How do I ensure the words are aligned

Dear All,
I am having trouble actually ensuring the words are all left aligned in my address block.
Any ideas of how I can actually do this?
Here is the screen shot of a sample. I need the "I" and the "1" and the "L" all aligned exactly.
Any ideas?

Look at "Optical Margin Alignment" which works for the entire frame or story. Window -> Type and Tables -> Story
The words really are left-aligned, according to (I think) the side bearing defined in the font. I bet if you zoom out, or look at the printed version, the difference you're seeing zoomed in onscreen and next to guides will be much reduced.
In some cases (poorly designed fonts, families from different foundries used together with very different design assumptions) I've had to use very small thin spaces to make it work visually.

Similar Messages

  • ITunes:  I just redeemed a gift card in iTunes and then rented a movie.  I want it charged to the gift card but think that it was charged to my credit card.  How do I ensure the charges are against the gift card?

    iTunes:  I just redeemed a gift card in iTunes and then rented a movie.  I want it charged to the gift card but think that it was charged to my credit card.  How do I ensure the charges are against the gift card?

    I took this straight from the help menu.
    You need to set up an Apple ID for use with the iTunes Store before you can redeem anything in the iTunes Store. You don’t need to enter credit card information to redeem only the amount of a gift certificate or card.
    Hide 
    Use an iTunes allowance, gift certificate, or iTunes Gift Card
      If you aren’t already signed in to the iTunes Store, choose Store > Sign In, or click Sign In at the top of the iTunes Store window. 
      Below Quick Links, click Redeem, and follow the onscreen instructions.
    The amount in your account appears to the left of your account name. When you click the Buy button to make purchases, the amount changes to show how much money remains in your account.
    You can use a gift certificate only in the iTunes Store for the same country in which the certificate was purchased.

  • How do I fix ? when I log into my yahoo mail the words are so small I cant read it

    Any place else it is fine but about a month ago when I log into my yahoo mail the words are so small I can barley read it. If I go to internet Explorer it is fine but I don't want to use that. It is only in my email.

    Try this :- https://support.mozilla.org/en-US/kb/font-size-and-zoom-increase-size-of-web-pages?esab=a&s=How+to+change+the+size+of+fonts+in+yahoo+mail&r=0&as=s
    This may help you . Let us know if it work !

  • How do I change the size of the words on the banner and tool bars?  The words are so large that I cannot access all the options.

    How do I change the size of the words on the banner and tool bars?  The words are so large that I cannot access all the options.

    Hi ewhuntley,
    It sounds like you may be running Acrobat 11.0.07, is that correct? If so, please choose Edit > Preferences > General. In the entry Scale for Screen Resolution, choose 100%. Save your changes, and restart Acrobat. Did that do the trick?
    Best,
    Sara

  • How do i make the word save as dialog box stop popping up when trying to convert to pdf?

    how do i make the word save as dialog box stop popping up when trying to convert to pdf?

    Hi rus-tee,
    That's interesting--what are you using to convert your file to PDF? Are you using Word? Or are you using the Adobe PDF Pack online service. Please describe your process for converting to PDF, and we'll get to the bottom of this!
    Best,
    Sara

  • How do I add the word "DRAFT" as a watermark on a Pages document?

    How do I add the word "DRAFT" as a watermark on a Pages document?
    I don't want to create an image - I just want to type in the word and have it appear across every page.

    Jean,
    This assumes that you are working in Word Processing Mode.
    o Insert a Text Box on your first page.
    o Type "Draft" in the text box.
    o Select the word "Draft" and on the Format Bar select 144 pt. font size.
    o Enlarge the text box to fit the text and drag it to the center of the page.
    o Select the text again and click on the Color Well on the Format Bar.
    o Drag the Opacity Slider on the color palette to 50% or so, making the text look like a watermark.
    o Then From the Pages Menu, select Format > Advanced > Move Object to Section Master.
    The word DRAFT will now appear on each page of the section. If you have multiple sections, you will have to paste the text box into each Section and move it to the Master layer.
    Hope this does it for you.
    Jerry

  • How do I edit the wording in file or add to wording in file or Doc.

    Hoe di I edit wording in a file or doc.

    Thanks but I can edit in word without Adobe defeats the purpose.
           From: Sara.Forsberg <[email protected]>
    To: Samuel Iglecias <[email protected]>
    Sent: Monday, February 23, 2015 12:43 PM
    Subject:  how do I edit the wording in file or add to wording in file or Doc.
    how do I edit the wording in file or add to wording in file or Doc.
    created by Sara.Forsberg in Adobe Acrobat.com Services - View the full discussionHi samueli11326032, Do you have  PDF file or a Word document (.doc or .docx file) that you're trying to edit? To edit a PDF, you need to use Acrobat. If you have Word doc that you converted from PDF, you can download the file from your account at https://cloud.acrobat.com, so that you can open it and edit it in Microsoft Word. If you've made that far and are having trouble selecting/editing the text in Word, try triple-clicking in the text block that you want to edit. And, if I've completely misunderstood your question, let me know a bit more about the file that you're trying to edit it, and what software you're using, and I'll do what I can to get the issue resolved. Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7222389#7222389 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7222389#7222389 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Acrobat.com Services by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How do i ensure the new access point is joined the controller or not

    How do i ensure the new access point is joined the controller or not

    To Verifying that Access Points Join the Controller or not there are two ways as below.
    Please go through the step by step to find the APs joined state
    When replacing a controller, you need to make sure that access points join the new controller.
    Using the GUI to Verify that Access Points Join the Controller
    Follow these steps to ensure that access points join the new controller.
    Step 1 Follow these steps to configure the new controller as a master controller.
    a. Click Controller > Advanced > Master Controller Mode to open the Master Controller Configuration page.
    b. Check the Master Controller Mode check box.
    c. Click Apply to commit your changes.
    d. Click Save Configuration to save your changes.
    Step 2 (Optional) Flush the ARP and MAC address tables within the network infrastructure. Ask your network administrator for more information about this step.
    Step 3 Restart the access points.
    Step 4 Once all the access points have joined the new controller, configure the controller not to be a master controller by unchecking the Master Controller Mode check box on the Master Controller Configuration page.
    Using the CLI to Verify that Access Points Join the Controller
    Follow these steps to ensure that access points join the new controller.
    Step 1 To configure the new controller as a master controller, enter this command:
    config network master-base enable
    Step 2 (Optional) Flush the ARP and MAC address tables within the network infrastructure. Ask your network administrator for more information about this step.
    Step 3 Restart the access points.

  • How do I ensure all emails are stored on my iMac even if I open and delete on my iPhone?

    How do I ensure all emails are stored on my iMac even if I open and delete on my iPhone?

    Depends on the type of email account, do you know which yours is, POP or IMAP, if you don't know tell me who is your email provider

  • How do you find the word count on MacBook, please?

    How do you find the word count on MacBook, please?

    If you are trying to find word count in a Microsoft Word 2011 documemt, for instance, open the document and go to the Tools menu, selecting Word Count. In Apple's Pages application, open the document and look at the bottom of the page, near the left it will say "X Words" where X is the number.
    Best of luck.

  • How do i find the visible area...

    Hi everyone.
    I'm trying to get the size of the visible area of a JFrame, but it keeps returning 0. I use this.contantpane().getsize() . Its because I need a drawing area which occupies a certain area of the contentpane. How can I find the visible area without the toolbar and border around the frame?
    Here is my code:
    public class CgraphForm extends JFrame implements Runnable {
        private int h = 600; // Height of JFrame
        private int w = 800; // Width of JFrame
        private double pad; // Padding edges size [%]
        private JButton btClose = new JButton();
        private CGUI gui;
        private boolean running = true;
        public CgraphForm(CGUI _gui) {
            // Name of frame send to parent (super) which is the JFrame
            super("Temperature");
            gui = _gui; // Used to enable the applet again
            pad = 0.05 * h;
            System.out.println("GraphForm thread started");
           try {
               jbInit();
           } catch (Exception ex) {
               ex.printStackTrace();
        public void run() {
            // Interrupt makes the thread terminate proberly by ending its run method
            while (running) {
                try {
                    Thread.currentThread().sleep(100);
                } catch (InterruptedException ex) {
                    running = false;
        private void jbInit() throws Exception {
            setDefaultCloseOperation(DISPOSE_ON_CLOSE); // Disposes the JFrame when its closed
            this.setSize(w,h);
            this.setLocationRelativeTo(null); // Location af JFrame on screen
            this.addWindowListener(new CgraphForm_this_windowAdapter(this));
            Container contentPane = this.getContentPane();
            Dimension size = contentPane.getSize();
            System.out.println(size);
            contentPane.setLayout(new XYLayout());
            // PENDING graphSize mangler et offset paa bredden, sandsynligvis kanten af framen
            Dimension graphSize = new Dimension( (int) (w - 2 * pad),
                                                 (int) (h - 0.45 * h));
            JPanel panel = new JPanel;
            contentPane.add(panel, new XYConstraints((int)pad,(int)pad,(int)graphSize.getWidth(),(int)graphSize.getHeight()));
            this.setVisible(true);
            btClose.setText("Close window");
            btClose.addActionListener(new CgraphForm_btClose_actionAdapter(this));
            contentPane.add(btClose, new XYConstraints((int)pad, 500, -1, -1));
    }/lars

    I need the size to draw my panel.
    You shouldn't do. Your panel should be able to draw itself without knowing its size. Assuming your panel is just a plain space which you draw on, that means one of two things: either you make its rendering logic sensitive to its own size (which you can detect in the paint() method) or you can assign it a preferred size and then place it in a JScrollPane to ensure that it can always be viewed. Both of these are fairly straightforward solutions.

  • Since I am writing the book in Italian,how can I replace the word CHAPTER with CAPITOLO ?

    Since I am writing the book in Italian, how can I replace the word CHAPTER with CAPITOLO ?

    I think you need to run iBA in Italian so the templates are in that language.  You can do that by switching your OS X to Italian and then reopening iBA or perhaps by using this app to just change the iBA language:
    http://www.tj-hd.co.uk/en-gb/languageswitcher/
    see also
    https://discussions.apple.com/message/20745332#20745332

  • I have converted a pdf to word. How can I access the Word file from my online account?

    I have converted a pdf to word. How can I access the Word file from my online account? When it says 'download the converted file' I choose a location on my PC and click, but nothing happens. It seems that it can only save the converted file to my online account. I went to my online account but I see no way to look for the file

    Hey Fabrizio,
    You might need to sign up at "https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials to convert your PDF file to Word.
    Do you get the 'download' prompt?
    Also, you can find the converted files by clicking at the 'Files' tab. 
    Please try the same using a different browser and check.
    Hope to hear from you.
    Regards,
    Anubha

  • How can I sort the words in a document into an alphabetical list?

    How can I sort the words in a document into an alphabetical list? Thanks!

    writer888 wrote:
    How can I sort the words in a document into an alphabetical list? Thanks!
    Copy the words to the Mac's clipboard (Edit menu> Copy)
    Paste into TextEdit 
    Next open the Edit > Find > Find window in Text Edit.
    Highlight a space between two words and Edit menu > copy, paste into the Find field
    Next create a return in the middle of your text and copy that and paste into the Replace field
    Click Replace All.
    Now Edit > Select All and Edit > Copy
    Open a Spreadsheet program with Sort ability and paste into the second column cell from the top
    place a "a" into the top column cell, select the entire colum
    Sort desending order
    Now if you need it out of spreadsheet format, then your going to need to copy just the data cells (not the entire column to avoid problems) and Paste "Special" as unformatted text into a word processing program
    If you need to get rid of the Returns, do the opposite you did in Text Edit, replace the Returns with Spaces
    A chore, but it's rare one needs to sort words into alaphabetical order.
    FYI, I used TextEdit and the free LibreOffice (Spreadsheet and Word Processing) for the above effects.

  • How do I set the print area in Numbers?

    How do I set the print area in Numbers?

    Hi Macuser4ever,
    Numbers does not have the 'Set Print Area' feature. Numbers is designed around several tables, each with a purpose. For example, Input Table, Big Database, Intermediate Calculations Table (all of which you may not need to print) and a final Summary (Presentation) Table that you may wish to print. The Summary Table can be on its own Sheet. Arrange objects (Summary Table, Charts [graphs] and whatever) on one Sheet and print only that Sheet.
    If you are using Numbers 3.x (Layout View and Print View missing) try this User Tip:
    Print Layout Guide for Mac Numbers 3.2
    Regards,
    Ian.

Maybe you are looking for