How do I expand my table?

Hello all,
I have a Dreamweaver template I bought from ecommercetemplates that I have radically altered. I can not figure out how to change the editable "body" on my index.php file, however. I have 2 issues:
(1) I changed the dwt file to move my header up but since it looks like the dwt template was built with a table the "editable body" is still too low on the page
(2) On my homepage you will see a brown box that I want to make wider... for some reason it will not expand to fit the page in order to be as wide as the top bar. Aesthetically, this looks wierd. I have tried changing my border widths for both in the html and using the properties manager but no luck getting them to line up.
Please let me know if you have any advice!
Thanks.
http://www.fabricwrapper.com

can I advise to validate the code, it is loaded with errors both xhtml and css, maybe then things will work out or at least some place to start
http://validator.w3.org/ and http://jigsaw.w3.org/css-validator/

Similar Messages

My tables move when i insert a photo how do i expand photos to fit without them moving

my html tables move when i insert a photo how do i expand photos to fit table without the original struture moving?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.font {
     verdana;
</style>
</head>
<body>
<table width="123%" height="641" border="1" cellpadding="1" cellspacing="12" style='table-layout:fixed'>
<tr>
    <td width="75%" height="219" colspan="4"></td>
    <td width="25%" rowspan="2"></td>
</tr>
<tr>
    <td height="152"></td>
    <td>F</td>
    <td></td>
    <td></td>
</tr>
<tr>
    <td height="220" colspan="4"></td>
    <td></td>
</tr>
</table>
</hr>
</body>
</html>

Hi,
you are working with a percentage width of your tables, for example:
table width="123%
td width="75%"
td width="25%"
So it is simply a arithmetic problem to get the proportional wide (means the ratio of % to cm) of your images, so that they do not break the frame. Certainly you could use (translated from German DW) "properties" and change the sizes there:
Hans-G.

How to find from which table we r fetching the data

Hi friends,
i got a requirement to design a query,in my transfer rules i check the info object related to the fiels.but in my crm the field name is different.
how to find from which table the field is fetched........
please tell me........
Regards
sridath

Dear Sridath,
In ST05 switch on the SQL Trace.
Goto RSA3.
Give your DataSource name > Execute
Goto ST05...Switch OFF the Trace
Analyze the Trace file
Gives you details about the fields and Tables from where you are fetching.
OR
Goto LBWE
Find your DataSource > Maintenance > Display mode
In right side window...expand ALL list box...
Exclude MC and take other words...they are the Source Tables.
Regards,
Ramkumar.

Expand, unhide table and set variable at the same time?

Hi all,
How should i go about to create the following?
I want to Expand a table at the same time as i set at variable and unhide another table. I have implemented a single-click solution i the Table API that works fine. I would like to use the Table API for this problem also.
Is this possible? Do I need to make it in multiple steps ie some kind of java-script?
Have tried this but it wont work:
SAP_BW_URL_Get() + ' ' ''&DATA_PROVIDER=DATAPROVIDER_1&' 'CMD=Expand&IOBJNM=0MATERIAL&FILTER_IOBJNM=0CUSTOMER&FILTER_VALUE=' I_CHAVL '&VAR_NAME_1=ZLS_CUST&VAR_VALUE_EXT_1=' I_CHAVL '&CMD_1=ITEM%3DTABLE_2%26HIDDEN%3D' ''''
Any ideas?
Cheers,
Max

Hi Alex,
This is not written in the WAD, but in the Table API. The table API generates the link, creating a JavaScript call. But i hvae also tried to write this url directly in the WAD on an http://.... format but it still does not work.
BR/Max

Can anyone describe how to cut and paste table columns in Data Modeler?

A number of times I have tried using the copy and paste columns functionality in Data Modeler, but in all circumstances when I've copied a set of columns from a table (by highlighting the column set and pressing the copy columns button), opened a new table, and pressed the paste columns at the end button, nothing has happened. is there some unintuitive thing that I need to do?

Ok, thanks.
I see I left "Copy" out of the first reply I sent.
1. Create a table or tables, say tables A and B.
2. Expand the table which has the columns you want to copy, say table A, in the browser
3. Shift (or ctrl) select the columns and select COPY from the context menu.
4. Click in the table you want to copy to, say table B, in the diagram and right-click to use the context menu , select paste
or select the table B in the browser and right-click, select paste.
Are you using the copy in the menu?
There was a bug in our Early Adopter that required you continued to hold the keys, but this has been addressed - you can read this thread to see how things were handled there: Re: Data Model: set of columns

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
Exemple:
Table1
Cliente name:
John
Client number:
12345
Survay number of negative answers:
3
Table2
Questions and answers that were negative:
Question: How much time where you waiting
Avaluation: 3 (from 1 to 10)
Answer: They only called me 1 mouth later
Can you please help me?

Hi,
Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
References:
Subreports (Report Builder and SSRS)
Add a Subreport and Parameters (Report Builder and SSRS)
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

How to declare a internal table in start routine i.e. transformations

Hi Gurus,
How to define an internal table in a start rotuine?
any help greatly appreciated.
Best Regards,
Reddy.

Hi,
types: begin of str,
field1 type c,
field2 type c,
end of str.
data : itab type table of str with header line.
the above code should be inserted where it says insert code below this. this will be like a global decleration. this table will be available for all the routines that you write in the transformation.
All the best !!
Regards
Aparna

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

How can I join 3 tables while extracting data from SAP R/3?

I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.

Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier.

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

When on the internet, how do I expand webpage to fill the whole screen?

When on the internet, how do I expand a webpage to fill the whole screen?

Perhaps Safari isn't quite what you require, too much work involved all the time making it easier to see
Take a look at my customized Firefox:
it always opens to the same size window (or full screen if you like)
it always zooms all web pages 160% (or whateve you like)
it always has large type on the menu bar area. (to whatever you like)
it's very highly customizable, (or use the plain default settings)
has more add-ons than anyone (a real plus when you need it)
has more themes and personas than anyone (make it YOUR browser)
Easier surfing option for hard of seeing users
Safari is about the absolute worst browser since Internet Explorer, it's because Apple has already got your money so there isn't any incentive for them to make a better browser.

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How do I get the table of contents to toggle? I opened it while reading one book I had checked out from my library, but it is still open when I start another book. I am using Adobe 4 and Windows 8.1 on my PC.

How do I get the table of contents to toggle? It has remained open since I opened it while reading two books ago. Thanks for the help.

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

How do I expand my table?

Similar Messages

Maybe you are looking for