How do I get my iPhone 5c out of black screen recovery mode?

I have been trying for countless hours and days to get my iPhone 5c out of recovery mode (black screen no apple logo or anything else) the only reason I know it turns on is because the backlight LCD changes color. When I press down on it it leaves a little finger pressure thing. I have tried all of the ways to get it out of DFU mode, Out of Recovery Mode, I have tried restoring it, in which case i get the error 4005,40013 etc. So now I have come here for my last hoorah on trying to get this pile out of recovery mode and the IOS installed and working.
I don't know if this matters or not but, I have recently purchased a screen from ebay, it was an original iPhone screen etc. I have replaced it and as i said the screen works fine. that shouldn't have any problem with the actual software malfunctioning to update, but here is the log! Enjoy!
All help is greatly appreciated and I will do my best to give credit where it is deserved in the future! God Bless!
2014-07-08 23:05:05.000 iTunes[796:707]: restore library built Jan 31 2014 at 16:40:15
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: iTunes 11.2.2
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: Software payload version: 11D257 (option key)
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: Using MobileRestore state machine
[23:05:52.8450] Successfully applied power assertion
[23:05:52.8454] Changing state from 'Idle' to 'Restoring'
[23:05:52.8692] amai: AMAuthInstallSsoInitialize: can't find SSOClient.framework
[23:05:52.8695] requested restore behavior: Erase
[23:05:52.8698] requested variant: Erase
[23:05:52.8822] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.4330] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[23:05:53.4334] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 0x6000002b7ac0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4339] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 0x6000002b7460 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4344] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0x6000000bf680 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4349] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0x6000002a13e0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4354] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0x6080000b40a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4359] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0x6000002a88e0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4364] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0x6000002af720 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4369] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0x6000002b6380 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4374] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0x6000000bcaa0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4379] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0x6000002b1760 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4384] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 0x6000002ac240 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4388] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0x6000002b0bc0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4392] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 0x6000002b5cc0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4396] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0x6000002b0740 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4400] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0x6000002aa980 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4405] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 0x6000002b1340 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4408] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0x6000002b13a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4412] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0x6100000b5600 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4416] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0x6000008531a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[23:05:53.4419] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[23:05:53.4422] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/tmp/PersonalizedBundle_E7EE0982-00C0-4513-B599-39C008B08D9C/am ai/debug/tss-request.plist
[23:05:53.4425] amai: AMAuthInstallHttpMessageSendSync: httpRequest=<CFHTTPMessageRef 0x61000016fc00(0x61000016fc10)> { POST request, priority -1, url http://gs.apple.com:80/TSS/controller?action=2 }
[23:05:53.9574] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[23:05:53.9640] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/tmp/PersonalizedBundle_E7EE0982-00C0-4513-B599-39C008B08D9C/am ai/debug/tss-response.plist
[23:05:53.9676] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[23:05:53.9709] iBoot build-version = iBoot-1940.10.58
[23:05:53.9716] iBoot build-style = RELEASE
[23:05:53.9720] requested restore behavior: Erase
[23:05:53.9731] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9735] requested restore behavior: Erase
[23:05:53.9747] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9751] unable to open device_map.txt: No such file or directory
[23:05:53.9937] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:53.9941] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:53.9945] DeviceRequest failed: 0xe000404f
[23:05:53.9949] command device request for 'getenv radio-error' failed: 2008
[23:05:53.9952] radio-error not set
[23:05:53.9955] unable to open device_map.txt: No such file or directory
[23:05:53.9958] <Recovery Mode Device 0x60800014bf20>: production fused device
[23:05:53.9961] requested restore behavior: Erase
[23:05:53.9965] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9968] requested restore behavior: Erase
[23:05:53.9977] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:54.0270] <Recovery Mode Device 0x60800014bf20>: operation 4 progress -1
[23:05:54.0553] bootstrapping restore with iBEC
[23:05:54.0557] requested restore behavior: Erase
[23:05:54.0568] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:54.0673] <Recovery Mode Device 0x60800014bf20>: operation 31 progress -1
[23:05:55.0687] <Recovery Mode Device 0x60800014bf20>: Recovery mode succeeded
[23:05:55.0692] Finished Recovery Restore Phase: Successful
[23:05:55.1899] Recovery mode device disconnected
[23:05:55.1903] Device removed when in state Restoring, moving device to transition state
[23:05:55.1906] Changing state from 'Restoring' to 'Transitioning'
[23:05:55.1909] Creating timer to monitor transition
[23:05:57.3207] Recovery mode device connected
[23:05:57.3210] Transitioning device returned, continuing restore.
[23:05:57.3213] Canceling timer
[23:05:57.3217] Changing state from 'Transitioning' to 'Restoring'
[23:05:57.3220] requested restore behavior: Erase
[23:05:57.3223] requested variant: Erase
[23:05:57.3227] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.6937] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[23:05:57.6941] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[23:05:57.6945] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[23:05:57.6950] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[23:05:57.6953] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[23:05:57.6957] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[23:05:57.6961] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[23:05:57.6964] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[23:05:57.6968] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[23:05:57.6971] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[23:05:57.6975] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[23:05:57.6978] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[23:05:57.6981] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[23:05:57.6984] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[23:05:57.6987] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[23:05:57.6991] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[23:05:57.6994] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[23:05:57.6997] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[23:05:57.7000] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[23:05:57.7004] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[23:05:57.7007] iBoot build-version = iBoot-1940.10.58
[23:05:57.7011] iBoot build-style = RELEASE
[23:05:57.7015] requested restore behavior: Erase
[23:05:57.7018] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7022] requested restore behavior: Erase
[23:05:57.7025] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7029] unable to open device_map.txt: No such file or directory
[23:05:57.7033] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:57.7036] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:57.7040] DeviceRequest failed: 0xe000404f
[23:05:57.7043] command device request for 'getenv radio-error' failed: 2008
[23:05:57.7047] radio-error not set
[23:05:57.7050] unable to open device_map.txt: No such file or directory
[23:05:57.7054] <Recovery Mode Device 0x60800014d1b0>: production fused device
[23:05:57.7057] requested restore behavior: Erase
[23:05:57.7061] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7065] requested restore behavior: Erase
[23:05:57.7068] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7325] <Recovery Mode Device 0x60800014d1b0>: operation 4 progress -1
[23:05:57.7714] unable to open device_map.txt: No such file or directory
[23:05:57.7719] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:57.7722] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:57.7726] requested restore behavior: Erase
[23:05:57.7733] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7738] requested restore behavior: Erase
[23:05:57.7750] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7754] <Recovery Mode Device 0x60800014d1b0>: operation 42 progress -1
[23:05:57.7758] requested restore behavior: Erase
[23:05:57.7767] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:58.8029] <Recovery Mode Device 0x60800014d1b0>: operation 5 progress -1
[23:05:59.1074] unable to open device_map.txt: No such file or directory
[23:05:59.1078] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:59.1082] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:59.1086] DeviceRequest failed: 0xe000404f
[23:05:59.1089] command device request for 'getenv ramdisk-delay' failed: 2008
[23:06:00.7244] <Recovery Mode Device 0x60800014d1b0>: operation 6 progress -1
[23:06:01.7350] <Recovery Mode Device 0x60800014d1b0>: operation 7 progress -1
[23:06:02.0286] <Recovery Mode Device 0x60800014d1b0>: operation 8 progress -1
[23:06:02.0290] unable to open device_map.txt: No such file or directory
[23:06:02.0294] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:06:02.0298] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:06:02.0301] <Recovery Mode Device 0x60800014d1b0>: operation 9 progress -1
[23:06:02.0305] <Recovery Mode Device 0x60800014d1b0>: Recovery mode succeeded
[23:06:02.0308] Finished Recovery Restore Phase: Successful
[23:06:03.2217] Recovery mode device disconnected
[23:06:03.2220] Device removed when in state Restoring, moving device to transition state
[23:06:03.2223] Changing state from 'Restoring' to 'Transitioning'
[23:06:03.2226] Creating timer to monitor transition
[23:06:29.9952] Restore completed, status:4013
[23:06:29.9952] Failure Description:
[23:06:29.9952] Depth:0 Error:Unexpected device state 'Recovery' expected 'RestoreOS'

I ran into the problem you have after trying to update to 7.1.2 the phone updated, but got stuck in recovery mode, and none of the reset methods worked. I did some searching and came up with a simple method, and it got me out of the loop.
Once i used this app, My phone booted and The update was in place.
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/

Similar Messages

  • How do I get my iPhone 5C off of black screen ?

    My phone is brand new and all of a sudden the screen goes black. I tried holding the sleep and home button but it didnt work.

    If a hard reset doesn't work try
    You need to put the device into restore mode and restore it
      http://support.apple.com/kb/HT1808
    Then Restore the device.
      http://support.apple.com/kb/HT1212

  • How do I get my iPhone 4S out of Recovery Mode w/o restoring? (got stuck when upgrading to ios 7)

    Last night I upgraded my iPhone 4S to ios 7, and this morning when I went to use it I was stuck in Recovery Mode - How do I get my iPhone 4S out of it w/o restoring? I have photos, contacts, etc  Iwant to get off the phone. I tried Tiny Umbrella and RecBoot but no dice. I was not able to get any help from the Apple tech on the phone. They only suggestions offered were to check to see if iPhoto or the Finder would show my device so I could copy over my photos.
    Thanks, Chad

    See: Resolve iOS update and restore errors - Apple Support
    That error usually means that your computer antivirus is blocking the update.
    It can also mean that your phone was jailbroken, or your computer was used to jailbreak some iOS device in the past.

  • How can i get a iphone 3G out of recovery mode without restoring it

    Need Help, How can I get a iPhone 3G out of recovery mode without restoring it. it has never been backed up so restoring it will loose all contacts etc.

    You can't get it out of recovery mode without restoring it. 
    If it's in recovery mode, your data's almost certainly gone anyway.

  • TS1814 I tried updating my iphone 4 using itunes but i keep getting a message saying iphone software server could not be contacted. What does this mean and how do I fix my iphone which appears to be in recovery mode.

    I tried updating my iphone 4 using itunes but i keep getting a message saying iphone software server could not be contacted. What does this mean and how do I fix my iphone which appears to be in recovery mode.

    USER-kswest wrote:
    BTW I have gone to the "Contact iTunes Support" and do NOT get anywhere. That is why I am here!
    You need to contact iTunes support and send an email by following the link I posted.
    Simply going there does nothing.

  • How can I backup my iPhone if it is in the recovery mode? I do not have a backup on iCloud or iTunes

    How can I backup my iPhone if it is in the recovery mode? I do not have a backup on iCloud or iTunes

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...

  • TS2529 how can i get my iphone 3gs out of recovery mode

    I tried to sync & update my iphone 3gs with itunes and after the update itunes gave message 'iphone in recovery mode, click here to restore'.  I dont want to restore back to new condition.  My phone is useless, please tell me how to get it out of recovery mode without having to restore.  Thanks for any help!

    You CANNOT get your phone out of recovery mode without restoring.  Either restore your phone, or sit there with a broken, useless phone. 
    Your choice.

  • How do i get my iphone 5 out of recovery mode after trying to install ios 7

    Alright, so i tried to install ios 7 and i got an error saying that the ios 7 update got a problem and so then my phone went into recovery mode. i installed tiny umbrella to get it out of recovery and it worked, so then i tried to install ios 7 again and it got another error this time my phone had already been switched to the ios 7 format but was not completely done, so my phone went into recovery mode again. so i tried tiny umbrella again and it just kept going back to recovery mode. i tried to restore my phone after trying to look for another way to get my phone out of recovery mode and i got nothing so i decided to restore my phone and i then get another freaking error saying that itunes could not restore due to a problem, then i just decided to try tiny umbrella one last time and it didnt work. so i tried to restore again but now my phone is not being detected on itunes so i cant do anything, and my phone is stuck in recovery mode... all i was trying to do is get the new update and now my phone is dead, it wont do anything please help!!

    Use tinyumbrella. Connect your iphone, click on the random string of numbers that appears in the recover devices window, and click "exit recovery". That solved my problem, and it may solve yours. Give it a shot.

  • How do I get my iphone 4 out of recovery mode

    I am having trouble getting my iphone out of recovery mode. While getting my upgrade my phone became detached from the computer in the middle of the download and went into recovery mode.  I have tried to restore the phone however while itunes is extracting data my phone will reset itself after so long before itunes can finish extracting data and when it does my itunes will not pick it.  Any suggestions??

    You can try this it has always worked for me:
    Try holding both the home button and power button until it shuts off and you see the apple logo come up.
    After that does take your finger off the power button WHILE STILL HOLDING the home button.
    This should send your phone into DFU mode where you can use the recovery option to kick it out of that mode.

  • How do you get your iPhone 5 out of recovery mode without restoring it?

    I plugged in my phone and tried to update it to iOS 7.1.1 but something happened and it told me to plug my phone into itunes and restore it.
    I have an iPhone 5, it's not jail broken.
    I haven't gotten the chance to backup on phone on my new laptop yet so I have no way of getting all my photos and contacts back.
    Please help!

    There is no way to recover your content if you have no backups and once it is in recovery mode it is too late to back it up. Are you sure you didn't set it to back up automatically to iCloud as prompted when you first set it up? How about the backup from your previous computer?

  • How can I get this iPhone 5 out of Recovery Mode?

    I'm sure there are many questions asking the same thing, but my situation seems a little different than what I've read so far.
    I was attempting to restore a new iPhone 5 from a previous backup from an iPhone 3. After waiting for the 5 to download the new update (6.0.2), it started the restoration process, but stopped right before it was finished and gave me an "unknown error 6". I can't seem to make sense of what error 6 is, no matter what I read in forums.
    Since then, the phone has been in Recovery Mode. I cannot get to the home screen, it WILL NOT restore completely, and every time I try I get the error 6 message. This phone is useless right now, and I am unable to restore it.
    I've tried TinyUmbrella, restoring in DFU, and nothing seems to work.
    Does anyone have a clue as to where I can go from here? Any ideas are much appreciated.
    -Brad

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • How do I get my Iphone 4 out of recovery mode after an update without restoring it?

    I need help trying to get back my iphone to normal. I can't restore it because I didn't back up the video I made 2 days ago and I need it for school. How can I keep everything without restoring it to factory settings or back to what it was when I last backed it up?

    If the device is in Recovery Mode, its contents are toast Now, the best you can do to recover a working usable phone is to plug it via USB to the computer running the latest version of iTunes (11.1.2) where you presumably have the last backup you made of it. And Restore from that.

  • HT201210 how can i get my iphone 4 out of recovery mode without losing text messages and pictures and contacts

    my phone is stuck on the screen with the charger pointing up to itunes. Itunes says it can't find it in recovery mode. How do i get my phone out of this setting without losing everything that has been on my phone

    nina38 wrote:
    How do i get my phone out of this setting without losing everything that has been on my phone
    You don't.  so hopefully you've been keeping regular backups.

  • How do I get my iphone 4s out of recovery mode if it wont restore?

    My iphone won't let me get out of recovery mode & tells me to plug into itunes & restore it, but everytime I do that, it tells me my Iphone cannot be found.

    If never jailbroken, see this:
    iOS: Unable to update or restore

  • HT4528 How do I get iPhone 4S out of portrait screen lock mode?

    Phone is locked in portrait display mode.  How do I get it out of that mode?

    http://support.apple.com/kb/ts3694#error21
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Maybe you are looking for

  • Java Bea CallableStatement

    What i use: Oracle 8.1.7.0.0 jsp i have a Stored procedure that has an IN OUT number in the jsp i do the following ... //declare variables yada yada cs = conn.prepareCall("{call MARKET_COPY(?)}"); cs.setInt(1, 12); cs.registerOutParameter(1, java.sql

  • Storing multiple passwords for one web site

    I go to one web site that I have over 30 different user accounts that I access. Is there a way to have Firefox remember all of the user account login and passwords?

  • Does anyone know where i could download OS x Lion 10.7... I can't find it anywhere!

    I just got an old/refurbished macbook and it has 10.6.8 on it, but I wanted to upgrade to 10.7, but can't find any site or anything where I can do that. Anyone have any ideas? Also, w/ my Mac, it won't just double click to open up folders, or hardriv

  • Please help with this weird error!

    I am using the normal template with based on Existing Tables. When I try to edit the rows with the edit icon not all fields in the table are filled. If I had Version number 1.1.1, it is shown as blank in the edit screen but the number still displays

  • Recorded slides. Can they be edited?

    Howdy I know recorded slides with full motion capture can be edited. I recorded with AUTOMATIC recording which seems to capture the background and mouse clicks and typing can be edited. occasionally, the mouse clicks are out of sync with the rest of