How do i incorperate the web gallery into my own web site?

I have a web site and i want to incorperate the web gallery created with Aperture in to it but i cant seem to get it right. I use fetch to upload and I renamed the "index.html" (from the aperture gallery) to a relevent link name but it just does'nt work.
Ive created the original web site with "Freeway 3"
I would be gratful if anyone could assist me.
Kind regards

I might be wrong, but it seems to me that what you're doing wrong is not pointing your main site into the gallery's folder structure. That is, there's no need to rename the index.html file that inside the gallery folder created upon export; you just have to point your main site's home page (or whatever page you want to set up a link to your gallery from) to the index.html file in the gallery folder.
For example, let's say your main site's home page is at http://www.yourdomain.com/index.html, and you've exported your new gallery to a folder named newgallery. All you have to do is create a link in your main site's index.html that points to newgallery/index.html (actually, you only need to point to the folder newgallery, since browsers will look inside the folder for a file called index.html, or home.html, or index.php, or a few others). The gallery folder's structure provides all the images, links, navigation, etc., for the gallery, starting at it's index.html page, but changing the name of that file doesn't tell your main site's index page to go to it. In fact, it doesn't do anything at all.
I hope this helps, but if I've misunderstood your problem, please excuse this post.
Mark

Similar Messages

  • How do I embed a photo gallery in my own web page design?

    I have a photo gallery that I'm just starting, and I want to embed it into my existing design. I can't seem to figure out how to do that. I tried copying and pasting the frame and code, but it doesn't pull the images.
    New gallery full page (it works, but how do I move it?)
    http://victorylcms.org/newsite/flashmo/flashmo_060_photo_gallery.html
    Page I'd like to put it in (you can see that it's not pulling any content like I imagine it should)
    http://victorylcms.org/newsite/Photos.html
    Example of it embedded on a page (not mine)
    http://www.flashmo.com/preview/flashmo_060_photo_gallery
    Thanks!

    All that other site did was use a table layout and put the gallery within a table cell.  The same effect could be done with a container div.
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0" name="flashmo_060_photo_gallery" width="800" height="800" align="middle" id="flashmo_060_photo_gallery">
           <param name="allowScriptAccess" value="sameDomain" />
           <param name="movie" value="flashmo_060_photo_gallery.swf" />
           <param name="quality" value="high" />
           <param name="bgcolor" value="#000000" />
           <embed src="flashmo_060_photo_gallery.swf" quality="high" bgcolor="#000000" width="800" height="800" name="flashmo_060_photo_gallery" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
         </object>
    That's the only code you need to bring over from the first page to your page.  Then just make sure paths are all set so that your other page can read the flash file and you should be good to go.

  • How to import Bridge CS4 photo gallery into Dreamweaver CS4?

    I'm a novice when it comes to web design, but am starting to master DW CS4. While searching for a way to create good looking photo galleries I found an online video explaining how to do it using Bridge. The process in Bridge was strainght forward and simple. However, I have not found how I can bring the photo gallery I created in Bridge into a page based on a template in Dreamweaver. Can it be done? How?
    I designed a template for our website which I would like to use for any photo galleries in order to maintain the same "look and feel" and ease of navigating within our website (www.aquacomgroup.com).
    Please help!

    I'm having the same problem & desperate to find out how to do this!! Help!!

  • Embed Lightroom Web Gallery into Dreamweaver

    Hi.  I've created a web gallery (lightroom html gallery) using Lightroom 3 and I am wanting to embed it into an existing website that I am working on in Dreamweaver CS5.  I've tried many things but nothing seems to work.  I've copied the gallery folder into the website folder and uploaded it straight to the site and that doesn't work.  As well as changing the index.html and index_2.html (2nd page of gallery) to matching titles of a link that is meant to open up straight to the gallery and it still doesn't work.  I've been trying for countless hours and can get nothing. Somebody please help on how to embed a lightroom gallery into an existing dreamweaver site so that it fully works.

    I'm not sure I completely understand your problem, because linking to a Lightroom gallery is actually very simple.
    Design your Lightroom gallery and upload it to your server. Just do it directly from LR. Let's suppose you have uploaded it into [your webroot folder]/galleries/test/.
    Don't rename any of the index files.
    Check it has actually worked, by visiting http://celestialapple.zxq.net/galleries/test/index.html with your browser.
    Create a link to the gallery on your home page. The source code for the link is <a href="/galleries/test/index.html">Other Photoshop gallery</a>
    And that's it already.
    Cheers,
    Michael

  • Embed Photoshop Web Gallery Into Site

    I have been furiously scouring the internet for a tutorial,
    walk though, or simply any information at all on how to embed a
    Photoshop Web Gallery into a website that I'm creating using
    Dreamweaver; unfortunately, I have found nothing of value. The
    closest thing I found is someone saying "I just copied the html to
    a table in dreamweaver..." which doesn't help a complete novice
    (like me) at all.
    If anyone could direct me to a thorough tutorial or writeup
    the steps to take it would help me
    tremendously. Thanks in advance for any and all help.

    > Is it possible to embed a Web gallery that is in my
    remote files into a
    > template page so it will match my Web site?
    Yes. Let's see your page as it stands now. Can you upload it
    and post a
    link?
    The Object Not Found message means that there is a javascript
    object that
    has been left out of the page. A look at the code will tell
    which one that
    is.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "sumnerweb" <[email protected]> wrote in
    message
    news:g6l8h6$m2b$[email protected]..
    >I used CS3 to creat a Web gallery. We like all of our
    pages to use our
    >server
    > side includes. I tried copying the code from the Web
    gallery index page
    > into
    > one of my pages, but it didn't work. I get the gallery
    heading and info,
    > but no
    > pics. Where the thumbnails and images should be I have
    "Object not found!
    > The
    > requested URL was not found on this server. the link on
    the referring page
    > seems to be wrong or outdated. Please inform the author
    of that page about
    > the
    > error."
    >
    > Is it possible to embed a Web gallery that is in my
    remote files into a
    > template page so it will match my Web site?
    >

  • Windows 7 64 bit Dreamweaver CC 2014 & Lightroom 5: Trying to insert a lightroom web gallery into a template in Dreamweaver

    I am using a template for my website in Dreamweaver CC 2014. I installed a lightroom 5 web gallery into the template. I have an editable region where my main content goes that is where I inserted the web gallery. The main content css height is set at Auto. The web gallery shows up but only the very top half of the gallery. The whole web gallery wont push down the main content section so you can see the whole gallery. If I set the main content at height 700px then the whole gallery shows up, but because this is a template it screws up all my other pages because of the height setting. I need that to be variable. What am I doing wrong?

    Most likely that main content area also contains a floated element and you are not clearing the float before closing the main content container. Floated elements are removed from the normal flow. Being removed from the normal flow means that a container for that floated element does not regard the floated element as being in it, and will collapse around its non-floated content. To prevent this from happening you should clear the float before closing the container, e.g.,
    <div>
    <img src="very-tall-image.jpg" style="float:left">
    <p>some content</p>
    </div>
    This div will only be as tall as the paragraph tag requires, thus truncating the image.
    But here -
    <div>
    <img src="very-tall-image.jpg" style="float:left">
    <p>some content</p>
    <div style="clear:left;"></div>
    </div>
    This div will show the whole image.

  • Adding web gallery into existing website

    Hi,
    Does anyone know if you can add/import a lightroom created web gallery into an existing webpage? I am redoing my website (originally created with Frontpage, now considering using Expression Web) and want to create photo galleries using lightroom. I know you can create the same type of gallery using Flash, however I don't want to buy a new program when I have lightroom already. I don't have enough experience with HTML to use Dreamweaver.
    Thanks!
    Nancy

    This previews just fine from Dreamweaver but when uploaded non
    of my images load. Please see www.jakgallery.com/19701979
    All I get is the circular wait icon. Thanks very much for any help you can give. It seems I am one little step away from making it work.
    Mike

  • How do i send the username and password to yahoo web page through url

    how do i send the username and password to yahoo web page through url i.e as Query string so that my account in yahoo will open...

    If you don't mind using a library, then download and use the Apache HttpClient library. It takes care of all these details for you.

  • I ended up having two id's, one being my original when first getting into itunes and the other came when I opened a me account.  I have purchases under the original id.  How do I merge the old account into the new account

    I ended up having two id's, one being my original when first getting into itunes and the other came when I opened a me account.  I have purchases under the original id.  How do I merge the old account into the new account

    Sorry, but it is not possible to merge two Apple IDs/iTunes Store accounts.
    Regards.

  • ITunes is indicating i have another iTunes library, how do I combine the 2 libraries into 1? Previous computer was a PC using iTunes.

    iTunes has indicated i have another iTunes library, how do i combine the 2 libraries into 1?
    My previous computer was a PC. I synced iTunes with my iPhone until the hard drive died, then I bought an iMac.
    Thanks for you help.

    I want to be able to transfer my apps from my original itunes account that I have on my personal iphone 3 and work ipad 3 to my work iphone 4S ,as well as purchase more more apps for the work iphone with the original itunes account.  Plus I need to sync all 3 of them with my work tower computer.  I really appreciate you're trying to help me out.

  • I have icloud and downloaded new CDs on my 2nd computer.  How do I download the new music into my old computers itunes.

    I have icloud and downloaded new CDs on my 2nd computer.  How do I download the new music into my old computers iTunes using icloud.

    For your computer first get iTunes to see it by:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    - The transfer iTunes purchases
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Or redownload them by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    - Transfer other music by using a third-party program like one of those discussed here:
    newer copy
    - Connect the iPod to your compute and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the backup that iTunes makes does not included synced media like apps and music.

  • How to SIMPLY use the %DIMENSION_TO_SET% variables into logic scripts

    hello,
    I'm using a prompt of type "COPYMOVE" or "COPYMOVEINPUT". In this type of prompt, there are 2 columns of dimension members list, one for defining the "source zone" and one for defining the "target zone" of logics.
    The left colum of the prompt (for source zone) feeds the variables %DIMENSION_SET% : %ACCOUNT_SET%, %ENTITY_SET%, %CATEGORY_SET%, etc...and these variables can be used in the logic scripts in *XDIM_MEMBERSET instructions for example.
    The right colum of the prompt feeds the variables %DIMENSION_TO_SET% : %ACCOUNT_TO_SET%, %ENTITY_TO_SET%, %CATEGORY_TO_SET%, etc...and I don't know how to SIMPLY use these variables in the logic scripts.
    I've found a tricky way to do that but I meet 2 problems :
    - it is complicated
    - the multi-info instruction (BEGININFO/ENDINFO) seems to be bugged as blank lines are added all the time in the code and sometimes I have to wait for minutes when I try to modifiy the package code through BPC for excel eData/modify package menu.
    So the question is how to SIMPLY get the %DIMENSION_TO_SET% variables into logic scripts and use them ? Thanks, R.
    Here is the tricky package code I use at this time (I build one function for each %DIMENSION_TO_SET% variable and I pass these functions to the logic) :
    PROMPT(COPYMOVE,,,,"ACCDETAIL,ACCOUNT,CATEGORY,DATASRC,ENTITY,TIME,YEARS")
    TASK(Execute formulas,USER,WS-WW\PlauchuR)
    TASK(Execute formulas,APPSET,US)
    TASK(Execute formulas,APP,SV)
    TASK(Execute formulas,SELECTION,D:\BPC\Data\WebFolders\US\SV\PrivatePublications\PlauchuR\TempFiles\FROM_1561_.TMP)
    TASK(Execute formulas,TOSELECTION,D:\BPC\Data\WebFolders\US\SV\PrivatePublications\PlauchuR\TempFiles\TO_1561_.TMP)
    BEGININFO(%FSS%)
    *FUNCTION TARGETACCDETAIL=%ACCDETAIL_TO_SET%
    *FUNCTION TARGETACCOUNT=%ACCOUNT_TO_SET%
    *FUNCTION TARGETCATEGORY=%CATEGORY_TO_SET%
    *FUNCTION TARGETDATASRC=%DATASRC_TO_SET%
    *FUNCTION TARGETENTITY=%ENTITY_TO_SET%
    *FUNCTION TARGETTIME=%TIME_TO_SET%
    *FUNCTION TARGETYEARS=%YEARS_TO_SET%
    ENDINFO
    TASK(Execute formulas,FORMULASCRIPT,%FSS%)
    TASK(Execute formulas,LOGICFILE,D:\BPC\Data\WebFolders\US\SV
    ..\AdminApp\SV\_TEST.Lgf)
    TASK(Execute formulas,RUNMODE,1)
    TASK(Execute formulas,LOGICMODE,1)
    Edited by: ALEXANDRE BEDIER on Jun 16, 2010 3:15 PM

    hello,
    finally I've discovered that there is no need of BEGININFO instruction.
    One can pass several functions to a logic with one FORMULASCRIPT task. The functions definitions have to be separated by instructions. See below :
    PROMPT(COPYMOVEINPUT,%FTARGETS%,,"select source and target zone for category and datasource.","ACCDETAIL,ACCOUNT,CATEGORY,DATASRC,ENTITY,TIME,YEARS")
    TASK(Execute formulas,FORMULASCRIPT,*FUNCTION TACCDETAIL=%ACCDETAIL_TO_SET% *FUNCTION TACCOUNT=%ACCOUNT_TO_SET% *FUNCTION TCATEGORY=%CATEGORY_TO_SET% *FUNCTION TDATASRC=%DATASRC_TO_SET% *FUNCTION TENTITY=%ENTITY_TO_SET% *FUNCTION TTIME=%TIME_TO_SET% *FUNCTION TYEARS=%YEARS_TO_SET%)
    TASK(Execute formulas,USER,%USER%)
    TASK(Execute formulas,APPSET,%APPSET%)
    TASK(Execute formulas,APP,%APP%)
    TASK(Execute formulas,SELECTION,%SELECTIONFILE%)
    TASK(Execute formulas,LOGICFILE,%APPPATH%\..\AdminApp\%APP%\_TEST.LGF)
    TASK(Execute formulas,RUNMODE,1)
    TASK(Execute formulas,LOGICMODE,1)
    Then one will be able to use the functions TACCDETAIL, TCATEGORY, TACCOUNT,... in the logic script.
    Edited by: ALEXANDRE BEDIER on Jun 24, 2010 10:31 AM
    Edited by: ALEXANDRE BEDIER on Jun 24, 2010 10:33 AM

  • How can I convert the volume directory into a single file installer?

    How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

    On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
    Are you choosing the second option (self-extracting Zip file for software installation)?
    I have a word file that I created to help me remember - is there anyway to email it to you?

  • I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

    I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

    After you go to system preferences/keyboard/input sources as suggested by sberman, click on the + button and scroll down to Portuguese and select that.  Over at the right you will see the choices Brazilian, Brazilian abnt, Portuguese.  You might want to add all three to see which you like best.
    The "Brazilian" layout is pretty useless.  It is identical to the US layout and the only way to make accents is via the option key shortcuts:  option + n, then o gives you õ.
    The Brazilian abnt and Portuguese layouts have dead keys for adding accents over at the right edge of the keyboard.  But these may not match what is printed on your keys.
    You may prefer to stay with the US layout.  On that you can get accented letters by just holding down the base letter and selecting what you want from the popup menu that appears.  Or you can use the option key shortcuts.
    Another option is the layout called US International PC, which has accent deadkeys on ~, ', etc.
    Which ever layout you want to use, you must select it in the "flag" menu at the top right of the screen.
    To see which key does what for any layout, use the Keyboard Viewer:
    http://support.apple.com/kb/PH13746

  • How do I install the creative suite 6 design and web premium on a second device?

    How do I install the creative suite 6 design and web premium on a second device?
    When I enter the disc onto my new computer, it does not automatically ask if I want to load/run the install. Please help! Why is it not doing this? I have a windows.

    Simply run the setup.exe on the disc. Your auto-start is simply disabled.
    Mylenium

Maybe you are looking for