How do i hyperlink to certain portion of a page

I had to start a blog page for every team and from a sports page i made a hyperlink to each different page. instead i would like to just have all information in one page and just put all hyperlinks at top and when clicked on it it goes to that certain portion of the page how do i do that. Ph the name of my website is www.mychamperico.com its in spanish, the sports page is labeled deportes..
Message was edited by: MyChampe

iWeb doesn't support anchors.
this is incorrect, iweb supports and generates <a href , see anchor definition:
http://www.w3.org/MarkUp/1995-archive/Elements/A.html
look at iweb photos page, the thumbnails url is the photos page url appended with #(number)
however, iweb doesn't allow users to add within page anchors.
But Peter Berglund introduced us to a method using HTML snippets in his blog
using HTML Snippets as anchor markers is fine for a simple page.
but what happen when the OP has three anchor markers and other HTML Snippets for video, hit counter and what not.
then next week, the OP needs to add more HTML Snippets for video and what not, plus another dozen anchor markers.... see what I'm getting at?
the OP pretty has much two options:
1) mentally juggles the HTML Snippets and hopefully gets it right.
2) publish the page to a folder, then look at the page source to find which/where and what the HTML Snippets.
this is because you have no control on how iweb assigns id attribute for the HTML Snippets.
that said, you can do away with within page anchor with javascript and http://script.aculo.us/, here is my example:
http://cyclosaurus.com/iWeb3Widgets/Anchors/Anchors.html
another benefit with my example is 'jump to' horizontal markers is much better than the old anchor.
all code is linked to the example.

Similar Messages

How do I print just a portion of a page.

How do I print just a portion of a page from my I-pad? Such as a recipe.

this is how I do it: select the portion you want to print, COPY AND PASTE TO BLANK PAGE IN an app then you will only be printing what you want

How to create hyperlinks to places on the same page?

This is the question really. I want to have a list of topics at the top of a page as hyperlinks which would then direct readers to an appropriate place on the page (e.g. for FAQ page: list of questions first - as links to the places on the page where they are answered). Is it possible with iWeb?
Many thanks in anticipation...

Although not a smooth method Peter Berglund uses HTML snippets to simulate anchors on web pages. He describes his method in his blog here: How to use Anchors in iWeb.
If you don't have a lot of other widgets on your page it's fairly easy to implement. With other widgets for other purposes it's more difficult but can be done.
OT

How do I make a certain webpage my "home page"?

I want to make a certain web page my home page, and I cannot figure out how. How do I set, for instance, www.google.com as my home page, or the page the browser automatically opens to?

Hi ttt222454545,
Thanks for visiting Apple Support Communities.
Here's how to change your Safari homepage:
Safari 6 (OS X Mountain Lion): Select your homepage
http://support.apple.com/kb/PH11857
Open Safari if it is not already open.
Choose Safari > Preferences, and then click General.
Do one of the following:
To use the page in the current Safari window or tab, click “Set to Current Page.”
To use another page, type its address in the Homepage field.
To use a blank page, delete the contents of the Homepage field so that the field is blank.You can also choose Empty Page from the “New windows open with” and “New tabs open with” pop-up menus.
To make the homepage appear whenever you open a new Safari window or tab, choose Homepage from the “New windows open with” and “New tabs open with” pop-up menus.
Cheers,
Jeremy

How to create pdf of a portion of a page

Adobe Acrobat offers the possibility to create a pdf of a selected part of a page by using a zoom factor and by moving the content of the page so as to decide which part of my illustration will fill my e.g. A4 page.
Is there any way to do this with the normal Apple on-board pdf creation tool?
Thank you all for help!

Thanks for your support. Screen shot has the disadvantage of low resolution. Printing the entire page and cropping it thereafter has the disadvantage that it does not fill the entire page anymore. It is just smaller.
So it comes close but still it is not exactly that what I am looking for.
Thank you all and regards from Vienna.

IMovie audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !

iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.

I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped!

Black Out Certain Portion Of The Video

I am super new to the Final Cut Pro X. I have a very simple question. I want to black out or remove a certain portion of the video without cropping that part. Below is an example image from the video:
You can see a blue text on the left top corner. I want it gone without cropping it. It should be black like the area behind it. Can somebody guide me how i can acheive that. Thanks!

Add a black custom generator above the clip.
Adjust the shape and size and then move it over the date.

How do I only get certain questions appear in the quiz results?

I have created a course through Captivate 6, throughout the course there are questions to guage the learners attention. There is also a quiz at the end. However, captivate includes on the questions throughout the course on the quiz results which I do not want to happen.
Can anyone advise how I can only get certain questions appear on the quiz results please?

Branch aware turns off the playbar in 6 (not in 7 any more, at least not for me).
Could you explain more in detail what you want, because I don't understand it. You want the user to answer all questions, but the score should only show what? If you don't want some questions to have a score added to the Quiz total, you can indicate that in the Properties of that Question slide.
And please, tell the exact number (3 versions of 6), and also if you have to report to a LMS?
Lilybiri

How do you HYPERLINK a web page address to an EXCEL document in Firefox like is possible in Explorer

How do you HYPERLINK a web page address to an EXCEL document in Firefox like is possible in Explorer?

When you follow a hyperlink in Excel, usually it should open in your default browser. You shouldn't have to do anything special in Excel to create the link when Firefox is your default browser compared with IE. However, the Insert Hyperlink dialog might work differently. I think it might be able to automatically pre-populate a URL from IE, while in Firefox, you need to copy the URL from Firefox's address bar and paste it into the Insert Link dialog.

I do not want all of the playlists in iTunes to be synced to my iPhone. With iCloud I do not seem to have a choice. How do I select only certain playlists for my iPone?

I have many songs and playlists in my iTunes account. I do not want all of them synced to my iPhone 5S, but that has happened via iCloud, and it has caused a storage problem on my phone. How do I select only certain playlists to be synced to my iPhone?

You need to start over with Music. On the iPhone Music screen uncheck sync music. Also, on the Summary screen uncheck "Manually manage music and videos", then sync and it should clear off your phone.
Next, choose the music you want to sync. If you want to fit more on check "Convert higher bit rate songs to 128 kbps AAC". This will reduce quality slightly, but it won't be noticable unless you are using $300 headphones.

When I AirPrint it only does small portions of the page. How do I get it to print the whole page?

When I AirPrint The printer only prints a portion of the page. How do I get it to print the whole page.

It would help if you stated what printer you are using and what application you are doing the printing from. Also, what are you printing?

How to provide hyperlink for a particular field in ALV

Hi,
How to provide hyperlink for a particular field in alv report.
Regards,
Ramu.

Yes you can do that. using the fieldcatalog there is an option for that. give HOT_SPOT = 'X'. for the column you want.
wa_field-hotspot = 'X'.
REPORT ztest_alv.
TYPE-POOLS:slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
     wa_field LIKE LINE OF it_fieldcat.
DATA: BEGIN OF it_likp OCCURS 0,
       vbeln TYPE likp-vbeln,
      END OF it_likp.
DATA: layout TYPE slis_layout_alv.
wa_field-fieldname = 'VBELN'.
wa_field-tabname = 'IT_LIKP'.
wa_field-hotspot = 'X'.
wa_field-outputlen = 10.
wa_field-no_zero = 'X'.
wa_field-seltext_l = 'Sales'.
APPEND wa_field TO it_fieldcat.
SELECT vbeln FROM likp
UP TO 10 ROWS
INTO TABLE it_likp.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program      = sy-repid
    is_layout               = layout
    i_callback_user_command = 'USER_COMMAND'
    it_fieldcat             = it_fieldcat
TABLES
    t_outtab                = it_likp
EXCEPTIONS
    program_error           = 1.
*&      Form user_Command
*       text
*      -->UCOMM      text
*      -->SELFIELD   text
FORM user_command USING ucomm TYPE sy-ucomm
                    selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      SET PARAMETER ID 'VL' FIELD selfield-value.
      CALL TRANSACTION 'VL02N' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_Command

How to remove hyperlink in Reports Region

How to remove hyperlink in a Report region (Based on some filter condition)
Example : In Report Region, I am getting value as 10, 20, 30, 0, 44, 55, 0
In the above value, I need to remove the hyperlink for 0 values.
Can anyone help me to resolve this issue.
Thanks in advance.
Regards
Balaji S

If you want a link column for values other than 0 and a blank for those with 0 then the best way to do this is to use a case or a decode to return a LINK image or text to a hidden column; I usually return the Edit icon only. You can then use the 'column link' region on a different column to create a link in the usual way and set the Link Text to the hidden column (e.g. #EDIT# in the example below). If you have set the target page to require a Checksum this will then be added without having to code it into your sql. E.g.
SELECT some_columns,
CASE WHEN numcol != 0 THEN '<img src="#IMAGE_PREFIX#e2.gif" alt="">'
ELSE null
END "EDIT"
FROM your_tableIf you want the same column value, but those of 0 to not have a link and those other than 0 to have a link then you need to code the link into your sql. e.g.
SELECT some_columns,
DECODE (numcol,0,numcol,'<a href="f?p=&APP_ID.:11:&SESSION.::&DEBUG.:11::">'||numcol||'</a>') "EDIT"
FROM your_table# = your URL e.g f?p=&APP_ID.:11:&SESSION.::&DEBUG.:11::
If you require a checksum on the link you need to add the apex_util.prepare_url function to the URL.
Cheers
Shunt

How to remove hyperlinks in a word document

how to remove hyperlinks in a word document

Go to your "Insert" drop down menu.
Select "Hyperlink", near or at bottom.
You will get this dialog box:
Look at the lower left corner... see the button "Remove Link"?
Click on it...and hit the "OK" button in the lower right...
Since this was a Word question, and not a Mac Pro question, it would have been better to post it here http://www.msofficeforums.com/word/

Hyperlinks, how can I zoom in on part of a page on a pdf.

I have made a 12 page pdf with hyperlinks in Indesign. The contents page has 2 links to a page.
The 1st link is to the page as a whole and it jumps to the whole page and thats ok..
The 2nd link refers to a small paragraph on the same page but jumps to the whole page.
Both links do exactly the same thing. So whats the point in 2 links?
How can I make the 2nd hyperlink zoom in on the small paragraph of type only?
Please help
Frank

I don't think there is a way to assign a zoom view for a link within Indesign. In Acrobat, you can assign a page view that zooms in on a specific area.
Here is a suggestion. Instead of two links that goes to the same page, use only one. When the user is on this particular page, create a rollover that is a zoom in view of the paragraph.

How do i hyperlink to certain portion of a page

Similar Messages

Maybe you are looking for