How do I get "verification code" to allow sharing photos via email and photomail with PSE11

I have just install, yesterday, Photoshop Elements 11. Cannot get it to allow me to share photos via email or photomail. Message appears stating that a verification code is required, with a note that an email has been sent to our email address, which is listed on the line above...but no message ever comes. There is also a button to click that says "resend email" and using that does nothing. What do I do next?

I have same problem. I just purchased a new computer and re-installed PSE11, and this verification process appeared. I have received no email.

Similar Messages

My computer keeps defaulting from a GB format to US format keyboard with a US flag in the top bar. How do I get it to go back to a GB flag and stay with a GB flag?

My computer keeps defaulting from a GB format to US format keyboard with a US flag in the top bar. How do I get it to go back to a GB flag and stay with a GB flag?
This only started 2 days ago.
I have seen much on line as this seems to be a common problem, however none of the suggestions posted seem to work.

Thanks Drew,
On clicking the US flag I had previously then unchecked the US box. It has rechecked itself, and I have unchecked it again. The GB English remains checked.
The flag icon has now gone completely from the top bar (just replaced with character and keyboard viewer) -but that's fine. That's different to previous attempts to fix the issue.
Hopefully now I will remain able to type a £ sign on the keyboard rather than get the criss-cross symbol. It may well default back in about an hour (which is what has been happening since this started 2 days ago). If it does I'll come back on here. Many thanks in the mean time for your help.

I am trying to send a photo via email and the email address from me is way wrong how do you change that

I am trying to email a photo of Iphoto and the from email address is wrong. How do I change this. I am new with Apple Products

iPhoto preferences ==> Accounts and correct (or delete and re-enter) the account information
LN

How can I get my imac to open since updating latest itunes and syncing with ipad?

I have just updated itunes to the latest version and the imac was syncing to the ipad, when it froze. The hard drive is pretty full, but I can't get into it to delete stuff. I have tried opening it by holding the shift key till the wheel stops spinning, to no avail.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How do I get my iPhone to display my newly changed email and password? It's only showing my old email and I cannot log in!

I've tried to reset my iPhone, shut it down, and connect it to my computer. Nothing has worked.

Hello peanutbummer,
Thanks for using Apple Support Communities.
If you have changed your username, you will need to first remove your previous email account, then add in the new account details.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Take care,
Alex H.

I scratched the label off on a £25 gift card and it removed the code. How can I get the code for the card?

I scratched the label off on a £25 gift card and it removed the code. How can I get the code for the card?

Click here and request assistance. Gift cards are usually if not always final sale because it would be easy enough for someone dishonest to abuse returns or replacements of them.
(58640)

Working on Lion, trying to share photos via email, error message: "The email server didn't recognize your username/password combination". Regular email works fine, don't know how to fix this.

Having trouble with sharing photos via email on my desktop Imac. Error Message when I try to send: "The email server didn't recognize your username/password combination. Normal email inbox/outbox works fine, error message only comes up when using "Sharing photos".
Not sure how to fix this, please help.

Are you trying to email directly from iPhoto? If so, check iPhoto>Preferences>Accounts tab and make sure your details are entered correctly there.

How do i redeem a 10.00 gift... when i click redeem i am prompted to download itunes... i already have itunes...how do i get the code... or get past the download

omg how many times do i have to ask the question...., i am trying to redeem a gift of 10.00.. when i click on redeem it wants me to download itunes... i already have itunes.... how do i get the code.... when it gets this complicated to ask a question it doesnt seem worth it...wass up????

Redeeming iTunes Gift Cards and content codes
iTunes 11 for Mac- Redeem an iTunes allowance, gift certificate, or Gift Card
iTunes 11 for Windows- Redeem an iTunes allowance, gift certificate, or Gift Card
If you can't redeem your iTunes Gift Card or code

Based on personel number, how do I get country code for that person?

Based on personel number, how do I get country code for that person? Is there any function module to allow me to do that? Thanks!

Hi,
Check function module HR_PERNR_COUNTRY_GET.
Donnie

I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with adminis

I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?

If your intention is to use the trial again it will not reset if you reinstall. It will remain in its ran out state.

How do I get my computer to "allow" a Java upload? It will not even accept the link from your support page.

How do I get my computer to "allow" a Java upload? It will not even accept the link from your support page.

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

How do I get my mac to allow a PDF file to print on my HP?

When I tried to print a PDF file my Mac told me I had to go to the App store to get the file to print, this has not happened before and most of my documents have printed with no problem. How do I get my Mac to allow me to print a PDF file?

Open Finder Preferences and choose to show external drives on the desktop:
And/or in the sidebar:

How do I get my code changes to show when published in Business Catalyst?

I have created my website using !Adobe Muse and have used the Ecwid ecomm widget to integrate a shop. As I wasn't happy with the font, colour, etc, I changed the code using the edit 'html' function, accessing the code information from a design browser mode and then further on in the process, I published it to Business Catalyst. However, now the changes don't show. How do I get my code changes to show when published in Business Catalyst? Do I need to go through the same process using Business Catalyst?

Hi,
Thank you for choosing Ecwid! To change the design of your storefront, you should go to Ecwid Control Panel > Settings > Design > CSS Themes. Find your current active theme and add all the necessary changes in a big input field that you’ll see there. To know more about how to improve your storefront design, please refer to this article http://help.ecwid.com/customer/portal/articles/1083332-how-to-change-ecwid-design
If you make changes to your CSS Theme but your storefront design remains the same, please refer to this article http://help.ecwid.com/customer/portal/articles/1149625-i-don-t-see-the-changes-i-made-to-m y-css-theme
Also, you can find a good range of articles and tips on how to improve your Ecwid store in our Help Center http://help.ecwid.com/ Feel free to use it!
If you get any other questions about CSS or Ecwid functionality, contact us on our forum http://www.ecwid.com/forums/ There we will be able to check your website and provide more specific solutions for you.

How can i get the code html and css of my form please help me

how can i get the code html and css of my form

HI,
If you like to embed the HTML form in your web page then you will need to obtain the form code from the Distribite/Embed tab. Additional information can be found here: http://forums.adobe.com/docs/DOC-1991
You will not be able to access/modify the css code or the rest of the form html code. If you like to view the source of of a HTML page, please use your browser 'view source code' functionality.
I hope this answer your question,
Thanks,
Lucia

TS1702 My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

Try ejecting your iphone from iTunes and then close iTunes. Now retry. Hope this helps.

How do I get "verification code" to allow sharing photos via email and photomail with PSE11

Similar Messages

Maybe you are looking for