How do I initialize the ItemDetails screen when first presented for MDM WD
Hello everyone!
Iu2019m new to the world of netweaver ce and webdynpro for MDM and need a little help with what Iu2019m sure is a basic code problem for most of you. Please help if you can! I am a developer for MDM 7.1 sp06. We are now experimenting with Enterprise Portal using NetWeaver CE 7.2. I have create and deployed an application using NetWeaver Design Studio 7.2. I have also created some screens in the WD Configuration Manager for MDM.
The 2 interface views I have configured are u201CSEARCHu201D and u201CITEMDETAILSu201D. u201CITEMDETAILSu201D was limited to ADD/CREATE new items in MDM using the WD Configuration Manager options.
When I created the WD application in NWDS I also created a link with buttons between the 2 screens/views. When I then deploy my application and I press the button to go from my u201CSEARCHu201D screen/view to the u201CITEMDETAILSu201D ADD screen/view, All I see is a u201CCREATEu201D button and no other fields.
I expected to see every field without values in them just as I do when I u201CPREVIEWu201D the screen in the WD Configuration Manager . If I continue and press the u201CCREATEu201D button on the the u201CITEMDETAILSu201D view, The screen the then presented as I expected with all fields showing but without any values populated in them. I donu2019t want the user to have to press the create button the first time they are presented with this screen.
Can anyone tell me or give me a sample of code that will initialize the itemDetails view just as it is seen when previewed in the WD Configuration Manager?
Thank you
Steve
Thanks for the reply but I dont have any problem calling the ItemDetailsInterface. My problem is when I call the ItemDetailsInterface the screen that is presented has no data other than the buttons. I would like the ItemDetailsinterface to display exactly as it does when I preview the screen in WD configuration manager.
What I expect to see is... a screen showing all the buttons plus all the ItemDetails Fields but with the fields initilized as null. this would then allow my user to input the fields needed to create a new record. As it works now... when the user is sent to the ItemDetails view... all they see is the "Cancel" and "Create" button. They have to press the "Create" button 1 time inorder to present the screen a second time but this time witlh all fields presented.
I believe I have to set the "LeadSelection" or the "internalID" to -1 the first time thru the ItemDetails "DoInit" section. So far, no luck.
Similar Messages
-
I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
How can a see the full screen when watching youtube. Address bar is always in view.
Maps are foggy and some images overlap to eachother.
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
LuisLuis757 wrote:
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis
No, there is no legitimate way to downgrade iOS to an earlier version.
Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
You can leave feedback here: Apple Feedback. -
How to turn off the welcome screen when I start Illustrator
Can it be done. I know in earlier version it was under preferences, general. Don't see it in CC.
Thanks!!cghelton,
I believe this is your rescue:
Re: How can I turn off the Illustrator CC 2014 hello screen permanently? -
You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
This is the page that loads:
http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
How did Yahoo embed this in the Tab settings?Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
HT201493 How can I bypass the password screen every time open the app?
How can I bypass the login screen when I open the app?
Welcome to the Apple Community.
open what app? -
I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion
NicholasLiban -
When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process. This provides a complete install of the very latest version of Lion, including the recovery partition. The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple.
- Randy -
When I open Safari, I always type command-plus to enlarge the view. However, I can't figure out how to permanently set the Safari screen to this view setting in the preferences. Any ideas?
Sorry, but you must Command + for every page. It's not permanent.
If you haven't tried yet, check out Zoom in Safari > Preferences > Accessibility -
I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?
Hi Spookola,
I don't know how that could have happened. Go through the folders for the rolls and separate the 2005 rolls from the 2006 rolls, then import the 2006 rolls. -
When I open "mail" all that opens is the gray ribbon on the top.I have to go to "Mailboxes/inbox" to get it to aspen. What happened? How do I get the full screen to open when I click my "mail" icon like it used to?
Move your cursor way over to the right side of the window. There should be a thin bar. when you hover over the left side of the thin bar, the cursor will change to a vertical bar with an arrow sticking out the left. Click and drag to the left.
-
How do i get the black screen to go back on when im on a call to stop me cutting them on? x
When i am on a call, my iphone 4 used to black when i put my ear to the phone, this mechanism was to stop you touching buttons on your touch screen key pad, however mine no longer does this and i keep cutting people off on the touch screen how do i get the black screen back on when im on a call? x
I'm not sure what you are referring about.
Do you mean the orange Firefox menu button?
In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible whether the Menu Bar is visible or hidden.
You can no longer hide the Navigation Toolbar.
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.
*You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at near the top of the drop-down list.
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu as well as the tooltip of the star changes to "Edit This Bookmark".
*You can toggle the title bar on/off via the "Title Bar" button at the bottom left in the Customize palette window.
You can still have the Menu Bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks and History and Tools menus.
See also:
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox -
How can i initialize a button (Switch when pressed) to be always disabled when i start the programm.
Hello
How can i initialize a button (Switch when pressed) to be always disabled when i start the programm. My problem is that the state of the button is always the state in which it finihed last time.
Thanks
LukasA button is either true or false. "Disabled" is a property that determines if the button can be operated or not.
It seems from the rest of your question that you actually want to ensure that it is set to false, but remain enabled. This is easiest done with a local variable as already mentioned by becktho.
If you want to disable the button, use a property node.
LabVIEW Champion . Do more with less code and in less time . -
How to display the output screen when I use bdc.
hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
STANDARD TABLE
OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLWBABAP'.
wa_bdcdata-dynpro = '0100'.
wa_bdcdata-dynbegin = 'X'.
wa_bdcdata-fnam = 'RS38M-PROGRAMM'.
wa_bdcdata-fval = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro = '0200'.
wa_bdcdata-dynbegin = 'X'.
wa_bdcdata-fnam = 'RS38M-REPTI'.
wa_bdcdata-fval = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'TRDIR-SUBC'.
wa_bdcdata-fval = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSTRD'.
wa_bdcdata-dynpro = '0100'.
wa_bdcdata-dynbegin = 'X'.
wa_bdcdata-fnam = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSTRD'.
wa_bdcdata-dynpro = '0100'.
wa_bdcdata-dynbegin = 'X'.
wa_bdcdata-fnam = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSTRD'.
wa_bdcdata-dynpro = '0300'.
wa_bdcdata-dynbegin = 'X'.
wa_bdcdata-fnam = 'KO008-TRKORR'.
wa_bdcdata-fval = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'KO008-AS4TEXT'.
wa_bdcdata-fval = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF. " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada -
Using just the TV screen when using HDMI port?
Hi,
I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid. The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.
-
How i can show the selection screen input field in the top of page in alv
hi ,
how i can show the selection screen input field in the top of page in alv grid output.
tell me the processHi,
excample from my program:
FORM topof_page.
DATA: l_it_header TYPE TABLE OF slis_listheader WITH HEADER LINE,
l_info LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
if not &1 is initial.
clear l_it_header.
l_it_header-typ = 'S'.
l_key = '&1'.
translate l_key to upper case.
read table l_it_textpool with key key = l_key.
if sy-subrc = 0.
shift l_it_textpool-entry left deleting leading space.
l_it_header-key = l_it_textpool-entry .
endif.
loop at &1.
case &1-option.
when 'EQ'
or 'BT'
or 'CP'.
write &1-low to l_it_header-info.
when others.
write &1-low to l_it_header-info.
concatenate &1-option
l_it_header-info
into l_it_header-info
separated by space.
endcase.
if not &1-high is initial.
write &1-high to l_info left-justified.
concatenate l_it_header-info
l_info
into l_it_header-info
separated by space.
endif.
if &1-sign = 'E'.
concatenate ']'
l_it_header-info
into l_it_header-info.
endif.
append l_it_header.
clear: l_it_header-key,
l_it_header-info.
endloop.
endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
s_trmext,
s_trmint,
s_fkdat,
s_delno,
s_vbeln,
s_deact,
s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole -
how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.
If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
if ims is {} then return {}
if (length of ims is 1) then return {}
if i < 2 then return rest of ims
if (i = length of ims) then return (items 1 thru (i - 1) of ims)
if i > (length of ims) then return ims -- should be error?
return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
local numitems, ims_shuffled, nextrest, nextpick, i
set numitems to length of ims
if length of ims < 2 then return ims
set ims_shuffled to {}
set nextrest to ims
repeat until nextrest is {}
set i to (random number (numitems - 1)) + 1
set nextpick to item i of nextrest
set beginning of ims_shuffled to nextpick
set numitems to numitems - 1
set nextrest to removeItem(nextrest, i)
end repeat
return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
local imageSel, shuffled, i
tell application "Aperture"
activate
set imageSel to (get selection)
set shuffled to my shuffle_items(imageSel)
set fullscreen to true
if imageSel is {} then error "Please select some images."
repeat with i from 1 to count of shuffled
reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
end repeat
set fullscreen to false
return shuffled
end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
tell library 1
if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
end if
end tell
And to add the images from the shuffled list to the album:
repeat with i from 1 to count of shuffled
duplicate item i of shuffled to album "shuffledAlbum"
end repeat
Regards
Léonie
Maybe you are looking for
-
Second part of problem, which is actually the first part of problem, for the last 3 weeks or so, when I load iTunes, it loads the Previous iTunes Library, everything plays fine in Library, but when I selct the iTunes store, it loads, and as soon as I
-
Need help converting a document
I just purchased the adobe monthly plan and am trying to convert a document can you assist
-
Plant Replication Classic Scenario SRM 3.0
Hi, would anyone remember the report to replicate plants from R/3 into SRM in SRM 3.0 In 4.0 / 5.0 it is BBP_LOCATIONS_GET_ALL OR BBP_LOCATIONS_GET_FROM_SYSTEM But these so not exists in SRM 3.0 This is urgent. Regards, Rahul
-
Camera not in list for Digital Camera RAW Compatibility Update 3.11
Do I need this update if my camera isn't in the list of supported cameras?
-
I've just noticed that I have quite a few RSS Feeds in Safari (50+). I don't recall subscribing to most of these and am no expert on RSS feeds. I am wondering if this could be a reason that from time to time my Mac becomes highly unresponsive? Will d