How do I get an array output on a Formula Node?

My problem is simply that I cannot figure out how to get an output on a Formula Node to be an array. Documentation states that "you must declare local arrays and output arrays in the Formula Node" but doesn't say anything more than than. Attempts to put something like "float32 out[100];" for an array output called "out" fail.
If anybody knows how you can do this or even knows if it is possible I would appriciate your help.
Thanks,
Naveen

I found a typo in the formula node I was doing that was making the output not be an array. I don't think I was getting the error before but I was going to put together an example VI to attach here and I found it. So, thanks for your help even tho it was a stupid little mistake on my part.

Similar Messages

How can i get a array from a JSP ?

Hi all,
i have a STORED PROCEDURE like this:
static public void getMyArray(double [] xx) {
for (int i=0; i<myarr.length;i++){
myarr=3.145*i;
xx=myarr;
return ;
how can i get the array with XSQL and transform with a XSL ?
Is this at all possible?
Thanks for any help.
Achim

u r asking how ca u get array from jsp?
and u r asking xsql ...some stuff i couldnot understand .can u repeat the question properly?
null

HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix))

my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix)

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

How could i get my array to do this?

how could i get my array to print out in this format
1 A B C D
2 A B C D
3 A B C D
4 A B C D
5 A B C D
6 A B C D
7 A B C D
i tried this in a small function
public void showArray()
        char[][] temp= new char[7][4];
        for (int i=0; i<array.length;i++)
            for(int j=0;j< array.length; j++)
temp[i][j]=array[i][j];
System.out.println( temp[i][j]);

public static void printArray(char[][] array)
   for (int i=0; i<array.length; i++)
      System.out.print(i +1 + " "); //print the row number + 1, then a space
      for (int j=0; j<array.length; j++)
System.out.print(array[i][j] + " "); //print the value at row i and column j, then a space
System.out.println(); //print a new line
}Edited by: chickenmeister on Nov 11, 2008 9:47 AM

HELP: Run-time array dimension in LabVIEW formula node

I need to dimension an array at run time within a formula node as follows:
int32 i,N;
N = sizeOfDim(inputArray,0);
float64 outputArray[N];
for (i = 0; i outputArray[i] = myfunction(inputArray[i]);
However, LabVIEW complains "Formula Node: index list expected". On the
other hand, if I say
float64 outputArray[1000];
LabVIEW is perfectly happy. But that's not what I need to do! Is there
an alternative
way of accomplishing my goal?
BTW, I've tried calculating N outside the formula node and then
presenting it as
an input with the same results. I've got a bad feeling that run time
array dimensioning
just isn't allowed.
TIA,
Hugh

Can't you just use the Initialize Array function outside the formula node and pass that instead?

How i can get a array in the current page?

Can i send a array parameters from previous page to current page?
the coding like below:
// the coding in the previous page
String[] strSend = {"a", "b", "c"};
HashMap map = new HashMap(2);
map.put("array", strSend);
pageContext.setForwardURL(
"OA.jsp?OAFunc=XXFMSRHISQF",
null,
KEEP_MENU_CONTEXT,
null,
map,
true,
ADD_BREAD_CRUMB_NO,
IGNORE_MESSAGES );
//the coding in the processRequest of the current pageCO.
String strParam = pageContext.getParameter("array");
the problem is that the type of "strParam" is a String.
it's not a array of String. So it is not the parameter what i need.
can u tell me how to get the array parameter from previous page. thanks.

This cannot be achieved directly while using the setForwardURL method, all values that are there in the Hashmap will be appended when the redirection is done, so you cannot get the values that are there in the array object directly.
Workaround that I can think of, put all the array values in a String object, appended by a delimiter, in the second page, after you do a getParameter(String), recover the values using a StringTokenizer and the delimiter that you used while appending the string values and store the values in a Array.
Thanks
Tapash

How to force Get Type Array(..) return a direct pointer to the elements

So, my question is how the native method can ask the VM to pin down the contents of an array.
Performing storage allocation and copying is too long for
Java objects containing many primitive data types...
Thank you !

I must use GetPrimitiveArrayCritical(..) instead of
Get<type>array(..).
Thank you for me!

How do you get JSF to output a blank td

Hi Folks !
I am trying to get a row output from JSF panelgrid like this:
<td class="ruler"></td>
f:verbatim that outputs <td> doesn't have styleClass atribute.
Any help would be appreciated.
thanks,
-Sanjay

Thanks. Is this implementation dependent ? I am using JSF 1.2 RI and when I put <h:panelGroup styleClass="ruler" />
I get:
<td><span class="ruler"></span></td>
I am looking for <td class="ruler"></td>
BTW all this to display a horizontal ruler. From css file:
.ruler { background: #003366; height: 4; }
thanks,

How do I get an array of LinkedLists?

I need an array of liked lists
I tryed the code:
LinkedList buckets[] = new LinkedList[radix];But that generated an unchecked warning when I tried to put an Integer into it.
I changed it to:
LinkedList<Integer> buckets[] = new LinkedList<Integer>[radix];But that generated a "generic array creation" error.
is it possible to to get an array of lists without warnings?

It is possible to use generic arrays (simple ones)
e.g.
import java.util.List;
public class Test
   public static void main(String[] args)
      String[] elements = new String[]{"Happy","Go","Lucky"};
      String middleElement = middleElement(elements);
      System.out.println(middleElement);
   public static <T> T middleElement(T[] elements)
      return elements[elements.length/2];
}However you cannot (should not) create generic arrays with bounded parameters.
Lets say that we have somehow create a generic array:
List<String>[] lists = ...
Then since lists is an array we can assign it to Object[]
Object[] objArray = lists;
and now we can put any list in the array.
objArray[0] = new ArrayList<Rectangle>();
Even though this should not happen, the runtime has no way to check aginst it and so no ArrayStoreException is thrown.
You are however free to:
List<?>[] lists = new List<?>[5];
which implies its an array of any type of List.

How do I determine array size in a formula node

I am feeding an array into a formula node to perform an operation on. However the size of the array can be an arbitrary size. How can I determine its size to use for iterating through a for loop?
I suppose that I could add another input that is fed with the array size from the array palate but I would like to know if it can be done inside the formula node itself.

Your own advice is the only and best one.
greetings from the Netherlands

Changing Output type in Formula Node?

I looked at some other posts on how to set a formula node output as an array, and am unsure why it is not an array. Here is the text in my node: ("out", "in1", and "in2" are all supposed to be 2D arrays; i is an int)
int32 out [50][50];
if (i==0)
out = in1;
else
out = in2;

Hi,
you must use something like
int32 out[50][50];
int32 j, k;
if (i==0)
for (j=0; j<50; j++)
for(k=0; k<50; k++)
out[j][k]=in1[j][k];
else
for (j=0; j<50; j++)
for(k=0; k<50; k++)
out[j][k]=in2[j][k];
I think this is because formula node must be precompiled before execution of your VI. In your case it doesn't know how to address different array elements of "in1" and "in2" because it doesn't know its sizes before you start your VI. In my example I specify the adresses of array elements by using indecies [j][k].
In any case it looks like you can't make direct assignment of arrays like "arr1=arr2". You always must assign its elements in a loop like "arr1[i]=arr2[i]".
Good luck.
Oleg Chutko.

Array index problem in formula node

dear friend
I'm trying to use formula node to solve a problem because I make this program using c at the begining.
It runs perfectly in turbo c, but somehow it doesn't work in the formula node.
I try to debug my source code, and I find that the formula node seems can't read the true value in
the array.
Here is the code in the formula node.
int32 i,j,k;
for ( i = 0 ; i < sopa; i++ )
j = 1;
ep[i][0] = pa[i];
ep[i][1] = np[ep[i][0]][0];
while ( ep[i][j-1] != exit )
  for ( k = 0 ; k < sonp ; k++ )
    if ( np[ep[i][j-1]][k] != -1 && (pc[ep[i][j-1]][ep[i][j]] + pc[ep[i][j]][exit] >= pc[ep[i][j-1]][np[ep[i][j-1]][k]] + pc[np[ep[i][j-1]][k]][exit] ) && (pc[ep[i][j-1]][np[ep[i][j-1]][k]] == org[ep[i][j-1]][np[ep[i][j-1]][k]] ))
      ep[i][j] = np[ep[i][j-1]][k];
  j++;
This is the part that I think the problem might be.
if ( np[ep[i][j-1]][k] != -1 && (pc[ep[i][j-1]][ep[i][j]] + pc[ep[i][j]][exit] >= pc[ep[i][j-1]][np[ep[i][j-1]][k]] + pc[np[ep[i][j-1]][k]][exit] ) && (pc[ep[i][j-1]][np[ep[i][j-1]][k]] == org[ep[i][j-1]][np[ep[i][j-1]][k]] ))
ep[i][j] = np[ep[i][j-1]][k];
I state that "np[ep[i][j-1]][k] != -1" but I do get the value -1 in the array "ep".
Could someone tell me why I get -1 in the array?
I hope I can finally do it all by labview not using formula node,but array like "pc[ep[i][j-1]][np[ep[i][j-1]][k]] "
seems very hard to wire in labview. Could someone give me some good advices of doing this?
Thanks for your help

altenbach 已寫:
normanshi wrote:
ep[i][0] = pa[i];                                          (A)
ep[i][1] = np[ep[i][0]][0];                            (B)
...    if ( np[ep[i][j-1]][k] != -1 && ... )          (C)
      ep[i][j] = np[ep[i][j-1]][k];                       (D)
I state that "np[ep[i][j-1]][k] != -1" but I do get the value -1 in the array "ep".
Could someone tell me why I get -1 in the array?
I hope I can finally do it all by labview not using formula node,but array like "pc[ep[i][j-1]][np[ep[i][j-1]][k]] "
seems very hard to wire in labview. Could someone give me some good advices of doing this?
There are many possible scenarios to get a -1 in the ep output. For example if the -1 gets already written in step (A) or (B) at a certain index, and that index does not get overwritten in step (D). You are indexing all over the place! Is there some bounds checking on the array contents? What are typical inputs and array sizes?
I'm sure about that the -1 doesn't get already written in step (A) or (B) because ep[i][0] and ep[i][1] is fine. What really makes me confuse is that sometimes ep array has the value like this.
That means it does overwritten some value in step (D). The -1 should never be written into it because I have already state that np[ep[i][j-1]][k] != -1. Somehow I still get -1,and this is really strange! I'm indexing all over the place becuase I can't figure out a better way to achieve my requirement.
I think I should briefly tell you what I'm trying to do. In this program,I input some values which means the distance from one point to another. Then I use floyd's all pairs shortest-path algorithm to find all the shortest distance. Finally I want to find out the "shortest path". I mean like from point 4 to point 0,the shortest path might be like 4 -> 2 -> 1 -> 0, and what the formula node part do is trying to find out this "shortest path". Maybe you can give me some better advice of doing this, I have been thinking a better way to do it for about two months. I think I'm really not good at this.
I try to do it all by labview ,but again I get a strange problem. This time the ep[i][j-1] doesn't get the correct value. In the first time i=0 j-1=0 ep[i][j-1] = 1,but the second time i = 0 j-1 = 1 ep[i][j-1] = 0. This makes the "ep[i][j-1]!=exit" get the incorrect boolean value. The ep[i][j-1] should be 2,not 0. I try to use highlight to find if I make any mistake, but I can't one.This is the input and I put the labview program in attached file (temp4.vi).
Could you help me find out why this happened?
Thanks for your help altenbach!
由 normanshi 在 08-19-2006 10:06 PM 上編輯的訊息
Attachments:
temp4.vi ‏191 KB
ep.jpg ‏10 KB
input.jpg ‏9 KB

How can I specify simple math like in a Formula Node but on the front panel?

If the Formula node had a "text" property, that would work for me, because I could limit my inputs and outputs to N floating-point numbers.
LabVIEW once had such a thing but it was in an add-on math library, and I don't remember what it was called.
Solved!
Go to Solution.

Thanks; that led me directly to what I was looking for. A combination of "Parse Formula String.vi" and "Eval Parsed Formula String.vi" works perfectly for me!

How a can restar all my variables of some "Formula nodes"?

I have one formula node with several outputs,
I want restar one of her value to 0 when one sentence is false o is true.

I am not quite sure what you are wanting to know. I suspect that you want to be able to write if-then statements (conditional ) in the formula node. The best place for this kind of information is to right click on the boarder of the formual node >> help.
I dug around for a few seconds and found the following cryptic information:
The numeric value of TRUE is 1, and FALSE is 0 for output. The logical value of 0 is FALSE, and any non-zero number is TRUE. The logical value of the conditional expression
is if the logical value of is TRUE and otherwise.
I think this means if is true then do otherwise do
There is an example that might be more helpful. Open LabVIEW >>
help >> find examples >> click on search tab >> look for formula >> open calculate volume.vi .

How do I get rid of output.systems pop up and halt Safari?

When I open Safari it goes to output.systems and a pop up window appears with what I consider an ad to call 1--866-560-5093 to get assistance. I can't browse with Safari. How do I fix the problem. I refuse to call a ph. number to get rid of the pop up with the ph. number in it.   I can't access Safari Preferences to turn off extensions.   I'm using iMac 3.06 GHz, 12 GB, 999 GB HD, OS X Yosemite 10.10.2.    I'm assuming I need to take all Safari software off and reinstall. Please advise what you suggest to do.

This is a scam, please don't call the number.
1. Force Quit .
    Press command + option + esc keys together at the same time. Wait.
    When Force Quit window appears, select Safari if not already.
    Press Force Quit button at the bottom of the window.   Wait.
    Safari will quit.
2. Relaunch Safari holding the shift key down.
3. Turn off wifi and turn it back on.
    Turn off Wifi. Click Wifi icon in the menu bar and select “Turn Wifi off”.
    Visit another website.
    You won’t have internet connection.
    Turn on Wifi. Click Wifi icon in the menu bar and select “Turn Wifi on”.
    Select your Network.
4. Safari > Preferences > Security > Privacy
    Cookies and website data:
    Click “Details” button.
    Remove the cookie related to this, if there is one.

How do I get an array output on a Formula Node?

Similar Messages

Maybe you are looking for