How do I fix out of sync audio and video on my ipad2?

How do I fix out of sync audio and video on my ipad2?  The version is iOS 7.1.2

In what app?
Have you restarted or reset the device?

Similar Messages

  • How can i fix out of sync audio when watching any video online, such as Netflix or YouTube?

    How can i fix out of sync audio when watching any video online, such as Netflix or YouTube?
    This recently started to happen, never used to happen before...strange.
    Help Please!!!

    Cut up the 4n audio clip and synch it to its respective clips.

  • SUBCLIP CREATES OUT OF SYNC AUDIO AND VIDEO

    I have a problem which I hope someone out there can help me solve. I just recently upgraded to FCP 6.0.4.
    In attempting to create a subclip, I follow these steps: set in and out points for the clip on the timeline, select the video and audio, link the clip's video and audio, double click the clip from timeline to bring subclip into browser, make subclip (modify > make subclip).
    After naming the subclip, I double click on it to bring it into the browser for viewing. Here's where the problem comes in.
    The duration of the subclip is always much too long. I noticed that the subclip's in point is always incorrect. It is always the starting timecode of the audio from the timeline (e.g. 00:01:05:00). The ending timecode is always correct though (i.e. the out point).
    The subclip plays the audio at the beginning of the clip, but the video is blacked out until the very end of the subclip, at which time the audio is silent as it has already played out.
    Does anyone know why I'm getting these bizarre subclips and what I need to do to correct this problem?
    Your help is much appreciated.

    In what app?
    Have you restarted or reset the device?

  • Syncing Audio and Video but wish for the Audio not to move on timeline?

    Has anyone worked out how to sync audio and video within Premiere Pro but have the Audio stay fixed on the timeline and the video move? Every way I try it Premiere Pro insists on moving the audio. Locking the track does not work as you cannot select the audio within it to Sync with.
    I have a music video shoot with 14 camera angles used on the lead singer (don't ask me why). Multi-camera editing is not an option as there are too many sources for my brand new MacbookPro to handle. I think I would need the computer from Superman II to edit that many clips together.
    What I am doing is syncing the first clip, the one Im going to use as the baseline fall back shot and then I need to sync other clips onto the timeline. However Premiere Pro insists on moving the audio to fit with the video not visa-versa.
    Any help would be appreciated.

    @slitchfield: on the mentioned page, it is stated that "Improvements in screen real estate, with slimmer top status bar and optional (in some apps) bottom toolbar, meaning that all phones will have a larger useful display area."
    But on the E6 the bottom toolbar decreases available screen size in most apps, most noticeable in Web browser where the full view has gone. The bottom toolbar is not optional, you can't configure it yourself.
    And: "Homescreen widgets will now come in up to five different sizes (1x1, 2x1, 4x1, 2x2, 4x4) and allow a greater degree of interactivity.", but on the E6 they are in only one size, always with large borders and other visual effects.
    So beware of differences between phones, perhaps some aspects of Belle work differently depending on the type of device.
    "Notes now brings up a white (and AMOLED-unfriendly...) editing screen.": that you can change by switching themes, "Dark Solid for Anna" does a good job. It is a shame that the lines of Notes have gone though.
    When switching themes, I found you have to restart the phone, otherwise the theme doesn't get properly loaded in all apps. Stopping/starting apps is not enough. So when experimenting and loading one theme after another, you may end up with disfunctional combinations of black-on-black and white-on-white, but it may not be due to the last theme. Also you may end up with a good combination that isn't around anymore the next time you restart your phone.
    Current N900 and former E6 user regretting Belle upgrade
    Devices owned: 2110, 2110i, Cellular Data Card, 8110, 7110, 6210, 6310i, 6100, 9500, 6233, 5140i, 3109c, N900, E6-00

  • Syncing audio and video with timecode

    What is the best way to sync audio and video files from a one camera shoot on which the camera was jammed with timecode from the mixer? Is there a batch method? Is it best done with a third party application or within Premier?
    Camera is Canon C300
    Adobe Premier Pro CC
    Windows Operating system
    The project is a 15 page short film shot over four days. Lots of dialogue.
    Any help would be greatly appreciated.

    Is "merge assets" different from "merge..."? I see the timecode option in "merge...".
    Thanks

  • Issue - syncing Audio and Video Clips

    Hi Friends -
    Definitely, I am newbie for - editing in this application (Adobe Premier CS6) .
    My idea is to sync audio and video clip - 'based on clip markers' or 'based on Audio wave' .
    But, in my machine, I dont see option to 'add clip markers' (in Marker Menu) for these clips, which are supposed to merge. And, coming 'based on Audio wave' -  I dont even see those options, when I select (both clips to be merged) and choose merge.
    Am I missing any setting - Do I need to have any additional plugins for that? Can anyone pls. help regarding that.
    Thanks in advance.
    Regards,
    Kireeti.

    The audio option wasn't added until Premiere Pro CC.
    You can set clip markers in the Source Monitor with the M key.

  • Out of sync audio and visual when streaming

    over the last week all streaming through netflix, BBC iplayer and YouTube appsthe audio and video out of sync. The visual lag behind gets progressively further behind the longer you watch.   Anyone having this problem and got a fix?  Thanks

    Hey Gem_stone,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with audio and video being out f sync in several apps on your iPad. The article linked below provides a lot of general troubleshooting tips that will resolve most issues like that.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    I hope this helps.
    -Jason

  • Out of Sync Audio and Muted Headphones

    Specs:
    AMD Quad-Core A8-6410 Processor + AMD Radeon(TM) R5 Graphics
    15.6-inch diagonal HD BrightView WLED-backlit Display (1366x768)
    8GB DDR3L System Memory (1 Dimm)
    750GB 5400 rpm Hybrid Hard Drive
    *as stated on the site
    The audio drivers listed in the device manger are:
    AMD High Definition Audio Device
    CyberLink WebCam Virtual Driver
    Realtek Definition Audio
    *all upto date 
    Also has built in beatsaudio
    Issue:
    The audio is fine as long as I don't plug anything into the headphone jack. After I use headphones, regardless of which, the audio begins to go out of sync from the video. The video seems to lag behind the audio by a couple of seconds.  The current fix I do is simply closing the program, be it Chrome or a video player, and restart it. This tends to fix the issue sometimes, until it happens again. The built in speakers have no issue unless the headphones mess up the audio then they begin to show the same effect. Also when the headphones are plugged in and I pause a video and maybe go to another page for a bit and then return to the video, it has become muted and the Volume Mixer will show a Chrome icon producing no noise. When I restart Chrome, either the previous Chrome icon remains present with no noise on the volume mixer or it goes away and a new active Chrome icon has taken its place. Is there some sort of audio issue here that is known with this computer and is there a genuine fix?
    If more info and specifics are required I will gladly produce said info.
    This question was solved.
    View Solution.

    Hi @DannyOhm ,
    You would need to restore you Windows back to factory settings on your Notebook. Here is a document that will help do this.
    If that does not help you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Do you have fix for Photo Booth Audio and Video are not syncing properly, Do you have fix for Photo Booth Audio and Video are not syncing properly

    My audio and video are not syncing properly. There is a lag from the audio to the video.  Does anyone have a permanent fix for Photo Booth where the Audio and Video are not syncing properly?

    If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. You aren't the only one having this problem.
    One person having a Photo Booth problem, although not the same one as you are having solved it by running Disk Utility/Repair Permissions.

  • Re-Syncing Audio and Video

    After capturing in FC Express I find all my audio/video is about 10 frames out of sync. Tape was shot on an old Canon XL and transfered to FCE on a Sony DV deck.
    My settings in Easy Set Up are DV NTSC Firewire Basic. Do you know if changing settings will make any difference on a new capture? 
    I am able to slip the audio 10  frames on each clip in the timeline but doing it every edit is a pain. Is there a way to advance audio or video 10 frames in the Viewer to do the whole hour of capture at one time. Thank you.

    It makes a difference if the audio is offset the same amount all through the video; or if it gradually drifts further out of sync over time.
    If it's a fixed offset I think your best bet is to place the entire captured clip on the timeline, unlink the audio from the video, slip the audio back into sync, then export the entire clip to a self-contained QT Movie; then re-import the exported QT file and use it for editing nstead of your original captured clip.
    If the audio drifts, you probably had a mismatch between your FCE easy setup and the actual audio recording on tape. This usually happens when the tape was recorded with 12-bit audio (aka 32KHz) but your easy setup is 16-bit audio (aka 48KHz).   It also happens sometimes when you record the video on one device but capture with a different device (eg Canon XL2 vs. Sony DV deck).  BTW, the NTSC Firewire Basic easy setup expects 48KHz audio.

  • Error while trying to sync audio and video.

    Suddenly out of the blue I'm have all sorts of problems with Logic 8. I keep getting the "error while trying to synchronize audio and midi" error message. Even when I'm just using using the audio side. Do you know of a local logic tech that could check out my system? Might be a problem with my motu 828mk11 audio interface or corrupt drivers, bad preferences. I'm unable to do any work in Logic until I get this problem solved.

    (Did you do any upgrades with the Firewire plugged in?)
    Usually a MOTU reset will fix this.
    Follow these steps to restore the 828mkII to Factory Default Settings.
    •Disconnect the firewire cable from the 828mkII
    •Press the Setup knob
    •Turn the Setup knob all the way to the right
    •Press the Select knob
    •Press the Value knob
    •Power off the interface and plug the firewire cable back in
    •Power the interface back on
    http://www.motu.com/techsupport/technotes/document.2004-06-16.6405589976/view
    If that doesn't work.
    1) Unplug ALL cables from the 828MkII.
    2) Double check that the power cord is really unplugged.
    3. Switch the voltage switch on the side from your setting (110 in the US) to the other setting and back a few times.
    4) Make sure you've set the voltage switch back to the right setting for your country.
    5) Plug everything back in.
    pancenter-

  • Linking/Syncing Audio and Video

    I think I'm just on the edge of understanding if this can work:
    I have a rough cut of a few clips using on-camera audio. I also recorded with a separate audio recorder. I want to somehow link the secondary audio to the primary audio and the source video clips, so that the secondary audio will be added to the rough cut without me having to go and re-sync each edit with the corresponding secondary audio. Is it possible to sync additional audio to a source file and have it reflected in an edited sequence?

    Lining up each camera clip with the associated audio in its own sequence and then editing using those sequences instead of the original clips is one of the better ways to proceed given your starting point.
    Audio drift shouldn't be apparent over reasonable lengths of clip (say up to 10 or 20 minutes) depending on the stability of the clock in the audio device.  Many of the past reports were due to some manufacturers using slightly off-standard audio rates which Premiere then assumed to be correct and hence generated out-of-sync issues over around 30 minutes or more.  Not your problem here.
    If, when you check the audio sync over a whole clip, you find it is OK at the start but out at the end, then setting a marker on both video and audio near the end and using rate stretch on the audio to change its length by a small amount to line up the markers should give good enough sync for the clip.

  • How do I fix the below sync issue between iPhoto, iTunes, my iPad2/iPhones

    I am having this issue with iPhoto'11. I had the issue at one point in iPhoto '09 but eventually I fixed it but I don't know how. I was told it's a problem with my iPhoto library.
    Here's the problem: When syncing with either my iPad2/iPhone4/iPhone3GS it tells me not all photos were were synced to my devices because there is not enough space, even though there clearly is enough space. I don't think it happens with my AppleTV2 but maybe that's because it's streaming, not syncing, to my ATV2.
    Any thoughts on how to fix? I'm also seeing that only the places and albums icons are included within the photo app on each device. Do I need to somehow repair my iPhoto library?

    Make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
    Fix #1
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
    2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
    3 - reboot, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #1 and #6.
    Click to view full size

  • Re: Out of Sync Audio and Muted Headphones

    when I play a DVD or watch Skygo my earphones do not cut out the volume, and I can not hear anything through the earphones. can you help

    Hey @frankflooring55 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook  and sound not working correctly with headphones. Here is a link to no sound from headphones.
    Have you tried the headphones in a something else, just to check the headphones?
    Some Notebooks have 2 ports for headphones. Please check that for me.
    I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
    Hope this all helps to fix the sound from headphones.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How do I make a dvd in iDVD out of the audio and video files from Compressor 4?

    I created two video files in fcpx and compressed them using the dvd source in compressor 4 which ended me up with a set of a separate video and separate audio file for each video. I want to take these files into iDVD and create one movie file with these two videos. How do I reconnect the separated video and audio files in iDVD? Thanks!

    tell me what software they used to achieve this.
    iDVD.
    Apple sells iDVD on disk as part of iLife 11.
    Yes, there are programs that will put a movie on a DVD.   I have tried most of the other substitutes including Toast, Burn, and others.  None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
    With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    IDVD remains a popular application in the Apple community. For a variety of obvious reasons Apple would prefer your movies to be stored on the cloud. Many people however prefer to have a physical copy, that they can possess, that is easily playable on over 700 million DVD players worldwide.

Maybe you are looking for

  • Package contained old version of indd (CS3) file

    Has anyone had this happen to them. I packaged a job and sent it away - only to hear back from the printer to say the file was an earlier version of that publication. Huh? That job folder containing the linked images had one .indd file which should h

  • Adobe pro 9 creating blanks

    HI, I'm hoping someone can help me out.  I converted an excel document (which chooses the page I am saved on to convert) using Adobe Pro 9.0 and then ran my "Flowfile" which filed it into my efiling cabinet. (I am also running Windows 7 incase that i

  • Updating N80 ie to v5.0719.0.2 firmware

    Hello there, I'm trying to update the firmware on my Nokia N80 Internet Edition. This mostly due to the USSD problem with the current firmware version 4.0707.0.7. The problem is Nokia Phone Updater won't finish downloading the new firmware (68.9 MB)I

  • Page content not viewable in Design View

    I am in the process of creating a site and am using a template for the basis of the pages. All of the pages so far are working fine, however, when I pasted the nested table into this page Sage Concerts, I was able to edit the content in Design view,

  • After upgrading to R12.1.3 i can't open any period in GL

    hi friends i cant open period in GL it complete with error and red color and there are no any output but this is the log any one can help R 12.1.3 OS win 2003 General Ledger: Version : 12.0.0 Copyright (c) 1979, 1999, Oracle Corporation. All rights r