How do I install Bootcamp on 2nd internal iMac drive?

Have a new iMac with a 1TB internal HD in addition to the SSD startup drive.
Can I, and if so how do I, install Bootcamp on the 1TB internal HD? Will the Bootcamp Assistant point out the 2nd internal drive and proper location during the install process?
I purchased this iMac w/wireless keyboard, mouse, and trackpad...is that going to be a problem during the Windows install?
Thanks,
David

Bootcamp actually gave me an option to install on the 2nd internal iMac drive and it's working like a champ!
Thinking I was relegated to a Bootcamp partition on my SSD startup drive, I went ahead and delved into the Bootcamp install, only to find an option to install on either my SSD startup drive or my 2nd internal iMac drive. I simply chose the 2nd drive and lo, and behold, as I hold the Option button down on startup, both of my operating systems (OS X and Windows) available for selection.
Thanks for all the help, but it looks as though the latest edition of Bootcamp has addressed this issue, I am quite pleased.
David

Similar Messages

  • The guide to bootcamp assistant states that bootcamp can only be installed on a drive with a single partition. New Macs with Lion preinstalled have two partitions - the second is a recovery partition.  How do I install Bootcamp?

    Late in August 2011 I took delivery of a new 27" iMac with Lion preinstalled.  I need to run Windows as well. Following Apple's written suggestion, I printed off the then current 12 pages of the document "Bootcamp Installation & Setup Guide" which clearly stated that the hard drive you were going to install on had to have on it, before install, a maximum of one partition.  Using finder and disk utility I determined that there was only one partition.  Unbeknownst to me, there was (is) an additional hidden (from those two pieces of software) partition on the disk.  As of machines delivered new with Lion preinstalled, Apple has begun to include a "recovery partition".  In that partition there is a copy of the software necessary to reinstall Lion via a download from the Apple App Store.  Not knowing the partition was there, I cranked up  "Bootcamp Assistant" which nicely offered to repartition my hard drive creating a "Bootcamp Partition" in addition to the existing.  I told it how big to make each and hit the do it button, subsequently destroying my operating system.  Oh, it very nicely told me, after the damage was done, how many partitions were REALLY on the disk and that I could not install Bootcamp cause there were too many partitions.
    Luckily the the Recovery Partition, which at that point I knew existed, was not harmed and after doing some research on another compter, I used it to once again download Lion from the App Store and reinstall. So, I have recovered but am still stuck with the problem:  how do I install Bootcamp in this new environment?

    First you need to seriously back up your Mac.
    A clone is an exact duplicate of your existing Mac HDD. Merely copying and pasting a drive will not make a bootable backup. In case of problems you can boot from an Ext HDD clone and use the utilities to repair, reformat, or clone the Ext HDD back to the internal Mac HDD.  While Time machine back ups are easy you can not boot from it. The best thing to have for any kind of problem is a bootable clone backup on an external drive. Some even have two external backup drives in case one fails. There are two good apps for cloning named SuperDuper and Carbon Copy Cloner.
    In dealing with the recovery partition a simple approach is to clone the Mac partition to an external disk then re-partition the Mac to a single partition (GUID partition table) . Then clone the external disk clone back to the Mac. You will now have only one Partition and Boot Camp assistant sould not object.
    Some have recommended getting rid of the recovery partition while others have advised not to do this. If you have the Lion USB Thumb Drive you do not need a recovery partition so can discard it without concern. There is another way to get rid of the recovery partition if you decide to do it but first be sure to have a backup of your Mac ( I know I sound like a nagging mom but many dead computers have been saved by this simple precaution).
    Use Disk Utility.
    1) Make the Recovery visible in Disk Utility by using a program like Secrets:http://www.macupdate.com/app/mac/27025/secrets or MacPilot:http://www.koingosw.com/products/macpilot.php (15 day free trial).
    2) Highlite the Recovery partition and Control click it and select Mount the partition.
    3) With the Recovery partition highlited, erase the partition, you'll get an error message, ignore it.
    4) Now highlite the top identity of the hard drive and select the partition tab.
    5) Highlite the Recovery partition and press the minus sign.
    6) Click and hold on the bottom edge of the partition above and drag it to the bottom, if it doesn't go there automatically, the press apply.

  • How do I install Bootcamp on Windows 7.

    I have just installed Windows 7 on my Mac Mini and now I want to switch back to the Mac OS. When I hold down Alt while booting up to change OS nothing happens.
    The other option is to install Bootcamp to work with windows. It's already on my mac as I used it to install Windows 7. But there is no option to switch OS with Bootcamp as I can't find it on Windows 7. I've seen tutorials on how to install it with a disk but the Mac mini has no optical drive.
    How do I install Bootcamp on Windows??

    At first I was under the impression i had accidentily deleted the MAC OS but thankfully I haven't. I did a system restore on Windows and when it restarted I held Alt and I could select my OS.
    But I still don't have the shortcut to bootcamp showing in windows. How do you make a bootable USB for Bootcamp?

  • How do I install bootcamp so I half both my ssd and hdd?

    How do I install bootcamp so I half both my ssd and hdd for windows and lion?

    Sorry about that one. There are THREE not just two, about SSDs, and the iMac SSD + hdd one.... well  that one was private (not sure why).
    Most questions have been asked/answered, multiple more than once, times, and therefore: public bookmarks and search please. (some gets asked almost daily, a few multiple times in one DAY of all things).
    I'd like to see pdf guide and error messages, faq and how to articles re-written, updated, and checked for errors.
    www.apple.com/support/bootcamp is where I usually send people to seek out the pdf and do some readiing and backups. you will need backup no matter what.
    Windows won't install iwth two drives/devices with GPT so you have to remove or reformat the data drive for now.

  • Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down after install of new 2nd internal WD IDE 320 gig hard drive, OS 10.4.11, orig HD is WD 80, RAM = 2 gig.  Help!

    Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down, is now occuring after install of new 2nd internal WD IDE 320 GB hard drive, running OS 10.4.11, orig HD is WD 80 GB, RAM = 2 gig.  Help!

    Hi Ted,
    At this point I think you should get Applejack...
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    Ignore the MacKeeper ad no matter what else you decide.
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.

  • Installed Samsung F3 1TB internal Hard drive configuration partition

    Hi,
    Have just installed a Samsung 1tb internal hard drive and now it comes to formatting and partitioning it not sure what amount of gb and how many partitions to do. I have all my itunes music and films stored on an external 1tb hard drive for information, and also have an external 320 gb drive for back ups. So any ideas what to do with the partitions and gb on the internal drive.

    There will be a lot of views on how the drive should be partitioned, so I will offer my opinion, and state it is only one opinion.
    Take a look at the amount of space you have been using for your operating system, are you planning on upgrading the OS, and then set a partition for only the OS. Make it large enough to allow for future upgrades, maybe 30-40 GB larger than needed so there is enough space for doing installs.
    Keep a partition large enough for all of your software, maybe have that be most of the remainder of the drive after the OS partition.
    Since you keep music, etc., on an external drive it should be easy to keep the internal drive in good shape and unfragmented.
    You could set a partition for temporary files, the /tmp file system, but it is easy to fill that up with a lot of web surfing and get yourself in trouble on space.
    Anyway, my view is a good size partition to allow for OS and future OS installs, and the rest for software.
    Ralph

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • How can I install Photoshop CC on my D drive? Thanks!

    How can I install Photoshop CC on my D drive? Thanks

    Hi Jim,
    You need to change the preferences in the Creative Cloud desktop from default to:  D:\

  • How can I install Mongolian keyboard on my imac

    how can I install Mongolian keyboard on my imac

    I have some you can try:
    https://dl.dropboxusercontent.com/u/46870715/k/MongolianC.zip
    You unzip and put the .keylayout files in /Library/Keyboard Layouts and then logout/login and then check their box in system preferences/language & text/input sources and then select them in the "flag" menu at the top right of the screen.

  • How can I install internet explorer on my iMac?

    How can I install internet explorer on my iMac?

    WZZZ wrote:
    Nope didn't notice that. No idea what it was doing in the list of current discussions--I guess it was one of those old threads that wakes from the dead and reappears out of nowhere.
    Yep. The wonderful, wacky world of Jive.

  • How do I install Mountain Lion on a thumb drive?

    How do I install Mountain Lion on a thumb drive when my computer is running Mavericks? I downloaded the Mountain Lion installer, but when I attempt to run it I get a message that says "You cannot install OS X 10.8 on this computer." I don't want to install it on the computer, I want to install it on the thumb drive—but it won't give me a choice of drives.
    The reason I want to do this is I want to be able to boot my iMac into Mountain Lion in order to test a hardware/software combination I suspect might be incompatible with Mavericks.
    (Note: there are plenty of instructions online for how to create a bootable thumb drive with the Mountain Lion installer, but that's not what I want. I want to install ML on the thumb drive itself.)

    Sure you have a proper installer application. When I start it I get:
    Clicking on Continue, then accepting the licensing stuff, gets me to:
    If you click on Show All Disks, then all mounted disks will be presented including your flash drive.
    Now the above is a Mavericks installer, but it's the same for Mountain Lion.

  • How do I install photoshop elements without a disk drive

    How do I install photoshop elements without a disk drive. My Mac does not have one and have just bought Elements

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How do i install adobe reader on a flash drive?????

    how do i install adobe reader on a flash drive?

    I don't know if this will work; it will certainly not create a "portable" Adobe Reader.
    But it may install on the flash driver, to be used only on the computer that installed it.
    Download and run the offline installer from http://get.adobe.com/reader/enterprise/
    On the Reader setup panel, click on 'Change Destination Folder' and select your flash drive.
    Let us know how that goes; I am curious...

  • How do you install logic on the new imac if there is no disk drive?

    How do you install logic on the new imac if there is no disk drive?

    Dj Generator wrote:
    [There] must be other options, i would rather not spend £70 on a disk drive or £140 on the software again??
    Hmmm? A quick google search for external optical readers turns up many in the $20-$40 (USD) range. Didn't convert to £ or include any VAT charges, but you should be able to get something significantly cheaper than £70. That's your simplest solution.
    iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

  • How can I install ntfs on an external hard drive so that my Samsung Smart TV can see my media files? Or is there a better option?

    How can I install ntfs on an external hard drive so that my Samsung Smart TV can see my media files? Or is there a better option?

    OS X cannot natively write to a drive formatted as NTFS, nor can it format a drive as NTFS. There are third-party NTFS drivers available on the market.
    Just out of curiosity: Even with NTFS, how is your TV going to access the external hard drive? Does the TV have a USB port?

Maybe you are looking for

  • Printer CD will not install software and drivers

    Laptop: Acer Aspire 3690 series Model: BL50 OS: Windows Vista SP2 Home Basic (32 bit) Printer: HP Desktop F4100 series *To my knowledge both laptop and printer are old models, with the laptop being as old as 7 years. Short Story: After formatting my

  • Issue starting the soa suite 11g- windows 7 64bit

    Hi all, After successfull installation of oracle soa suite 11g 11.1.1.3 in my windows 64 bit machine, im unable to start the weblogic server pls find the log details. C:\Oracle\Middleware\home_ps2\user_projects\domains\domain1>startWebLogic.cmd ** Se

  • Inserted value too large for column

    Hi, I have a table (desc below), with only one trigger wich fill the operatcreat, operatmodif, datecreat and datemodif column at insert and update for each row. When I try to insert, I got the following messages : INSERT INTO tarifclient_element(tari

  • How to insert data using jdeveloper 11g

    hi all.. i'm starting my first web aplication using JSF in jdeveloper 11g. I have one table in the database has two attributes(id and name). i connected to the database succrssfuly. i built adf application and created JSF page then i draged my view f

  • PS CC 14.2: Linked Smart Objects workflow

    I like the idea of the Linked smart objects. Just a question about possible workflow. I work with large layered docs in the 2+GB range. It can get slow, particularly saving and opening. Idea 1) I use textures on seperate layers. Just by lining the PL