How do I get videos taken on my old I phone across to my I pad or new I phone?

How do I get videos taken on my old I phone across to my I pad or new I phone?

It appears only certain photos and no videos are backing up from the old phone (4s) therefore when I registered my new phone(4s) they didn't come across . What is also strange certain photos have not come across on photo stream on my I pad. My biggest problem being I want to reset my old phone but don't want to lose the videos or photos. Is there any other way of getting them across?

Similar Messages

  • How do i get videos taken on my iPad to imovie

    I took video on my iPad 2 and downloaded it to iPhoto.  I am trying to get it into iMovie but it will not transfer over.  The videos do not play in iPhoto either.

    Your videos are saved in Photos. There is no storage capability in the Apple TV. You can only view them by streaming the videos via Air Play. Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch - Apple Support
    I don't know which iPad you have so this may not apply but if you want transfer your videos to your iPad follow the steps in this article: iMovie for iOS (iPad): Transfer video and photos between devices

  • How do I get videos and pictures taken in the same event to show in a slideshow in the order they were taken?

    How do I get videos and pictures taken in Photos and the same Event to show in the order they were taken? Pictures and videos are seperated with videos at the end of both Photos and the Event.

    You're welcome.
    What's likely happened is that when you transferred the video to the new machine they lost their dates.
    Photos use the Exif metadata to record the date and time of the shot. This is quite different from the date and time of the file, which can change as the file is copied from place to place. Video doesn't have Exif, and so iPhoto uses the file date, and that's changed.
    Simply, there's no absoultely reliable way to date video.
    Try assign dates with the Batch Change command under the Photos menu.

  • Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

    kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
    (To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    4:24 PM Sunday; December 7, 2008

    kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
    (To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:19 PM Friday; December 12, 2008

  • How can I get video out to my TV from my old G4 AGP 450mHz?

    Hi all,
    just wondering if anyone has any idea how to get video out from my old G4 tower? It's an AGP model (1st gen), 450mHz. All I've found so far is a link to very expensive Radeon cards, well beyond what I need, which is:
    - S-video or even RCA out so I can see my computer on a TV screen
    - Solution for under or around $50
    That's pretty much it. I can't seem to find a VGA to S-Video adapter anywhere out there - does it exist? I don't have DVI on this machine either.
    I've Googled this all over, and I saw plenty of stuff to get a Mac Mini out with a DVI adapter, but this obviously won't work (no DVI)
    Any ideas?
    thanks
    mike
    Powerbook G4 867   Mac OS X (10.4.7)  

    Hmm... not a bad idea! I even checked and apparently an ATI Radeon 7000 supports video-out. Gonna see if I can get one for cheap - maybe on ebay. This will work fine with Panther or Tiger?
    I've even considered buying a PC version of a Radeon card and flashing it to work with my G4, but that is very sketchy, even for me.
    Will let you know how this turns out. Any other ideas are welcome
    mike
    Mike
    The not very expensive but also discontinued ATI
    Radeon 8500 Mac Edition AGP card has VGA DVI and
    S-Video out. Maybe you could try to find a used one
    on the market... I bough one through other world
    computing within the last year for not very much...
    Just an idea.
    M.

  • Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    See bottom section on AIM 6.5 and 6.8 on XP and Vista.
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or receiving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
    Between both of you.
    At least one camera (Mac end works better)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    PC end gets AIM 5.9 or Trillian Pro.
    The PC end allows the app through the XP Firewall.
    AIM 5.9 needs "Tuning" to Camera and Mic.
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    <hr>
    AIM 6.5 and 6.8 On Vista and XP
    AIM 5.9 or earlier can not be installed on Vista.
    AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
    AIM have an FAQ page about this
    Below the pics is this quote
    What do I need to use Real-Time IM?
    You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
    See items 5 through 13 on this page for alternatives including Web Browser based ones.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    This is the one I have been wating for
    http://discussions.apple.com/thread.jspa?threadID=406152
    kichat: Look and sound great in iChat!
    Ian's First FAQ
    Also New Today
    http://discussions.apple.com/thread.jspa?threadID=121775
    kichat: FAQ 2 - How to get my router to work with iChat?
    And
    http://discussions.apple.com/thread.jspa?threadID=121665
    kichat: FAQ 1 - What do I need to start in iChat ?
    11:20 PM Thursday; March 16, 2006

  • How do I get Video and Audio Chats with PCs ?:  FAQ 3

    How do I get Video and Audio Chats with PCs ? (Updated 24/11/05) iChat FAQ 3
    Applies to iChat 3.x and iChat 2.x
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    1 Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3
    A DSL (Broadband) connection of at least an up link speed of 256kbs.
    An AIM or .Mac.com account name.
    (hosting Multiple person AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link.
    Note: there is also Trillian Which has a Pro version for $25 that can also Video and Audio chat. The Basic just Texts and Audio Chats (AIM does not Audio chat)
    Some need the file from item 2 Here
    Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
    An AIM account/screen name (AOL or Nescape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall.
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then, Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound returned to you.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here
    My Web Pages
    Happy Chatting.
    Ralph

    Hi Ralph,
    Just a type, you misspelled Netscape...
    An AIM account/screen name (AOL or Nescape count as well)

  • How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening.

    How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?

    here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
    I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
    You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
    Here is the link;
    http://www.photosync-app.com/

  • I have an Iphone 5 How do I get videos to my WIndows 7 Pro PC

    I have an Iphone 5 How do I get videos to my WIndows 7 Pro PC.  Only photos move through Icloud to my PC.  Seems  like they are stuck on my iphone.
    Need help
    Thanks

    Windows 7 will download video just fine via the USB cable and your Import utility on the computer. Connect the device to the computer and it should open Auto Play and provide you a selection to import photos and video. The video would be saved in whatever location you have set up in Auto Play. Generally the default is the Video Library.

  • How can I get Video Recording! on my Blackberry curve 8320 ???????????? HELP PLEASSEEEEE

    Hi, Im a bet stressed out i just got the blackberry Curve 8320 from Tmobile and realized it has no Video recording however the person that sold it to me says they downloaded a program like a converter or something and they used to have video recording on it.  Can you please tell me how i can get video recording on mine Please. Thank you.

    to use video you need an upgrade. The name is handheld device software OS. I believe you have 4.2. 4.5 is required.
    You have to wait for TMobile to release the 4.5 OS.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • How do i get video out to connect to aprojector

    How do I get video out of my Ipod touch(4th gen) to connect to my projector. I have the correct cable and the projector work fine when connected to my laptop, mirrors the creen correctly But I cannot get an output from my Ipod.Cheers

    hi
    I think I have found the app, I was not seeing  the obvious, so I can now play videos on the Ipod itself.  With regards the cable it is a Dexim unit which plugs into the long Ipod socket on the base.From that unit there is a cable terminated with jackplugs.One end into the dexim unit another into the projector. As I said it worked fine on a 2nd generation, I just played the video on the 2G Ipod and it came thru onto the projector. Hence my thought that it was a setting and/or app on the 4thG Ipod.
    Again many thanks for all your help, at least it is improving my knowledge of Ipod
    Cheers
    PS started with the ipod download guide but the problem isnt addressed hence my plea on this forum.
    PPS I've emailed Dexim to see if just in case the unit  I have isn't compatible with 4thg Ipod for some reason

  • How can I get videos from iTunes US, living in Switzerland?

    Hi guys =)
    I have already pre-ordered the iPod Touch and alomost can't wait until the 2nd October =P
    Well, I am a big fan of Dr House and Desperate Housewives. I saw that I cannot buy videos on the swiss iPod Store.
    I wanted to know how I could get videos from the US iTunes Store. Is that possible? And if it is do I need a credit card or a gift card?
    Hope it'll be clear enough... Usually I don't explain the things very clearly =P
    Thanks for your help

    Deggie - what is better fraud or theft? To get video content on my iPod Touch I'm going to have to resort to one or the other. Your ethical advice would be appreciated....I spent 500 EUR on this, now I want my money's worth.

  • Hi. How do I get video to autoplay in Ibook Author?

    Hi. How do I get video to autoplay in Ibook Author?

    You are going to have to give us a lot more information than that.  We need to know what MacBook Pro you have.  What version of OSX (these things should be in your profile).  What are you trying to do.  What program.  What kind of video.  We are completely incapable of guessing what's going on, so if you want an answer, you need to give us information.

  • How do I convert videos taken from iphone 3gs to burn to dvd

    how do I convert videos taken from iphone 3gs to burn to dvd

    http://handbrake.fr/
    Of course you'll also need some kind of software to actually burn the DVD.

  • I had someone hack into my Itunesaccount and buy something How do I get it taken off?

    I had someone Hack into my computer and purchase an App , I do not know who this is. How can I get it taken away and get my Money back?
    In had received a $50.00 gift card from my husband for Valentines day, the next thing I know , I have .83 cent left on my acccount.. Please help!!!!

    you cant delete the app from your acct, once something is purchased with your apple id it stays there for life, you can hide it though, by going to itunes store on ur itunes program on comp, you can then go to purchased and click the x on the app there, it will hide it, but in the meantime you need to contact itunes store via the expresslane @
    expresslane.apple.com and file a case with the itunes store choose itunes, itunes store, then account redemption and billing, they will refund the money to you.

Maybe you are looking for

  • RFC system error in system/destination TMSADM@P3Q.DOMAIN_P3D Msg No. XT107

    Dear All, Whenever I run Transaction STMS and select the quality system, It is asking password in order to see the requests. Whenever I provide the password, then I can see the request numbers but I cannot see the short text maintained for that. But

  • Comp crashed - didnt backup songs - can i get my old music back?? =(

    so i bought a new vaio - installed itunes and racked up a decent library. got the lovely "os not found" error and sent the lappy to sony. they gutted it and put in a new hard drive and now i have a new library but my old music is nowhere. most of it

  • Provisioning team number

    Hi, I have tried to have a phone line installed but there was a problem with the phone pole that needs BT to sort, I got through to the provisioning team on Monday and they said they would call me back yesterday with some info but they didn't. What's

  • Missing Contact Details in Text address book

    I have a 6500c and have noticed that i have a full list of contact details in my address book (sync'd with my PC) but when i go to send a text and access my address book via the text window i am missing about 100 names... any ideas what's wrong and h

  • Htmlb:tableView event navigation within frameset

    hello, i have a problem with event navigation in a frameset triggered from htmlb:tableView. the structure of my bsp-application: DEFAULT.HTM       <frameset noresize cols="70%,*">           <frame src="links.htm" name="left">           <frame src="re