How do I install RAM on my 24" 2.8 GHz Intel iMac?

I've got two 2GB chips.
Many thanks!

Hi,
This should help you out.....
http://support.apple.com/kb/ht1423#2

Similar Messages

How can I connect first generation ipod with 2.4 Ghz Intel iMac running Lion

I there,
I'm trying to connect my first generation ipod with my iMac (intel 2.4 Ghz), which is running Lion, however when I connect the wifi, it only showing that battery is charging with a tick and OK to Disconnect. I open itunes but it doesn't find my ipod neither. Any suggestions?
Cheers,
Joe

Start by working through each and every troubleshooting suggestion offered in this Apple support document related to your issue.
iPod not recognized in iTunes and Mac desktop
B-rock

How do I install Windows XP with boot camp assistant, on my IMac?

How do I install Windows XP with boot camp assistant, on my IMac?

Lion cannot BootCamp XP.
You can install XP under virtual machine software (Parallels, VM Fusion, VirtualBox).
And Windows 7 Pro has XP mode. XP will requires probably days of pathing after install and will be completely unsupported by MS within 1 year, but Windows 7 Pro still has great support from MS.

How do I install my CS 5.5 disk on my new imac that doesn't have a disk drive? Can I download it? I have my serial number. Please help!!

How do I install my CS 5.5 disk on my new imac that doesn't have a disk drive? Can I download it? I have my serial number. Please help!!

Usually means a corrupt download. Try re-downloading.
Alternative: Download Adobe CS5.5 Trials: Direct Links (no Assistant / Manager) | ProDesignTools

HT1338 How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?

How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?

Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 to current has required OSX 10.6+
https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
https://www.mozilla.org/en-US/firefox/17.0/system-requirements/

How do I install snow leopard on a 2.1 ghz macbook with 10.5.8 Leopard installed? I have a 10.6.2 unstall disk. It says it can't install snow leopard on this computer.

How do I install Snow Leopard on my Macbook 2.1 ghz, with 10.5.8 Leopard installed?
I have the install disk for Snow Leopard 10.6.2, but when using it for installation, it
states that "Snow Leopard cannot be installed on this computer"!
I understand some features of iOS5 cannot be used unless my iMac and Macbook have
10.7 Lion installed. Correct?

It sounds like your Snow Leopard install disk is the disk that came with another model of Mac (grey lable with no pictures). If so, that's not legal and won't work. You need a retail (white label with the picture of a snow leopard) copy of the installer for each system that didn't come with Snow Leopard.
Regards.

How do I install a new Canon MG3500 series printer on my IMac?

How do I install a new Canon MG 3500 series printer on my IMac? When I click on the cd rom icon I get a menu and I do not know what to do then.

For 10.6 see > Mac 101: Printing (Mac OS X v10.6)
For 10.8 see > OS X Mountain Lion: Set up a printer
For 10.9 see > OS X Mavericks: Set up a printer

How do I install a program from a dvd on my new imac

How do I install a new program from a dvd on my new iMac?

Buy an external USB optical drive like the Apple USB SuperDrive.
Use another Mac with an optical drive by using Target Disk Mode.
Borrow a Mac with an optical drive and clone the DVD to a USB flash drive.

My G5 iMac died how do I move iTunes that I bought to my new Intel iMac

I was able to save the hard drive from my dead G5 iMac and it's now a bootable image on an external firewire drive.
How can I move all my iTunes that I bought to my new Intel iMac?
BTW from what I've read you shouldn't use Migration Assistant when moving from a PPC to an Intel Mac so I don't think I want to go that route.
Any ideas as to how I can do this and not lose all my iTunes that I bought?

i think this should work:
1) boot from the image.
2) use these tips to move the library from the image to another external HD. from the iMac, use the +choose library+ operation below.
or
3) if you have a suitably sized iPod, click here.
or
4) drag & drop the entire iTunes folder to the iMac. put it in the proper location on the iMac in HD/users/your_name/music (overwrite the iTunes folder there - presumably void of any content right now). when done, on the iMac, launch iTunes with the option key pressed. you will see this window
click on +choose library+ and navigate to the +iTunes library file+ (inside the iTunes folder you just dragged & dropped).
any help ?

Installing an existing copy of CS3 to new Intel iMac

I want to install CS3 on my new Intel iMac (moving from my almost defunct PPC G5 tower) which will run Snow Leopard.
I understand using the migrate feature may not be a good idea.
Problem is, I have the CS3 upgrade disc. I do have my original CS full version.
Will the CS version install on an Intel Mac? I was planning on installing CS
and then upgrading with my CS3 disk. Will this work? If not please suggest another method.
I have PS7 and CS full install disks and CS2 and CS3 update disks.
Thanks

You should only need the serial number from the version you upgraded from. If you went from CS to CS3 then have the CS serial and disk handy.
I don't remember if the installer wants you to pop the CS disk in for verification or not.
Bob

Ram Problem in Macbookpro 2.16 GHz Intel Core 2 Duo

Hi, could anyone help me please with the following:
My my MacBookPro 2.16 GHz Intel Core 2 Duo ran with 1 Gb Ram. I've upgraded at an Official Macstore in Romania, to 4 Gb Ram. After two months suddenly I have Kernel Panics (full shutdown of computer in whatever program I use, like firefox, finalcut, transfering data to a disk, all possible situations have caused the grey screen to drop) as the reports show, with a variety of reasons, mostly linked to the programs I was using at the moment - but it did it, as mentioned, with all kinds of programs.
I reinstalled the OS, same situation. I exchanged my Hard Disk, same situation. Checked ventilators, heatsinks, etc etc., nothing ch
So lastly, I exchanged Ram units from slots, same situation. Then I decided to test the individual Ram units. What gives? It works perfectly with only one slot in use with one unit of 2 Gb Ram. Doesn't matter what slot, doesn't matter what Ram I use, it works as long as I don't put both Ram units at the same time. ld
Could anyone please give me an explanation for this strange phenomenon? The thing is, I need the extra Ram for HD video editting, so I am desperate.
Also: what could cause this problem? Is it something I can exchange/repair etc?
Thank you very much,
tudor

Hi,
Your MBP identifier is 1,1?
if so please check spec for ram
http://www.everymac.com/systems/apple/macbook_pro/stats/macbook_pro_2.16.html
I found out that this model supports only 2 Gb of memory
Cheers

RAM upgrade for MBP 2.2 GHz Intel Core 2 Duo

I have a MBP 2.2 GHz Intel Core 2 Duo currently with 2 GB of RAM and with all the work I do on it I would like to upgrade to 4 GB. Purchasing the RAM through Apple is out of the question because it so expensive.
I would like to know what is the best brand to buy and on what website.. Is an upgrade to 4 GB possible for my MBP? It looks like I have my "Bank 0/DIMM0" filled with 1 GB DDR2 SDRAM 667 MHz and my "Bank 1/DIMM1" filled with the same thing. Does this mean that both of my RAM slots are full AND if I want to upgrade my RAM I'll have to purchase 2 sets of 2 GB RAM? Please help as I am new to all of the tech stuff...
Another side note... I've noticed that some discussions have stated that some MBP are only upgradable to 3 GB of RAM, but I'm pretty sure that I can upgrade mine to 4 GB of RAM. Can anyone shed any light on this?
Your help is much appreciated...

yes, both of your RAM slots are full, so to get 4GB you will have to get 2 2GB sticks. Having the same model I can safely assure you that it will recognize all 4GB of the new Ram.
as for brands, there have been many I have seen recommended on this board, but one name seems to pop up consistently is Kensington, I picked up my ram from the store I bought my laptop at, so I couldn't recommend a site, sorry

How do i install from dvd without a dvd drive on my imac

i have installed Parallel 8 on my imac and now want to install windows 7 and office but i dont have a dvd drive. how do i do this?

Get an external USB optical drive.

How do I install iWork from my old MacBook on my new iMac?

I bought a multi license iWork cd back in 2009 and I want to install it on my new iMac. Is there any way to install it without using the remote disk option? Thanks!

Assuming you have one of the new models without an optical drive, you can either use remote disk from your older MacBook or buy a DVD player to attach to the new iMac...not a bad option if you are planning to burn DVDs.
You could also try to create a USB flash drive copy of the iWork disk and use that for the installation.

How can I install purchased Apps from my ipad to my New imac? I have some Troubles to find and install.

Hi,
I have some trouble to find and install
my purchased Apps which I use on my Ipad
since 1 Year ago.
I also use the actually Itunes Version.
:-) Thanks for helping.
Edmund-sky

File>Devices>Transfer Purchases

How do I install RAM on my 24" 2.8 GHz Intel iMac?

Similar Messages

Maybe you are looking for