How do I fix bug/malware that keeps bumping me from apps I'm using to App Store ads?
How do I fix bug/malware that keeps bumping me from apps I'm using to App Store ads? I have set privacy and Safari security to highest levels, have turned off ad tracking, and have done a hard reboot, but it still keeps happening. The worst offender is the Washington Post app, but it also happens with the Salon app - in other words, apps that regularly update content. Other utility and game apps are unaffected. This happens only very occasionally from Safari.
http://www.apple.com/support/contact/
Similar Messages
-
How can i fix a screen that keeps turning white?
My macbook pro's screen keeps turning white and it would come back on when i move the screen. Then it will happen again. How can I fix this and what is the problem?
Try this a PRAM reset:
Power dowm, power up, hold the these keys, before the start up chime.
Power up hold
Hold till it chimes 2 times.
Reboot.
Hope this helps:) -
I was updating an app on my iPad (seeds pro), and when it was fully updated, I opened it. I tried to use a feature on it, but it said I need push notifications enabled. I was looking around in the notification part of the settings app, and when I go back to the specified app, it still didn't let me use the feature. But the additional thing is that now, when I open a notification for ANY app, or at least open the app, it disappears from the Notification Center. I really need help in fixing this bug or problem or whatever it is.
It didn't work like that before. And I know it wasn't a new feature in the iOS7 update, I've never had my notifications deleted from the Notification Center until a week ago. Before that, I kept my notifications in the Notification Center.
-
When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?
it worked the first few times i did it but the next day after i closed out of itunes once, the device only appears when i plug in my phone.Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings. Be sure to turn it off.
You are confusing an itunes store account with an icloud account. You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/
Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account. (have restrictions turned off) That will disconnect the device from the account but will not delete data in icloud or other devices. Then sign in using the new ID. -
How do I fix a ipad that is "disabled"? When we connect to itunes it requests a password that must be typed into the ipad - which we can't do because it is locked.
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
How can i fix a malware problem?
How can i fix a malware problem?
That depends on what malware problem you are having. Start by going to Thomas Reed's site http://www.thesafemac.com and read up on malware. If you are having adware issues, follow his link to AdwareMedic and use that to clean out adware and block it. Tom is a regular and trusted member of these discussions and a great security guy.
-
I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?
After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?
-
I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?
Check your settings in Options > Applications: https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox#w_check-firefox-settings
Also see:
*https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox
*http://kb.mozillazine.org/File_types_and_download_actions
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox] -
How do I fix my iPhone it keeps freezing on the pass code and the home button reset does not work
error 3194
I can't update my phone and I AM using the latest update of Itunes AND have restarted computer and followed everything. I'm to the point of booking an app't with the genius bar because I'm finding apples instructions and this latest update to be a complete waste of time. -
How do i fix my 3gs that is stuck in recovery mode and will not restore?
how do i fix my 3gs that is stuck in recovery mode and will not restore?
well if it's in recovery mode, all of the data is already gone. this article mey help you get it working again: http://support.apple.com/kb/HT1808
-
How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
My "Notes" app on my iPhone 4S is no longer syncing up with my "Notes" app on my PC or on my iPad. It was syncing up fine before. But no longer. How do I fix this so that whatever I type in iPhone "Notes" will appear in my other devices' "Notes"?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?
How are you trying to transfer it and what are your setting on iTunes. I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue. If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can. Also make sure you are dragging to music on the iPhone.
Hope this helps -
Blocking cookies -
I was told there was a cookie tab under Privacy with a choice for EXCEPTIONS
- but 3.6.12 doesn't have it
- how do I block a cookie that keeps coming back
using 3.6.12To see all the History and Cookie options, select: Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
See:
* [[Blocking cookies]]
* [[Enabling and disabling cookies]]
Maybe you are looking for
-
Will third party software called "Bug me" and "YAPS" work on the Centro?
I am currently a Tungsten E2 user. I am considering buying a Palm Centro and want to know if the third party programs "Bugme" and "YAPS" work on the new Centro that is offered by Verizon? Secondly does the Centro have the ability to "tap" in letters
-
Hi all, we have a lot of SAP Script forms. For multi language usage we use table TTDTG. All SAP Scripts in all languages have the same contents. With the selection of the field lables from table TTDTG the lables will be printed in the language of NAS
-
Syncing iPad calendar events with iMac calendar?
I just entered my schedule for the next two months on my new iPad thinking it would transfer to my 24" iMac calendar, but it did not. In iTunes there is a box to check to completely remove everything from my iPad and replace it with info from my desk
-
Hello I am using SDK1.4.1_02. I thought the jaws.jar was a part of the sdk but when I try to run an app that needs the netscape.javascript package I get the error message that it cannot resolve the symbol. My path setting for Windows XP is: C:\j2sdk1
-
Editing in Photoshop changes the exposure.
When I send photos to photoshop, they come back to Lightroom noticeably lighter even If I don't edit the picture in Photoshop. I'm using Lightroom 4.2, Photoshop CS6, images are RAW, and OS is Windows 8. Any help would be appreciated. Dew