send_request->set_status_attributes(
      EXPORTING
         i_requested_status = 'A'
         i_status_mail      = 'A' )
    CATCH cx_send_req_bcs .
   ENDTRY.
Send email
    DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
    lo_send_request->send(
    EXPORTING
    i_with_error_screen = 'X'
    RECEIVING
    result = lv_sent_to_all ).
    COMMIT WORK.
    MESSAGE 'The form has been emailed to the Manager' TYPE 'S'.
    CLEAR lt_message_body

Hi,
For reciepts to work the basis setting needs to be activated.
SCOT->Settings->Confirmation of Receipts

Read and Delivery Receipts

My Blackberry Curve sends read and delivery receipts to the email sender and to my email. Many times I don't even open the message. In my BB email options, I have NO marked on confirm delivery, confirm read and send read receipts. Does anyone know how to make these stop sending?

open messages icon - menu - options - email settings - make sure it shows your email beside MESSAGE SERVICE
change CONFIRM DELIVERY and CONFIRM READ and READ RECEIPTS to NO

Device sends READ and DELIVERY receipts when not programmed to do so.

My Blackberry Curve sends read and delivery receipts to the email sender and to my email. Many times I don't even open the message. In my BB email options, I have NO marked on confirm delivery, confirm read and send read receipts. Does anyone know how to make these stop sending?

sounds this resource is protected by basic authentication??
workaround is to retrieve (for designtime) the wsdl from a browser and save it locally .. and create the plnk on top of it .. during runtime
you need to specify properties on the plnk binding in bpel.xml
httpUsername
httpPassword
all given that your resource is indeed protected by basic authentication ..

Read / delivery receipt for PO forms sent by email

Hi Experts,
I have one requirement to implement the delivery receipt for all the PO forms sent by email.
I have a question that I need your support:
- As we have different companies codes operating and not all would like to receive the delivery receipt, can I restrict the notifications, for example, by company code or by purchasing organization?
Kind regards,
Francisco

Hi,
It has to be with Co. Code but via Plant. You will have to maintain entries of plant (and preferably Co. Code) in a 'Z' table and write an enhancement to check entries in the table before sending. Those available shall be sent.
Hope this helps!
Reetesh

Exchange 2013 delivery reports for mail enabled public folder

How can I get delivery reports for mail enabled public folders? Would I search the related public folder mailbox?

Hi,
When you track messages using Delivery Reports, you can only choose user mailbox when you select mailbox to search. Under the option "Mailbox to search", there is no mail-enabled public folder listed there for you to select from
the address book.
But you can search messages sent to or received from mail-enabled public folder.
Track messages with delivery reports
http://technet.microsoft.com/en-GB/library/jj150554(v=exchg.150).aspx
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

How can I enable the automated drop down for the subject line on the email page

How can I enable the automated drop down for the subject line on the email page as I send more than 300 emails everyday with the same subject line. Before it use to happen in my gmail account but now its not. Please help me as its increasing my work time because I have to type the subject line again and again on each email I send. Please help me guys.

This is usually caused by one or more bookmarks having a long title.
You can check that folder in the Library and shorten long names.
* Bookmarks > Show Al Bookmarks
*Bug 626066 - History, Bookmarks menus too wide because of pages with long titles on 64bits
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

Receipts for mail

How do I get a read or delivered receipt for e-mail?

If you want a Read Receipt (assuming your recipient is using Windows or sending mail through an Exchange server, quit Mail and enter this command in Terminal (with the quotes):
defaults write com.apple.mail UserHeaders '{"Disposition-Notification-To"="[email protected]";}'
substituting "[email protected]" with your real email address. After entering the command, press Enter and then quit Terminal. All emails sent from now on will include a request for a Read Receipt, though you're not guaranteed to get one.
If you want to delete that Read Receipt request in the future, enter this command in Terminal and press Enter:
defaults delete com.apple.mail UserHeaders
Mulder

How do I get read & delivery receipts for messages?

How do I get delivery & read receipts for messages?

You can only get Read receipts if the person you are messaging has enabled Read Receipts in their own settings menu.
Delivery notifications are on by default, and appear below the last message sent.
Note that these only work with iMessage, the blue messages.

How do I put read and receive receipts on e mails?

Anyone know how to put read and receive receipts onto messages sent from Mail?
Ta

Not all e-mail programs support return receipt. This hack lets you get it on Mac OS X Mail:
http://email.about.com/od/macosxmailtips/qt/et_request_recp.htm
Of course the recipient must support the same standard for it to work exactly as intended.

How do i enable reader usage rights to be able to sign a document?

I need to Enable my Reader Usage Rights to sign a document but how do i do it?

You need Acrobat. Reader doesn't have the ability to enable Reader's signing ability in a document.

Mac Mini Sever - Public Share - how enable read and write permissions for new remote files

Hi,
this Sunday a friend ask me to help hum with a problem on is Man Mini Server. He has a small office and uses the mini server to share a public folder to all his employees.
Everyone that creates a file, saves it to the public folder at the mini mac.
That problem is that, who creates the file owns it and remains with read-only permissions to everyone else. The owner has to change the file permission in order to the rest of the employees can work on it.
I do not know mac arquitecture, I only work with windows and linux, but i suspect the principles are the same.
We try to create another folder , and share it, but it happens the same. Have you any ideas on what is wrong?
I suspect it has anything to do with de file Sharing at the mini mac, but it has read and write permissions for everyone.
Thanks for your help.

signed applet. You aren't going to find any easy way to distribute that policy file to users, and that policy file, if you asked me to put it on my PC, I'd tell you to take a flying leap. That would open any applet to access.

Read receipts for mail

Is there any way to get a read receipt with Mail like there was when I had Outlook in a previous life? Cant find how to block a read receipt when requested either. Any help would be appreciated.
Thanks

The Mail application does not include a read receipt request for sent messages nor does it provide a read receipt without your knowledge when requested by the sender of a message when opening a received message.
I consider this an invasion of privacy. A minor one but an invasion of privacy nevertheless.
Via the Terminal, you can have Mail "request" a read receipt for all sent messages but this will work only if the recipient's email client supports this and the recipient enables the option.
http://discussions.apple.com/message.jspa?messageID=2297045#2297045

SAP how to determine the account in Goods receipt for purchase order?

We know when we make a Goods receipt for purchase order,we will use the account in GBB and BSX define in OBYC. But where can we find the rule? I mean why system can find the account in GBB and BSX , not the other TEcode?

HI
This is again based on the movement type which SAP has created a link internally.
So if you see when a document is posted it basically derives the GL accounts based on the Movement type,Valuation class,valaution area and so on.
Good luck
Hari

How do i enable read or delivery receipt for Mail?

Similar Messages

Maybe you are looking for